ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WHR-G300N.dts

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
index 8cec31e03399955ed2f6bf7adb8105c73c876c61..e3eee41cebcf3a015bb8b069125e2c5abca3e6a8 100644 (file)
--- a/target/linux/ramips/dts/WHR-G300N.dts
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "WHR-G300N", "ralink,rt3052-soc";
@@ -18,7 +18,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -26,19 +25,27 @@
        };
 
        esw@10110000 {
-               ralink,portmap = <0x2f>;
+               mediatek,portmap = <0x2f>;
        };
 
+       /* FIXME: no partitions defined */
+/*     wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+*/
        gpio-leds {
                compatible = "gpio-leds";
+
                diag {
                        label = "whr-g300n:red:diag";
                        gpios = <&gpio0 7 1>;
                };
+
                router {
                        label = "whr-g300n:green:router";
                        gpios = <&gpio0 9 1>;
                };
+
                security {
                        label = "whr-g300n:amber:security";
                        gpios = <&gpio0 14 1>;
@@ -50,21 +57,25 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                aoss {
                        label = "aoss";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
+
                router-off {
                        label = "router-off";
                        gpios = <&gpio0 11 1>;
                        linux,code = <0x102>;
                };
+
                router-on {
                        label = "router-on";
                        gpios = <&gpio0 8 1>;