Convert the NAND driver to platform_driver, allow tgz image to be built correctly

[openwrt/svn-archive/archive.git] / target / linux / rb532-2.6 / image / Makefile

diff --git a/target/linux/rb532-2.6/image/Makefile b/target/linux/rb532-2.6/image/Makefile
index 1f3a88ba4049a5240a99e7032a70d84b47c764ef..a9e2b9575c4de1de0816902cd0e74c2a208f5184 100644 (file)
--- a/target/linux/rb532-2.6/image/Makefile
+++ b/target/linux/rb532-2.6/image/Makefile
@@ -20,40 +20,45 @@ LOADER_MAKEOPTS= \
                RAMSIZE=$(RAMSIZE) \
                IMAGE_COPY=$(IMAGE_COPY)
 
-define Build/Compile
-       $(CC) -o $(STAGING_DIR)/bin/patch-cmdline $(PLATFORM_DIR)/src/patch-cmdline.c
-endef
-
 define Build/Clean
-       $(MAKE) -C ../../generic-2.6/image/lzma-loader $(LOADER_MAKEOPTS) clean
+       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
 endef
 
 define Image/Prepare
-       $(STAGING_DIR)/bin/patch-cmdline $(LINUX_DIR)/vmlinux 'root=/dev/cfa2 '
-       $(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL)
+       cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
 endef
 
 define Image/BuildKernel
-       cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-       $(MAKE) -C ../../generic-2.6/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
        $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
 endef
 
 define Image/cmdline/jffs2-64k
-block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2
+block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
 endef
 
 define Image/cmdline/jffs2-128k
-block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2
+block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
 endef
 
 define Image/cmdline/ext2
-root=/dev/cfa2 rootfstype=ext2
+root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit
+endef
+
+define Image/cmdline/squashfs
+block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit
+endef
+
+# TGZ images should be used with a yaffs2 rootfs
+define Image/cmdline/tgz
+root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
 endef
 
 define Image/Build
-       $(STAGING_DIR)/bin/patch-cmdline $(LINUX_DIR)/vmlinux '$(strip $(call Image/cmdline/$(1))) '
-       ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(LINUX_DIR)/vmlinux 16 $(KDIR)/root.$(1)
+       $(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
+ifneq ($(1),tgz)
+       ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+endif
 endef
 
 $(eval $(call BuildImage))