X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fadm5120%2Ffiles%2Fdrivers%2Fi2c%2Fbusses%2Fi2c-gpio-custom.c;h=36a8bf0e372ed832409b269d67e77f0a567065f8;hp=a019fafcc8c66f168bdd8be32e6622113534d54a;hb=0d507efc1664ebf6ae87fd85eee80d776f11579d;hpb=cf607b667b94b6ceed502de911c9b62c4dcdf4f0 diff --git a/target/linux/adm5120/files/drivers/i2c/busses/i2c-gpio-custom.c b/target/linux/adm5120/files/drivers/i2c/busses/i2c-gpio-custom.c index a019fafcc8..36a8bf0e37 100644 --- a/target/linux/adm5120/files/drivers/i2c/busses/i2c-gpio-custom.c +++ b/target/linux/adm5120/files/drivers/i2c/busses/i2c-gpio-custom.c @@ -6,6 +6,40 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * --------------------------------------------------------------------------- + * + * The behaviour of this driver can be altered by setting some parameters + * from the insmod command line. + * + * The following parameters are adjustable: + * + * bus0 These four arguments can be arrays of + * bus1 1-8 unsigned integers as follows: + * bus2 + * bus3 ,,,,,,, + * + * where: + * + * ID to used as device_id for the corresponding bus (required) + * GPIO pin ID to used for SDA (required) + * GPIO pin ID to used for SCL (required) + * signal toggle delay. + * clock stretching timeout. + * SDA is configured as open drain. + * SCL is configured as open drain. + * SCL output drivers cannot be turned off. + * + * See include/i2c-gpio.h for more information about the parameters. + * + * If this driver is built into the kernel, you can use the following kernel + * command line parameters, with the same values as the corresponding module + * parameters listed above: + * + * i2c-gpio-custom.bus0 + * i2c-gpio-custom.bus1 + * i2c-gpio-custom.bus2 + * i2c-gpio-custom.bus3 */ #include @@ -16,56 +50,148 @@ #include #define DRV_NAME "i2c-gpio-custom" -#define DRV_DESC "Custom GPIO I2C device driver" +#define DRV_DESC "Custom GPIO-based I2C driver" +#define DRV_VERSION "0.1.0" + +#define PFX DRV_NAME ": " + +#define BUS_PARAM_ID 0 +#define BUS_PARAM_SDA 1 +#define BUS_PARAM_SCL 2 +#define BUS_PARAM_UDELAY 3 +#define BUS_PARAM_TIMEOUT 4 +#define BUS_PARAM_SDA_OD 5 +#define BUS_PARAM_SCL_OD 6 +#define BUS_PARAM_SCL_OO 7 + +#define BUS_PARAM_REQUIRED 3 +#define BUS_PARAM_COUNT 8 +#define BUS_COUNT_MAX 4 + +static unsigned int bus0[BUS_PARAM_COUNT] __initdata; +static unsigned int bus1[BUS_PARAM_COUNT] __initdata; +static unsigned int bus2[BUS_PARAM_COUNT] __initdata; +static unsigned int bus3[BUS_PARAM_COUNT] __initdata; + +static unsigned int bus_nump[BUS_COUNT_MAX] __initdata; + +#define BUS_PARM_DESC \ + " config -> id,sda,scl[,udelay,timeout,sda_od,scl_od,scl_oo]" + +module_param_array(bus0, uint, &bus_nump[0], 0); +MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC); +module_param_array(bus1, uint, &bus_nump[1], 0); +MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC); +module_param_array(bus2, uint, &bus_nump[2], 0); +MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC); +module_param_array(bus3, uint, &bus_nump[3], 0); +MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC); + +static struct platform_device *devices[BUS_COUNT_MAX]; +static unsigned int nr_devices; + +static void i2c_gpio_custom_cleanup(void) +{ + int i; + + for (i = 0; i < nr_devices; i++) + if (devices[i]) + platform_device_unregister(devices[i]); +} -static unsigned int sda = CONFIG_I2C_GPIO_CUSTOM_SDA; -static unsigned int scl = CONFIG_I2C_GPIO_CUSTOM_SCL; -static int id = CONFIG_I2C_GPIO_CUSTOM_DEVICE_ID; +static int __init i2c_gpio_custom_add_one(unsigned int id, unsigned int *params) +{ + struct platform_device *pdev; + struct i2c_gpio_platform_data pdata; + int err; -module_param(sda, uint, S_IRUGO); -MODULE_PARM_DESC(sda, "GPIO pin for SDA"); + if (!bus_nump[id]) + return 0; -module_param(scl, uint, S_IRUGO); -MODULE_PARM_DESC(scl, "GPIO pin for SCL"); + if (bus_nump[id] < BUS_PARAM_REQUIRED) { + printk(KERN_ERR PFX "not enough parameters for bus%d\n", id); + err = -EINVAL; + goto err; + } -module_param(id, int, S_IRUGO); -MODULE_PARM_DESC(id, "device id of the i2c-gpio device"); + pdev = platform_device_alloc("i2c-gpio", params[BUS_PARAM_ID]); + if (!pdev) { + err = -ENOMEM; + goto err; + } -static struct i2c_gpio_platform_data i2c_data; -static struct platform_device i2c_device; + devices[nr_devices++] = pdev; -static void i2c_gpio_custom_release(struct platform_device *pdev) -{ - /* nothing to do */ + pdata.sda_pin = params[BUS_PARAM_SDA]; + pdata.scl_pin = params[BUS_PARAM_SCL]; + pdata.udelay = params[BUS_PARAM_UDELAY]; + pdata.timeout = params[BUS_PARAM_TIMEOUT]; + pdata.sda_is_open_drain = params[BUS_PARAM_SDA_OD] != 0; + pdata.scl_is_open_drain = params[BUS_PARAM_SCL_OD] != 0; + pdata.scl_is_output_only = params[BUS_PARAM_SCL_OO] != 0; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err; + + err = platform_device_register(pdev); + if (err) + goto err; + + return 0; + +err: + return err; } -static int __init i2c_gpio_custom_init(void) +static int __init i2c_gpio_custom_probe(void) { int err; - i2c_data.sda_pin = sda; - i2c_data.scl_pin = scl; + printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + + err = i2c_gpio_custom_add_one(0, bus0); + if (err) goto err; + + err = i2c_gpio_custom_add_one(1, bus1); + if (err) goto err; + + err = i2c_gpio_custom_add_one(2, bus2); + if (err) goto err; - i2c_device.name = "i2c-gpio"; - i2c_device.id = id; + err = i2c_gpio_custom_add_one(3, bus3); + if (err) goto err; - i2c_device.dev.platform_data = &i2c_data, - i2c_device.dev.release = i2c_gpio_custom_release, + if (!nr_devices) { + printk(KERN_ERR PFX "no bus parameter(s) specified\n"); + err = -ENODEV; + goto err; + } - err = platform_device_register(&i2c_device); + return 0; +err: + i2c_gpio_custom_cleanup(); return err; } -static void __exit i2c_gpio_custom_exit(void) +#ifdef MODULE +static int __init i2c_gpio_custom_init(void) { - platform_device_unregister(&i2c_device); + return i2c_gpio_custom_probe(); } - module_init(i2c_gpio_custom_init); + +static void __exit i2c_gpio_custom_exit(void) +{ + i2c_gpio_custom_cleanup(); +} module_exit(i2c_gpio_custom_exit); +#else +subsys_initcall(i2c_gpio_custom_probe); +#endif /* MODULE*/ MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Gabor Juhos "); MODULE_DESCRIPTION(DRV_DESC); - +MODULE_VERSION(DRV_VERSION);