ralink: add ethernet fe and esw reset control bit

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / rt2880.dtsi

diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi
index abf2271bc1e7215b4e4e932c23b21dd437411dd2..feabe425726cedc4d0cff6b74aa1afb058025e38 100644 (file)
--- a/target/linux/ramips/dts/rt2880.dtsi
+++ b/target/linux/ramips/dts/rt2880.dtsi
@@ -20,35 +20,37 @@
                compatible = "mti,cpu-interrupt-controller";
        };
 
-       palmbus@10000000 {
+       palmbus@300000 {
                compatible = "palmbus";
-               reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
+               reg = <0x300000 0x200000>;
+                ranges = <0x0 0x300000 0x1FFFFF>;
 
                #address-cells = <1>;
                #size-cells = <1>;
 
-               sysc@300000 {
+               sysc@0 {
                        compatible = "ralink,rt2880-sysc";
-                       reg = <0x300000 0x100>;
+                       reg = <0x000 0x100>;
                };
 
-               timer@300100 {
+               timer@100 {
                        compatible = "ralink,rt2880-timer";
-                       reg = <0x300100 0x20>;
+                       reg = <0x100 0x20>;
 
                        interrupt-parent = <&intc>;
                        interrupts = <1>;
+
+                       status = "disabled";
                };
 
-               watchdog@300120 {
+               watchdog@120 {
                        compatible = "ralink,rt2880-wdt";
-                       reg = <0x300120 0x10>;
+                       reg = <0x120 0x10>;
                };
 
-               intc: intc@300200 {
+               intc: intc@200 {
                        compatible = "ralink,rt2880-intc";
-                       reg = <0x300200 0x100>;
+                       reg = <0x200 0x100>;
 
                        interrupt-controller;
                        #interrupt-cells = <1>;
@@ -57,58 +59,137 @@
                        interrupts = <2>;
                };
 
-               memc@300300 {
+               memc@300 {
                        compatible = "ralink,rt2880-memc";
-                       reg = <0x300300 0x100>;
+                       reg = <0x300 0x100>;
                };
 
-               gpio0: gpio@300600 {
+               gpio0: gpio@600 {
                        compatible = "ralink,rt2880-gpio";
-                       reg = <0x300600 0x34>;
+                       reg = <0x600 0x34>;
 
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <0>;
                        ralink,num-gpios = <24>;
                        ralink,register-map = [ 00 04 08 0c
                                                20 24 28 2c
                                                30 34 ];
                };
 
-               gpio1: gpio@300638 {
+               gpio1: gpio@638 {
                        compatible = "ralink,rt2880-gpio";
-                       reg = <0x300638 0x24>;
+                       reg = <0x638 0x24>;
 
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <24>;
                        ralink,num-gpios = <16>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
+
+                       status = "disabled";
                };
 
-               gpio2: gpio@300660 {
+               gpio2: gpio@660 {
                        compatible = "ralink,rt2880-gpio";
-                       reg = <0x300660 0x24>;
+                       reg = <0x660 0x24>;
 
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <40>;
                        ralink,num-gpios = <32>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
                                                20 24 ];
+
+                       status = "disabled";
                };
 
-               uartlite@300c00 {
+               uartlite@c00 {
                        compatible = "ralink,rt2880-uart", "ns16550a";
-                       reg = <0x300c00 0x100>;
+                       reg = <0xc00 0x100>;
 
                        interrupt-parent = <&intc>;
-                       interrupts = <12>;
+                       interrupts = <8>;
 
                        reg-shift = <2>;
                };
        };
+
+       pinctrl {
+               compatible = "ralink,rt2880-pinmux";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&state_default>;
+
+               state_default: pinctrl0 {
+                       sdram {
+                               ralink,group = "sdram";
+                               ralink,function = "sdram";
+                       };
+               };
+
+               spi_pins: spi {
+                       spi {
+                               ralink,group = "spi";
+                               ralink,function = "spi";
+                       };
+               };
+
+               uartlite_pins: uartlite {
+                       uart {
+                               ralink,group = "uartlite";
+                               ralink,function = "uartlite";
+                       };
+               };
+       };
+
+       rstctrl: rstctrl {
+               compatible = "ralink,rt2880-reset";
+               #reset-cells = <1>;
+       };
+
+       ethernet@400000 {
+               compatible = "ralink,rt2880-eth";
+               reg = <0x00400000 10000>;
+
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               resets = <&rstctrl 18>;
+               reset-names = "fe";
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+
+               port@0 {
+                       compatible = "ralink,rt2880-port", "ralink,eth-port";
+                       reg = <0>;
+               };
+
+               mdio-bus {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+               };
+       };
+
+       wmac@480000 {
+               compatible = "ralink,rt2880-wmac";
+               reg = <0x480000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               ralink,eeprom = "soc_wmac.eeprom";
+       };
+
 };