ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / NW718.dts
index 4681e96..ec8c017 100644 (file)
@@ -1,33 +1,19 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "NW718", "ralink,rt3050-soc";
        model = "Netcore NW718";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,gpiomux = "i2c";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
                spi@b00 {
                        status = "okay";
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "mx25l3205d";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "mx25l3205d";
                                spi-max-frequency = <25000000>;
                };
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+               mediatek,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                cpu {
                        label = "nw718:amber:cpu";
                        gpios = <&gpio0 13 1>;
                };
+
                usb {
                        label = "nw718:amber:usb";
                        gpios = <&gpio0 8 1>;
                };
+
                wps {
                        label = "nw718:amber:wps";
                        gpios = <&gpio0 14 1>;
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
                };
        };
 
-       wmac@10180000 {
-               status = "okay";
-       };
-
        otg@101c0000 {
                status = "okay";
        };