u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
{
struct ssb_bus *bus = cc->dev->bus;
+@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ return 0;
+ }
+ }
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++ u32 pmu_ctl = 0;
++
++ switch (cc->dev->bus->chip_id) {
++ case 0x4322:
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++ if (spuravoid == 1)
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++ else
++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++ break;
++ case 43222:
++ /* TODO: BCM43222 requires updating PLLs too */
++ return;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++ cc->dev->bus->chip_id);
++ return;
++ }
++
++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,18 @@
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
struct list_head list;
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -590,7 +590,10 @@ struct ssb_chipcommon {
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
+ #define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+ #define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
++#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
+ #define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+ #define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+ #define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+@@ -590,7 +591,10 @@ struct ssb_chipcommon {
u32 status;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -630,8 +633,7 @@ enum ssb_clkmode {
+@@ -630,8 +634,7 @@ enum ssb_clkmode {
extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
enum ssb_clkmode mode);
void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
-@@ -644,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+@@ -644,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+@@ -663,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+
+ #endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_driver_extif.h
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -152,12 +152,16 @@
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
+ #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
+ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
++#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
++#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
++#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
+ #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
+ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+ #define SSB_SPROM4_AGAIN0_SHIFT 0
@@ -485,7 +485,7 @@
#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
+ return wdt->driver_data;
+}
+#endif /* LINUX_BCM47XX_WDT_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+- /* FIXME */
++ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++ avoid);
+ break;
+ #endif
+ }
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+ return (s8)gain;
+ }
+
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++ SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+ int i;
+@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+ SSB_SPROM1_ITSSI_A_SHIFT);
+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+- if (out->revision >= 2)
+- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+
+@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
++ if (out->revision >= 2)
++ sprom_extract_r23(out, in);
+ }
+
+ /* Revs 4 5 and 8 have partially shared layout */
projects / openwrt / svn-archive / archive.git / blobdiff