ralink: reduce access to uncached tx/rx dma ring buffer

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / TEW-692GR.dts

diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
index f5d0d04845af6d04bd17c4e60868573301a696e8..6e43c7c6ba3a3e459f46f1e8656cecb590a8ff08 100644 (file)
--- a/target/linux/ramips/dts/TEW-692GR.dts
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -7,36 +7,48 @@
        model = "TRENDnet TEW-692GR";
 
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "uartlite";
-                       ralink,gpiomux = "i2c", "jtag", "spi";
-                       ralink,uartmux = "gpio";
-                       ralink,pcimux = "pci-fnc";
-                       ralink,wdtmux = <1>;
-               };
-
-               timer@100 {
-                       status = "okay";
-               };
-
-               gpio0: gpio@600 {
+               gpio1: gpio@638 {
                        status = "okay";
                };
+       };
 
-               gpio1: gpio@638 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
        };
 
        ethernet@10100000 {
                status = "okay";
-               ralink,phy-mask = <0x1>;
-               phy-mode = "rgmii";
+               mtd-mac-address = <&factory 0x28>;
+               port@0 {
+                       phy-handle = <&phy0>;
+                       phy-mode = "rgmii";
+               };
+               mdio-bus {
+                       status = "okay";
+
+                       phy0: ethernet-phy@0 {
+                               reg = <0>;
+                       };
+               };
        };
 
        pci@10140000 {
                status = "okay";
 
+               pinctrl-names = "default";
+               pinctrl-0 = <&pci_pins>;
+               pci_pins: pci {
+                       pci {
+                               ralink,group = "pci";
+                               ralink,function = "pci-fnc";
+                       };
+               };
+
                host-bridge {
                        pci-bridge@1 {
                                status = "okay";
@@ -45,7 +57,6 @@
        };
 
        wmac@10180000 {
-               status = "okay";
                ralink,5ghz = <0>;
        };
 
@@ -69,7 +80,7 @@
                        read-only;
                };
 
-               partition@40000 {
+               factory: partition@40000 {
                        reg = <0x00040000 0x00010000>;
                        label = "factory";
                        read-only;