ramips: enable second SPI for VoCore

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / OMNI-EMB-HPM.dts

diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
index 11cf0634e2404b4fc46826239716ed806e5ff36e..4f4ecd492be157e13c42166989a018b1d6b69539 100644 (file)
--- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts
+++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
@@ -6,30 +6,11 @@
        compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
        model = "Omnima EMB HPM";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x10000000>;
-       };
-
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite", "spi";
-                       ralink,gpiomux = "i2c", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               timer@100 {
-                       status = "okay";
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
                spi@b00 {
                        status = "okay";
 
@@ -53,7 +34,7 @@
                                        read-only;
                                };
 
-                               partition@40000 {
+                               factory: partition@40000 {
                                        reg = <0x00040000 0x00010000>;
                                        label = "factory";
                                        read-only;
@@ -67,11 +48,19 @@
                };
        };
 
-       ethernet@10100000 {
-               status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
 
+       ethernet@10100000 {
                phy-handle = <&phy0>;
                phy-mode = "rgmii";
+               mtd-mac-address = <&factory 0x28>;
 
                mdio-bus {
                        status = "okay";
@@ -83,7 +72,7 @@
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        ehci@101c0000 {