/dts-v1/;
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
spi@b00 {
status = "okay";
-
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "en25q64";
+ compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@50000 {
label = "firmware";
- reg = <0x50000 0x6b0000>;
- };
-
- partition@700000 {
- label = "usercfg";
- reg = <0x700000 0x100000>;
+ reg = <0x50000 0x7b0000>;
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
-
- ralink,port-map = "llllw";
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "llllw";
};
gsw@10110000 {
- ralink,port4 = "ephy";
+ mediatek,port4 = "ephy";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pcie@10140000 {
+ status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
+
power {
- label = "buffalo:red:power";
+ label = "whr-600d:red:power";
gpios = <&gpio0 7 1>;
};
- status {
- label = "buffalo:green:status";
+
+ wifi {
+ label = "whr-600d:green:wifi";
gpios = <&gpio0 8 1>;
};
+
power2 {
- label = "buffalo:green:power";
+ label = "whr-600d:green:power";
gpios = <&gpio0 9 1>;
};
- status2 {
- label = "buffalo:orange:status";
+
+ wifi2 {
+ label = "whr-600d:orange:wifi";
gpios = <&gpio0 10 1>;
};
+
internet {
- label = "buffalo:green:internet";
+ label = "whr-600d:green:internet";
gpios = <&gpio2 17 1>;
};
+
router {
- label = "buffalo:green:router";
+ label = "whr-600d:green:router";
gpios = <&gpio2 18 1>;
};
+
router2 {
- label = "buffalo:orange:router";
+ label = "whr-600d:orange:router";
gpios = <&gpio2 19 1>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
- s1 {
+
+ reset {
label = "reset";
gpios = <&gpio2 12 1>;
- linux,code = <0x100>;
+ linux,code = <0x198>;
};
- s2 {
+
+ aoss {
label = "aoss";
gpios = <&gpio2 13 1>;
- linux,code = <0x101>;
+ linux,code = <0x211>;
};
- s3 {
+
+ ap {
label = "ap";
gpios = <&gpio2 14 1>;
- linux,code = <0x102>;
+ linux,code = <0x100>;
+ linux,input-type = <5>; /* EV_SW */
};
- s4 {
+
+ bridge {
label = "bridge";
gpios = <&gpio2 15 1>;
- linux,code = <0x103>;
+ linux,code = <0x100>;
+ linux,input-type = <5>; /* EV_SW */
};
};
};