kernel: update linux 3.7 to 3.7.3

[openwrt/svn-archive/archive.git] / target / linux / ramips / base-files / etc / uci-defaults / leds

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
index f87a64faef8f0bf6230955fe475e3d525282485e..fa9c4f0ab4e7d982f8533858d1cd56930504217b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -1,67 +1,56 @@
 #!/bin/sh
 
+. /lib/functions/uci-defaults.sh
 . /lib/ramips.sh
 
 set_usb_led() {
-       local sysfs="$1"
-
-       uci batch <<EOF
-set system.usb_led=led
-set system.usb_led.name='usb'
-set system.usb_led.sysfs='$sysfs'
-set system.usb_led.trigger='usbdev'
-set system.usb_led.dev='1-1'
-set system.usb_led.interval='50'
-commit system
-EOF
+       ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
 }
 
 set_wifi_led() {
-       local sysfs="$1"
-
-       uci batch <<EOF
-set system.wifi_led=led
-set system.wifi_led.name='wifi'
-set system.wifi_led.sysfs='$sysfs'
-set system.wifi_led.trigger='netdev'
-set system.wifi_led.dev='wlan0'
-set system.wifi_led.mode='link rx tx'
-commit system
-EOF
-}
-
-set_wan_led() {
-       local sysfs="$1"
-       local name="$2"
-       local trigger="$3"
-       local dev="$4"
-       local mode="$5"
-
-       uci batch <<EOF
-set system.${name}_led=led
-set system.${name}_led.name='$name'
-set system.${name}_led.sysfs='$sysfs'
-set system.${name}_led.trigger='$trigger'
-set system.${name}_led.dev='$dev'
-set system.${name}_led.mode='$mode'
-commit system
-EOF
+       ucidef_set_led_netdev "wifi_led" "wifi" "$1" "wlan0"
 }
 
 board=$(ramips_board_name)
 
 case $board in
+       3g-6200n)
+               set_wifi_led "edimax:amber:wlan"
+               set_usb_led "edimax:blue:3g"
+               ;;
+       air3gii)
+               set_wifi_led "airlive:green:wlan"
+               set_usb_led "airlive:green:mobile"
+               ;;
        all0256n)
+               ucidef_set_rssimon "wlan0" "40000" "1"
+               ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+               ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+               ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
                set_wifi_led "rt2800pci-phy0::radio"
                ;;
        bc2)
                set_usb_led "bc2:blue:usb"
                ;;
+       broadway)
+               set_usb_led "red:diskmounted"
+               set_wifi_led "red:wps_active"
+               ;;
+       br6524n)
+               set_wifi_led "edimax:blue:wlan"
+               ;;
        dir-300-b1|\
        dir-600-b1|\
-       dir-600-b2)
+       dir-600-b2|\
+       dir-620-a1)
                # ANDed with vlan switch port 4 led state
-               set_wan_led "d-link:amber:wan" wan_switch default-on
+               ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1"
+               set_wifi_led "rt2800pci-phy0::radio"
+               ;;
+       dir-615-d|\
+       dir-615-h1)
+               ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0"
+               set_wifi_led "rt2800pci-phy0::radio"
                ;;
        esr-9753)
                set_wifi_led "rt2800pci-phy0::radio"
@@ -73,14 +62,19 @@ case $board in
                set_usb_led "f5d8235v2:blue:storage"
                ;;
        fonera20n)
-               set_usb_led "fonera20n:amber:usb"
+               set_usb_led "fonera20n:orange:usb"
+               set_wifi_led "fonera20n:orange:wifi"
                ;;
+       all0239-3g|\
        hw550-3g)
                set_usb_led "hw550-3g:green:usb"
                ;;
        mofi3500-3gn)
                set_usb_led "mofi3500-3gn:green:usb"
                ;;
+       mzk-w300nh2)
+               set_wifi_led "mzkw300nh2:amber:wlan"
+               ;;
        nw718)
                set_usb_led "nw718:amber:usb"
                ;;
@@ -101,3 +95,7 @@ case $board in
                set_usb_led "wcr150gn:amber:user"
                ;;
 esac
+
+ucidef_commit_leds
+
+exit 0