ar71xx: add support for the devolo dLAN pro 500 Wireless+
authorJohn Crispin <john@openwrt.org>
Tue, 14 Jul 2015 07:32:33 +0000 (07:32 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 14 Jul 2015 07:32:33 +0000 (07:32 +0000)
Signed-off-by: G√ľnther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46338

target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.18
target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/devolo-dlan.mk [new file with mode: 0644]
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch

index ce2b9ba..cb5d963 100644 (file)
@@ -75,6 +75,9 @@ get_status_led() {
        dir-835-a1)
                status_led="d-link:amber:power"
                ;;
+       dlan-pro-500-wp)
+               status_led="devolo:green:wlan-2g"
+               ;;
        dragino2)
                status_led="dragino2:red:system"
                ;;
index a361b77..cf5c735 100644 (file)
@@ -173,6 +173,13 @@ dir-825-c1)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
        ;;
 
+dlan-pro-500-wp)
+       ucidef_set_led_default "power" "System Power" "devolo:green:status" "1"
+       ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan"
+       ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
+       ;;
+
 gl-inet)
        ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
        ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
index ec709a0..615dbc4 100755 (executable)
@@ -301,6 +301,10 @@ esr900)
        [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
        ;;
 
+dlan-pro-500-wp)
+       ucidef_set_interface_lan "eth0 eth1"
+       ;;
+
 all0305 |\
 aw-nr580 |\
 bullet-m |\
index dd13948..f323ec3 100755 (executable)
@@ -423,6 +423,9 @@ ar71xx_board_detect() {
        *"DIR-835 rev. A1")
                name="dir-835-a1"
                ;;
+       *"dLAN pro 500 Wireless+")
+               name="dlan-pro-500-wp"
+               ;;
        *"Dragino v2")
                name="dragino2"
                ;;
index 73d8b0d..8b27b6d 100755 (executable)
@@ -208,6 +208,7 @@ platform_check_image() {
        dir-615-i1 | \
        dir-825-c1 | \
        dir-835-a1 | \
+       dlan-pro-500-wp | \
        dragino2 | \
        epg5000 | \
        esr1750 | \
index 02857d5..353c10a 100644 (file)
@@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_DIR_615_C1=y
 CONFIG_ATH79_MACH_DIR_615_I1=y
 CONFIG_ATH79_MACH_DIR_825_B1=y
 CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
 CONFIG_ATH79_MACH_DRAGINO2=y
 CONFIG_ATH79_MACH_EAP300V2=y
 CONFIG_ATH79_MACH_EAP7660D=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
new file mode 100644 (file)
index 0000000..ae6f443
--- /dev/null
@@ -0,0 +1,203 @@
+/*
+ * devolo dLAN pro 500 Wireless+ support
+ *
+ * Copyright (c) 2013-2015 devolo AG
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE         13
+#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE           17
+#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G               11
+#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G               12
+#define DLAN_PRO_500_WP_GPIO_LED_STATUS                        16
+#define DLAN_PRO_500_WP_GPIO_LED_ETH                   14
+
+#define DLAN_PRO_500_WP_GPIO_BTN_WPS                   20
+#define DLAN_PRO_500_WP_GPIO_BTN_WLAN                  22
+#define DLAN_PRO_500_WP_GPIO_BTN_DLAN                  21
+#define DLAN_PRO_500_WP_GPIO_BTN_RESET                 4
+
+#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL             20      /* msecs */
+#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL         (3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL)
+
+#define DLAN_PRO_500_WP_ART_ADDRESS                    0x1fff0000
+#define DLAN_PRO_500_WP_CALDATA_OFFSET                 0x1000
+#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET             0x1002
+#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET            0x5000
+
+static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = {
+       {
+               .name           = "devolo:green:status",
+               .gpio           = DLAN_PRO_500_WP_GPIO_LED_STATUS,
+               .active_low     = 1,
+       },
+       {
+               .name           = "devolo:green:eth",
+               .gpio           = DLAN_PRO_500_WP_GPIO_LED_ETH,
+               .active_low     = 1,
+       },
+       {
+               .name           = "devolo:blue:wlan-5g",
+               .gpio           = DLAN_PRO_500_WP_GPIO_LED_WLAN_5G,
+               .active_low     = 1,
+       },
+       {
+               .name           = "devolo:green:wlan-2g",
+               .gpio           = DLAN_PRO_500_WP_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = {
+       {
+               .desc           = "dLAN button",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DLAN_PRO_500_WP_GPIO_BTN_DLAN,
+               .active_low     = 0,
+       },
+       {
+               .desc           = "WPS button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DLAN_PRO_500_WP_GPIO_BTN_WPS,
+               .active_low     = 0,
+       },
+       {
+               .desc           = "WLAN button",
+               .type           = EV_KEY,
+               .code           = BTN_2,
+               .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DLAN_PRO_500_WP_GPIO_BTN_WLAN,
+               .active_low     = 1,
+       },
+       {
+               .desc           = "Reset button",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DLAN_PRO_500_WP_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = {
+       .mode = AR8327_PAD_PHY_RGMII,
+       .txclk_delay_en = false,
+       .rxclk_delay_en = false,
+       .txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = {
+       .led_ctrl0 = 0x00000000,
+       .led_ctrl1 = 0xc737c737,
+       .led_ctrl2 = 0x00000000,
+       .led_ctrl3 = 0x00c30c00,
+       .open_drain = true,
+};
+
+static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = {
+       .pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 0,
+               .rxpause = 0,
+       },
+       .led_cfg = &dlan_pro_500_wp_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &dlan_pro_500_wp_ar8327_data,
+       },
+};
+
+static void __init dlan_pro_500_wp_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS);
+       u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET;
+       u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET;
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio),
+                                dlan_pro_500_wp_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(dlan_pro_500_wp_gpio_keys),
+                                       dlan_pro_500_wp_gpio_keys);
+
+       gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE,
+                        GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+                        "PLC power");
+       gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE,
+                        GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+                        "PLC LEDs");
+
+       ath79_register_wmac(cal, wifi_mac);
+
+       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+       ath79_register_mdio(1, 0x0);
+       ath79_register_mdio(0, 0x0);
+
+       mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info,
+                                   ARRAY_SIZE(dlan_pro_500_wp_mdio0_info));
+
+       /* GMAC0 is connected to a AR7400 PLC in PHY mode */
+       ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ath79_eth0_pll_data.pll_1000 = 0x0e000000;
+       ath79_eth0_data.speed = SPEED_1000;
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+       ath79_register_eth(0);
+
+       /* GMAC1 is connected to the internal switch */
+       ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1);
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_eth1_data.speed = SPEED_1000;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+",
+            dlan_pro_500_wp_setup);
diff --git a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
new file mode 100644 (file)
index 0000000..281c04c
--- /dev/null
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/dLAN_pro_500_wp
+       NAME:=devolo dLAN pro 500 Wireless+
+       PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \
+               open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-amphost \
+               open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \
+               ebtables hostapd-utils wifitoggle wpad
+endef
+
+define Profile/dLAN_pro_500_wp/Description
+       Package set optimized for the devolo dLAN pro 500 Wireless+.
+endef
+$(eval $(call Profile,dLAN_pro_500_wp))
index 0351310..81e100f 100644 (file)
@@ -1185,6 +1185,7 @@ cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-
 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
 dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
+dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),6528k(rootfs),7680k@0x70000(firmware),64k(art)ro
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
 cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
 esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
@@ -1402,6 +1403,22 @@ Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap12
 Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
 Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
 
+define Image/Build/dLAN
+       $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+       $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
+       $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
+       $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
+       if [ -e "$(call factoryname,$(1),$(2))" ]; then \
+               dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
+                       of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+               dd if=$(KDIR)/root.$(1) \
+                       of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+       fi
+endef
+
+Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
+Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
 
 define Image/Build/Ath
        $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
@@ -2063,6 +2080,8 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS
 $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
 $(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
 
+$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage))
+
 $(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
 $(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
 $(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
index 3f22a37..01d7224 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,193 @@
+@@ -16,22 +16,194 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -39,6 +39,7 @@
 +      ATH79_MACH_DIR_825_B1,          /* D-Link DIR-825 rev. B1 */
 +      ATH79_MACH_DIR_825_C1,          /* D-Link DIR-825 rev. C1 */
 +      ATH79_MACH_DIR_835_A1,          /* D-Link DIR-835 rev. A1 */
++      ATH79_MACH_DLAN_PRO_500_WP,     /* devolo dLAN pro 500 Wireless+ */
 +      ATH79_MACH_DRAGINO2,            /* Dragino Version 2 */
 +      ATH79_MACH_ESR900,              /* EnGenius ESR900 */
 +      ATH79_MACH_EW_DORIN,            /* embedded wireless Dorin Platform */
  config ATH79_MACH_AP121
        bool "Atheros AP121 reference board"
        select SOC_AR933X
-@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121
+@@ -11,62 +75,1018 @@ config ATH79_MACH_AP121
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 +      select ATH79_DEV_USB
 +      select ATH79_DEV_WMAC
 +
++config ATH79_MACH_DLAN_PRO_500_WP
++      bool "devolo dLAN pro 500 Wireless+ support"
++      select SOC_AR934X
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_WMAC
++      select ATH79_DEV_USB
++
 +config ATH79_MACH_DRAGINO2
 +      bool "DRAGINO V2 support"
 +      select SOC_AR933X
  
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1092,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
  endmenu
  
  config SOC_AR71XX
-@@ -124,7 +1224,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1257,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP
        def_bool n
  
  config ATH79_ROUTERBOOT
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
+@@ -38,9 +38,123 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)             += route
  #
  # Machines
  #
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
 +obj-$(CONFIG_ATH79_MACH_CPE510)               += mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)      += mach-dlan-pro-500-wp.o
 +obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)  += mach-dgl-5500-a1.o
 +obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)  += mach-dhp-1565-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o