ar71xx: image: update Build/Image/Planex macro
authorGabor Juhos <juhosg@openwrt.org>
Mon, 23 Sep 2013 12:14:20 +0000 (12:14 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 23 Sep 2013 12:14:20 +0000 (12:14 +0000)
 - remove the 'kernel' and 'rootfs' partitions from the mtd layout,
 - move the .okli image into the uImage,
 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the MZK-W300NH board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38139

target/linux/ar71xx/image/Makefile

index 8e9f3ed..6d50c05 100644 (file)
@@ -188,7 +188,7 @@ ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmw
 dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
 dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
 pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
-planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1024k(kernel),6656k(rootfs),128k(art)ro,7744k@0x50000(firmware)
+planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
 ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
 uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
 ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
@@ -533,16 +533,17 @@ Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mt
 
 define Image/Build/Planex/buildkernel
        [ -e "$(KDIR)/loader-$(2).gz" ]
-       $(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
        $(call MkuImageOKLI,$(2))
        ( \
-               dd if=$(KDIR_TMP)/vmlinux-$(2).uImage bs=8k count=1 conv=sync; \
+               dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
                dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
        ) > $(KDIR_TMP)/kernel-$(2).bin
+       $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
 endef
 
 define Image/Build/Planex
-       $(call Sysupgrade/KR,$(1),$(KDIR_TMP)/kernel-$(2).bin,1048576,6750208,$(2))
+       $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
+       $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
        if [ -e "$(call sysupname,$(1),$(2))" ]; then \
                $(STAGING_DIR_HOST)/bin/mkplanexfw \
                        -B $(2) \
@@ -925,8 +926,8 @@ $(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
 $(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
 $(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
 
-$(eval $(call SingleProfile,Planex,64k,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
-$(eval $(call SingleProfile,Planex,64k,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
+$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
+$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
 
 $(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392))