ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WHR-600D.dts

diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
index 92fc051856930e0263cefcd38e965ad050ca0dcb..e3d94c0aab5c0327077f0992e89eb8985a073766 100644 (file)
--- a/target/linux/ramips/dts/WHR-600D.dts
+++ b/target/linux/ramips/dts/WHR-600D.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "mt7620a.dtsi"
+#include "mt7620a.dtsi"
 
 / {
        compatible = "ralink,mt7620a-soc";
@@ -17,7 +17,7 @@
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "en25q64";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "mx25l6405d";
                                spi-max-frequency = <10000000>;
@@ -42,12 +42,7 @@
 
                                partition@50000 {
                                        label = "firmware";
-                                       reg = <0x50000 0x6b0000>;
-                               };
-
-                               partition@700000 {
-                                       label = "usercfg";
-                                       reg = <0x700000 0x100000>;
+                                       reg = <0x50000 0x7b0000>;
                                };
                        };
                };
@@ -65,42 +60,57 @@
        ethernet@10100000 {
                pinctrl-names = "default";
                pinctrl-0 = <&ephy_pins>;
-
-               ralink,port-map = "llllw";
+               mtd-mac-address = <&factory 0x4>;
+               mediatek,portmap = "llllw";
        };
 
        gsw@10110000 {
-               ralink,port4 = "ephy";
+               mediatek,port4 = "ephy";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       pcie@10140000 {
+               status = "okay";
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
-                       label = "buffalo:red:power";
+                       label = "whr-600d:red:power";
                        gpios = <&gpio0 7 1>;
                };
-               status {
-                       label = "buffalo:green:status";
+
+               wifi {
+                       label = "whr-600d:green:wifi";
                        gpios = <&gpio0 8 1>;
                };
+
                power2 {
-                       label = "buffalo:green:power";
+                       label = "whr-600d:green:power";
                        gpios = <&gpio0 9 1>;
                };
-               status2 {
-                       label = "buffalo:orange:status";
+
+               wifi2 {
+                       label = "whr-600d:orange:wifi";
                        gpios = <&gpio0 10 1>;
                };
+
                internet {
-                       label = "buffalo:green:internet";
+                       label = "whr-600d:green:internet";
                        gpios = <&gpio2 17 1>;
                };
+
                router {
-                       label = "buffalo:green:router";
+                       label = "whr-600d:green:router";
                        gpios = <&gpio2 18 1>;
                };
+
                router2 {
-                       label = "buffalo:orange:router";
+                       label = "whr-600d:orange:router";
                        gpios = <&gpio2 19 1>;
                };
        };
@@ -110,25 +120,31 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
-               s1 {
+
+               reset {
                        label = "reset";
                        gpios = <&gpio2 12 1>;
-                       linux,code = <0x100>;
+                       linux,code = <0x198>;
                };
-               s2 {
+
+               aoss {
                        label = "aoss";
                        gpios = <&gpio2 13 1>;
-                       linux,code = <0x101>;
+                       linux,code = <0x211>;
                };
-               s3 {
+
+               ap {
                        label = "ap";
                        gpios = <&gpio2 14 1>;
-                       linux,code = <0x102>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
                };
-               s4 {
+
+               bridge {
                        label = "bridge";
                        gpios = <&gpio2 15 1>;
-                       linux,code = <0x103>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
                };
        };
 };