comgt: add ncm proto support
authorJohn Crispin <john@openwrt.org>
Fri, 10 Oct 2014 08:56:33 +0000 (08:56 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 10 Oct 2014 08:56:33 +0000 (08:56 +0000)
This will not work for all board/dongle combinations until we hit 3.17.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 42866

package/network/utils/comgt/Makefile
package/network/utils/comgt/files/3g.usb
package/network/utils/comgt/files/ncm.json [new file with mode: 0644]
package/network/utils/comgt/files/ncm.sh [new file with mode: 0644]
package/network/utils/comgt/files/runcommand.gcom [new file with mode: 0644]

index 11a1a49139184eb18ea00d567b58d3da5e461d5c..5fccd947e660fa82f639627d1e63f84aa640d480 100644 (file)
@@ -40,6 +40,12 @@ $(call Package/comgt/Default)
   DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-sierrawireless +kmod-usb-net +kmod-usb-net-sierrawireless
 endef
 
+define Package/comgt-ncm
+$(call Package/comgt/Default)
+  TITLE+=NCM 3G/4G Support
+  DEPENDS:=+comgt +kmod-usb-serial +kmod-usb-serial-option +kmod-usb-net +kmod-usb-net-cdc-ncm +kmod-usb-net-huawei-cdc-ncm
+endef
+
 define Package/comgt/description
  comgt is a scripting language interpreter useful for establishing 
  communications on serial lines and through PCMCIA modems as well as GPRS 
@@ -86,5 +92,14 @@ define Package/comgt-directip/install
        $(INSTALL_BIN) ./files/directip.sh $(1)/lib/netifd/proto/directip.sh
 endef
 
+define Package/comgt-ncm/install
+       $(INSTALL_DIR) $(1)/etc/gcom
+       $(INSTALL_DATA) ./files/ncm.json $(1)/etc/gcom/ncm.json
+       $(INSTALL_DATA) ./files/runcommand.gcom $(1)/etc/gcom/runcommand.gcom
+       $(INSTALL_DIR) $(1)/lib/netifd/proto
+       $(INSTALL_BIN) ./files/ncm.sh $(1)/lib/netifd/proto/ncm.sh
+endef
+
 $(eval $(call BuildPackage,comgt))
 $(eval $(call BuildPackage,comgt-directip))
+$(eval $(call BuildPackage,comgt-ncm))
index fd6837e650345de94c41a189a234fbc036d98c78..ac8326b710cfd51170acd7602e7418cf8269d682 100644 (file)
@@ -8,7 +8,7 @@ find_3g_iface() {
 
        local proto
        config_get proto "$cfg" proto
-       [ "$proto" = 3g ] || return 0
+       [ "$proto" = 3g ] || [ "$proto" = ncm ] || return 0
 
        # bypass state vars here because 00-netstate could clobber .device
        local dev=$(uci_get network "$cfg" device)
diff --git a/package/network/utils/comgt/files/ncm.json b/package/network/utils/comgt/files/ncm.json
new file mode 100644 (file)
index 0000000..b9b15cd
--- /dev/null
@@ -0,0 +1,49 @@
+{
+       "huawei": {
+               "initialize": [
+                       "AT",
+                       "ATZ",
+                       "ATQ0",
+                       "ATV1",
+                       "ATE1",
+                       "ATS0=0"
+               ],
+               "modes": {
+                       "preferlte": "AT^SYSCFGEX=\\\"030201\\\",3fffffff,2,4,7fffffffffffffff,,",
+                       "preferumts": "AT^SYSCFGEX=\\\"0201\\\",3fffffff,2,4,7fffffffffffffff,,",
+                       "lte": "AT^SYSCFGEX=\\\"03\\\",3fffffff,2,4,7fffffffffffffff,,",
+                       "umts": "AT^SYSCFGEX=\\\"02\\\",3fffffff,2,4,7fffffffffffffff,,",
+                       "gsm": "AT^SYSCFGEX=\\\"01\\\",3fffffff,2,4,7fffffffffffffff,,",
+                       "auto": "AT^SYSCFGEX=\\\"00\\\",3fffffff,2,4,7fffffffffffffff,,"
+               },
+               "connect": "AT^NDISDUP=1,1,\\\"${apn}\\\"${username:+,\\\"$username\\\"}${password:+,\\\"$password\\\"}${auth:+,$auth}",
+               "disconnect": "AT^NDISDUP=1,0"
+       },
+       "SAMSUNG": {
+               "initialize": [
+                       "AT",
+                       "AT+CGREG=2",
+                       "AT+CFUN=5",
+                       "AT+MODESELECT=3",
+                       "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\""
+               ],
+               "modes": {
+                       "umts": "AT+CHANGEALLPATH=1"
+               },
+               "connect": "AT+CGATT=1",
+               "disconnect": "AT+CGATT=0"
+       },
+       "Sony": {
+               "initialize": [
+                       "AT+CFUN=1",
+                       "AT+CGDCONT=1,\\\"IP\\\",\\\"${apn}\\\"",
+                       "AT*EIAAUW=1,1,\\\"${username}\\\",\\\"${password}\\\",${auth:-00111}"
+               ],
+               "modes": {
+                       "umts": "AT+CFUN=6",
+                       "gsm": "AT+CFUN=5"
+               },
+               "connect": "AT*ENAP=1,1",
+               "disconnect": "AT*ENAP=0"
+       }
+}
diff --git a/package/network/utils/comgt/files/ncm.sh b/package/network/utils/comgt/files/ncm.sh
new file mode 100644 (file)
index 0000000..14e421f
--- /dev/null
@@ -0,0 +1,156 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_ncm_init_config() {
+       no_device=1
+       available=1
+       proto_config_add_string "device:device"
+       proto_config_add_string apn
+       proto_config_add_string auth
+       proto_config_add_string username
+       proto_config_add_string password
+       proto_config_add_string pincode
+       proto_config_add_string delay
+       proto_config_add_string mode
+}
+
+proto_ncm_setup() {
+       local interface="$1"
+
+       local manufacturer initialize setmode connect
+
+       local device apn auth username password pincode delay mode
+       json_get_vars device apn auth username password pincode delay mode
+
+       [ -n "$device" ] || {
+               echo "ncm[$$]" "No control device specified"
+               proto_notify_error "$interface" NO_DEVICE
+               proto_set_available "$interface" 0
+               return 1
+       }
+       [ -e "$device" ] || {
+               echo "ncm[$$]" "Control device not valid"
+               proto_set_available "$interface" 0
+               return 1
+       }
+       [ -n "$apn" ] || {
+               echo "ncm[$$]" "No APN specified"
+               proto_notify_error "$interface" NO_APN
+               proto_set_available "$interface" 0
+               return 1
+       }
+
+       [ -n "$delay" ] && sleep "$delay"
+
+       manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+       [ $? -ne 0 ] && {
+               echo "ncm[$$]" "Failed to get modem information"
+               proto_notify_error "$interface" GETINFO_FAILED
+               proto_set_available "$interface" 0
+               return 1
+       }
+
+       json_load "$(cat /etc/gcom/ncm.json)"
+       json_select "$manufacturer"
+       [ $? -ne 0 ] && {
+               echo "ncm[$$]" "Unsupported modem"
+               proto_notify_error "$interface" UNSUPPORTED_MODEM
+               proto_set_available "$interface" 0
+               return 1
+       }
+       json_get_values initialize initialize
+       for i in $initialize; do
+               eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+                       echo "ncm[$$]" "Failed to initialize modem"
+                       proto_notify_error "$interface" INITIALIZE_FAILED
+                       proto_set_available "$interface" 0
+                       return 1
+               }
+       done
+
+       [ -n "$pincode" ] && {
+               PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+                       echo "ncm[$$]" "Unable to verify PIN"
+                       proto_notify_error "$interface" PIN_FAILED
+                       proto_block_restart "$interface"
+                       return 1
+               }
+       }
+       [ -n "$mode" ] && {
+               json_select modes
+               json_get_var setmode "$mode"
+               COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+                       echo "ncm[$$]" "Failed to set operating mode"
+                       proto_notify_error "$interface" SETMODE_FAILED
+                       proto_set_available "$interface" 0
+                       return 1
+               }
+               json_select ..
+       }
+
+       json_get_var connect connect
+       eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+               echo "ncm[$$]" "Failed to connect"
+               proto_notify_error "$interface" CONNECT_FAILED
+               proto_set_available "$interface" 0
+               return 1
+       }
+
+       echo "ncm[$$]" "Connected, starting DHCP"
+       proto_init_update "*" 1
+       proto_send_update "$interface"
+
+       json_init
+       json_add_string name "${interface}_dhcp"
+       json_add_string ifname "@$interface"
+       json_add_string proto "dhcp"
+       json_close_object
+       ubus call network add_dynamic "$(json_dump)"
+
+       json_init
+       json_add_string name "${interface}_dhcpv6"
+       json_add_string ifname "@$interface"
+       json_add_string proto "dhcpv6"
+       json_close_object
+       ubus call network add_dynamic "$(json_dump)"
+}
+
+proto_ncm_teardown() {
+       local interface="$1"
+
+       proto_init_update "*" 0
+       proto_send_update "$interface"
+
+       local manufacturer disconnect
+
+       local device 
+       json_get_vars device
+
+       echo "ncm[$$]" "Stopping network"
+
+       manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk '/Manufacturer/ { print $2 }'`
+       [ $? -ne 0 ] && {
+               echo "ncm[$$]" "Failed to get modem information"
+               proto_notify_error "$interface" GETINFO_FAILED
+               return 1
+       }
+
+       json_load "$(cat /etc/gcom/ncm.json)"
+       json_select "$manufacturer" || {
+               echo "ncm[$$]" "Unsupported modem"
+               proto_notify_error "$interface" UNSUPPORTED_MODEM
+               return 1
+       }
+
+       json_get_var disconnect disconnect
+       COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
+               echo "ncm[$$]" "Failed to disconnect"
+               proto_notify_error "$interface" DISCONNECT_FAILED
+               return 1
+       }
+}
+
+add_protocol ncm
diff --git a/package/network/utils/comgt/files/runcommand.gcom b/package/network/utils/comgt/files/runcommand.gcom
new file mode 100644 (file)
index 0000000..6ba061f
--- /dev/null
@@ -0,0 +1,26 @@
+# run AT-command from environment
+opengt
+ set com 115200n81
+ set senddelay 0.02
+ waitquiet 1 0.2
+ flash 0.1
+
+:start
+ send "sending -> "
+ send $env("COMMAND")
+ send "^n"
+
+ waitfor 15 "OK","ERR","ERROR"
+ if % = 0 goto continue
+ if % = 1 goto error
+ if % = 2 goto error
+
+ print "Timeout running AT-command\n"
+ exit 1
+
+:error
+ print "Error running AT-command\n"
+ exit 1
+
+:continue
+ exit 0