X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F10-rt2x00-eeprom;h=5e6fa420d77d13639c7bad671cadf2b45d7652e1;hp=03ff4f81d4c2688c5b9824ec6ba61a7ba4f48edb;hb=81ca4a6a1d6e9543993f5f089778bb36ec63be1b;hpb=1f412020ced98a9e05925a17aab1a7c0e43350f5

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 03ff4f81d4..5e6fa420d7 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -23,13 +23,13 @@ rt2x00_eeprom_extract() {
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
+. /lib/ramips.sh
+
+board=$(ramips_board_name)
+
 case "$FIRMWARE" in
 "RT288X.eeprom" | \
 "RT305X.eeprom")
-	. /lib/ramips.sh
-
-	local board=$(ramips_board_name)
-
 	case $board in
 	dir-300-b1 | \
 	dir-600-b1 | \
@@ -37,21 +37,54 @@ case "$FIRMWARE" in
 		rt2x00_eeprom_extract "devdata" 16384 272
 		;;
 
-	f5d8235v2 | \
+	rt-g32-b1)
+		rt2x00_eeprom_extract "devconf" 0 272
+		;;
+
+	f5d8235-v1 | \
+	f5d8235-v2)
+		rt2x00_eeprom_extract "u-boot" 262144 272
+		;;
+
+	all0256n | \
+	argus-atp52b | \
+	bc2 | \
+	esr-9753 | \
 	fonera20n | \
 	hw550-3g | \
 	mofi3500-3gn | \
 	pwh2004 | \
+	nbg-419n | \
+	nw718 | \
+	omni-emb | \
 	rt-n15 | \
+	v11st-fe | \
 	v22rw-2x2 | \
-	wcr150gn | \
-	whr-g300n)
+	w502u | \
+	wcr-150gn | \
+	whr-g300n | \
+	wl-351 | \
+	wli-tx4-ag300n | \
+	wr512-3gn | \
+	wr6202)
 		rt2x00_eeprom_extract "factory" 0 272
 		;;
 
+	wl341v3)
+		rt2x00_eeprom_extract "board-nvram" 64880 272
+		;;
+
 	*)
 		rt2x00_eeprom_die "board $board is not supported yet"
 		;;
 	esac
 	;;
-esac
\ No newline at end of file
+
+"rt2x00pci_1_0.eeprom")
+	case $board in
+	rt-n56u)
+		rt2x00_eeprom_extract "factory" 32768 272
+		;;
+	esac
+	;;
+esac