bcm63xx: add support for the HSSPI controller

[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.3 / 511-board_V2500V.patch

diff --git a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
index 37886892e1cd9f59d21ae170ae0621839cfaad82..e299cc6dba1f238740cd97f006c16f9d2ac7a59b 100644 (file)
--- a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
+++ b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -318,6 +318,63 @@ static struct board_info __initdata boar
+@@ -320,6 +320,63 @@ static struct board_info __initdata boar
        },
  };
  
@@ -56,7 +56,7 @@
 +                      .active_low     = 1,
 +                      .type           = EV_KEY,
 +                      .code           = KEY_RESTART,
-+                      .threshold      = 3,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 +              },
 +      },
 +};
@@ -64,7 +64,7 @@
  #endif
  
  /*
-@@ -1784,6 +1841,7 @@ static const struct board_info __initdat
+@@ -1786,6 +1843,7 @@ static const struct board_info __initdat
        &board_96348_D4PW,
        &board_spw500v,
        &board_96348sv,
@@ -72,9 +72,9 @@
  #endif
  
  #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1937,6 +1995,22 @@ void __init board_prom_init(void)
-       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-       val &= MPI_CSBASE_BASE_MASK;
+@@ -1944,6 +2002,22 @@ void __init board_prom_init(void)
+               val &= MPI_CSBASE_BASE_MASK;
+       }
        boot_addr = (u8 *)KSEG1ADDR(val);
 +      printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
 +
@@ -95,17 +95,27 @@
  
        /* dump cfe version */
        cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
-@@ -2154,6 +2228,13 @@ int __init board_register_devices(void)
-       val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-       val &= MPI_CSBASE_BASE_MASK;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -18,6 +18,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
  
-+      /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+      /* Loading from CFE always uses Bank 0 */
-+      if (!strcmp(board.name, "V2500V_BB")) {
-+              printk(KERN_INFO PFX "V2500V: Start in Bank 0\n");
-+              val = val + 0x400000; // Select Bank 0 start address
-+      }
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+ #include <bcm63xx_dev_hsspi.h>
+@@ -126,6 +127,13 @@ int __init bcm63xx_flash_register(void)
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+               val &= MPI_CSBASE_BASE_MASK;
+ 
++              /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++              /* Loading from CFE always uses Bank 0 */
++              if (!strcmp(board_get_name(), "V2500V_BB")) {
++                      pr_info("V2500V: Start in Bank 0\n");
++                      val = val + 0x400000; // Select Bank 0 start address
++              }
 +
-       mtd_resources[0].start = val;
-       mtd_resources[0].end = 0x1FFFFFFF;
+               mtd_resources[0].start = val;
+               mtd_resources[0].end = 0x1FFFFFFF;