X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=Config.in;h=97aef0f3442436f5ea3029831c736b9a389daa48;hp=180d7acc86ff60c2f1a5deda12f3d4eaf41c6321;hb=aeea56c955f0dc35c9a11df641e19bf002228c4d;hpb=76df56b0ed385c7cb0cc26c52beac6c4db61af8c diff --git a/Config.in b/Config.in index 180d7acc86..97aef0f344 100644 --- a/Config.in +++ b/Config.in @@ -1,4 +1,4 @@ -# Copyright (C) 2006-2009 OpenWrt.org +# Copyright (C) 2006-2012 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -6,6 +6,10 @@ mainmenu "OpenWrt Configuration" +config MODULES + bool + default y + config HAVE_DOT_CONFIG bool default y @@ -13,224 +17,740 @@ config HAVE_DOT_CONFIG source "target/Config.in" menu "Target Images" - config TARGET_ROOTFS_INITRAMFS + + menuconfig TARGET_ROOTFS_INITRAMFS bool "ramdisk" default y if USES_INITRAMFS - depends LINUX_2_6 help Embed the rootfs into the kernel (initramfs) - choice - prompt "ramdisk compression" - depends TARGET_ROOTFS_INITRAMFS - depends !LINUX_2_6_21 - depends !LINUX_2_6_25 - depends !LINUX_2_6_27 - depends !LINUX_2_6_28 - default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx - default TARGET_INITRAMFS_COMPRESSION_NONE - help - Select ramdisk compression. + choice + prompt "Compression" + default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx + default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips + default TARGET_INITRAMFS_COMPRESSION_NONE + depends on TARGET_ROOTFS_INITRAMFS + help + Select ramdisk compression. - config TARGET_INITRAMFS_COMPRESSION_NONE - bool "NONE" + config TARGET_INITRAMFS_COMPRESSION_NONE + bool "none" - config TARGET_INITRAMFS_COMPRESSION_GZIP - bool "GZIP" + config TARGET_INITRAMFS_COMPRESSION_GZIP + bool "gzip" - config TARGET_INITRAMFS_COMPRESSION_BZIP2 - bool "BZIP2" + config TARGET_INITRAMFS_COMPRESSION_BZIP2 + bool "bzip2" - config TARGET_INITRAMFS_COMPRESSION_LZMA - bool "LZMA" + config TARGET_INITRAMFS_COMPRESSION_LZMA + bool "lzma" - config TARGET_INITRAMFS_COMPRESSION_LZO - bool "LZO" - endchoice + config TARGET_INITRAMFS_COMPRESSION_LZO + bool "lzo" + + config TARGET_INITRAMFS_COMPRESSION_XZ + bool "xz" + endchoice + + config EXTERNAL_CPIO + string + prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS + default "" + help + Kernel uses specified external cpio as INITRAMFS_SOURCE + + comment "Root filesystem archives" + + config TARGET_ROOTFS_CPIOGZ + bool "cpio.gz" + default y if USES_CPIOGZ + help + Build a compressed cpio archive of the the root filesystem + + config TARGET_ROOTFS_TARGZ + bool "tar.gz" + default y if USES_TARGZ + help + Build a compressed tar archive of the the root filesystem + + comment "Root filesystem images" + + config TARGET_ROOTFS_EXT4FS + bool "ext4" + default y if USES_EXT4 + help + Ext4 file system with some free space for uml images + + config TARGET_ROOTFS_ISO + bool "iso" + default n + depends on TARGET_x86_generic + help + Create some bootable ISO image config TARGET_ROOTFS_JFFS2 bool "jffs2" default y if USES_JFFS2 - depends !TARGET_ROOTFS_INITRAMFS help Build a jffs2 root filesystem + config TARGET_ROOTFS_JFFS2_NAND + bool "jffs2 for NAND" + default y if USES_JFFS2_NAND + depends on USES_JFFS2_NAND + help + Build a jffs2 root filesystem for NAND flash + config TARGET_ROOTFS_SQUASHFS bool "squashfs" default y if USES_SQUASHFS - depends !TARGET_ROOTFS_INITRAMFS help Build a squashfs-lzma root filesystem - config TARGET_ROOTFS_TGZ - bool "tgz" - default y if USES_TGZ - depends !TARGET_ROOTFS_INITRAMFS + config TARGET_ROOTFS_UBIFS + bool "ubifs" + default y if USES_UBIFS + depends on USES_UBIFS help - Build a compressed tar archive of the the root filesystem + Build a ubifs root filesystem - config TARGET_ROOTFS_CPIOGZ - bool "cpiogz" - default y if USES_CPIOGZ - depends !TARGET_ROOTFS_INITRAMFS + comment "Image Options" + + source "target/linux/*/image/Config.in" + + config TARGET_ROOTFS_PARTSIZE + int "Root filesystem partition size (in MB)" + depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532 + default 48 help - Build a compressed cpio archive of the the root filesystem + Allows you to change the root filesystem partition size - config TARGET_ROOTFS_EXT2FS - bool "ext2" - default y if USES_EXT2 - depends !TARGET_ROOTFS_INITRAMFS + config TARGET_ROOTFS_MAXINODE + int "Maximum number of inodes in root filesystem" + depends on TARGET_ROOTFS_EXT4FS + default 6000 help - Ext2 file system with some free space for uml images + Allows you to change the maximum number of inodes in the root filesystem - config TARGET_ROOTFS_ISO - bool "iso" + config TARGET_ROOTFS_RESERVED_PCT + int "Percentage of reserved blocks in root filesystem" + depends on TARGET_ROOTFS_EXT4FS + default 0 + help + Allows you to change the percentage of reserved blocks in the root filesystem + +endmenu + +menu "Global build settings" + + config ALL + bool "Select all packages by default" + default n + + comment "General build options" + + config DISPLAY_SUPPORT + bool "Show packages that require graphics support (local or remote)" default n - depends TARGET_ROOTFS_INITRAMFS && TARGET_x86 + + config BUILD_PATENTED + default y + bool "Compile with support for patented functionality" help - Create some bootable ISO image + When this option is disabled, software which provides patented functionality will not be built. + In case software provides optional support for patented functionality, + this optional support will get disabled for this package. -comment "Image Options" + config BUILD_NLS + default n + bool "Compile with full language support" + help + When this option is enabled, packages are built with the full versions of iconv and GNU gettext + instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support. -source "target/linux/*/image/Config.in" + config BUILD_STATIC_TOOLS + default n + bool "Attempt to link host utilities statically" + help + Linking host utilities like sed or firmware-utils statically increases the portability of the + generated ImageBuilder and SDK tarballs, however it may fail on some Linux distributions. - config TARGET_ROOTFS_FSPART - int "Filesystem part size (in MB)" - depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532 || TARGET_olpc - default 48 - help - Allows you to change the filesystem partition size + config SHADOW_PASSWORDS + bool + prompt "Enable shadow password support" + default y + help + Enable shadow password support. - config TARGET_ROOTFS_MAXINODE - int "Maximum number of inodes in filesystem" - depends TARGET_ROOTFS_EXT2FS - default 6000 - help - Allows you to change the maximum number of inodes in the filesystem + config CLEAN_IPKG + bool + prompt "Remove ipkg/opkg status data files in final images" + default n + help + This removes all ipkg/opkg status data files from the target directory before building the root fs -endmenu + config COLLECT_KERNEL_DEBUG + bool + prompt "Collect kernel debug information" + select KERNEL_DEBUG_INFO + default n + help + This collects debugging symbols from the kernel and all compiled modules. + Useful for release builds, so that kernel issues can be debugged offline later. -menu "Global build settings" + comment "Kernel build options" -config ALL - bool "Select all packages by default" - default n + config KERNEL_DEBUG_FS + bool "Compile the kernel with Debug FileSystem enabled" + default y + help + debugfs is a virtual file system that kernel developers use to put + debugging files into. Enable this option to be able to read and + write to these files. -comment "General build options" + config KERNEL_PERF_EVENTS + bool + default n -config CLEAN_IPKG - bool - prompt "Disable ipkg/opkg installation on the target" - default n - help - This removes all ipkg data from the target directory before building the root fs + config KERNEL_PROFILING + bool "Compile the kernel with profiling enabled" + default n + select KERNEL_PERF_EVENTS + help + Enable the extended profiling support mechanisms used by profilers such + as OProfile. -config LARGEFILE - bool - prompt "Enable large file (files > 2 GB) support" - default y - help - Enable large file (files > 2 GB) support. + config KERNEL_KALLSYMS + bool "Compile the kernel with symbol table information" + default y + help + This will give you more information in stack traces from kernel oopses -config SHADOW_PASSWORDS - bool - prompt "Enable shadow password support" - default y - help - Enable shadow password support. + config KERNEL_FTRACE + bool "Compile the kernel with tracing support" + default n -choice - prompt "Binary stripping method" - default USE_STRIP if EXTERNAL_TOOLCHAIN - default USE_STRIP if USE_GLIBC || USE_EGLIBC - default USE_SSTRIP - help - Select the binary stripping method you wish to use. + config KERNEL_FTRACE_SYSCALLS + bool "Trace system calls" + depends on KERNEL_FTRACE + default n - config NO_STRIP - bool "none" + config KERNEL_ENABLE_DEFAULT_TRACERS + bool "Trace process context switches and events" + depends on KERNEL_FTRACE + default n + + config KERNEL_DEBUG_KERNEL + bool + default n + + config KERNEL_DEBUG_INFO + bool "Compile the kernel with debug information" + default y + select KERNEL_DEBUG_KERNEL help - This will install unstripped binaries (useful for native compiling/debugging) + This will compile your kernel and modules with debug information. - config USE_STRIP - bool "strip" - depends !DEBUG + config KERNEL_DEBUG_LL_UART_NONE + bool + default n + depends on arm + + config KERNEL_DEBUG_LL + bool + default n + depends on arm + select KERNEL_DEBUG_LL_UART_NONE + help + ARM low level debugging + + config KERNEL_EARLY_PRINTK + bool "Compile the kernel with early printk" + default n + depends on arm + select KERNEL_DEBUG_KERNEL + select KERNEL_DEBUG_LL if arm help - This will install binaries stripped using strip from binutils + Compile the kernel with early printk support. + This is only useful for debugging purposes to send messages + over the serial console in early boot. + Enable this to debug early boot problems. + + config KERNEL_AIO + bool "Compile the kernel with asynchronous IO support" + default n + + config KERNEL_DIRECT_IO + bool "Compile the kernel with direct IO support" + default n + + config KERNEL_MAGIC_SYSRQ + bool "Compile the kernel with SysRq support" + default y + config KERNEL_COREDUMP + bool - config USE_SSTRIP - bool "sstrip" - depends !DEBUG - depends !USE_GLIBC - depends !USE_EGLIBC + config KERNEL_ELF_CORE + bool "Enable process core dump support" + select KERNEL_COREDUMP + default y + + config KERNEL_PROVE_LOCKING + bool "Enable kernel lock checking" + select KERNEL_DEBUG_KERNEL + default n + + config KERNEL_PRINTK_TIME + bool "Enable printk timestamps" + default y + + config KERNEL_RELAY + bool + + config KERNEL_KEXEC + bool "Enable kexec support" + + # + # CGROUP support symbols + # + + config KERNEL_CGROUPS + bool "Enable kernel cgroups" + default n + + if KERNEL_CGROUPS + + config KERNEL_CGROUP_DEBUG + bool "Example debug cgroup subsystem" + default n + help + This option enables a simple cgroup subsystem that + exports useful debugging information about the cgroups + framework. + + config KERNEL_FREEZER + bool + default y if KERNEL_CGROUP_FREEZER + + config KERNEL_CGROUP_FREEZER + bool "Freezer cgroup subsystem" + default n + help + Provides a way to freeze and unfreeze all tasks in a + cgroup. + + config KERNEL_CGROUP_DEVICE + bool "Device controller for cgroups" + default y + help + Provides a cgroup implementing whitelists for devices which + a process in the cgroup can mknod or open. + + config KERNEL_CPUSETS + bool "Cpuset support" + default n + help + This option will let you create and manage CPUSETs which + allow dynamically partitioning a system into sets of CPUs and + Memory Nodes and assigning tasks to run only within those sets. + This is primarily useful on large SMP or NUMA systems. + + config KERNEL_PROC_PID_CPUSET + bool "Include legacy /proc//cpuset file" + default n + depends on KERNEL_CPUSETS + + config KERNEL_CGROUP_CPUACCT + bool "Simple CPU accounting cgroup subsystem" + default n + help + Provides a simple Resource Controller for monitoring the + total CPU consumed by the tasks in a cgroup. + + config KERNEL_RESOURCE_COUNTERS + bool "Resource counters" + default n + help + This option enables controller independent resource accounting + infrastructure that works with cgroups. + + config KERNEL_MM_OWNER + bool + default y if KERNEL_MEMCG + + config KERNEL_MEMCG + bool "Memory Resource Controller for Control Groups" + default n + depends on KERNEL_RESOURCE_COUNTERS + help + Provides a memory resource controller that manages both anonymous + memory and page cache. (See Documentation/cgroups/memory.txt) + + Note that setting this option increases fixed memory overhead + associated with each page of memory in the system. By this, + 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory + usage tracking struct at boot. Total amount of this is printed out + at boot. + + Only enable when you're ok with these trade offs and really + sure you need the memory resource controller. Even when you enable + this, you can set "cgroup_disable=memory" at your boot option to + disable memory resource controller and you can avoid overheads. + (and lose benefits of memory resource controller) + + This config option also selects MM_OWNER config option, which + could in turn add some fork/exit overhead. + + config KERNEL_MEMCG_SWAP + bool "Memory Resource Controller Swap Extension" + default n + depends on KERNEL_MEMCG + help + Add swap management feature to memory resource controller. When you + enable this, you can limit mem+swap usage per cgroup. In other words, + when you disable this, memory resource controller has no cares to + usage of swap...a process can exhaust all of the swap. This extension + is useful when you want to avoid exhaustion swap but this itself + adds more overheads and consumes memory for remembering information. + Especially if you use 32bit system or small memory system, please + be careful about enabling this. When memory resource controller + is disabled by boot option, this will be automatically disabled and + there will be no overhead from this. Even when you set this config=y, + if boot option "swapaccount=0" is set, swap will not be accounted. + Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page + size is 4096bytes, 512k per 1Gbytes of swap. + + config KERNEL_MEMCG_SWAP_ENABLED + bool "Memory Resource Controller Swap Extension enabled by default" + default n + depends on KERNEL_MEMCG_SWAP + help + Memory Resource Controller Swap Extension comes with its price in + a bigger memory consumption. General purpose distribution kernels + which want to enable the feature but keep it disabled by default + and let the user enable it by swapaccount boot command line + parameter should have this option unselected. + For those who want to have the feature enabled by default should + select this option (if, for some reason, they need to disable it + then swapaccount=0 does the trick). + + + config KERNEL_MEMCG_KMEM + bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)" + default n + depends on KERNEL_MEMCG + help + The Kernel Memory extension for Memory Resource Controller can limit + the amount of memory used by kernel objects in the system. Those are + fundamentally different from the entities handled by the standard + Memory Controller, which are page-based, and can be swapped. Users of + the kmem extension can use it to guarantee that no group of processes + will ever exhaust kernel resources alone. + + config KERNEL_CGROUP_PERF + bool "Enable perf_event per-cpu per-container group (cgroup) monitoring" + default n + select KERNEL_PERF_EVENTS + help + This option extends the per-cpu mode to restrict monitoring to + threads which belong to the cgroup specified and run on the + designated cpu. + + menuconfig KERNEL_CGROUP_SCHED + bool "Group CPU scheduler" + default n + help + This feature lets CPU scheduler recognize task groups and control CPU + bandwidth allocation to such task groups. It uses cgroups to group + tasks. + + if KERNEL_CGROUP_SCHED + + config KERNEL_FAIR_GROUP_SCHED + bool "Group scheduling for SCHED_OTHER" + default n + + config KERNEL_CFS_BANDWIDTH + bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED" + default n + depends on KERNEL_FAIR_GROUP_SCHED + help + This option allows users to define CPU bandwidth rates (limits) for + tasks running within the fair group scheduler. Groups with no limit + set are considered to be unconstrained and will run with no + restriction. + See tip/Documentation/scheduler/sched-bwc.txt for more information. + + config KERNEL_RT_GROUP_SCHED + bool "Group scheduling for SCHED_RR/FIFO" + default n + help + This feature lets you explicitly allocate real CPU bandwidth + to task groups. If enabled, it will also make it impossible to + schedule realtime tasks for non-root users until you allocate + realtime bandwidth for them. + + endif + + config KERNEL_BLK_CGROUP + bool "Block IO controller" + default y + help + Generic block IO controller cgroup interface. This is the common + cgroup interface which should be used by various IO controlling + policies. + + Currently, CFQ IO scheduler uses it to recognize task groups and + control disk bandwidth allocation (proportional time slice allocation) + to such task groups. It is also used by bio throttling logic in + block layer to implement upper limit in IO rates on a device. + + This option only enables generic Block IO controller infrastructure. + One needs to also enable actual IO controlling logic/policy. For + enabling proportional weight division of disk bandwidth in CFQ, set + CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set + CONFIG_BLK_DEV_THROTTLING=y. + + config KERNEL_DEBUG_BLK_CGROUP + bool "Enable Block IO controller debugging" + default n + depends on KERNEL_BLK_CGROUP + help + Enable some debugging help. Currently it exports additional stat + files in a cgroup which can be useful for debugging. + + config KERNEL_NET_CLS_CGROUP + bool "Control Group Classifier" + default y + + config KERNEL_NETPRIO_CGROUP + bool "Network priority cgroup" + default y + + endif + + # + # Namespace support symbols + # + + config KERNEL_NAMESPACES + bool "Enable kernel namespaces" + default n + + if KERNEL_NAMESPACES + + config KERNEL_UTS_NS + bool "UTS namespace" + default y + help + In this namespace tasks see different info provided + with the uname() system call + + config KERNEL_IPC_NS + bool "IPC namespace" + default y + help + In this namespace tasks work with IPC ids which correspond to + different IPC objects in different namespaces. + + config KERNEL_USER_NS + bool "User namespace (EXPERIMENTAL)" + default y + help + This allows containers, i.e. vservers, to use user namespaces + to provide different user info for different servers. + + config KERNEL_PID_NS + bool "PID Namespaces" + default y + help + Support process id namespaces. This allows having multiple + processes with the same pid as long as they are in different + pid namespaces. This is a building block of containers. + + config KERNEL_NET_NS + bool "Network namespace" + default y + help + Allow user space to create what appear to be multiple instances + of the network stack. + + endif + + # + # LXC related symbols + # + + config KERNEL_LXC_MISC + bool "Enable miscellaneous LXC related options" + default n + + if KERNEL_LXC_MISC + + config KERNEL_DEVPTS_MULTIPLE_INSTANCES + bool "Support multiple instances of devpts" + default y + help + Enable support for multiple instances of devpts filesystem. + If you want to have isolated PTY namespaces (eg: in containers), + say Y here. Otherwise, say N. If enabled, each mount of devpts + filesystem with the '-o newinstance' option will create an + independent PTY namespace. + + config KERNEL_POSIX_MQUEUE + bool "POSIX Message Queues" + default n + help + POSIX variant of message queues is a part of IPC. In POSIX message + queues every message has a priority which decides about succession + of receiving it by a process. If you want to compile and run + programs written e.g. for Solaris with use of its POSIX message + queues (functions mq_*) say Y here. + + POSIX message queues are visible as a filesystem called 'mqueue' + and can be mounted somewhere if you want to do filesystem + operations on message queues. + + endif + + comment "Package build options" + + config DEBUG + bool + prompt "Compile packages with debugging info" + default n help - This will install binaries stripped using sstrip + Adds -g3 to the CFLAGS -endchoice + config IPV6 + bool + prompt "Enable IPv6 support in packages" + default y + help + Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts). -config USE_MKLIBS - bool "Strip unnecessary functions from libraries" - help - Reduces libraries to only those functions that are necessary for using all - selected packages (including those selected as ) - Note that this will make the system libraries incompatible with most of the packages - that are not selected during the build process + config PKG_BUILD_PARALLEL + bool + prompt "Compile certain packages parallelized" + default y + help + This adds a -jX option to certain packages that are known to + behave well for parallel build. By default the package make processes + use the main jobserver, in which case this option only takes effect + when you add -jX to the make command. + + If you are unsure, select N. + + config PKG_BUILD_USE_JOBSERVER + bool + prompt "Use top-level make jobserver for packages" + depends on PKG_BUILD_PARALLEL + default y + help + This passes the main make process jobserver fds to package builds, + enabling full parallelization across different packages + + Note that disabling this may overcommit CPU resources depending on the + -j level of the main make process, the number of package + submake jobs selected below and the number of actual CPUs present. + Example: If the main make is passed a -j4 and the submake -j + is also set to 4, we may end up with 16 parallel make processes + in the worst case. + + + config PKG_BUILD_JOBS + int + prompt "Number of package submake jobs (2-512)" + range 2 512 + default 2 + depends on PKG_BUILD_PARALLEL && !PKG_BUILD_USE_JOBSERVER + help + The number of jobs (-jX) to pass to packages submake. -config STRIP_KERNEL_EXPORTS - depends LINUX_2_6 - bool "Strip unnecessary exports from the kernel image" - help - Reduces kernel size by stripping unused kernel exports from the kernel image - Note that this might make the kernel incompatible with any kernel modules that - were not selected at the time the kernel image was created + config PKG_DEFAULT_PARALLEL + bool + prompt "Parallelize the default package build rule (May break build)" + depends on PKG_BUILD_PARALLEL + depends on BROKEN + default n + help + Always set the default package build rules to parallel build. -comment "Package build options" + WARNING: This may break build or kill your cat, as it builds + packages with multiple jobs that are probably not tested in + a parallel build environment. -config DEBUG - bool - prompt "Compile packages with debugging info" - default n - help - Adds -g3 to the CFLAGS + Only say Y, if you don't mind fixing broken packages. + Before reporting build bugs, set this to N and re-run the build. -config DEBUG_DIR - bool "Install debugging binaries into a staging directory" - default n - help - This will install all compiled package binaries into build_dir/target-*/debug-*/, - useful for cross-debugging via gdb/gdbserver + comment "Stripping options" -config IPV6 - bool - prompt "Enable IPv6 support in packages" - default n - help - Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts). + choice + prompt "Binary stripping method" + default USE_STRIP if EXTERNAL_TOOLCHAIN + default USE_STRIP if USE_GLIBC || USE_EGLIBC || USE_MUSL + default USE_SSTRIP + help + Select the binary stripping method you wish to use. + + config NO_STRIP + bool "none" + help + This will install unstripped binaries (useful for native compiling/debugging) + + config USE_STRIP + bool "strip" + help + This will install binaries stripped using strip from binutils + + + config USE_SSTRIP + bool "sstrip" + depends on !DEBUG + depends on !USE_GLIBC + depends on !USE_EGLIBC + help + This will install binaries stripped using sstrip + endchoice -comment "Kernel build options" + config STRIP_ARGS + string + prompt "Strip arguments" + depends on USE_STRIP + default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG + default "--strip-all" + help + Specifies arguments passed to the strip command when stripping binaries -config KERNEL_KALLSYMS - bool "Compile the kernel with symbol table information" - default n - help - This will give you more information in stack traces from kernel oopses + config STRIP_KERNEL_EXPORTS + bool "Strip unnecessary exports from the kernel image" + help + Reduces kernel size by stripping unused kernel exports from the kernel image + Note that this might make the kernel incompatible with any kernel modules that + were not selected at the time the kernel image was created -config KERNEL_PROFILING - bool "Compile the kernel with profiling enabled" - default n - help - Enable the extended profiling support mechanisms used by profilers such - as OProfile. + config USE_MKLIBS + bool "Strip unnecessary functions from libraries" + help + Reduces libraries to only those functions that are necessary for using all + selected packages (including those selected as ) + Note that this will make the system libraries incompatible with most of the packages + that are not selected during the build process -config KERNEL_DEBUG_FS - bool "Compile the kernel with Debug Filesystem enabled" - depends LINUX_2_6 - default y - help - debugfs is a virtual file system that kernel developers use to put - debugging files into. Enable this option to be able to read and - write to these files. + choice + prompt "Preferred standard C++ library" + default USE_LIBSTDCXX if USE_EGLIBC + default USE_UCLIBCXX + help + Select the preferred standard C++ library for all packages that support this. + + config USE_UCLIBCXX + bool "uClibc++" + + config USE_LIBSTDCXX + bool "libstdc++" + endchoice endmenu @@ -238,97 +758,108 @@ menuconfig DEVEL bool "Advanced configuration options (for developers)" default n -config BROKEN - bool - prompt "Show broken platforms / packages" if DEVEL - default n + config BROKEN + bool "Show broken platforms / packages" if DEVEL + default n -config DOWNLOAD_FOLDER - string - prompt "Download folder" if DEVEL - default "" + config DOWNLOAD_FOLDER + string "Download folder" if DEVEL + default "" -config LOCALMIRROR - string - prompt "Local mirror for source packages" if DEVEL + config LOCALMIRROR + string "Local mirror for source packages" if DEVEL + default "" -config AUTOREBUILD - bool - prompt "Automatic rebuild of packages" if DEVEL - default y - help - Automatically rebuild packages when their files change - -config BUILD_SUFFIX - string - prompt "Build suffix to append to the BUILD_DIR variable" if DEVEL - default "" - help - Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix - -config TARGET_ROOTFS_DIR - string - prompt "Override the default TARGET_ROOTFS_DIR variable" if DEVEL - default "" - help - Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path. - Use this option to re-define the location of the target root file system directory. - -config CCACHE - bool - prompt "Use ccache" if DEVEL - default n - help - Compiler cache; see http://ccache.samba.org/ - -config EXTERNAL_KERNEL_TREE - string - prompt "Use external kernel tree" if DEVEL - default "" - -config KERNEL_GIT_CLONE_URI - string - prompt "Enter git repository to clone" if DEVEL - default "" - help - Enter the full git repository path i.e.: - git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git - This will create a git clone of the kernel in your build - directory. - -config KERNEL_GIT_LOCAL_REPOSITORY - string - prompt "Enter path to local reference repository" if DEVEL - default "" - help - Enter a full pathname to a local reference git repository. - In this instance, the --refererence option of git clone will - be used thus creating a quick local clone of your repo. + config AUTOREBUILD + bool "Automatic rebuild of packages" if DEVEL + default y + help + Automatically rebuild packages when their files change + + config BUILD_SUFFIX + string "Build suffix to append to the BUILD_DIR variable" if DEVEL + default "" + help + Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix + + config TARGET_ROOTFS_DIR + string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL + default "" + help + Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path. + Use this option to re-define the location of the target root file system directory. + + config CCACHE + bool "Use ccache" if DEVEL + default n + help + Compiler cache; see http://ccache.samba.org/ + + config EXTERNAL_KERNEL_TREE + string "Use external kernel tree" if DEVEL + default "" + config KERNEL_GIT_CLONE_URI + string "Enter git repository to clone" if DEVEL + default "" + help + Enter the full git repository path i.e.: + git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + This will create a git clone of the kernel in your build + directory. + + config KERNEL_GIT_LOCAL_REPOSITORY + string "Enter path to local reference repository" if DEVEL + default "" + help + Enter a full pathname to a local reference git repository. + In this instance, the --refererence option of git clone will + be used thus creating a quick local clone of your repo. + + config BUILD_LOG + bool "Enable log files during build process" if DEVEL + help + If enabled log files will be written to the ./log directory + + config SRC_TREE_OVERRIDE + bool "Enable package source tree override" if DEVEL + help + If enabled, you can force a package to use a git tree as source + code instead of the normal tarball. Create a symlink 'git-src' + in the package directory, pointing to the .git tree that you want + to pull the source code from menuconfig TARGET_OPTIONS bool "Target Options" if DEVEL -config TARGET_OPTIMIZATION - string - prompt "Target Optimizations" if TARGET_OPTIONS - default DEFAULT_TARGET_OPTIMIZATION - help - Optimizations to use when building for the target host. + config TARGET_OPTIMIZATION + string "Target Optimizations" if TARGET_OPTIONS + default DEFAULT_TARGET_OPTIMIZATION + help + Optimizations to use when building for the target host. -config SOFT_FLOAT - bool - prompt "Use software floating point by default" if TARGET_OPTIONS - default y - depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU - help - If your target CPU does not have a Floating Point Unit (FPU) or a - kernel FPU emulator, but you still wish to support floating point - functions, then everything will need to be compiled with soft floating - point support (-msoft-float). + config SOFT_FLOAT + bool "Use software floating point by default" if TARGET_OPTIONS + default y + depends on (arm || armeb || powerpc || mipsel || mips || mips64el || mips64) && !HAS_FPU + help + If your target CPU does not have a Floating Point Unit (FPU) or a + kernel FPU emulator, but you still wish to support floating point + functions, then everything will need to be compiled with soft floating + point support (-msoft-float). - Most people will answer N. + Most people will answer N. + config USE_MIPS16 + bool "Build packages with MIPS16 instructions" if TARGET_OPTIONS + depends on HAS_MIPS16 + help + If your target CPU does support the MIPS16 instruction set + and you want to use it for packages, enable this option. + MIPS16 produces smaller binaries thus reducing pressure on + caches and TLB. + + Most people will answer N. source "toolchain/Config.in" @@ -337,5 +868,3 @@ source "target/sdk/Config.in" source "target/toolchain/Config.in" source "tmp/.config-package.in" - -