ramips: Add hex prefix (0x) to dtsi reg properties where needed.

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / mt7628an.dtsi

diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi
index 754e04fcd5de5e2dff767b0edfb9a80f093c9739..98496e325d984a4154d1837ea7d5b04b4d54703c 100644 (file)
--- a/target/linux/ramips/dts/mt7628an.dtsi
+++ b/target/linux/ramips/dts/mt7628an.dtsi
@@ -13,6 +13,10 @@
                bootargs = "console=ttyS0,57600";
        };
 
+       aliases {
+               serial0 = &uartlite;
+       };
+
        cpuintc: cpuintc@0 {
                #address-cells = <0>;
                #interrupt-cells = <1>;
@@ -23,7 +27,7 @@
        palmbus@10000000 {
                compatible = "palmbus";
                reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
 
                #address-cells = <1>;
                #size-cells = <1>;
@@ -80,6 +84,9 @@
                        compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
                        reg = <0x600 0x100>;
 
+                       interrupt-parent = <&intc>;
+                       interrupts = <6>;
+
                        gpio0: bank@0 {
                                reg = <0>;
                                compatible = "mtk,mt7621-gpio-bank";
@@ -102,6 +109,39 @@
                        };
                };
 
+               i2c@900 {
+                       compatible = "mediatek,mt7628-i2c";
+                       reg = <0x900 0x100>;
+
+                       resets = <&rstctrl 16>;
+                       reset-names = "i2c";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+               };
+
+               i2s@a00 {
+                       compatible = "ralink,mt7620a-i2s";
+                       reg = <0xa00 0x100>;
+
+                       resets = <&rstctrl 17>;
+                       reset-names = "i2s";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <10>;
+
+                       dmas = <&gdma 2>,
+                               <&gdma 3>;
+                       dma-names = "tx", "rx";
+
+                       status = "disabled";
+               };
+
                spi@b00 {
                        compatible = "ralink,mt7621-spi";
                        reg = <0xb00 0x100>;
@@ -110,7 +150,7 @@
                        reset-names = "spi";
 
                        #address-cells = <1>;
-                       #size-cells = <1>;
+                       #size-cells = <0>;
 
                        pinctrl-names = "default";
                        pinctrl-0 = <&spi_pins>;
@@ -118,7 +158,7 @@
                        status = "disabled";
                };
 
-               uartlite@c00 {
+               uartlite: uartlite@c00 {
                        compatible = "ns16550a";
                        reg = <0xc00 0x100>;
 
@@ -156,7 +196,7 @@
                        status = "disabled";
                };
 
-               uart2@e00 {
+               uart2: uart2@e00 {
                        compatible = "ns16550a";
                        reg = <0xe00 0x100>;
 
@@ -175,44 +215,128 @@
 
                        status = "disabled";
                };
+
+               pwm@5000 {
+                       compatible = "mediatek,mt7628-pwm";
+                       reg = <0x5000 0x1000>;
+
+                       resets = <&rstctrl 31>;
+                       reset-names = "pwm";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
+
+                       status = "disabled";
+               };
+
+               pcm@2000 {
+                       compatible = "ralink,mt7620a-pcm";
+                       reg = <0x2000 0x800>;
+
+                       resets = <&rstctrl 11>;
+                       reset-names = "pcm";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <4>;
+
+                       status = "disabled";
+               };
+
+               gdma: gdma@2800 {
+                       compatible = "ralink,mt7620a-gdma", "ralink,rt2880-gdma";
+                       reg = <0x2800 0x800>;
+
+                       resets = <&rstctrl 14>;
+                       reset-names = "dma";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <7>;
+
+                       #dma-cells = <1>;
+                       #dma-channels = <16>;
+                       #dma-requests = <16>;
+
+                       status = "disabled";
+               };
        };
 
        pinctrl {
                compatible = "ralink,rt2880-pinmux";
                pinctrl-names = "default";
                pinctrl-0 = <&state_default>;
+
                state_default: pinctrl0 {
                };
+
                spi_pins: spi {
                        spi {
                                ralink,group = "spi";
                                ralink,function = "spi";
                        };
                };
+
+               spi_cs1_pins: spi_cs1 {
+                       spi_cs1 {
+                               ralink,group = "spi cs1";
+                               ralink,function = "spi cs1";
+                       };
+               };
+
+               i2c_pins: i2c {
+                       i2c {
+                               ralink,group = "i2c";
+                               ralink,function = "i2c";
+                       };
+               };
+
                uart0_pins: uartlite {
                        uartlite {
                                ralink,group = "uart0";
                                ralink,function = "uart0";
                        };
                };
+
                uart1_pins: uart1 {
                        uart1 {
                                ralink,group = "uart1";
                                ralink,function = "uart1";
                        };
                };
+
                uart2_pins: uart2 {
                        uart2 {
                                ralink,group = "uart2";
                                ralink,function = "uart2";
                        };
                };
+
                sdxc_pins: sdxc {
                        sdxc {
                                ralink,group = "sdmode";
                                ralink,function = "sdxc";
                        };
                };
+
+               pwm0_pins: pwm0 {
+                       pwm0 {
+                               ralink,group = "pwm0";
+                               ralink,function = "pwm0";
+                       };
+               };
+
+               pwm1_pins: pwm1 {
+                       pwm1 {
+                               ralink,group = "pwm1";
+                               ralink,function = "pwm1";
+                       };
+               };
+
+               pcm_i2s_pins: i2s {
+                       i2s {
+                               ralink,group = "i2s";
+                               ralink,function = "pcm";
+                       };
+               };
        };
 
        rstctrl: rstctrl {
@@ -220,17 +344,18 @@
                #reset-cells = <1>;
        };
 
-       usbphy: usbphy {
-               compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
+       usbphy: usbphy@10120000 {
+               compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy";
+               reg = <0x10120000 0x4000>;
                #phy-cells = <1>;
 
-               resets = <&rstctrl 22>;
-               reset-names = "host";
+               resets = <&rstctrl 22 &rstctrl 25>;
+               reset-names = "host", "device";
        };
 
        sdhci@10130000 {
                compatible = "ralink,mt7620-sdhci";
-               reg = <0x10130000 4000>;
+               reg = <0x10130000 0x4000>;
 
                interrupt-parent = <&intc>;
                interrupts = <14>;
@@ -242,7 +367,7 @@
        };
 
        ehci@101c0000 {
-               compatible = "ralink,rt3xxx-ehci";
+               compatible = "generic-ehci";
                reg = <0x101c0000 0x1000>;
 
                phys = <&usbphy 1>;
@@ -253,7 +378,7 @@
        };
 
        ohci@101c1000 {
-               compatible = "ralink,rt3xxx-ohci";
+               compatible = "generic-ohci";
                reg = <0x101c1000 0x1000>;
 
                phys = <&usbphy 1>;
@@ -265,18 +390,20 @@
 
        ethernet@10100000 {
                compatible = "ralink,rt5350-eth";
-               reg = <0x10100000 10000>;
+               reg = <0x10100000 0x10000>;
 
                interrupt-parent = <&cpuintc>;
                interrupts = <5>;
 
                resets = <&rstctrl 21 &rstctrl 23>;
                reset-names = "fe", "esw";
+
+               mediatek,switch = <&esw>;
        };
 
-       esw@10110000 {
+       esw: esw@10110000 {
                compatible = "ralink,rt3050-esw";
-               reg = <0x10110000 8000>;
+               reg = <0x10110000 0x8000>;
 
                resets = <&rstctrl 23>;
                reset-names = "esw";
@@ -319,4 +446,16 @@
                };
        };
 
+       wmac: wmac@10300000 {
+               compatible = "mediatek,mt7628-wmac";
+               reg = <0x10300000 0x100000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               status = "disabled";
+
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               mediatek,5ghz = <0>;
+       };
 };