+++ /dev/null
-From 1735daf1db79d338dccfc55444b52ed52af79e86 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 20 Nov 2011 18:22:35 +0100
-Subject: [PATCH 15/21] bcma: scan for extra address space
-
-Some cores like the USB core have two address spaces. In the USB host
-controller one address space is used for the OHCI and the other for the
-EHCI controller interface. The USB controller is the only core I found
-with two address spaces. This code is based on the AI scan function
-ai_scan() in shared/aiutils.c i the Broadcom SDK.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/scan.c | 17 ++++++++++++++++-
- include/linux/bcma/bcma.h | 1 +
- 2 files changed, 17 insertions(+), 1 deletions(-)
-
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -286,6 +286,21 @@ static int bcma_get_next_core(struct bcm
- return -EILSEQ;
- }
-
-+
-+ /* First Slave Address Descriptor should be port 0:
-+ * the main register space for the core
-+ */
-+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
-+ if (tmp < 0) {
-+ /* Try again to see if it is a bridge */
-+ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_BRIDGE, 0);
-+ if (tmp) {
-+ printk("found bridge\n");
-+ }
-+
-+ }
-+ core->addr = tmp;
-+
- /* get & parse slave ports */
- for (i = 0; i < ports[1]; i++) {
- for (j = 0; ; j++) {
-@@ -298,7 +313,7 @@ static int bcma_get_next_core(struct bcm
- break;
- } else {
- if (i == 0 && j == 0)
-- core->addr = tmp;
-+ core->addr1 = tmp;
- }
- }
- }
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -138,6 +138,7 @@ struct bcma_device {
- u8 core_index;
-
- u32 addr;
-+ u32 addr1;
- u32 wrap;
-
- void __iomem *io_addr;
+++ /dev/null
-From 6e8ae6e2cee0e7e5939dc7042584c808366e61e0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 27 Nov 2011 14:01:01 +0100
-Subject: [PATCH 16/21] =?UTF-8?q?bcma:=20add=20function=20to=20check=20every?=
- =?UTF-8?q?=2010=20=C2=B5s=20if=20a=20reg=20is=20set?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This function checks if a reg get set or cleared every 10 microseconds.
-It is used in bcma_core_set_clockmode() and bcma_core_pll_ctl() to
-reduce code duplication. In addition it is needed in the USB host
-driver.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/core.c | 48 ++++++++++++++++++++++++++++----------------
- include/linux/bcma/bcma.h | 2 +
- 2 files changed, 32 insertions(+), 18 deletions(-)
-
---- a/drivers/bcma/core.c
-+++ b/drivers/bcma/core.c
-@@ -52,11 +52,36 @@ int bcma_core_enable(struct bcma_device
- }
- EXPORT_SYMBOL_GPL(bcma_core_enable);
-
-+/* Wait for bitmask in a register to get set or cleared.
-+ * timeout is in units of ten-microseconds.
-+ */
-+int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, int timeout,
-+ int set)
-+{
-+ int i;
-+ u32 val;
-+
-+ for (i = 0; i < timeout; i++) {
-+ val = bcma_read32(dev, reg);
-+ if (set) {
-+ if ((val & bitmask) == bitmask)
-+ return 0;
-+ } else {
-+ if (!(val & bitmask))
-+ return 0;
-+ }
-+ udelay(10);
-+ }
-+ pr_err("Timeout waiting for bitmask %08X on register %04X to %s.\n",
-+ bitmask, reg, (set ? "set" : "clear"));
-+
-+ return -ETIMEDOUT;
-+}
-+EXPORT_SYMBOL_GPL(bcma_wait_bits);
-+
- void bcma_core_set_clockmode(struct bcma_device *core,
- enum bcma_clkmode clkmode)
- {
-- u16 i;
--
- WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
- core->id.id != BCMA_CORE_PCIE &&
- core->id.id != BCMA_CORE_80211);
-@@ -65,15 +90,8 @@ void bcma_core_set_clockmode(struct bcma
- case BCMA_CLKMODE_FAST:
- bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
- udelay(64);
-- for (i = 0; i < 1500; i++) {
-- if (bcma_read32(core, BCMA_CLKCTLST) &
-- BCMA_CLKCTLST_HAVEHT) {
-- i = 0;
-- break;
-- }
-- udelay(10);
-- }
-- if (i)
-+ if (bcma_wait_bits(core, BCMA_CLKCTLST, BCMA_CLKCTLST_HAVEHT,
-+ 1500, 1))
- pr_err("HT force timeout\n");
- break;
- case BCMA_CLKMODE_DYNAMIC:
-@@ -85,22 +103,12 @@ EXPORT_SYMBOL_GPL(bcma_core_set_clockmod
-
- void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
- {
-- u16 i;
--
- WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
- WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
-
- if (on) {
- bcma_set32(core, BCMA_CLKCTLST, req);
-- for (i = 0; i < 10000; i++) {
-- if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
-- status) {
-- i = 0;
-- break;
-- }
-- udelay(10);
-- }
-- if (i)
-+ if (bcma_wait_bits(core, BCMA_CLKCTLST, status, 10000, 1))
- pr_err("PLL enable timeout\n");
- } else {
- pr_warn("Disabling PLL not supported yet!\n");
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -283,6 +283,9 @@ static inline void bcma_maskset16(struct
- bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
- }
-
-+extern int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
-+ int timeout, int set);
-+
- extern bool bcma_core_is_enabled(struct bcma_device *core);
- extern void bcma_core_disable(struct bcma_device *core, u32 flags);
- extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+++ /dev/null
-From 14297ee700e1c2e04a35466304f9a3c5e1387146 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:20:54 +0100
-Subject: [PATCH 17/30] USB: OHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their OHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB OHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 10 ++
- drivers/usb/host/ohci-hcd.c | 21 ++++-
- drivers/usb/host/ohci-platform.c | 197 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 227 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
- Enable support for the CNS3XXX SOC's on-chip OHCI controller.
- It is needed for low-speed USB 1.0 device support.
-
-+config USB_OHCI_HCD_PLATFORM
-+ bool "OHCI driver for a platform device"
-+ depends on USB_OHCI_HCD && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Adds an OHCI host driver for a generic platform device, which
-+ provieds a memory space and an irq.
-+
-+ If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_xls_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
-+#include "ohci-platform.c"
-+#define PLATFORM_OHCI_DRIVER ohci_platform_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
-@@ -1125,7 +1130,8 @@ MODULE_LICENSE ("GPL");
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
-- !defined(SSB_OHCI_DRIVER)
-+ !defined(SSB_OHCI_DRIVER) && \
-+ !defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-
-@@ -1209,9 +1215,19 @@ static int __init ohci_hcd_mod_init(void
- goto error_tmio;
- #endif
-
-+#ifdef PLATFORM_OHCI_DRIVER
-+ retval = platform_driver_register(&PLATFORM_OHCI_DRIVER);
-+ if (retval)
-+ goto error_platform;
-+#endif
-+
- return retval;
-
- /* Error path */
-+#ifdef PLATFORM_OHCI_DRIVER
-+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+ error_platform:
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- platform_driver_unregister(&TMIO_OHCI_DRIVER);
- error_tmio:
-@@ -1265,6 +1281,9 @@ module_init(ohci_hcd_mod_init);
-
- static void __exit ohci_hcd_mod_exit(void)
- {
-+#ifdef PLATFORM_OHCI_DRIVER
-+ platform_driver_unregister(&PLATFORM_OHCI_DRIVER);
-+#endif
- #ifdef TMIO_OHCI_DRIVER
- platform_driver_unregister(&TMIO_OHCI_DRIVER);
- #endif
---- /dev/null
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -0,0 +1,197 @@
-+/*
-+ * Generic platform ohci driver
-+ *
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ohci_platform_reset(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int err;
-+
-+ ohci_hcd_init(ohci);
-+ err = ohci_init(ohci);
-+
-+ return err;
-+}
-+
-+static int ohci_platform_start(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int err;
-+
-+ err = ohci_run(ohci);
-+ if (err < 0) {
-+ ohci_err(ohci, "can't start\n");
-+ ohci_stop(hcd);
-+ }
-+
-+ return err;
-+}
-+
-+static const struct hc_driver ohci_platform_hc_driver = {
-+ .description = "platform-usb-ohci",
-+ .product_desc = "Generic Platform OHCI Controller",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_MEMORY | HCD_USB11,
-+
-+ .reset = ohci_platform_reset,
-+ .start = ohci_platform_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+
-+ .get_frame_number = ohci_get_frame,
-+
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+#ifdef CONFIG_PM
-+ .bus_suspend = ohci_bus_suspend,
-+ .bus_resume = ohci_bus_resume,
-+#endif
-+
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int ohci_platform_attach(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+ struct resource *res_irq, *res_mem;
-+ int err = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ goto err_return;
-+
-+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+ if (!res_irq) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+ if (!res_mem) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ platform_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_return:
-+ return err;
-+}
-+
-+static int ohci_platform_probe(struct platform_device *dev)
-+{
-+ int err;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* We currently always attach BCMA_DEV_USB11_HOSTDEV
-+ * as HOST OHCI. If we want to attach it as Client device,
-+ * we must branch here and call into the (yet to
-+ * be written) Client mode driver. Same for remove(). */
-+
-+ err = ohci_platform_attach(dev);
-+
-+ return err;
-+}
-+
-+static int ohci_platform_remove(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return -ENODEV;
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+static void ohci_platform_shutdown(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return;
-+
-+ if (hcd->driver->shutdown)
-+ hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ohci_platform_suspend(struct platform_device *dev,
-+ pm_message_t state)
-+{
-+
-+ return 0;
-+}
-+
-+static int ohci_platform_resume(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+ ohci_finish_controller_resume(hcd);
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ohci_platform_suspend NULL
-+#define ohci_platform_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ohci_platform_table[] = {
-+ { "ohci-platform", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(platform, ohci_platform_table);
-+
-+static struct platform_driver ohci_platform_driver = {
-+ .id_table = ohci_platform_table,
-+ .probe = ohci_platform_probe,
-+ .remove = ohci_platform_remove,
-+ .shutdown = ohci_platform_shutdown,
-+ .suspend = ohci_platform_suspend,
-+ .resume = ohci_platform_resume,
-+ .driver = {
-+ .name = "ohci-platform",
-+ }
-+};
+++ /dev/null
-From 2ade1c32109d2f17fdfc0b414411d4ee7f828706 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:28:56 +0100
-Subject: [PATCH 18/30] USB: EHCI: Add a generic platform device driver
-
-This adds a generic driver for platform devices. It works like the PCI
-driver and is based on it. This is for devices which do not have an own
-bus but their EHCI controller works like a PCI controller. It will be
-used for the Broadcom bcma and ssb USB EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 10 ++
- drivers/usb/host/ehci-hcd.c | 5 +
- drivers/usb/host/ehci-platform.c | 211 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 226 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ehci-platform.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
-
- If unsure, say N.
-
-+config USB_EHCI_HCD_PLATFORM
-+ bool "Generic EHCI driver for a platform device"
-+ depends on USB_EHCI_HCD && EXPERIMENTAL
-+ default n
-+ ---help---
-+ Adds an EHCI host driver for a generic platform device, which
-+ provieds a memory space and an irq.
-+
-+ If unsure, say N.
-+
- config USB_OHCI_BIG_ENDIAN_DESC
- bool
- depends on USB_OHCI_HCD
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_xls_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
-+#include "ehci-platform.c"
-+#define PLATFORM_DRIVER ehci_platform_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
---- /dev/null
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -0,0 +1,211 @@
-+/*
-+ * Generic platform ehci driver
-+ *
-+ * Copyright 2007 Steven Brown <sbrown@cortland.com>
-+ * Copyright 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Derived from the ohci-ssb driver
-+ * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Derived from the EHCI-PCI driver
-+ * Copyright (c) 2000-2004 by David Brownell
-+ *
-+ * Derived from the ohci-pci driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/platform_device.h>
-+
-+static int ehci_platform_reset(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval;
-+
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs +
-+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+
-+ dbg_hcs_params(ehci, "reset");
-+ dbg_hcc_params(ehci, "reset");
-+
-+ /* cache this readonly data; minimize chip reads */
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+
-+ retval = ehci_halt(ehci);
-+ if (retval)
-+ return retval;
-+
-+ /* data structure init */
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ ehci_reset(ehci);
-+
-+ ehci_port_power(ehci, 1);
-+
-+ return retval;
-+}
-+
-+static const struct hc_driver ehci_platform_hc_driver = {
-+ .description = "platform-usb-ehci",
-+ .product_desc = "Generic Platform EHCI Controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_platform_reset,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+ .endpoint_reset = ehci_endpoint_reset,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+#if defined(CONFIG_PM)
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+#endif
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+
-+ .update_device = ehci_update_device,
-+
-+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-+};
-+
-+static int ehci_platform_attach(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+ struct resource *res_irq, *res_mem;
-+ int err = -ENOMEM;
-+
-+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ goto err_return;
-+
-+ res_irq = platform_get_resource(dev, IORESOURCE_IRQ, 0);
-+ if (!res_irq) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-+ if (!res_mem) {
-+ err = -ENXIO;
-+ goto err_return;
-+ }
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ /*
-+ * start & size modified per sbutils.c
-+ */
-+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs)
-+ goto err_put_hcd;
-+ err = usb_add_hcd(hcd, res_irq->start, IRQF_SHARED);
-+ if (err)
-+ goto err_iounmap;
-+
-+ platform_set_drvdata(dev, hcd);
-+
-+ return err;
-+
-+err_iounmap:
-+ iounmap(hcd->regs);
-+err_put_hcd:
-+ usb_put_hcd(hcd);
-+err_return:
-+ return err;
-+}
-+
-+static int ehci_platform_probe(struct platform_device *dev)
-+{
-+ int err;
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ err = ehci_platform_attach(dev);
-+
-+ return err;
-+}
-+
-+static int ehci_platform_remove(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return -ENODEV;
-+
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ usb_put_hcd(hcd);
-+
-+ return 0;
-+}
-+
-+static void ehci_platform_shutdown(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(dev);
-+ if (!hcd)
-+ return;
-+
-+ if (hcd->driver->shutdown)
-+ hcd->driver->shutdown(hcd);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ehci_platform_suspend(struct platform_device *dev,
-+ pm_message_t state)
-+{
-+ return 0;
-+}
-+
-+static int ehci_platform_resume(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+
-+ ehci_finish_controller_resume(hcd);
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ehci_platform_suspend NULL
-+#define ehci_platform_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct platform_device_id ehci_platform_table[] = {
-+ { "ehci-platform", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(platform, ehci_platform_table);
-+
-+static struct platform_driver ehci_platform_driver = {
-+ .id_table = ehci_platform_table,
-+ .probe = ehci_platform_probe,
-+ .remove = ehci_platform_remove,
-+ .shutdown = ehci_platform_shutdown,
-+ .suspend = ehci_platform_suspend,
-+ .resume = ehci_platform_resume,
-+ .driver = {
-+ .name = "ehci-platform",
-+ }
-+};
+++ /dev/null
-From 0da055d81f77272ebc41d4c2cd5f533aa9025cc7 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:33:41 +0100
-Subject: [PATCH 19/30] USB: Add driver for the bcma bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom bcma bus. The bcma bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the bcma bus at the same time.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 12 ++
- drivers/usb/host/Makefile | 1 +
- drivers/usb/host/bcma-hcd.c | 309 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 322 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/bcma-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -618,3 +618,15 @@ config USB_PXA168_EHCI
- help
- Enable support for Marvell PXA168 SoC's on-chip EHCI
- host controller
-+
-+config USB_HCD_BCMA
-+ tristate "BCMA usb host driver"
-+ depends on BCMA && EXPERIMENTAL
-+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+ help
-+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+ It converts the bcma driver into two platform device drivers
-+ for ehci and ohci.
-+
-+ If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
- obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
- obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
-+obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -0,0 +1,309 @@
-+/*
-+ * Broadcom specific Advanced Microcontroller Bus
-+ * Broadcom USB-core driver (BCMA bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/bcma/bcma.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
-+MODULE_LICENSE("GPL");
-+
-+struct bcma_hcd_device {
-+ struct platform_device *ehci_dev;
-+ struct platform_device *ohci_dev;
-+};
-+
-+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
-+{
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
-+ /* Work around for 4716 failures. */
-+ if (dev->bus->chipinfo.id == 0x4716) {
-+ u32 tmp;
-+
-+ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
-+ if (tmp >= 480000000)
-+ tmp = 0x1846b; /* set CDR to 0x11(fast) */
-+ else if (tmp == 453000000)
-+ tmp = 0x1046b; /* set CDR to 0x10(slow) */
-+ else
-+ tmp = 0;
-+
-+ /* Change Shim mdio control reg to fix host not acking at
-+ * high frequencies
-+ */
-+ if (tmp) {
-+ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
-+ udelay(500);
-+
-+ bcma_write32(dev, 0x524, tmp);
-+ udelay(500);
-+ bcma_write32(dev, 0x524, 0x4ab);
-+ udelay(500);
-+ bcma_read32(dev, 0x528);
-+ bcma_write32(dev, 0x528, 0x80000000);
-+ }
-+ }
-+#endif /* CONFIG_BCMA_DRIVER_MIPS */
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
-+{
-+ u32 tmp;
-+
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * 1. Since the core supports both OHCI and EHCI functions, it must
-+ * only be reset once.
-+ *
-+ * 2. In addition to the standard SI reset sequence, the Host Control
-+ * Register must be programmed to bring the USB core and various
-+ * phy components out of reset.
-+ */
-+ if (!bcma_core_is_enabled(dev)) {
-+ bcma_core_enable(dev, 0);
-+ mdelay(10);
-+ if (dev->id.rev >= 5) {
-+ /* Enable Misc PLL */
-+ tmp = bcma_read32(dev, 0x1e0);
-+ tmp |= 0x100;
-+ bcma_write32(dev, 0x1e0, tmp);
-+ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100, 1))
-+ printk(KERN_EMERG "Failed to enable misc PPL!\n");
-+
-+ /* Take out of resets */
-+ bcma_write32(dev, 0x200, 0x4ff);
-+ udelay(25);
-+ bcma_write32(dev, 0x200, 0x6ff);
-+ udelay(25);
-+
-+ /* Make sure digital and AFE are locked in USB PHY */
-+ bcma_write32(dev, 0x524, 0x6b);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0xab);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0x2b);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+ udelay(50);
-+ bcma_write32(dev, 0x524, 0x10ab);
-+ udelay(50);
-+ tmp = bcma_read32(dev, 0x524);
-+
-+ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000, 1)) {
-+ tmp = bcma_read32(dev, 0x528);
-+ printk(KERN_EMERG
-+ "USB20H mdio_rddata 0x%08x\n", tmp);
-+ }
-+ bcma_write32(dev, 0x528, 0x80000000);
-+ tmp = bcma_read32(dev, 0x314);
-+ udelay(265);
-+ bcma_write32(dev, 0x200, 0x7ff);
-+ udelay(10);
-+
-+ /* Take USB and HSIC out of non-driving modes */
-+ bcma_write32(dev, 0x510, 0);
-+ } else {
-+ bcma_write32(dev, 0x200, 0x7ff);
-+
-+ udelay(1);
-+ }
-+
-+ bcma_hcd_4716wa(dev);
-+ }
-+}
-+
-+static struct platform_device * __devinit
-+bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
-+{
-+ struct platform_device *hci_dev;
-+ struct resource hci_res[2];
-+ int ret = -ENOMEM;
-+
-+ memset(hci_res, 0, sizeof(hci_res));
-+
-+ hci_res[0].start = addr;
-+ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
-+ hci_res[0].flags = IORESOURCE_MEM;
-+
-+ hci_res[1].start = dev->irq;
-+ hci_res[1].flags = IORESOURCE_IRQ;
-+
-+ hci_dev = platform_device_alloc(name, 0);
-+ if (!hci_dev)
-+ goto err_alloc;
-+
-+ hci_dev->dev.parent = &dev->dev;
-+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+ ret = platform_device_add_resources(hci_dev, hci_res,
-+ ARRAY_SIZE(hci_res));
-+ if (ret)
-+ goto err_alloc;
-+
-+ ret = platform_device_add(hci_dev);
-+ if (ret) {
-+err_alloc:
-+ platform_device_put(hci_dev);
-+ return ERR_PTR(ret);
-+ }
-+
-+ return hci_dev;
-+}
-+
-+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
-+{
-+ int err;
-+ u16 chipid_top;
-+ u32 ohci_addr;
-+ struct bcma_hcd_device *usb_dev;
-+ struct bcma_chipinfo *chipinfo;
-+
-+ chipinfo = &dev->bus->chipinfo;
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (chipinfo->id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+ return -EOPNOTSUPP;
-+
-+ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+
-+ bcma_hcd_init_chip(dev);
-+
-+ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
-+ ohci_addr = dev->addr1;
-+ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
-+ && chipinfo->rev == 0)
-+ ohci_addr = 0x18009000;
-+
-+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
-+ ohci_addr);
-+ if (IS_ERR(usb_dev->ohci_dev)) {
-+ err = PTR_ERR(usb_dev->ohci_dev);
-+ goto err_free_usb_dev;
-+ }
-+
-+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
-+ dev->addr);
-+ if (IS_ERR(usb_dev->ehci_dev)) {
-+ err = PTR_ERR(usb_dev->ehci_dev);
-+ goto err_unregister_ohci_dev;
-+ }
-+
-+ bcma_set_drvdata(dev, usb_dev);
-+ return 0;
-+
-+err_unregister_ohci_dev:
-+ platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+ kfree(usb_dev);
-+ return err;
-+}
-+
-+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
-+{
-+ struct bcma_hcd_device *usb_dev;
-+ struct platform_device *ohci_dev;
-+ struct platform_device *ehci_dev;
-+
-+ usb_dev = bcma_get_drvdata(dev);
-+ if (!usb_dev)
-+ return;
-+
-+ ohci_dev = usb_dev->ohci_dev;
-+ ehci_dev = usb_dev->ehci_dev;
-+
-+ if (ohci_dev) {
-+ platform_device_unregister(ohci_dev);
-+ }
-+ if (ehci_dev) {
-+ platform_device_unregister(ehci_dev);
-+ }
-+
-+ bcma_core_disable(dev, 0);
-+}
-+
-+static void bcma_hcd_shutdown(struct bcma_device *dev)
-+{
-+ bcma_core_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
-+{
-+ bcma_core_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int bcma_hcd_resume(struct bcma_device *dev)
-+{
-+ bcma_core_enable(dev, 0);
-+
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define bcma_hcd_suspend NULL
-+#define bcma_hcd_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
-+
-+static struct bcma_driver bcma_hcd_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = bcma_hcd_table,
-+ .probe = bcma_hcd_probe,
-+ .remove = __devexit_p(bcma_hcd_remove),
-+ .shutdown = bcma_hcd_shutdown,
-+ .suspend = bcma_hcd_suspend,
-+ .resume = bcma_hcd_resume,
-+};
-+
-+static int __init bcma_hcd_init(void)
-+{
-+ return bcma_driver_register(&bcma_hcd_driver);
-+}
-+module_init(bcma_hcd_init);
-+
-+static void __exit bcma_hcd_exit(void)
-+{
-+ bcma_driver_unregister(&bcma_hcd_driver);
-+}
-+module_exit(bcma_hcd_exit);
+++ /dev/null
-From ca1db834336ac19edc7a5d342f8acece1ae1feb9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:35:17 +0100
-Subject: [PATCH 20/30] USB: Add driver for the ssb bus
-
-This adds a USB driver using the generic platform device driver for the
-USB controller found on the Broadcom ssb bus. The ssb bus just
-exposes one device which serves the OHCI and the EHCI controller at the
-same time. This driver probes for this USB controller and creates and
-registers two new platform devices which will be probed by the new
-generic platform device driver. This makes it possible to use the EHCI
-and the OCHI controller on the ssb bus at the same time.
-
-The old ssb OHCI USB driver will be removed in the next step as this
-driver also provide an OHCI driver and an EHCI for the cores supporting
-it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 12 ++
- drivers/usb/host/Makefile | 1 +
- drivers/usb/host/ssb-hcd.c | 272 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 285 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/host/ssb-hcd.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -630,3 +630,15 @@ config USB_HCD_BCMA
- for ehci and ohci.
-
- If unsure, say N.
-+
-+config USB_HCD_SSB
-+ tristate "SSB usb host driver"
-+ depends on SSB && EXPERIMENTAL
-+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
-+ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
-+ help
-+ Enbale support for the EHCI and OCHI host controller on an bcma bus.
-+ It converts the bcma driver into two platform device drivers
-+ for ehci and ohci.
-+
-+ If unsure, say N.
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -38,3 +38,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-m
- obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
- obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
- obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
-+obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
---- /dev/null
-+++ b/drivers/usb/host/ssb-hcd.c
-@@ -0,0 +1,272 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom USB-core driver (SSB bus glue)
-+ *
-+ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Based on ssb-ohci driver
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Derived from the OHCI-PCI driver
-+ * Copyright 1999 Roman Weissgaerber
-+ * Copyright 2000-2002 David Brownell
-+ * Copyright 1999 Linus Torvalds
-+ * Copyright 1999 Gregory P. Smith
-+ *
-+ * Derived from the USBcore related parts of Broadcom-SB
-+ * Copyright 2005-2011 Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/ssb/ssb.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
-+MODULE_LICENSE("GPL");
-+
-+#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
-+
-+struct ssb_hcd_device {
-+ struct platform_device *ehci_dev;
-+ struct platform_device *ohci_dev;
-+
-+ u32 enable_flags;
-+};
-+
-+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
-+{
-+#ifdef CONFIG_SSB_DRIVER_MIPS
-+ /* Work around for 5354 failures */
-+ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-+ /* Change syn01 reg */
-+ ssb_write32(dev, 0x894, 0x00fe00fe);
-+
-+ /* Change syn03 reg */
-+ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
-+ }
-+#endif
-+}
-+
-+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
-+{
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+ /*
-+ * USB 2.0 special considerations:
-+ *
-+ * In addition to the standard SSB reset sequence, the Host
-+ * Control Register must be programmed to bring the USB core
-+ * and various phy components out of reset.
-+ */
-+ ssb_write32(dev, 0x200, 0x7ff);
-+
-+ /* Change Flush control reg */
-+ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
-+ ssb_read32(dev, 0x400);
-+
-+ /* Change Shim control reg */
-+ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
-+ ssb_read32(dev, 0x304);
-+
-+ udelay(1);
-+
-+ ssb_hcd_5354wa(dev);
-+ }
-+}
-+
-+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
-+{
-+ u32 flags = 0;
-+
-+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+ /* Put the device into host-mode. */
-+ flags |= SSB_HCD_TMSLOW_HOSTMODE;
-+
-+ ssb_device_enable(dev, flags);
-+
-+ ssb_hcd_usb20wa(dev);
-+
-+ return flags;
-+}
-+
-+static struct platform_device * __devinit
-+ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len)
-+{
-+ struct platform_device *hci_dev;
-+ struct resource hci_res[2];
-+ int ret = -ENOMEM;
-+
-+ memset(hci_res, 0, sizeof(hci_res));
-+
-+ hci_res[0].start = addr;
-+ hci_res[0].end = hci_res[0].start + len - 1;
-+ hci_res[0].flags = IORESOURCE_MEM;
-+
-+ hci_res[1].start = dev->irq;
-+ hci_res[1].flags = IORESOURCE_IRQ;
-+
-+ hci_dev = platform_device_alloc(name, 0);
-+ if (!hci_dev)
-+ goto err_alloc;
-+
-+ hci_dev->dev.parent = dev->dev;
-+ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
-+
-+ ret = platform_device_add_resources(hci_dev, hci_res, 2);
-+ if (ret)
-+ goto err_alloc;
-+
-+ ret = platform_device_add(hci_dev);
-+ if (ret) {
-+err_alloc:
-+ platform_device_put(hci_dev);
-+ return ERR_PTR(ret);
-+ }
-+
-+ return hci_dev;
-+}
-+
-+static int __devinit ssb_hcd_probe(struct ssb_device *dev,
-+ const struct ssb_device_id *id)
-+{
-+ int err, tmp;
-+ int start, len;
-+ u16 chipid_top;
-+ struct ssb_hcd_device *usb_dev;
-+
-+ /* USBcores are only connected on embedded devices. */
-+ chipid_top = (dev->bus->chip_id & 0xFF00);
-+ if (chipid_top != 0x4700 && chipid_top != 0x5300)
-+ return -ENODEV;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-+ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-+ return -EOPNOTSUPP;
-+
-+ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+
-+ /* We currently always attach SSB_DEV_USB11_HOSTDEV
-+ * as HOST OHCI. If we want to attach it as Client device,
-+ * we must branch here and call into the (yet to
-+ * be written) Client mode driver. Same for remove(). */
-+ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
-+
-+ tmp = ssb_read32(dev, SSB_ADMATCH0);
-+
-+ start = ssb_admatch_base(tmp);
-+ len = ssb_admatch_size(tmp);
-+ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
-+ len);
-+ if (IS_ERR(usb_dev->ohci_dev)) {
-+ err = PTR_ERR(usb_dev->ohci_dev);
-+ goto err_free_usb_dev;
-+ }
-+
-+ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
-+ len = 0x100; /* ehci reg block size */
-+ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
-+ start, len);
-+ if (IS_ERR(usb_dev->ehci_dev)) {
-+ err = PTR_ERR(usb_dev->ehci_dev);
-+ goto err_unregister_ohci_dev;
-+ }
-+ }
-+
-+ ssb_set_drvdata(dev, usb_dev);
-+ return 0;
-+
-+err_unregister_ohci_dev:
-+ platform_device_unregister(usb_dev->ohci_dev);
-+err_free_usb_dev:
-+ kfree(usb_dev);
-+ return err;
-+}
-+
-+static void __devexit ssb_hcd_remove(struct ssb_device *dev)
-+{
-+ struct ssb_hcd_device *usb_dev;
-+ struct platform_device *ohci_dev;
-+ struct platform_device *ehci_dev;
-+
-+ usb_dev = ssb_get_drvdata(dev);
-+ if (!usb_dev)
-+ return;
-+
-+ ohci_dev = usb_dev->ohci_dev;
-+ ehci_dev = usb_dev->ehci_dev;
-+
-+ if (ohci_dev) {
-+ platform_device_unregister(ohci_dev);
-+ }
-+ if (ehci_dev) {
-+ platform_device_unregister(ehci_dev);
-+ }
-+
-+ ssb_device_disable(dev, 0);
-+}
-+
-+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
-+{
-+ ssb_device_disable(dev, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
-+{
-+ ssb_device_disable(dev, 0);
-+
-+ return 0;
-+}
-+
-+static int ssb_hcd_resume(struct ssb_device *dev)
-+{
-+ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
-+
-+ ssb_device_enable(dev, usb_dev->enable_flags);
-+
-+ return 0;
-+}
-+
-+#else /* !CONFIG_PM */
-+#define ssb_hcd_suspend NULL
-+#define ssb_hcd_resume NULL
-+#endif /* CONFIG_PM */
-+
-+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
-+
-+static struct ssb_driver ssb_hcd_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = ssb_hcd_table,
-+ .probe = ssb_hcd_probe,
-+ .remove = __devexit_p(ssb_hcd_remove),
-+ .shutdown = ssb_hcd_shutdown,
-+ .suspend = ssb_hcd_suspend,
-+ .resume = ssb_hcd_resume,
-+};
-+
-+static int __init ssb_hcd_init(void)
-+{
-+ return ssb_driver_register(&ssb_hcd_driver);
-+}
-+module_init(ssb_hcd_init);
-+
-+static void __exit ssb_hcd_exit(void)
-+{
-+ ssb_driver_unregister(&ssb_hcd_driver);
-+}
-+module_exit(ssb_hcd_exit);
+++ /dev/null
-From 77190e21ed262397eb924e6d48e12ecf3e9f6316 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 26 Nov 2011 21:36:50 +0100
-Subject: [PATCH 21/30] USB: OHCI: remove old SSB OHCI driver
-
-This is now replaced by the new ssb USB driver, which also supports
-devices with an EHCI controller.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/Kconfig | 13 --
- drivers/usb/host/ohci-hcd.c | 19 ---
- drivers/usb/host/ohci-ssb.c | 260 -------------------------------------------
- 3 files changed, 0 insertions(+), 292 deletions(-)
- delete mode 100644 drivers/usb/host/ohci-ssb.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
- Enables support for PCI-bus plug-in USB controller cards.
- If unsure, say Y.
-
--config USB_OHCI_HCD_SSB
-- bool "OHCI support for Broadcom SSB OHCI core"
-- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
-- default n
-- ---help---
-- Support for the Sonics Silicon Backplane (SSB) attached
-- Broadcom USB OHCI core.
--
-- This device is present in some embedded devices with
-- Broadcom based SSB bus.
--
-- If unsure, say N.
--
- config USB_OHCI_SH
- bool "OHCI support for SuperH USB controller"
- depends on USB_OHCI_HCD && SUPERH
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
- #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
- #endif
-
--#ifdef CONFIG_USB_OHCI_HCD_SSB
--#include "ohci-ssb.c"
--#define SSB_OHCI_DRIVER ssb_ohci_driver
--#endif
--
- #ifdef CONFIG_MFD_SM501
- #include "ohci-sm501.c"
- #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
-@@ -1130,7 +1125,6 @@ MODULE_LICENSE ("GPL");
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(SM501_OHCI_DRIVER) && \
- !defined(TMIO_OHCI_DRIVER) && \
-- !defined(SSB_OHCI_DRIVER) && \
- !defined(PLATFORM_OHCI_DRIVER)
- #error "missing bus glue for ohci-hcd"
- #endif
-@@ -1197,12 +1191,6 @@ static int __init ohci_hcd_mod_init(void
- goto error_pci;
- #endif
-
--#ifdef SSB_OHCI_DRIVER
-- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-- if (retval)
-- goto error_ssb;
--#endif
--
- #ifdef SM501_OHCI_DRIVER
- retval = platform_driver_register(&SM501_OHCI_DRIVER);
- if (retval < 0)
-@@ -1236,10 +1224,6 @@ static int __init ohci_hcd_mod_init(void
- platform_driver_unregister(&SM501_OHCI_DRIVER);
- error_sm501:
- #endif
--#ifdef SSB_OHCI_DRIVER
-- ssb_driver_unregister(&SSB_OHCI_DRIVER);
-- error_ssb:
--#endif
- #ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-@@ -1290,9 +1274,6 @@ static void __exit ohci_hcd_mod_exit(voi
- #ifdef SM501_OHCI_DRIVER
- platform_driver_unregister(&SM501_OHCI_DRIVER);
- #endif
--#ifdef SSB_OHCI_DRIVER
-- ssb_driver_unregister(&SSB_OHCI_DRIVER);
--#endif
- #ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- #endif
---- a/drivers/usb/host/ohci-ssb.c
-+++ /dev/null
-@@ -1,260 +0,0 @@
--/*
-- * Sonics Silicon Backplane
-- * Broadcom USB-core OHCI driver
-- *
-- * Copyright 2007 Michael Buesch <m@bues.ch>
-- *
-- * Derived from the OHCI-PCI driver
-- * Copyright 1999 Roman Weissgaerber
-- * Copyright 2000-2002 David Brownell
-- * Copyright 1999 Linus Torvalds
-- * Copyright 1999 Gregory P. Smith
-- *
-- * Derived from the USBcore related parts of Broadcom-SB
-- * Copyright 2005 Broadcom Corporation
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-- */
--#include <linux/ssb/ssb.h>
--
--
--#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
--
--struct ssb_ohci_device {
-- struct ohci_hcd ohci; /* _must_ be at the beginning. */
--
-- u32 enable_flags;
--};
--
--static inline
--struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
--{
-- return (struct ssb_ohci_device *)(hcd->hcd_priv);
--}
--
--
--static int ssb_ohci_reset(struct usb_hcd *hcd)
--{
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-- struct ohci_hcd *ohci = &ohcidev->ohci;
-- int err;
--
-- ohci_hcd_init(ohci);
-- err = ohci_init(ohci);
--
-- return err;
--}
--
--static int ssb_ohci_start(struct usb_hcd *hcd)
--{
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-- struct ohci_hcd *ohci = &ohcidev->ohci;
-- int err;
--
-- err = ohci_run(ohci);
-- if (err < 0) {
-- ohci_err(ohci, "can't start\n");
-- ohci_stop(hcd);
-- }
--
-- return err;
--}
--
--static const struct hc_driver ssb_ohci_hc_driver = {
-- .description = "ssb-usb-ohci",
-- .product_desc = "SSB OHCI Controller",
-- .hcd_priv_size = sizeof(struct ssb_ohci_device),
--
-- .irq = ohci_irq,
-- .flags = HCD_MEMORY | HCD_USB11,
--
-- .reset = ssb_ohci_reset,
-- .start = ssb_ohci_start,
-- .stop = ohci_stop,
-- .shutdown = ohci_shutdown,
--
-- .urb_enqueue = ohci_urb_enqueue,
-- .urb_dequeue = ohci_urb_dequeue,
-- .endpoint_disable = ohci_endpoint_disable,
--
-- .get_frame_number = ohci_get_frame,
--
-- .hub_status_data = ohci_hub_status_data,
-- .hub_control = ohci_hub_control,
--#ifdef CONFIG_PM
-- .bus_suspend = ohci_bus_suspend,
-- .bus_resume = ohci_bus_resume,
--#endif
--
-- .start_port_reset = ohci_start_port_reset,
--};
--
--static void ssb_ohci_detach(struct ssb_device *dev)
--{
-- struct usb_hcd *hcd = ssb_get_drvdata(dev);
--
-- if (hcd->driver->shutdown)
-- hcd->driver->shutdown(hcd);
-- usb_remove_hcd(hcd);
-- iounmap(hcd->regs);
-- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- usb_put_hcd(hcd);
-- ssb_device_disable(dev, 0);
--}
--
--static int ssb_ohci_attach(struct ssb_device *dev)
--{
-- struct ssb_ohci_device *ohcidev;
-- struct usb_hcd *hcd;
-- int err = -ENOMEM;
-- u32 tmp, flags = 0;
--
-- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-- return -EOPNOTSUPP;
--
-- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-- /* Put the device into host-mode. */
-- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-- ssb_device_enable(dev, flags);
-- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-- /*
-- * USB 2.0 special considerations:
-- *
-- * In addition to the standard SSB reset sequence, the Host
-- * Control Register must be programmed to bring the USB core
-- * and various phy components out of reset.
-- */
-- ssb_device_enable(dev, 0);
-- ssb_write32(dev, 0x200, 0x7ff);
--
-- /* Change Flush control reg */
-- tmp = ssb_read32(dev, 0x400);
-- tmp &= ~8;
-- ssb_write32(dev, 0x400, tmp);
-- tmp = ssb_read32(dev, 0x400);
--
-- /* Change Shim control reg */
-- tmp = ssb_read32(dev, 0x304);
-- tmp &= ~0x100;
-- ssb_write32(dev, 0x304, tmp);
-- tmp = ssb_read32(dev, 0x304);
--
-- udelay(1);
--
-- /* Work around for 5354 failures */
-- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-- /* Change syn01 reg */
-- tmp = 0x00fe00fe;
-- ssb_write32(dev, 0x894, tmp);
--
-- /* Change syn03 reg */
-- tmp = ssb_read32(dev, 0x89c);
-- tmp |= 0x1;
-- ssb_write32(dev, 0x89c, tmp);
-- }
-- } else
-- ssb_device_enable(dev, 0);
--
-- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-- dev_name(dev->dev));
-- if (!hcd)
-- goto err_dev_disable;
-- ohcidev = hcd_to_ssb_ohci(hcd);
-- ohcidev->enable_flags = flags;
--
-- tmp = ssb_read32(dev, SSB_ADMATCH0);
-- hcd->rsrc_start = ssb_admatch_base(tmp);
-- hcd->rsrc_len = ssb_admatch_size(tmp);
-- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-- if (!hcd->regs)
-- goto err_put_hcd;
-- err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
-- if (err)
-- goto err_iounmap;
--
-- ssb_set_drvdata(dev, hcd);
--
-- return err;
--
--err_iounmap:
-- iounmap(hcd->regs);
--err_put_hcd:
-- usb_put_hcd(hcd);
--err_dev_disable:
-- ssb_device_disable(dev, flags);
-- return err;
--}
--
--static int ssb_ohci_probe(struct ssb_device *dev,
-- const struct ssb_device_id *id)
--{
-- int err;
-- u16 chipid_top;
--
-- /* USBcores are only connected on embedded devices. */
-- chipid_top = (dev->bus->chip_id & 0xFF00);
-- if (chipid_top != 0x4700 && chipid_top != 0x5300)
-- return -ENODEV;
--
-- /* TODO: Probably need checks here; is the core connected? */
--
-- if (usb_disabled())
-- return -ENODEV;
--
-- /* We currently always attach SSB_DEV_USB11_HOSTDEV
-- * as HOST OHCI. If we want to attach it as Client device,
-- * we must branch here and call into the (yet to
-- * be written) Client mode driver. Same for remove(). */
--
-- err = ssb_ohci_attach(dev);
--
-- return err;
--}
--
--static void ssb_ohci_remove(struct ssb_device *dev)
--{
-- ssb_ohci_detach(dev);
--}
--
--#ifdef CONFIG_PM
--
--static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
--{
-- ssb_device_disable(dev, 0);
--
-- return 0;
--}
--
--static int ssb_ohci_resume(struct ssb_device *dev)
--{
-- struct usb_hcd *hcd = ssb_get_drvdata(dev);
-- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
--
-- ssb_device_enable(dev, ohcidev->enable_flags);
--
-- ohci_finish_controller_resume(hcd);
-- return 0;
--}
--
--#else /* !CONFIG_PM */
--#define ssb_ohci_suspend NULL
--#define ssb_ohci_resume NULL
--#endif /* CONFIG_PM */
--
--static const struct ssb_device_id ssb_ohci_table[] = {
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-- SSB_DEVTABLE_END
--};
--MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
--
--static struct ssb_driver ssb_ohci_driver = {
-- .name = KBUILD_MODNAME,
-- .id_table = ssb_ohci_table,
-- .probe = ssb_ohci_probe,
-- .remove = ssb_ohci_remove,
-- .suspend = ssb_ohci_suspend,
-- .resume = ssb_ohci_resume,
--};
--- /dev/null
+From d85bba4eb399a8273aabaef5c21c89820d7a0514 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 9 Feb 2012 23:14:57 +0100
+Subject: [PATCH 180/186] USB: HCI: add struct for ehci and ohci platform
+ driver
+
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ include/linux/usb/hci_driver.h | 32 ++++++++++++++++++++++++++++++++
+ 1 files changed, 32 insertions(+), 0 deletions(-)
+ create mode 100644 include/linux/usb/hci_driver.h
+
+--- /dev/null
++++ b/include/linux/usb/hci_driver.h
+@@ -0,0 +1,32 @@
++/*
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software Foundation,
++ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef __USB_CORE_HCI_PDRIVER_H
++#define __USB_CORE_HCI_PDRIVER_H
++
++#define USB_HCI_PDATA_PORT_POWER_SET (1 << 0)
++#define USB_HCI_PDATA_HAS_TT_SET (1 << 1)
++
++struct usb_hci_pdata {
++ int flags;
++ int caps_offset;
++ unsigned has_tt:1;
++ unsigned power_set_is_on:1;
++};
++
++#endif /* __USB_CORE_HCI_PDRIVER_H */
--- /dev/null
+From 2232a2ab6015496fecdfad68a9d6794312a9b2f2 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:20:54 +0100
+Subject: [PATCH 181/186] USB: OHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their OHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB OHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ohci-hcd.c | 5 +
+ drivers/usb/host/ohci-platform.c | 183 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 198 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ohci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -378,6 +378,16 @@ config USB_CNS3XXX_OHCI
+ Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+ It is needed for low-speed USB 1.0 device support.
+
++config USB_OHCI_HCD_PLATFORM
++ bool "OHCI driver for a platform device"
++ depends on USB_OHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an OHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1116,6 +1116,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ohci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_HCD_PLATFORM
++#include "ohci-platform.c"
++#define PLATFORM_DRIVER ohci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OMAP1_PLATFORM_DRIVER) && \
+--- /dev/null
++++ b/drivers/usb/host/ohci-platform.c
+@@ -0,0 +1,183 @@
++/*
++ * Generic platform ohci driver
++ *
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the OCHI-SSB driver
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++#include <linux/usb/hci_driver.h>
++
++static int ohci_platform_reset(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ ohci_hcd_init(ohci);
++ err = ohci_init(ohci);
++
++ return err;
++}
++
++static int ohci_platform_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int err;
++
++ err = ohci_run(ohci);
++ if (err < 0) {
++ ohci_err(ohci, "can't start\n");
++ ohci_stop(hcd);
++ }
++
++ return err;
++}
++
++static const struct hc_driver ohci_platform_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "Generic Platform OHCI Controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_MEMORY | HCD_USB11,
++
++ .reset = ohci_platform_reset,
++ .start = ohci_platform_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++
++ .get_frame_number = ohci_get_frame,
++
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++#ifdef CONFIG_PM
++ .bus_suspend = ohci_bus_suspend,
++ .bus_resume = ohci_bus_resume,
++#endif
++
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int __devinit ohci_platform_probe(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_mem;
++ int irq;
++ int err = -ENOMEM;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ irq = platform_get_irq(dev, 0);
++ if (irq < 0) {
++ pr_err("no irq provieded");
++ return irq;
++ }
++
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ pr_err("no memory recourse provieded");
++ return -ENXIO;
++ }
++
++ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ return -ENOMEM;
++
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = resource_size(res_mem);
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_err("controller already in use");
++ err = -EBUSY;
++ goto err_put_hcd;
++ }
++
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_release_region;
++ err = usb_add_hcd(hcd, irq, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_release_region:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++err_put_hcd:
++ usb_put_hcd(hcd);
++ return err;
++}
++
++static int __devexit ohci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++ platform_set_drvdata(dev, NULL);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int ohci_platform_suspend(struct device *dev)
++{
++ return 0;
++}
++
++static int ohci_platform_resume(struct device *dev)
++{
++ struct usb_hcd *hcd = dev_get_drvdata(dev);
++
++ ohci_finish_controller_resume(hcd);
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ohci_platform_suspend NULL
++#define ohci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ohci_platform_table[] = {
++ { "ohci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ohci_platform_table);
++
++static const struct dev_pm_ops ohci_platform_pm_ops = {
++ .suspend = ohci_platform_suspend,
++ .resume = ohci_platform_resume,
++};
++
++static struct platform_driver ohci_platform_driver = {
++ .id_table = ohci_platform_table,
++ .probe = ohci_platform_probe,
++ .remove = __devexit_p(ohci_platform_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "ohci-platform",
++ .pm = &ohci_platform_pm_ops,
++ }
++};
--- /dev/null
+From 1be00523336ac484c52681f838dfb8a76e8531cd Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:28:56 +0100
+Subject: [PATCH 182/186] USB: EHCI: Add a generic platform device driver
+
+This adds a generic driver for platform devices. It works like the PCI
+driver and is based on it. This is for devices which do not have an own
+bus but their EHCI controller works like a PCI controller. It will be
+used for the Broadcom bcma and ssb USB EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 10 ++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ drivers/usb/host/ehci-platform.c | 199 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 214 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ehci-platform.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -388,6 +388,16 @@ config USB_OHCI_HCD_PLATFORM
+
+ If unsure, say N.
+
++config USB_EHCI_HCD_PLATFORM
++ bool "Generic EHCI driver for a platform device"
++ depends on USB_EHCI_HCD && EXPERIMENTAL
++ default n
++ ---help---
++ Adds an EHCI host driver for a generic platform device, which
++ provieds a memory space and an irq.
++
++ If unsure, say N.
++
+ config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1329,6 +1329,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ehci_xls_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
++#include "ehci-platform.c"
++#define PLATFORM_DRIVER ehci_platform_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+ !defined(XILINX_OF_PLATFORM_DRIVER)
+--- /dev/null
++++ b/drivers/usb/host/ehci-platform.c
+@@ -0,0 +1,199 @@
++/*
++ * Generic platform ehci driver
++ *
++ * Copyright 2007 Steven Brown <sbrown@cortland.com>
++ * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Derived from the ohci-ssb driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the EHCI-PCI driver
++ * Copyright (c) 2000-2004 by David Brownell
++ *
++ * Derived from the ohci-pci driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/platform_device.h>
++#include <linux/usb/hci_driver.h>
++
++static int ehci_platform_reset(struct usb_hcd *hcd)
++{
++ struct platform_device *pdev = to_platform_device(hcd->self.controller);
++ struct usb_hci_pdata *pdata = pdev->dev.platform_data;
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int caps_offset = 0;
++ int flags = 0;
++ int retval;
++
++ if (pdata) {
++ caps_offset = pdata->caps_offset;
++ flags = pdata->flags;
++ }
++
++ if (flags & USB_HCI_PDATA_HAS_TT_SET)
++ hcd->has_tt = pdata->has_tt;
++
++ ehci->caps = hcd->regs + caps_offset;
++ retval = ehci_setup(hcd);
++ if (retval)
++ return retval;
++
++ if (flags & USB_HCI_PDATA_PORT_POWER_SET)
++ ehci_port_power(ehci, pdata->power_set_is_on);
++
++ return 0;
++}
++
++static const struct hc_driver ehci_platform_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "Generic Platform EHCI Controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_platform_reset,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++ .endpoint_reset = ehci_endpoint_reset,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#if defined(CONFIG_PM)
++ .bus_suspend = ehci_bus_suspend,
++ .bus_resume = ehci_bus_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++
++ .update_device = ehci_update_device,
++
++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
++};
++
++static int __devinit ehci_platform_probe(struct platform_device *dev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res_mem;
++ int irq;
++ int err = -ENOMEM;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ irq = platform_get_irq(dev, 0);
++ if (irq < 0) {
++ pr_err("no irq provieded");
++ return irq;
++ }
++ res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
++ if (!res_mem) {
++ pr_err("no memory recourse provieded");
++ return -ENXIO;
++ }
++
++ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
++ dev_name(&dev->dev));
++ if (!hcd)
++ return -ENOMEM;
++
++ hcd->rsrc_start = res_mem->start;
++ hcd->rsrc_len = resource_size(res_mem);
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ pr_err("controller already in use");
++ err = -EBUSY;
++ goto err_put_hcd;
++ }
++
++ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs)
++ goto err_release_region;
++ err = usb_add_hcd(hcd, irq, IRQF_SHARED);
++ if (err)
++ goto err_iounmap;
++
++ platform_set_drvdata(dev, hcd);
++
++ return err;
++
++err_iounmap:
++ iounmap(hcd->regs);
++err_release_region:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++err_put_hcd:
++ usb_put_hcd(hcd);
++ return err;
++}
++
++static int __devexit ehci_platform_remove(struct platform_device *dev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(dev);
++
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++ platform_set_drvdata(dev, NULL);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int ehci_platform_suspend(struct device *dev)
++{
++ struct usb_hcd *hcd = dev_get_drvdata(dev);
++ bool wakeup = device_may_wakeup(dev);
++
++ ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup);
++ return 0;
++}
++
++static int ehci_platform_resume(struct device *dev)
++{
++ struct usb_hcd *hcd = dev_get_drvdata(dev);
++
++ ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ehci_platform_suspend NULL
++#define ehci_platform_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct platform_device_id ehci_platform_table[] = {
++ { "ehci-platform", 0 },
++ { }
++};
++MODULE_DEVICE_TABLE(platform, ehci_platform_table);
++
++static const struct dev_pm_ops ehci_platform_pm_ops = {
++ .suspend = ehci_platform_suspend,
++ .resume = ehci_platform_resume,
++};
++
++static struct platform_driver ehci_platform_driver = {
++ .id_table = ehci_platform_table,
++ .probe = ehci_platform_probe,
++ .remove = __devexit_p(ehci_platform_remove),
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .owner = THIS_MODULE,
++ .name = "ehci-platform",
++ .pm = &ehci_platform_pm_ops,
++ }
++};
--- /dev/null
+From adebff2358c2b631fc04e31ba87eee48e546c655 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 20 Nov 2011 18:22:35 +0100
+Subject: [PATCH 183/186] bcma: scan for extra address space
+
+Some cores like the USB core have two address spaces. In the USB host
+controller one address space is used for the OHCI and the other for the
+EHCI controller interface. The USB controller is the only core I found
+with two address spaces. This code is based on the AI scan function
+ai_scan() in shared/aiutils.c i the Broadcom SDK.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/bcma/scan.c | 18 +++++++++++++++++-
+ include/linux/bcma/bcma.h | 1 +
+ 2 files changed, 18 insertions(+), 1 deletions(-)
+
+--- a/drivers/bcma/scan.c
++++ b/drivers/bcma/scan.c
+@@ -297,6 +297,22 @@ static int bcma_get_next_core(struct bcm
+ return -EILSEQ;
+ }
+
++
++ /* First Slave Address Descriptor should be port 0:
++ * the main register space for the core
++ */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
++ if (tmp <= 0) {
++ /* Try again to see if it is a bridge */
++ tmp = bcma_erom_get_addr_desc(bus, eromptr,
++ SCAN_ADDR_TYPE_BRIDGE, 0);
++ if (tmp > 0) {
++ pr_info("found bridge");
++ return -ENXIO;
++ }
++ }
++ core->addr = tmp;
++
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+@@ -309,7 +325,7 @@ static int bcma_get_next_core(struct bcm
+ break;
+ } else {
+ if (i == 0 && j == 0)
+- core->addr = tmp;
++ core->addr1 = tmp;
+ }
+ }
+ }
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -139,6 +139,7 @@ struct bcma_device {
+ u8 core_unit;
+
+ u32 addr;
++ u32 addr1;
+ u32 wrap;
+
+ void __iomem *io_addr;
--- /dev/null
+From 70fc4b2a6200ef7a1b99a6aa28234b919f23b43c Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:33:41 +0100
+Subject: [PATCH 184/186] USB: Add driver for the bcma bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom bcma bus. The bcma bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the bcma bus at the same time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/bcma-hcd.c | 328 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 341 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/bcma-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -618,3 +618,15 @@ config USB_PXA168_EHCI
+ help
+ Enable support for Marvell PXA168 SoC's on-chip EHCI
+ host controller
++
++config USB_HCD_BCMA
++ tristate "BCMA usb host driver"
++ depends on BCMA && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
++obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -0,0 +1,328 @@
++/*
++ * Broadcom specific Advanced Microcontroller Bus
++ * Broadcom USB-core driver (BCMA bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/bcma/bcma.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/usb/hci_driver.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
++MODULE_LICENSE("GPL");
++
++struct bcma_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++};
++
++/* Wait for bitmask in a register to get set or cleared.
++ * timeout is in units of ten-microseconds.
++ */
++static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
++ int timeout)
++{
++ int i;
++ u32 val;
++
++ for (i = 0; i < timeout; i++) {
++ val = bcma_read32(dev, reg);
++ if ((val & bitmask) == bitmask)
++ return 0;
++ udelay(10);
++ }
++
++ return -ETIMEDOUT;
++}
++
++static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
++{
++#ifdef CONFIG_BCMA_DRIVER_MIPS
++ /* Work around for 4716 failures. */
++ if (dev->bus->chipinfo.id == 0x4716) {
++ u32 tmp;
++
++ tmp = bcma_cpu_clock(&dev->bus->drv_mips);
++ if (tmp >= 480000000)
++ tmp = 0x1846b; /* set CDR to 0x11(fast) */
++ else if (tmp == 453000000)
++ tmp = 0x1046b; /* set CDR to 0x10(slow) */
++ else
++ tmp = 0;
++
++ /* Change Shim mdio control reg to fix host not acking at
++ * high frequencies
++ */
++ if (tmp) {
++ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
++ udelay(500);
++
++ bcma_write32(dev, 0x524, tmp);
++ udelay(500);
++ bcma_write32(dev, 0x524, 0x4ab);
++ udelay(500);
++ bcma_read32(dev, 0x528);
++ bcma_write32(dev, 0x528, 0x80000000);
++ }
++ }
++#endif /* CONFIG_BCMA_DRIVER_MIPS */
++}
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
++{
++ u32 tmp;
++
++ /*
++ * USB 2.0 special considerations:
++ *
++ * 1. Since the core supports both OHCI and EHCI functions, it must
++ * only be reset once.
++ *
++ * 2. In addition to the standard SI reset sequence, the Host Control
++ * Register must be programmed to bring the USB core and various
++ * phy components out of reset.
++ */
++ if (!bcma_core_is_enabled(dev)) {
++ bcma_core_enable(dev, 0);
++ mdelay(10);
++ if (dev->id.rev >= 5) {
++ /* Enable Misc PLL */
++ tmp = bcma_read32(dev, 0x1e0);
++ tmp |= 0x100;
++ bcma_write32(dev, 0x1e0, tmp);
++ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
++ printk(KERN_EMERG "Failed to enable misc PPL!\n");
++
++ /* Take out of resets */
++ bcma_write32(dev, 0x200, 0x4ff);
++ udelay(25);
++ bcma_write32(dev, 0x200, 0x6ff);
++ udelay(25);
++
++ /* Make sure digital and AFE are locked in USB PHY */
++ bcma_write32(dev, 0x524, 0x6b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0xab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x2b);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++ udelay(50);
++ bcma_write32(dev, 0x524, 0x10ab);
++ udelay(50);
++ tmp = bcma_read32(dev, 0x524);
++
++ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
++ tmp = bcma_read32(dev, 0x528);
++ printk(KERN_EMERG
++ "USB20H mdio_rddata 0x%08x\n", tmp);
++ }
++ bcma_write32(dev, 0x528, 0x80000000);
++ tmp = bcma_read32(dev, 0x314);
++ udelay(265);
++ bcma_write32(dev, 0x200, 0x7ff);
++ udelay(10);
++
++ /* Take USB and HSIC out of non-driving modes */
++ bcma_write32(dev, 0x510, 0);
++ } else {
++ bcma_write32(dev, 0x200, 0x7ff);
++
++ udelay(1);
++ }
++
++ bcma_hcd_4716wa(dev);
++ }
++}
++
++static const struct usb_hci_pdata p_data = {
++ .flags = USB_HCI_PDATA_PORT_POWER_SET,
++ .power_set_is_on = 1,
++};
++
++static struct platform_device * __devinit
++bcma_hcd_create_pdev(struct bcma_device *dev, char *name, u32 addr)
++{
++ struct platform_device *hci_dev;
++ struct resource hci_res[2];
++ int ret = -ENOMEM;
++
++ memset(hci_res, 0, sizeof(hci_res));
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + 0x1000 - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ return NULL;
++
++ hci_dev->dev.parent = &dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res,
++ ARRAY_SIZE(hci_res));
++ if (ret)
++ goto err_alloc;
++ ret = platform_device_add_data(hci_dev, &p_data, sizeof(p_data));
++ if (ret)
++ goto err_alloc;
++ ret = platform_device_add(hci_dev);
++ if (ret)
++ goto err_alloc;
++
++ return hci_dev;
++
++err_alloc:
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++}
++
++static int __devinit bcma_hcd_probe(struct bcma_device *dev)
++{
++ int err;
++ u16 chipid_top;
++ u32 ohci_addr;
++ struct bcma_hcd_device *usb_dev;
++ struct bcma_chipinfo *chipinfo;
++
++ chipinfo = &dev->bus->chipinfo;
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (chipinfo->id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ bcma_hcd_init_chip(dev);
++
++ /* In AI chips EHCI is addrspace 0, OHCI is 1 */
++ ohci_addr = dev->addr1;
++ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
++ && chipinfo->rev == 0)
++ ohci_addr = 0x18009000;
++
++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
++ ohci_addr);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
++ dev->addr);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++ }
++
++ bcma_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void __devexit bcma_hcd_remove(struct bcma_device *dev)
++{
++ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
++ struct platform_device *ohci_dev = usb_dev->ohci_dev;
++ struct platform_device *ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev)
++ platform_device_unregister(ohci_dev);
++ if (ehci_dev)
++ platform_device_unregister(ehci_dev);
++
++ bcma_core_disable(dev, 0);
++}
++
++static void bcma_hcd_shutdown(struct bcma_device *dev)
++{
++ bcma_core_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state)
++{
++ bcma_core_disable(dev, 0);
++
++ return 0;
++}
++
++static int bcma_hcd_resume(struct bcma_device *dev)
++{
++ bcma_core_enable(dev, 0);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define bcma_hcd_suspend NULL
++#define bcma_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORETABLE_END
++};
++MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
++
++static struct bcma_driver bcma_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = bcma_hcd_table,
++ .probe = bcma_hcd_probe,
++ .remove = __devexit_p(bcma_hcd_remove),
++ .shutdown = bcma_hcd_shutdown,
++ .suspend = bcma_hcd_suspend,
++ .resume = bcma_hcd_resume,
++};
++
++static int __init bcma_hcd_init(void)
++{
++ return bcma_driver_register(&bcma_hcd_driver);
++}
++module_init(bcma_hcd_init);
++
++static void __exit bcma_hcd_exit(void)
++{
++ bcma_driver_unregister(&bcma_hcd_driver);
++}
++module_exit(bcma_hcd_exit);
--- /dev/null
+From 1840ddf07a452e640549fbd82e2f570da28e377f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:35:17 +0100
+Subject: [PATCH 185/186] USB: Add driver for the ssb bus
+
+This adds a USB driver using the generic platform device driver for the
+USB controller found on the Broadcom ssb bus. The ssb bus just
+exposes one device which serves the OHCI and the EHCI controller at the
+same time. This driver probes for this USB controller and creates and
+registers two new platform devices which will be probed by the new
+generic platform device driver. This makes it possible to use the EHCI
+and the OCHI controller on the ssb bus at the same time.
+
+The old ssb OHCI USB driver will be removed in the next step as this
+driver also provide an OHCI driver and an EHCI for the cores supporting
+it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 12 ++
+ drivers/usb/host/Makefile | 1 +
+ drivers/usb/host/ssb-hcd.c | 273 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 286 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/host/ssb-hcd.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -630,3 +630,15 @@ config USB_HCD_BCMA
+ for ehci and ohci.
+
+ If unsure, say N.
++
++config USB_HCD_SSB
++ tristate "SSB usb host driver"
++ depends on SSB && EXPERIMENTAL
++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
++ help
++ Enbale support for the EHCI and OCHI host controller on an bcma bus.
++ It converts the bcma driver into two platform device drivers
++ for ehci and ohci.
++
++ If unsure, say N.
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-m
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
+ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
++obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
+--- /dev/null
++++ b/drivers/usb/host/ssb-hcd.c
+@@ -0,0 +1,273 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom USB-core driver (SSB bus glue)
++ *
++ * Copyright 2011 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on ssb-ohci driver
++ * Copyright 2007 Michael Buesch <m@bues.ch>
++ *
++ * Derived from the OHCI-PCI driver
++ * Copyright 1999 Roman Weissgaerber
++ * Copyright 2000-2002 David Brownell
++ * Copyright 1999 Linus Torvalds
++ * Copyright 1999 Gregory P. Smith
++ *
++ * Derived from the USBcore related parts of Broadcom-SB
++ * Copyright 2005-2011 Broadcom Corporation
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++#include <linux/ssb/ssb.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++#include <linux/usb/hci_driver.h>
++
++MODULE_AUTHOR("Hauke Mehrtens");
++MODULE_DESCRIPTION("Common USB driver for SSB Bus");
++MODULE_LICENSE("GPL");
++
++#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29)
++
++struct ssb_hcd_device {
++ struct platform_device *ehci_dev;
++ struct platform_device *ohci_dev;
++
++ u32 enable_flags;
++};
++
++static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
++{
++#ifdef CONFIG_SSB_DRIVER_MIPS
++ /* Work around for 5354 failures */
++ if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
++ /* Change syn01 reg */
++ ssb_write32(dev, 0x894, 0x00fe00fe);
++
++ /* Change syn03 reg */
++ ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
++ }
++#endif
++}
++
++static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
++{
++ if (dev->id.coreid == SSB_DEV_USB20_HOST) {
++ /*
++ * USB 2.0 special considerations:
++ *
++ * In addition to the standard SSB reset sequence, the Host
++ * Control Register must be programmed to bring the USB core
++ * and various phy components out of reset.
++ */
++ ssb_write32(dev, 0x200, 0x7ff);
++
++ /* Change Flush control reg */
++ ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
++ ssb_read32(dev, 0x400);
++
++ /* Change Shim control reg */
++ ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
++ ssb_read32(dev, 0x304);
++
++ udelay(1);
++
++ ssb_hcd_5354wa(dev);
++ }
++}
++
++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
++static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
++{
++ u32 flags = 0;
++
++ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
++ /* Put the device into host-mode. */
++ flags |= SSB_HCD_TMSLOW_HOSTMODE;
++
++ ssb_device_enable(dev, flags);
++
++ ssb_hcd_usb20wa(dev);
++
++ return flags;
++}
++
++static const struct usb_hci_pdata p_data = {
++ .flags = USB_HCI_PDATA_PORT_POWER_SET,
++ .power_set_is_on = 1,
++};
++
++static struct platform_device * __devinit
++ssb_hcd_create_pdev(struct ssb_device *dev, char *name, u32 addr, u32 len)
++{
++ struct platform_device *hci_dev;
++ struct resource hci_res[2];
++ int ret = -ENOMEM;
++
++ memset(hci_res, 0, sizeof(hci_res));
++
++ hci_res[0].start = addr;
++ hci_res[0].end = hci_res[0].start + len - 1;
++ hci_res[0].flags = IORESOURCE_MEM;
++
++ hci_res[1].start = dev->irq;
++ hci_res[1].flags = IORESOURCE_IRQ;
++
++ hci_dev = platform_device_alloc(name, 0);
++ if (!hci_dev)
++ return NULL;
++
++ hci_dev->dev.parent = dev->dev;
++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
++
++ ret = platform_device_add_resources(hci_dev, hci_res,
++ ARRAY_SIZE(hci_res));
++ if (ret)
++ goto err_alloc;
++ ret = platform_device_add_data(hci_dev, &p_data, sizeof(p_data));
++ if (ret)
++ goto err_alloc;
++ ret = platform_device_add(hci_dev);
++ if (ret)
++ goto err_alloc;
++
++ return hci_dev;
++
++err_alloc:
++ platform_device_put(hci_dev);
++ return ERR_PTR(ret);
++}
++
++static int __devinit ssb_hcd_probe(struct ssb_device *dev,
++ const struct ssb_device_id *id)
++{
++ int err, tmp;
++ int start, len;
++ u16 chipid_top;
++ u16 coreid = dev->id.coreid;
++ struct ssb_hcd_device *usb_dev;
++
++ /* USBcores are only connected on embedded devices. */
++ chipid_top = (dev->bus->chip_id & 0xFF00);
++ if (chipid_top != 0x4700 && chipid_top != 0x5300)
++ return -ENODEV;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
++ return -EOPNOTSUPP;
++
++ usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++
++ /* We currently always attach SSB_DEV_USB11_HOSTDEV
++ * as HOST OHCI. If we want to attach it as Client device,
++ * we must branch here and call into the (yet to
++ * be written) Client mode driver. Same for remove(). */
++ usb_dev->enable_flags = ssb_hcd_init_chip(dev);
++
++ tmp = ssb_read32(dev, SSB_ADMATCH0);
++
++ start = ssb_admatch_base(tmp);
++ len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
++ usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, "ohci-platform", start,
++ len);
++ if (IS_ERR(usb_dev->ohci_dev)) {
++ err = PTR_ERR(usb_dev->ohci_dev);
++ goto err_free_usb_dev;
++ }
++
++ if (coreid == SSB_DEV_USB20_HOST) {
++ start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
++ usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, "ehci-platform",
++ start, len);
++ if (IS_ERR(usb_dev->ehci_dev)) {
++ err = PTR_ERR(usb_dev->ehci_dev);
++ goto err_unregister_ohci_dev;
++ }
++ }
++
++ ssb_set_drvdata(dev, usb_dev);
++ return 0;
++
++err_unregister_ohci_dev:
++ platform_device_unregister(usb_dev->ohci_dev);
++err_free_usb_dev:
++ kfree(usb_dev);
++ return err;
++}
++
++static void __devexit ssb_hcd_remove(struct ssb_device *dev)
++{
++ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
++ struct platform_device *ohci_dev = usb_dev->ohci_dev;
++ struct platform_device *ehci_dev = usb_dev->ehci_dev;
++
++ if (ohci_dev)
++ platform_device_unregister(ohci_dev);
++ if (ehci_dev)
++ platform_device_unregister(ehci_dev);
++
++ ssb_device_disable(dev, 0);
++}
++
++static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
++{
++ ssb_device_disable(dev, 0);
++}
++
++#ifdef CONFIG_PM
++
++static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
++{
++ ssb_device_disable(dev, 0);
++
++ return 0;
++}
++
++static int ssb_hcd_resume(struct ssb_device *dev)
++{
++ struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
++
++ ssb_device_enable(dev, usb_dev->enable_flags);
++
++ return 0;
++}
++
++#else /* !CONFIG_PM */
++#define ssb_hcd_suspend NULL
++#define ssb_hcd_resume NULL
++#endif /* CONFIG_PM */
++
++static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
++ SSB_DEVTABLE_END
++};
++MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
++
++static struct ssb_driver ssb_hcd_driver = {
++ .name = KBUILD_MODNAME,
++ .id_table = ssb_hcd_table,
++ .probe = ssb_hcd_probe,
++ .remove = __devexit_p(ssb_hcd_remove),
++ .shutdown = ssb_hcd_shutdown,
++ .suspend = ssb_hcd_suspend,
++ .resume = ssb_hcd_resume,
++};
++
++static int __init ssb_hcd_init(void)
++{
++ return ssb_driver_register(&ssb_hcd_driver);
++}
++module_init(ssb_hcd_init);
++
++static void __exit ssb_hcd_exit(void)
++{
++ ssb_driver_unregister(&ssb_hcd_driver);
++}
++module_exit(ssb_hcd_exit);
--- /dev/null
+From 57857d7df6c22eaf11e3c67042d55a9546415059 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 26 Nov 2011 21:36:50 +0100
+Subject: [PATCH 186/186] USB: OHCI: remove old SSB OHCI driver
+
+This is now replaced by the new ssb USB driver, which also supports
+devices with an EHCI controller.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/Kconfig | 13 --
+ drivers/usb/host/ohci-hcd.c | 21 +----
+ drivers/usb/host/ohci-ssb.c | 260 -------------------------------------------
+ 3 files changed, 1 insertions(+), 293 deletions(-)
+ delete mode 100644 drivers/usb/host/ohci-ssb.c
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -351,19 +351,6 @@ config USB_OHCI_HCD_PCI
+ Enables support for PCI-bus plug-in USB controller cards.
+ If unsure, say Y.
+
+-config USB_OHCI_HCD_SSB
+- bool "OHCI support for Broadcom SSB OHCI core"
+- depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+- default n
+- ---help---
+- Support for the Sonics Silicon Backplane (SSB) attached
+- Broadcom USB OHCI core.
+-
+- This device is present in some embedded devices with
+- Broadcom based SSB bus.
+-
+- If unsure, say N.
+-
+ config USB_OHCI_SH
+ bool "OHCI support for SuperH USB controller"
+ depends on USB_OHCI_HCD && SUPERH
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1076,11 +1076,6 @@ MODULE_LICENSE ("GPL");
+ #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver
+ #endif
+
+-#ifdef CONFIG_USB_OHCI_HCD_SSB
+-#include "ohci-ssb.c"
+-#define SSB_OHCI_DRIVER ssb_ohci_driver
+-#endif
+-
+ #ifdef CONFIG_MFD_SM501
+ #include "ohci-sm501.c"
+ #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
+@@ -1129,8 +1124,7 @@ MODULE_LICENSE ("GPL");
+ !defined(SA1111_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
+- !defined(TMIO_OHCI_DRIVER) && \
+- !defined(SSB_OHCI_DRIVER)
++ !defined(TMIO_OHCI_DRIVER)
+ #error "missing bus glue for ohci-hcd"
+ #endif
+
+@@ -1196,12 +1190,6 @@ static int __init ohci_hcd_mod_init(void
+ goto error_pci;
+ #endif
+
+-#ifdef SSB_OHCI_DRIVER
+- retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+- if (retval)
+- goto error_ssb;
+-#endif
+-
+ #ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+@@ -1225,10 +1213,6 @@ static int __init ohci_hcd_mod_init(void
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ error_sm501:
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+- error_ssb:
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ error_pci:
+@@ -1276,9 +1260,6 @@ static void __exit ohci_hcd_mod_exit(voi
+ #ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+ #endif
+-#ifdef SSB_OHCI_DRIVER
+- ssb_driver_unregister(&SSB_OHCI_DRIVER);
+-#endif
+ #ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+ #endif
+--- a/drivers/usb/host/ohci-ssb.c
++++ /dev/null
+@@ -1,260 +0,0 @@
+-/*
+- * Sonics Silicon Backplane
+- * Broadcom USB-core OHCI driver
+- *
+- * Copyright 2007 Michael Buesch <m@bues.ch>
+- *
+- * Derived from the OHCI-PCI driver
+- * Copyright 1999 Roman Weissgaerber
+- * Copyright 2000-2002 David Brownell
+- * Copyright 1999 Linus Torvalds
+- * Copyright 1999 Gregory P. Smith
+- *
+- * Derived from the USBcore related parts of Broadcom-SB
+- * Copyright 2005 Broadcom Corporation
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+- */
+-#include <linux/ssb/ssb.h>
+-
+-
+-#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29)
+-
+-struct ssb_ohci_device {
+- struct ohci_hcd ohci; /* _must_ be at the beginning. */
+-
+- u32 enable_flags;
+-};
+-
+-static inline
+-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
+-{
+- return (struct ssb_ohci_device *)(hcd->hcd_priv);
+-}
+-
+-
+-static int ssb_ohci_reset(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- ohci_hcd_init(ohci);
+- err = ohci_init(ohci);
+-
+- return err;
+-}
+-
+-static int ssb_ohci_start(struct usb_hcd *hcd)
+-{
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+- struct ohci_hcd *ohci = &ohcidev->ohci;
+- int err;
+-
+- err = ohci_run(ohci);
+- if (err < 0) {
+- ohci_err(ohci, "can't start\n");
+- ohci_stop(hcd);
+- }
+-
+- return err;
+-}
+-
+-static const struct hc_driver ssb_ohci_hc_driver = {
+- .description = "ssb-usb-ohci",
+- .product_desc = "SSB OHCI Controller",
+- .hcd_priv_size = sizeof(struct ssb_ohci_device),
+-
+- .irq = ohci_irq,
+- .flags = HCD_MEMORY | HCD_USB11,
+-
+- .reset = ssb_ohci_reset,
+- .start = ssb_ohci_start,
+- .stop = ohci_stop,
+- .shutdown = ohci_shutdown,
+-
+- .urb_enqueue = ohci_urb_enqueue,
+- .urb_dequeue = ohci_urb_dequeue,
+- .endpoint_disable = ohci_endpoint_disable,
+-
+- .get_frame_number = ohci_get_frame,
+-
+- .hub_status_data = ohci_hub_status_data,
+- .hub_control = ohci_hub_control,
+-#ifdef CONFIG_PM
+- .bus_suspend = ohci_bus_suspend,
+- .bus_resume = ohci_bus_resume,
+-#endif
+-
+- .start_port_reset = ohci_start_port_reset,
+-};
+-
+-static void ssb_ohci_detach(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+-
+- if (hcd->driver->shutdown)
+- hcd->driver->shutdown(hcd);
+- usb_remove_hcd(hcd);
+- iounmap(hcd->regs);
+- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+- usb_put_hcd(hcd);
+- ssb_device_disable(dev, 0);
+-}
+-
+-static int ssb_ohci_attach(struct ssb_device *dev)
+-{
+- struct ssb_ohci_device *ohcidev;
+- struct usb_hcd *hcd;
+- int err = -ENOMEM;
+- u32 tmp, flags = 0;
+-
+- if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+- dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+- return -EOPNOTSUPP;
+-
+- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
+- /* Put the device into host-mode. */
+- flags |= SSB_OHCI_TMSLOW_HOSTMODE;
+- ssb_device_enable(dev, flags);
+- } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+- /*
+- * USB 2.0 special considerations:
+- *
+- * In addition to the standard SSB reset sequence, the Host
+- * Control Register must be programmed to bring the USB core
+- * and various phy components out of reset.
+- */
+- ssb_device_enable(dev, 0);
+- ssb_write32(dev, 0x200, 0x7ff);
+-
+- /* Change Flush control reg */
+- tmp = ssb_read32(dev, 0x400);
+- tmp &= ~8;
+- ssb_write32(dev, 0x400, tmp);
+- tmp = ssb_read32(dev, 0x400);
+-
+- /* Change Shim control reg */
+- tmp = ssb_read32(dev, 0x304);
+- tmp &= ~0x100;
+- ssb_write32(dev, 0x304, tmp);
+- tmp = ssb_read32(dev, 0x304);
+-
+- udelay(1);
+-
+- /* Work around for 5354 failures */
+- if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+- /* Change syn01 reg */
+- tmp = 0x00fe00fe;
+- ssb_write32(dev, 0x894, tmp);
+-
+- /* Change syn03 reg */
+- tmp = ssb_read32(dev, 0x89c);
+- tmp |= 0x1;
+- ssb_write32(dev, 0x89c, tmp);
+- }
+- } else
+- ssb_device_enable(dev, 0);
+-
+- hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
+- dev_name(dev->dev));
+- if (!hcd)
+- goto err_dev_disable;
+- ohcidev = hcd_to_ssb_ohci(hcd);
+- ohcidev->enable_flags = flags;
+-
+- tmp = ssb_read32(dev, SSB_ADMATCH0);
+- hcd->rsrc_start = ssb_admatch_base(tmp);
+- hcd->rsrc_len = ssb_admatch_size(tmp);
+- hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+- if (!hcd->regs)
+- goto err_put_hcd;
+- err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+- if (err)
+- goto err_iounmap;
+-
+- ssb_set_drvdata(dev, hcd);
+-
+- return err;
+-
+-err_iounmap:
+- iounmap(hcd->regs);
+-err_put_hcd:
+- usb_put_hcd(hcd);
+-err_dev_disable:
+- ssb_device_disable(dev, flags);
+- return err;
+-}
+-
+-static int ssb_ohci_probe(struct ssb_device *dev,
+- const struct ssb_device_id *id)
+-{
+- int err;
+- u16 chipid_top;
+-
+- /* USBcores are only connected on embedded devices. */
+- chipid_top = (dev->bus->chip_id & 0xFF00);
+- if (chipid_top != 0x4700 && chipid_top != 0x5300)
+- return -ENODEV;
+-
+- /* TODO: Probably need checks here; is the core connected? */
+-
+- if (usb_disabled())
+- return -ENODEV;
+-
+- /* We currently always attach SSB_DEV_USB11_HOSTDEV
+- * as HOST OHCI. If we want to attach it as Client device,
+- * we must branch here and call into the (yet to
+- * be written) Client mode driver. Same for remove(). */
+-
+- err = ssb_ohci_attach(dev);
+-
+- return err;
+-}
+-
+-static void ssb_ohci_remove(struct ssb_device *dev)
+-{
+- ssb_ohci_detach(dev);
+-}
+-
+-#ifdef CONFIG_PM
+-
+-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
+-{
+- ssb_device_disable(dev, 0);
+-
+- return 0;
+-}
+-
+-static int ssb_ohci_resume(struct ssb_device *dev)
+-{
+- struct usb_hcd *hcd = ssb_get_drvdata(dev);
+- struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
+-
+- ssb_device_enable(dev, ohcidev->enable_flags);
+-
+- ohci_finish_controller_resume(hcd);
+- return 0;
+-}
+-
+-#else /* !CONFIG_PM */
+-#define ssb_ohci_suspend NULL
+-#define ssb_ohci_resume NULL
+-#endif /* CONFIG_PM */
+-
+-static const struct ssb_device_id ssb_ohci_table[] = {
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+- SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+- SSB_DEVTABLE_END
+-};
+-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
+-
+-static struct ssb_driver ssb_ohci_driver = {
+- .name = KBUILD_MODNAME,
+- .id_table = ssb_ohci_table,
+- .probe = ssb_ohci_probe,
+- .remove = ssb_ohci_remove,
+- .suspend = ssb_ohci_suspend,
+- .resume = ssb_ohci_resume,
+-};
projects / openwrt / svn-archive / archive.git / commitdiff