X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Fbrcm63xx%2Fimage%2FMakefile;h=a53c9d4dbc9498593fc2525db305f2ce1cd9fe69;hp=fa1ccf7659b839ca182e55cee6d73e2d5b2c2cd9;hb=449964fff9e62e3f92b560b8472f43330a5dda0d;hpb=5c903cc55c673e5e6eda9c78f51a81b715eb4eec

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index fa1ccf7659..a53c9d4dbc 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -7,8 +7,8 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-LOADADDR = 0x8108c8f4		# RAM start + 16M 
-KERNEL_ENTRY = 0x80100000	# Default kernel entry in arch/mips/Makefile
+LOADADDR = 0x80010000		# RAM start + 16M 
+KERNEL_ENTRY = $(LOADADDR)	# Newer kernels add a jmp to the kernel_entry at the start of the binary
 RAMSIZE = 0x01000000		# 64MB
 
 LOADER_MAKEOPTS= \
@@ -27,22 +27,135 @@ define trxalign/squashfs
 -a 1024
 endef
 
+define Image/Build/CFE
+	# Generate the tagged image
+	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+		-o $(BIN_DIR)/openwrt-$(2)-$(1)-$(6)-cfe.bin \
+		-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+	        -t $(4) -d "$(5)" $(7)
+#		-b $(2) -c $(3) -e $(KERNEL_ENTRY) -l $(LOADADDR)
+
+endef
+
+define Image/Build/CFEAGPF
+	# Generate the tagged image
+	$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+		-o $(BIN_DIR)/openwrt-$(2)-$(1)-$(7)-cfe.bin \
+		-b $(2) -c $(3) -e $(LOADADDR) -l $(LOADADDR) \
+		-v 8 -m IMAGE -k 0x20000 -n $(4) -t $(5)
+endef
+
+define Image/Build/RedBoot
+	cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
+	gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
+	$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
+	dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
+	dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
+endef
+
+define Image/Build/CFEOLD
+	$(TOPDIR)/scripts/brcmImage.pl -t -p	\
+		-b $(2) -c $(3)			\
+		-k $(KDIR)/vmlinux.lzma.cfe	\
+		-r $(KDIR)/root.$(1)		\
+		-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
+endef
+
 define Build/Clean
 	$(MAKE) -C lzma-loader clean
 endef
 
 define Image/Prepare
+	# Standard LZMA kernel
 	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+
+	# CFE is a LZMA nazi! It took me hours to find out the parameters!
+	# Also I think lzma has a bug cause it generates different output depending on
+	# if you use stdin / stdout or not. Use files instead of stdio here, cause
+	# otherwise CFE will complain and not boot the image.
+	$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+
+	# Strip out the length, CFE doesn't like this
+	dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
+	dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+	rm -f $(KDIR)/vmlinux.lzma.tmp
+
+	# Build the LZMA loader
 	rm -f $(KDIR)/loader.gz
 	$(MAKE) -C lzma-loader \
 		BUILD_DIR="$(KDIR)" \
 		TARGET="$(KDIR)" \
 		clean install
+
 	echo -ne "\\x00" >> $(KDIR)/loader.gz
+	rm -f $(KDIR)/fs_mark
+	touch $(KDIR)/fs_mark
+	$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
 endef
 
 define Image/Build
-	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
+	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
+	dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
+	# Various routers
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bccfe,,bccfe,)
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bc221,,bc221,-y 5)
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bc300,,bc300,)
+	$(call Image/Build/CFE,$(1),96345GW2,6345,bc310,OpenWRT-$(REVISION),bc310,)
+	$(call Image/Build/CFE,$(1),96348GW,6348,bccfe,,bcfe,)
+	$(call Image/Build/CFE,$(1),96348GW,6348,bc221,,bc221,-y 5)
+	# BT Voyager V210_BTR
+	$(call Image/Build/CFE,$(1),V210_BB,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V210_ROI, V210_WB
+	$(call Image/Build/CFE,$(1),V210,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V2091_BTR
+	$(call Image/Build/CFE,$(1),V2091_BB,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V2091_ROI, V2091_WB
+	$(call Image/Build/CFE,$(1),V2091,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V220V, V220V_MGCP_BTR
+	$(call Image/Build/CFE,$(1),RTA1052V,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V2110, V2110_AA, V2110_ROI
+	$(call Image/Build/CFE,$(1),V2110,6348,bc221,,btvgr,-y 5)
+	# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
+	$(call Image/Build/CFE,$(1),V2500V_BB,6348,bc221,,btvgr,-y 5)
+	# Tecom GW6000
+	$(call Image/Build/CFE,$(1),96348GW,6348,bc300,,bc300,)
+	# Tecom GW6200
+	$(call Image/Build/CFE,$(1),96348GW,6348,bc310,$(shell printf '\x99'),gw6200)
+	# Neufbox4
+	$(call Image/Build/CFE,$(1),96358VW,6358,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96358VW,6358,bc310,OpenWRT-$(REVISION),nb4)
+	# Comtrend 536, 5621
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,bc300,,bc300)
+	# TP-Link 8900GB
+	$(call Image/Build/CFE,$(1),96348GW-11,6348,bc310,$(shell printf 'PRID\x89\x10\x00\x02'),td8900GB)
+	# Davolink DV201AMR
+	$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
+	# USR 9108
+	$(call Image/Build/CFE,$(1),96348GW-A,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-A,6348,bc300,,bc300)
+	# NetGear DG834GT, DG834PN
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,bc300,,bc300)
+	# Belkin f5d7633
+	$(call Image/Build/CFE,$(1),96348GW-10,6348,bc310,,bc310)
+	# D-Link DSL-2640B
+	$(call Image/Build/CFE,$(1),D-4P-W,6348,bc310,,bc310)
+
+	# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
+	$(call Image/Build/CFE,$(1),8L-2M-8M,6338,bc300,,bc300)
+
+	# Sagem F@ST2404
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bccfe,,bccfe)
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bc300,,bc300)
+	$(call Image/Build/CFE,$(1),F@ST2404,6348,bc310,OpenWRT-$(REVISION),bc310)
+	# Inventel Livebox
+	$(call Image/Build/RedBoot,livebox)
+	# D-Link DSL-2740B
+	$(call Image/Build/CFE,$(1),96358GW,6358,bc310,,dsl2740b)
+	# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
+	$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,bccfe,,bccfe)
+	$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,ag306,,agv2+w)
 endef
 
 $(eval $(call BuildImage))