ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WL-351.dts

diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
index f73a01a5cb68b7d619c6e8e4366f4ac52b6fa2fe..605c73b4609af46c35da7714b2adc7e0194d7c59 100644 (file)
--- a/target/linux/ramips/dts/WL-351.dts
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -1,53 +1,58 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "WL-351", "ralink,rt3052-soc";
        model = "Sitecom WL-351 v1 002";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii";
-                       ralink,gpiommux = "i2c", "spi", "mdio";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
-
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3f>;
+               mediatek,portmap = <0x3f>;
                ralink,fct2 = <0x0002500c>;
                /*
                 * ext phy base addr 31, rx/tx clock skew 0,
@@ -59,7 +64,7 @@
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        otg@101c0000 {
@@ -68,17 +73,20 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                power {
                        label = "wl-351:amber:power";
-                       gpio = <&gpio0 8 1>;
+                       gpios = <&gpio0 8 1>;
                };
+
                unpopulated {
                        label = "wl-351:amber:unpopulated";
-                       gpio = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 1>;
                };
+
                unpopulated2 {
                        label = "wl-351:blue:unpopulated";
-                       gpio = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 1>;
                };
        };
 
@@ -87,20 +95,22 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
-                       gpio = <&gpio0 10 1>;
+                       gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
-                       gpio = <&gpio0 0 1>;
+                       gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
        };
 
        rtl8366rb {
-               compatible = "rtl8367rb";
+               compatible = "rtl8366rb";
                gpio-sda = <&gpio0 1 0>;
                gpio-sck = <&gpio0 2 0>;
        };