[tools] firmware_utils/mkmylofw: add support of named partitions
[openwrt/svn-archive/archive.git] / tools / firmware-utils / src / mkmylofw.c
index 6e3c1b30da900d44a6d4e6e7d4f6dad8faf3fbd0..585a9f9eba2ef04183b9b8772de68833e63ead2f 100644 (file)
@@ -1,7 +1,5 @@
 /*
- *  $Id$
- *
- *  Copyright (C) 2006,2007 Gabor Juhos <juhosg@freemail.hu>
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -50,6 +48,7 @@
 #define MAX_ARG_COUNT   32
 #define MAX_ARG_LEN     1024
 #define FILE_BUF_LEN    (16*1024)
+#define PART_NAME_LEN  32
 
 struct fw_block {
        uint32_t        addr;
@@ -61,6 +60,11 @@ struct fw_block {
        uint32_t        crc;    /* crc value of the file */
 };
 
+struct fw_part {
+       struct mylo_partition   mylo;
+       char                    name[PART_NAME_LEN];
+};
+
 #define BLOCK_FLAG_HAVEHDR    0x0001
 
 struct cpx_board {
@@ -72,15 +76,27 @@ struct cpx_board {
        uint16_t        svid;   /* sub vendor id */
        uint16_t        sdid;   /* sub device id */
        uint32_t        flash_size;     /* size of flash */
+       uint32_t        part_offset;    /* offset of the partition_table */
+       uint32_t        part_size;      /* size of the partition_table */
 };
 
-#define BOARD(_vid, _did, _svid, _sdid, _flash, _mod, _name, _desc) {          \
-       .model = _mod, .name = _name, .desc = _desc,                            \
+#define BOARD(_vid, _did, _svid, _sdid, _flash, _mod, _name, _desc, _po, _ps) {                \
+       .model = _mod, .name = _name, .desc = _desc,                    \
        .vid = _vid, .did = _did, .svid = _svid, .sdid = _sdid,         \
-       .flash_size = (_flash << 20)    }
+       .flash_size = (_flash << 20),                                   \
+       .part_offset = _po, .part_size = _ps }
+
+#define CPX_BOARD(_did, _flash, _mod, _name, _desc, _po, _ps) \
+       BOARD(VENID_COMPEX, _did, VENID_COMPEX, _did, _flash, _mod, _name, _desc, _po, _ps)
 
-#define CPX_BOARD(_did, _flash, _mod, _name, _desc) \
-       BOARD(VENID_COMPEX, _did, VENID_COMPEX, _did, _flash, _mod, _name, _desc)
+#define CPX_BOARD_ADM(_did, _flash, _mod, _name, _desc) \
+       CPX_BOARD(_did, _flash, _mod, _name, _desc, 0x10000, 0x10000)
+
+#define CPX_BOARD_AR71XX(_did, _flash, _mod, _name, _desc) \
+       CPX_BOARD(_did, _flash, _mod, _name, _desc, 0x20000, 0x8000)
+
+#define CPX_BOARD_AR23XX(_did, _flash, _mod, _name, _desc) \
+       CPX_BOARD(_did, _flash, _mod, _name, _desc, 0x10000, 0x10000)
 
 #define ALIGN(x,y)     ((x)+((y)-1)) & ~((y)-1)
 
@@ -93,46 +109,58 @@ int        fw_num_blocks = 0;
 int    verblevel = 0;
 
 struct mylo_fw_header fw_header;
-struct mylo_partition fw_partitions[MYLO_MAX_PARTITIONS];
+struct fw_part fw_parts[MYLO_MAX_PARTITIONS];
 struct fw_block fw_blocks[MAX_FW_BLOCKS];
+struct cpx_board *board;
 
 struct cpx_board boards[] = {
-       CPX_BOARD(DEVID_COMPEX_NP18A, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP18A, 4,
                "NP18A", "Compex NetPassage 18A",
                "Dualband Wireless A+G Internet Gateway"),
-       CPX_BOARD(DEVID_COMPEX_NP26G8M, 2,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP26G8M, 2,
                "NP26G8M", "Compex NetPassage 26G (8M)",
                "Wireless-G Broadband Multimedia Gateway"),
-       CPX_BOARD(DEVID_COMPEX_NP26G16M, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP26G16M, 4,
                "NP26G16M", "Compex NetPassage 26G (16M)",
                "Wireless-G Broadband Multimedia Gateway"),
-       CPX_BOARD(DEVID_COMPEX_NP27G, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP27G, 4,
                "NP27G", "Compex NetPassage 27G",
                "Wireless-G 54Mbps eXtended Range Router"),
-       CPX_BOARD(DEVID_COMPEX_NP28G, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP28G, 4,
                "NP28G", "Compex NetPassage 28G",
                "Wireless 108Mbps Super-G XR Multimedia Router with 4 USB Ports"),
-       CPX_BOARD(DEVID_COMPEX_NP28GHS, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_NP28GHS, 4,
                "NP28GHS", "Compex NetPassage 28G (HotSpot)",
                "HotSpot Solution"),
-       CPX_BOARD(DEVID_COMPEX_WP18, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_WP18, 4,
                "WP18", "Compex NetPassage WP18",
                "Wireless-G 54Mbps A+G Dualband Access Point"),
-       CPX_BOARD(DEVID_COMPEX_WP54G, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_WP54G, 4,
                "WP54G", "Compex WP54G",
                "Wireless-G 54Mbps XR Access Point"),
-       CPX_BOARD(DEVID_COMPEX_WP54Gv1C, 2,
+       CPX_BOARD_ADM(DEVID_COMPEX_WP54Gv1C, 2,
                "WP54Gv1C", "Compex WP54G rev.1C",
                "Wireless-G 54Mbps XR Access Point"),
-       CPX_BOARD(DEVID_COMPEX_WP54AG, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_WP54AG, 4,
                "WP54AG", "Compex WP54AG",
                "Wireless-AG 54Mbps XR Access Point"),
-       CPX_BOARD(DEVID_COMPEX_WPP54G, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_WPP54G, 4,
                "WPP54G", "Compex WPP54G",
                "Outdoor Access Point"),
-       CPX_BOARD(DEVID_COMPEX_WPP54AG, 4,
+       CPX_BOARD_ADM(DEVID_COMPEX_WPP54AG, 4,
                "WPP54AG", "Compex WPP54AG",
                "Outdoor Access Point"),
+
+       CPX_BOARD_AR71XX(DEVID_COMPEX_WP543, 2,
+               "WP543", "Compex WP543",
+               "BareBoard"),
+
+       CPX_BOARD_AR23XX(DEVID_COMPEX_NP25G, 4,
+               "NP25G", "Compex NetPassage 25G",
+               "Wireless 54Mbps XR Router"),
+       CPX_BOARD_AR23XX(DEVID_COMPEX_WPE53G, 4,
+               "WPE53G", "Compex NetPassage 25G",
+               "Wireless 54Mbps XR Access Point"),
        {.model = NULL}
 };
 
@@ -204,15 +232,17 @@ usage(int status)
 "                  define block at <addr> with length of <len>.\n"
 "                  valid <flag> values:\n"
 "                      h : add crc header before the file data.\n"
-"  -p <addr>:<len>[:<flags>[:<param>[:<file>]]]\n"
+"  -p <addr>:<len>[:<flags>[:<param>[:<name>[:<file>]]]]\n"
 "                  add partition at <addr>, with size of <len> to the\n"
-"                  partition table, set partition flags to <flags> and\n"
-"                  partition parameter to <param>. If the <file> is specified\n"
-"                  content of the file is also added to the firmware image.\n"
+"                  partition table, set partition name to <name>, partition \n"
+"                  flags to <flags> and partition parameter to <param>.\n"
+"                  If the <file> is specified content of the file will be \n"
+"                  added to the firmware image.\n"
 "                  valid <flag> values:\n"
 "                      a:  this is the active partition. The bootloader loads\n"
 "                          the firmware from this partition.\n"
 "                      h:  the partition data have a header.\n"
+"                      l:  the partition data uses LZMA compression.\n"
 "                      p:  the bootloader loads data from this partition to\n"
 "                          the RAM before decompress it.\n"
 "  -h              show this screen\n"
@@ -325,7 +355,7 @@ find_board(char *model){
 
        board = NULL;
        for (tmp = boards; tmp->model != NULL; tmp++){
-               if (strcmp(model, tmp->model) == 0) {
+               if (strcasecmp(model, tmp->model) == 0) {
                        board = tmp;
                        break;
                }
@@ -424,7 +454,7 @@ process_partitions(void)
        int i;
 
        for (i = 0; i < fw_num_partitions; i++) {
-               part = &fw_partitions[i];
+               part = &fw_parts[i].mylo;
 
                if (part->addr > flash_size) {
                        errmsg(0, "invalid partition at 0x%08X", part->addr);
@@ -588,26 +618,39 @@ int
 write_out_partitions(FILE *outfile, uint32_t *crc)
 {
        struct mylo_partition_table p;
-       struct mylo_partition *p1, *p2;
+       char part_names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
+       int ret;
        int i;
 
        if (fw_num_partitions == 0)
                return 0;
 
        memset(&p, 0, sizeof(p));
+       memset(part_names, 0, sizeof(part_names));
 
        p.magic = HOST_TO_LE32(MYLO_MAGIC_PARTITIONS);
        for (i = 0; i < fw_num_partitions; i++) {
-               p1 = &p.partitions[i];
-               p2 = &fw_partitions[i];
-               p1->flags = HOST_TO_LE16(p2->flags);
-               p1->type = HOST_TO_LE16(PARTITION_TYPE_USED);
-               p1->addr = HOST_TO_LE32(p2->addr);
-               p1->size = HOST_TO_LE32(p2->size);
-               p1->param = HOST_TO_LE32(p2->param);
+               struct mylo_partition *mp;
+               struct fw_part *fp;
+
+               mp = &p.partitions[i];
+               fp = &fw_parts[i];
+               mp->flags = HOST_TO_LE16(fp->mylo.flags);
+               mp->type = HOST_TO_LE16(PARTITION_TYPE_USED);
+               mp->addr = HOST_TO_LE32(fp->mylo.addr);
+               mp->size = HOST_TO_LE32(fp->mylo.size);
+               mp->param = HOST_TO_LE32(fp->mylo.param);
+
+               memcpy(part_names[i], fp->name, PART_NAME_LEN);
        }
 
-       return write_out_data(outfile, (uint8_t *)&p, sizeof(p), crc);
+       ret = write_out_data(outfile, (uint8_t *)&p, sizeof(p), crc);
+       if (ret)
+               return ret;
+
+       ret = write_out_data(outfile, (uint8_t *)part_names, sizeof(part_names),
+                               crc);
+       return ret;
 }
 
 
@@ -624,11 +667,11 @@ write_out_blocks(FILE *outfile, uint32_t *crc)
         * for the partition table
         */
        if (fw_num_partitions > 0) {
-
                desc.type = HOST_TO_LE32(FW_DESC_TYPE_USED);
-               desc.addr = HOST_TO_LE32(0x10000);
-               desc.dlen = HOST_TO_LE32(sizeof(struct mylo_partition_table));
-               desc.blen = HOST_TO_LE32(0x10000);
+               desc.addr = HOST_TO_LE32(board->part_offset);
+               desc.dlen = HOST_TO_LE32(sizeof(struct mylo_partition_table) +
+                                       (MYLO_MAX_PARTITIONS * PART_NAME_LEN));
+               desc.blen = HOST_TO_LE32(board->part_size);
 
                if (write_out_desc(outfile, &desc, crc) != 0)
                        return -1;
@@ -967,8 +1010,8 @@ parse_opt_partition(char ch, char *arg)
        char *argv[MAX_ARG_COUNT];
        int argc;
        char *p;
-
        struct mylo_partition *part;
+       struct fw_part *fp;
 
        if (required_arg(ch, arg)) {
                goto err_out;
@@ -979,7 +1022,8 @@ parse_opt_partition(char ch, char *arg)
                goto err_out;
        }
 
-       part = &fw_partitions[fw_num_partitions++];
+       fp = &fw_parts[fw_num_partitions++];
+       part = &fp->mylo;
 
        argc = parse_arg(arg, buf, argv);
 
@@ -1014,6 +1058,9 @@ parse_opt_partition(char ch, char *arg)
                        case 'p':
                                part->flags |= PARTITION_FLAG_PRELOAD;
                                break;
+                       case 'l':
+                               part->flags |= PARTITION_FLAG_LZMA;
+                               break;
                        case 'h':
                                part->flags |= PARTITION_FLAG_HAVEHDR;
                                break;
@@ -1034,13 +1081,21 @@ parse_opt_partition(char ch, char *arg)
                goto err_out;
        }
 
+       p = argv[4];
+       if (is_empty_arg(p)) {
+               /* set default partition parameter */
+               fp->name[0] = '\0';
+       } else {
+               strncpy(fp->name, p, PART_NAME_LEN);
+       }
+
 #if 1
        if (part->size == 0) {
                part->size = flash_size - part->addr;
        }
 
        /* processing file parameter */
-       p = argv[4];
+       p = argv[5];
        if (is_empty_arg(p) == 0) {
                struct fw_block *b;
 
@@ -1068,8 +1123,6 @@ err_out:
 int
 parse_opt_board(char ch, char *arg)
 {
-       struct cpx_board *board;
-
        if (required_arg(ch, arg)) {
                goto err_out;
        }
@@ -1189,6 +1242,11 @@ main(int argc, char *argv[])
                goto out;
        }
 
+       if (!board) {
+               errmsg(0, "no board specified");
+               goto out;
+       }
+
        if (flash_size == 0) {
                errmsg(0, "no flash size specified");
                goto out;