[firmware-utils] mkzynfw: add definitions for the P-2602HW-D1A
[openwrt/svn-archive/archive.git] / tools / firmware-utils / src / mkzynfw.c
index f8c7159..9009d50 100644 (file)
@@ -1,8 +1,8 @@
 /*
  *  $Id$
  *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007-2008 OpenWrt.org
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
  *
  *  This code was based on the information of the ZyXEL's firmware
  *  image format written by Kolja Waschk, can be found at:
@@ -95,7 +95,7 @@ struct board_info {
        uint32_t flash_base;    /* flash base address */
        uint32_t flash_size;    /* board flash size */
        uint32_t code_start;    /* code start address */
-       uint32_t fw_offs;       /* offset of the firmware within the flash */
+       uint32_t romio_offs;    /* offset of the firmware within the flash */
 };
 
 /*
@@ -125,7 +125,7 @@ int num_blocks = 0;
        .name = (n), .desc=(d), \
        .vendor = (v), .model = (m), \
        .flash_base = (fb), .flash_size = (fs)<<20, \
-       .code_start = (cs), .fw_offs = (fo) \
+       .code_start = (cs), .romio_offs = (fo) \
        }
 
 #define ADMBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
@@ -164,6 +164,17 @@ static struct board_info boards[] = {
        ADMBOARD1("P-335U",     "ZyXEL Prestige 335U", ZYNOS_MODEL_P_335U, 4),
        ADMBOARD1("P-335WT",    "ZyXEL Prestige 335WT", ZYNOS_MODEL_P_335WT, 4),
 
+       {
+               .name           = "P-2602HW-D1A",
+               .desc           = "ZyXEL P-2602HW-D1A",
+               .vendor         = ZYNOS_VENDOR_ID_ZYXEL,
+               .model          = ZYNOS_MODEL_P_2602HW_D1A,
+               .flash_base     = AR7_FLASH_BASE,
+               .flash_size     = 4*1024*1024,
+               .code_start     = 0x94008000,
+               .romio_offs     = 0x20000,
+       },
+
 #if 0
        /*
         * Texas Instruments AR7 based boards
@@ -193,7 +204,7 @@ static struct board_info boards[] = {
                .flash_base     = AR7_FLASH_BASE,
                .flash_size     = 8*1024*1024,
                .code_start     = 0x94014000,
-               .fw_offs        = 0x40000,
+               .romio_offs     = 0x40000,
        },
 
        /*
@@ -710,7 +721,7 @@ write_out_image(FILE *outfile)
 
        offset += padlen;
 
-       mmap.addr = board->flash_base + board->fw_offs + offset;
+       mmap.addr = board->flash_base + board->romio_offs + offset;
        hdr.mmap_addr = mmap.addr;
        res = write_out_mmap(outfile, &mmap, &css);
        if (res)
@@ -887,7 +898,7 @@ calc_block_offsets(int type, uint32_t *offset)
                        continue;
 
                next_offs = ALIGN(*offset, block->align);
-               avail = board->flash_size - board->fw_offs - next_offs;
+               avail = board->flash_size - board->romio_offs - next_offs;
                if (next_offs + block->file_size > avail) {
                        ERR("file %s is too big, offset = %u, size=%u,"
                                " align = %u", block->file_name,
@@ -921,7 +932,7 @@ process_blocks(void)
                        return res;
        }
 
-       offset = board->fw_offs + bootext_block->file_size;
+       offset = board->romio_offs + bootext_block->file_size;
        res = calc_block_offsets(BLOCK_TYPE_RAW, &offset);
 
        return res;