lantiq: add 3.18 support

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / MT7620a.dts

diff --git a/target/linux/ramips/dts/MT7620a.dts b/target/linux/ramips/dts/MT7620a.dts
index 773ac51fb65f5498f3ccbf53e89a6c8091c65268..826441e63313efa44f7f42fdae53f8d9f56ba235 100644 (file)
--- a/target/linux/ramips/dts/MT7620a.dts
+++ b/target/linux/ramips/dts/MT7620a.dts
@@ -6,29 +6,10 @@
        compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
        model = "Ralink MT7620a + MT7610e evaluation board";
 
-       memory@0 {
-               reg = <0x0 0x2000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "spi", "uartlite", "mdio", "wled", "ephy", "rgmii1", "rgmii2";
-                       ralink,gpiomux = "i2c", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
                spi@b00 {
                        status = "okay";
-               
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
@@ -63,19 +44,31 @@
                };
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        ethernet@10100000 {
                status = "okay";
-               
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+               ralink,port-map = "llllw";
+
                port@4 {
-                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
-                       reg = <4>;
+                       status = "okay";
                        phy-mode = "rgmii";
                        phy-handle = <&phy4>;
                };
 
                port@5 {
-                       compatible = "lantiq,mt7620a-gsw-port", "ralink,eth-port";
-                       reg = <5>;
+                       status = "okay";
                        phy-mode = "rgmii";
                        phy-handle = <&phy5>;
                };
@@ -96,7 +89,6 @@
        };
 
        gsw@10110000 {
-               status = "okay";
                ralink,port4 = "gmac";
        };
 
@@ -124,4 +116,12 @@
                        linux,code = <0x101>;
                };
        };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
 };