ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / RT-N15.dts

diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts
index 27b0da97fe414af116072387ebee72aa736bf3ee..638aba741351d9534733c2fc5eb9b4e3ae5457ae 100644 (file)
--- a/target/linux/ramips/dts/RT-N15.dts
+++ b/target/linux/ramips/dts/RT-N15.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
 
 / {
        #address-cells = <1>;
@@ -9,22 +9,23 @@
        model = "Asus RT-N15";
 
        palmbus@300000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,gpiomux = "i2c";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
                gpio0: gpio@600 {
                        status = "okay";
                };
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartlite", "mdio";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -35,18 +36,21 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };
-               partition@40000 {
+
+               factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };
+
                partition@50000 {
-                       label = "linux";
+                       label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
        };
@@ -55,8 +59,17 @@
                status = "okay";
                mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
-                       ralink,fixed-link = <1000 1 1 1>;
+               port@0 {
+                       mediatek,fixed-link = <1000 1 1 1>;
+               };
+
+               mdio-bus {
+                       status = "okay";
+
+                       phy0: ethernet-phy@0 {
+                               phy-mode = "mii";
+                               reg = <0>;
+                       };
                };
        };
 
@@ -66,16 +79,22 @@
                gpio-sck = <&gpio0 2 0>;
        };
 
+       wmac@480000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 0>;
                        linux,code = <0x211>;
                };
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 12 0>;