ramips: enable second SPI for VoCore

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / OMNI-EMB-HPM.dts

diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
index 4692d3ed1b6081fb6e1f746db5bda8f3649a6df6..4f4ecd492be157e13c42166989a018b1d6b69539 100644 (file)
--- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts
+++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
@@ -6,48 +6,73 @@
        compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
        model = "Omnima EMB HPM";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x10000000>;
+       chosen {
+               bootargs = "console=ttyS0,115200";
        };
 
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite", "spi";
-                       ralink,gpiomux = "i2c", "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               timer@100 {
-                       status = "okay";
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
                spi@b00 {
                        status = "okay";
 
                        m25p80@0 {
+                               compatible = "macronix,mx25l12805d";
+                               spi-max-frequency = <25000000>;
+                               reg = <0>;
+
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "mx25l6405d";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <25000000>;
+
+                               partition@0 {
+                                       reg = <0x0 0x0030000>;
+                                       label = "u-boot";
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       reg = <0x00030000 0x00010000>;
+                                       label = "config";
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       reg = <0x00040000 0x00010000>;
+                                       label = "factory";
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       reg = <0x00050000 0x00fb0000>;
+                                       label = "firmware";
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "uartf";
+                               ralink,function = "gpio";
                        };
                };
        };
 
        ethernet@10100000 {
-               status = "okay";
-               ralink,phy-mask = <0x10>;
+               phy-handle = <&phy0>;
                phy-mode = "rgmii";
+               mtd-mac-address = <&factory 0x28>;
+
+               mdio-bus {
+                       status = "okay";
+
+                       phy0: ethernet-phy@4 {
+                               reg = <4>;
+                       };
+               };
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        ehci@101c0000 {
@@ -72,7 +97,7 @@
 
        gpio-leds {
                compatible = "gpio-leds";
-               
+
                power {
                        label = "emb:orange:power";
                        gpios = <&gpio0 7 1>;