X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fatheros%2Fbase-files%2Fetc%2Fuci-defaults%2Fnetwork;h=68b9a2a27dd24ad9d3452b0a834bff633b480842;hp=fa97109404381167b186b031c85ad6a7e8394f4e;hb=8fd82f5e97cbf938ab5419afdb5a2a6d501fa119;hpb=5f168e014dd03d72b0ec57c42072c73de5be0460

diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network
index fa97109404..68b9a2a27d 100644
--- a/target/linux/atheros/base-files/etc/uci-defaults/network
+++ b/target/linux/atheros/base-files/etc/uci-defaults/network
@@ -1,11 +1,39 @@
 #!/bin/sh
 if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -o \
      -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
 	uci batch <<EOF
 set network.lan.ifname=eth0.1
 set network.wan=interface
 set network.wan.ifname=eth0.2
 set network.wan.proto=dhcp
-commit network
 EOF
+	HAS_SWITCH=1
 fi
+
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" ]; then
+	uci batch <<EOF
+set network.eth0=switch
+set network.eth0.reset=1
+set network.eth0.enable_vlan=1
+set network.eth0_1=switch_vlan
+set network.eth0_1.device=eth0
+set network.eth0_1.vlan=1
+set network.eth0_1.ports="0 1 2 3 5t"
+set network.eth0_2=switch_vlan
+set network.eth0_2.device=eth0
+set network.eth0_2.vlan=2
+set network.eth0_2.ports="4 5t"
+EOF
+	HAS_SWITCH=1
+fi
+
+[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
+	uci batch <<EOF
+set network.wan=interface
+set network.wan.ifname=eth1
+set network.wan.proto=dhcp
+EOF
+}
+
+uci commit network