ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WCR150GN.dts

diff --git a/target/linux/ramips/dts/WCR150GN.dts b/target/linux/ramips/dts/WCR150GN.dts
index 93c7985ff09e87be91720441a80a75c29f034240..380af7d558989fb016be58d114887c26ff52489e 100644 (file)
--- a/target/linux/ramips/dts/WCR150GN.dts
+++ b/target/linux/ramips/dts/WCR150GN.dts
@@ -3,22 +3,12 @@
 /include/ "rt3050.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "WCR150GN", "ralink,rt3052-soc";
        model = "Sparklan WCR-150GN";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
-       };
-
        palmbus@10000000 {
                sysc@0 {
-                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
                        ralink,uartmux = "gpio";
                        ralink,wdtmux = <1>;
                };
@@ -36,6 +26,29 @@
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
 
        gpio-leds {