X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Far71xx%2Fmach-ap83.c;h=bcd2faeb5f926c18295a9b1834441d546e712df7;hp=dfb9b6606d5262b60c8ec2dc9ebf0a38658d3130;hb=c1e8a5560a250f85411438381a27b98af7c9c3d4;hpb=66c1f790abc2d1cc0743c1daa7f4e9d1c0a8b3a4 diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c index dfb9b6606d..bcd2faeb5f 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c @@ -1,7 +1,7 @@ /* * Atheros AP83 board support * - * Copyright (C) 2008 Gabor Juhos + * Copyright (C) 2008-2009 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it @@ -9,13 +9,23 @@ * by the Free Software Foundation. */ +#include #include -#include +#include +#include +#include +#include +#include -#include #include -#include -#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" #define AP83_GPIO_LED_WLAN 6 #define AP83_GPIO_LED_POWER 14 @@ -23,6 +33,73 @@ #define AP83_GPIO_BTN_JUMPSTART 12 #define AP83_GPIO_BTN_RESET 21 +#define AP83_050_GPIO_VSC7385_CS 1 +#define AP83_050_GPIO_VSC7385_MISO 3 +#define AP83_050_GPIO_VSC7385_MOSI 16 +#define AP83_050_GPIO_VSC7385_SCK 17 + +#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition ap83_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x060000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x1a0000, + .size = 0x650000, + }, { + .name = "art", + .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x060000, + .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct ar91xx_flash_platform_data ap83_flash_data = { + .width = 2, +#ifdef CONFIG_MTD_PARTITIONS + .parts = ap83_flash_partitions, + .nr_parts = ARRAY_SIZE(ap83_flash_partitions), +#endif +}; + +static struct resource ap83_flash_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_flash_device = { + .name = "ar91xx-flash", + .id = -1, + .resource = ap83_flash_resources, + .num_resources = ARRAY_SIZE(ap83_flash_resources), + .dev = { + .platform_data = &ap83_flash_data, + } +}; + static struct gpio_led ap83_leds_gpio[] __initdata = { { .name = "ap83:green:jumpstart", @@ -39,47 +116,152 @@ static struct gpio_led ap83_leds_gpio[] __initdata = { }, }; -static struct gpio_button ap83_gpio_buttons[] __initdata = { +static struct gpio_keys_button ap83_gpio_keys[] __initdata = { { .desc = "soft_reset", .type = EV_KEY, - .code = BTN_0, - .threshold = 5, + .code = KEY_RESTART, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, .gpio = AP83_GPIO_BTN_RESET, .active_low = 1, - } , } + }, { .desc = "jumpstart", .type = EV_KEY, - .code = BTN_1, - .threshold = 5, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, .gpio = AP83_GPIO_BTN_JUMPSTART, .active_low = 1, } }; -static void __init ap83_setup(void) +static struct resource ap83_040_spi_resources[] = { + [0] = { + .start = AR71XX_SPI_BASE, + .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ap83_040_spi_device = { + .name = "ap83-spi", + .id = 0, + .resource = ap83_040_spi_resources, + .num_resources = ARRAY_SIZE(ap83_040_spi_resources), +}; + +static struct spi_gpio_platform_data ap83_050_spi_data = { + .miso = AP83_050_GPIO_VSC7385_MISO, + .mosi = AP83_050_GPIO_VSC7385_MOSI, + .sck = AP83_050_GPIO_VSC7385_SCK, + .num_chipselect = 1, +}; + +static struct platform_device ap83_050_spi_device = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &ap83_050_spi_data, + } +}; + +static void ap83_vsc7385_reset(void) { + ar71xx_device_stop(RESET_MODULE_GE1_PHY); + udelay(10); + ar71xx_device_start(RESET_MODULE_GE1_PHY); + mdelay(50); +} + +static struct vsc7385_platform_data ap83_vsc7385_data = { + .reset = ap83_vsc7385_reset, + .ucode_name = "vsc7385_ucode_ap83.bin", + .mac_cfg = { + .tx_ipg = 6, + .bit2 = 0, + .clk_sel = 3, + }, +}; + +static struct spi_board_info ap83_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "spi-vsc7385", + .platform_data = &ap83_vsc7385_data, + .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, + } +}; + +static void __init ap83_generic_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + ar71xx_add_device_mdio(0xfffffffe); + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.phy_mask = 0x1; ar71xx_add_device_eth(0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0x0; ar71xx_eth1_data.speed = SPEED_1000; ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; + ar71xx_add_device_eth(1); ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), ap83_leds_gpio); - ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons), - ap83_gpio_buttons); + ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap83_gpio_keys), + ap83_gpio_keys); ar71xx_add_device_usb(); + + ar9xxx_add_device_wmac(eeprom, NULL); + + platform_device_register(&ap83_flash_device); + + spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); +} + +static void __init ap83_040_setup(void) +{ + ap83_flash_data.is_shared = 1; + ap83_generic_setup(); + platform_device_register(&ap83_040_spi_device); +} + +static void __init ap83_050_setup(void) +{ + ap83_generic_setup(); + platform_device_register(&ap83_050_spi_device); +} + +static void __init ap83_setup(void) +{ + u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); + unsigned int board_version; + + board_version = (unsigned int)(board_id[0] - '0'); + board_version += ((unsigned int)(board_id[1] - '0')) * 10; + + switch (board_version) { + case 40: + ap83_040_setup(); + break; + case 50: + ap83_050_setup(); + break; + default: + printk(KERN_WARNING "AP83-%03u board is not yet supported\n", + board_version); + } } -MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup); +MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);