[ramips] add the dts files that describe the boards in future

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168

diff --git a/target/linux/ramips/dts/3G-6200N.dts b/target/linux/ramips/dts/3G-6200N.dts
new file mode 100644 (file)
index 0000000..1ea430d
--- /dev/null
+++ b/target/linux/ramips/dts/3G-6200N.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "3G-6200N", "ralink,rt3050-soc";
+       model = "Edimax 3g-6200n";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "edimax:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               wlan {
+                       label = "edimax:amber:wlan";
+                       gpios = <&gpio0 14 1>;
+               };
+               3g {
+                       label = "edimax:blue:3g";
+                       gpios = <&gpio0 7 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x211>;
+               };
+               wlanswitch {
+                       label = "wlanswitch";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0x100>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts
new file mode 100644 (file)
index 0000000..59f0582
--- /dev/null
+++ b/target/linux/ramips/dts/3G300M.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "3G300M", "ralink,rt3052-soc";
+       model = "Tenda 3G300M";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+                       ralink,gpiommux = "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3grouter {
+                       label = "tenda:blue:3grouter";
+                       gpios = <&gpio0 11 1>;
+               };
+               ap {
+                       label = "tenda:blue:ap";
+                       gpios = <&gpio0 12 1>;
+               };
+               wisprouter {
+                       label = "tenda:blue:wisprouter";
+                       gpios = <&gpio0 9 1>;
+               };
+               wirelessrouter {
+                       label = "tenda:blue:wirelessrouter";
+                       gpios = <&gpio0 13 1>;
+               };
+               3g {
+                       label = "tenda:blue:3g";
+                       gpios = <&gpio0 7 1>;
+               };
+               wpsreset {
+                       label = "tenda:blue:wpsreset";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+               mode {
+                       label = "mode";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x100>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/AIR3GII.dts b/target/linux/ramips/dts/AIR3GII.dts
new file mode 100644 (file)
index 0000000..05717b4
--- /dev/null
+++ b/target/linux/ramips/dts/AIR3GII.dts
@@ -0,0 +1,79 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "AIR3GII", "ralink,rt5350-soc";
+       model = "AirLive Air3GII";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "en25q32b";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "en25q32b";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wlan {
+                       label = "airlive:green:wlan";
+                       gpios = <&gpio0 8 0>;
+               };
+               mobile {
+                       label = "airlive:green:mobile";
+                       gpios = <&gpio0 9 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/ALL0239-3G.dts b/target/linux/ramips/dts/ALL0239-3G.dts
new file mode 100644 (file)
index 0000000..cdc1a9f
--- /dev/null
+++ b/target/linux/ramips/dts/ALL0239-3G.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ALL0239-3G", "ralink,rt3052-soc";
+       model = "Allnet ALL0239-3G";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usb {
+                       label = "hw550-3g:green:usb";
+                       gpios = <&gpio0 8 1>;
+               };
+               3g {
+                       label = "hw550-3g:green:3g";
+                       gpios = <&gpio0 11 1>;
+               };
+               status {
+                       label = "hw550-3g:green:status";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "hw550-3g:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               connect {
+                       label = "connect";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0xda>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/ALL0256N-4M.dts b/target/linux/ramips/dts/ALL0256N-4M.dts
new file mode 100644 (file)
index 0000000..7357bd1
--- /dev/null
+++ b/target/linux/ramips/dts/ALL0256N-4M.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ALL0256N", "ralink,rt3050-soc";
+       model = "Allnet ALL0256N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               rssilow {
+                       label = "all0256n:green:rssilow";
+                       gpios = <&gpio0 14 1>;
+               };
+               rssimed {
+                       label = "all0256n:green:rssimed";
+                       gpios = <&gpio0 12 1>;
+               };
+               rssihigh {
+                       label = "all0256n:green:rssihigh";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/ALL0256N-8M.dts b/target/linux/ramips/dts/ALL0256N-8M.dts
new file mode 100644 (file)
index 0000000..07e1ac0
--- /dev/null
+++ b/target/linux/ramips/dts/ALL0256N-8M.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ALL0256N", "ralink,rt3050-soc";
+       model = "Allnet ALL0256N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               rssilow {
+                       label = "all0256n:green:rssilow";
+                       gpios = <&gpio0 14 1>;
+               };
+               rssimed {
+                       label = "all0256n:green:rssimed";
+                       gpios = <&gpio0 12 1>;
+               };
+               rssihigh {
+                       label = "all0256n:green:rssihigh";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts
new file mode 100644 (file)
index 0000000..82819ff
--- /dev/null
+++ b/target/linux/ramips/dts/ALL5002.dts
@@ -0,0 +1,95 @@
+/dts-v1/;
+
+/include/ "rt3352.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ALL5002", "ralink,rt3352-soc";
+       model = "Allnet ALL5002/ALL5003";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,gpiomux = "i2c";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l25635e";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l25635e";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       i2c-gpio {
+               compatible = "i2c-gpio";
+
+               gpios = <&gpio0 1 0 &gpio0 2 0>;
+               i2c-gpio,delay-us = <10>;
+
+               pcf0: iexp@38 {
+                       #gpio-cells = <2>;
+                       compatible = "inxp,pcf8574a";
+                       reg = <0x38>;
+                       gpio-controller;
+               };
+
+               hwmon@4b {
+                       compatible = "national,lm92";
+                       reg = <0x4b>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               ld1 {
+                       label = "allnet:green:ld1";
+                       gpios = <&pcf0 0 1>;
+               };
+               ld2 {
+                       label = "allnet:green:ld2";
+                       gpios = <&pcf0 1 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/ARGUS_ATP52B.dts b/target/linux/ramips/dts/ARGUS_ATP52B.dts
new file mode 100644 (file)
index 0000000..3fe0e4d
--- /dev/null
+++ b/target/linux/ramips/dts/ARGUS_ATP52B.dts
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ARGUS_ATP52B", "ralink,rt3052-soc";
+       model = "Argus ATP-52B";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config),64k(factory),7808k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               run {
+                       label = "argus-atp52b:green:run";
+                       gpios = <&gpio0 9 1>;
+               };
+               net {
+                       label = "argus-atp52b:amber:net";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts
new file mode 100644 (file)
index 0000000..43d9c02
--- /dev/null
+++ b/target/linux/ramips/dts/BC2.dts
@@ -0,0 +1,79 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "BC2", "ralink,rt3052-soc";
+       model = "NexAira BC2";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
+                       ralink,gpiommux = "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usb {
+                       label = "bc2:blue:usb";
+                       gpios = <&gpio0 20 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 17 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/BR-6425.dts b/target/linux/ramips/dts/BR-6425.dts
new file mode 100644 (file)
index 0000000..5dd9c56
--- /dev/null
+++ b/target/linux/ramips/dts/BR-6425.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "BR-6425", "ralink,rt3052-soc";
+       model = "Edimax BR-6425";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "edimax:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               wlan {
+                       label = "edimax:orange:wlan";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x198>;
+               };
+               rfkill {
+                       label = "RFKILL switch";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0xf7>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/BROADWAY.dts b/target/linux/ramips/dts/BROADWAY.dts
new file mode 100644 (file)
index 0000000..6964cdd
--- /dev/null
+++ b/target/linux/ramips/dts/BROADWAY.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "BROADWAY", "ralink,rt3052-soc";
+       model = "Hauppauge Broadway";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config)ro,64k(factory)ro,7744k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               diskmounted {
+                       label = "red:diskmounted";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps_active {
+                       label = "red:wps_active";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               factory {
+                       label = "Factory Reset button";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/CARAMBOLA.dts b/target/linux/ramips/dts/CARAMBOLA.dts
new file mode 100644 (file)
index 0000000..dc60935
--- /dev/null
+++ b/target/linux/ramips/dts/CARAMBOLA.dts
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "CARAMBOLA", "ralink,rt3050-soc";
+       model = "8devices Carambola";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "sdram", "rgmii";
+                       ralink,gpiommux = "i2c", "spi", "jtag", "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+
+       i2c-gpio {
+               compatible = "i2c-gpio";
+
+               gpios = <&gpio0 1 0 &gpio0 2 0>; 
+               i2c-gpio,delay-us = <10>;
+       };
+};

diff --git a/target/linux/ramips/dts/DAP-1350.dts b/target/linux/ramips/dts/DAP-1350.dts
new file mode 100644 (file)
index 0000000..9be5e2c
--- /dev/null
+++ b/target/linux/ramips/dts/DAP-1350.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DAP-1350", "ralink,rt3052-soc";
+       model = "D-Link DAP-1350";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,7488k@0xb0000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "d-link:blue:power";
+                       gpios = <&gpio0 8 1>;
+               };
+               power2 {
+                       label = "d-link:red:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+               rt {
+                       label = "rt";
+                       gpios = <&gpio0 11 1>;
+                       linux,code = <0x100>;
+               };
+               ap {
+                       label = "ap";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x101>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts
new file mode 100644 (file)
index 0000000..f94e1f5
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-300-B1.dts
@@ -0,0 +1,95 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-300-B1", "ralink,rt3050-soc";
+       model = "D-Link DIR-300 B1";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts
new file mode 100644 (file)
index 0000000..555433f
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-600-B1.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-600-B1", "ralink,rt3050-soc";
+       model = "D-Link DIR-600 B1";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-600-B2.dts b/target/linux/ramips/dts/DIR-600-B2.dts
new file mode 100644 (file)
index 0000000..99c3050
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-600-B2.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-600-B2", "ralink,rt3050-soc";
+       model = "D-Link DIR-600 B2";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-615-D.dts b/target/linux/ramips/dts/DIR-615-D.dts
new file mode 100644 (file)
index 0000000..946db9c
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-615-D.dts
@@ -0,0 +1,95 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-615-D", "ralink,rt3050-soc";
+       model = "D-Link DIR-615 D";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-615-H1.dts b/target/linux/ramips/dts/DIR-615-H1.dts
new file mode 100644 (file)
index 0000000..aef69e9
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-615-H1.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/include/ "rt3352.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-615-H1", "ralink,rt3352-soc";
+       model = "D-Link DIR-615 H1";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 7 0>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 0>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 13 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-620-A1.dts b/target/linux/ramips/dts/DIR-620-A1.dts
new file mode 100644 (file)
index 0000000..5e71328
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-620-A1.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-620-A1", "ralink,rt3050-soc";
+       model = "D-Link DIR-620 A1";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:amber:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               status2 {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wan {
+                       label = "d-link:amber:wan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wan2 {
+                       label = "d-link:green:wan";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "d-link:blue:wps";
+                       gpios = <&gpio0 13 0>;
+               };
+               wps2 {
+                       label = "d-link:amber:wps";
+                       gpios = <&gpio0 11 0>;
+               };
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/DIR-645.dts b/target/linux/ramips/dts/DIR-645.dts
new file mode 100644 (file)
index 0000000..0b87630
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-645.dts
@@ -0,0 +1,144 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "DIR-645", "ralink,rt3883-soc";
+       model = "D-Link DIR-645";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "spi";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               timer@100 {
+                       status = "okay";
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <25000000>;
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+                               partition@30000 {
+                                       label = "uboot-env";
+                                       reg = <0x30000 0x4000>;
+                                       read-only;
+                               };
+                               factory: partition@34000 {
+                                       label = "factory";
+                                       reg = <0x34000 0x4000>;
+                                       read-only;
+                               };
+                               partition@38000 {
+                                       label = "nvram";
+                                       reg = <0x38000 0x8000>;
+                                       read-only;
+                               };
+                               partition@40000 {
+                                       label = "devdata";
+                                       reg = <0x40000 0x10000>;
+                               };
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+
+               mtd-mac-address = <&factory 0x28>;
+               ralink,fixed-link = <1000 1 1 1>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+               ralink,5ghz = <0>;
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       rtl8366b {
+               compatible = "rtl8367b";
+               gpio-sda = <&gpio0 1 0>;
+               gpio-sck = <&gpio0 2 0>;
+               realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 9 0>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 14 0>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               
+               inet {
+                       label = "d-link:green:inet";
+                       gpios = <&gpio0 0 1>;
+               };
+               wps {
+                       label = "d-link:green:wps";
+                       gpios = <&gpio1 2 0>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio1 6 0>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/ESR-9753.dts b/target/linux/ramips/dts/ESR-9753.dts
new file mode 100644 (file)
index 0000000..19891e4
--- /dev/null
+++ b/target/linux/ramips/dts/ESR-9753.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ESR-9753", "ralink,rt3052-soc";
+       model = "Senao / EnGenius ESR-9753";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "esr-9753:orange:power";
+                       gpios = <&gpio0 8 1>;
+               };
+               wps {
+                       label = "esr-9753:orange:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/F5D8235_V2.dts b/target/linux/ramips/dts/F5D8235_V2.dts
new file mode 100644 (file)
index 0000000..e99b3b6
--- /dev/null
+++ b/target/linux/ramips/dts/F5D8235_V2.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "F5D8235_V2", "ralink,rt3052-soc";
+       model = "Belkin F5D8235 v2";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:320k(u-boot)ro,7744k(firmware),64k(nvram),64k(factory)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "i2c", "spi", "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+
+       rtl8366rb {
+               compatible = "rtl8367rb";
+               gpio-sda = <&gpio0 1 0>;
+               gpio-sck = <&gpio0 2 0>;
+       };
+       
+       gpio-leds {
+               compatible = "gpio-leds";
+               internet {
+                       label = "f5d8235v2:blue:internet";
+                       gpio = <&gpio0 5 1>;
+               };
+               internet2 {
+                       label = "f5d8235v2:amber:internet";
+                       gpio = <&gpio0 6 1>;
+               };
+               modem {
+                       label = "f5d8235v2:blue:modem";
+                       gpio = <&gpio0 11 1>;
+               };
+               modem2 {
+                       label = "f5d8235v2:amber:modem";
+                       gpio = <&gpio0 8 1>;
+               };
+               router {
+                       label = "f5d8235v2:blue:router";
+                       gpio = <&gpio0 9 1>;
+               };
+               storage {
+                       label = "f5d8235v2:blue:storage";
+                       gpio = <&gpio0 23 1>;
+               };
+               storage2 {
+                       label = "f5d8235v2:amber:storage";
+                       gpio = <&gpio0 22 1>;
+               };
+               security {
+                       label = "f5d8235v2:blue:security";
+                       gpio = <&gpio0 13 1>;
+               };
+               security2 {
+                       label = "f5d8235v2:amber:security";
+                       gpio = <&gpio0 12 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts
new file mode 100644 (file)
index 0000000..f7039ff
--- /dev/null
+++ b/target/linux/ramips/dts/FONERA20N.dts
@@ -0,0 +1,91 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "FONERA20N", "ralink,rt3052-soc";
+       model = "La Fonera 2.0N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wifi {
+                       label = "fonera20n:orange:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+               power {
+                       label = "fonera20n:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               usb {
+                       label = "fonera20n:orange:usb";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x198>;
+               };
+               switch {
+                       label = "switch";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0x101>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
new file mode 100644 (file)
index 0000000..04170e3
--- /dev/null
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -0,0 +1,45 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "FREESTATION5", "ralink,rt3052-soc";
+       model = "ARC FreeStation5";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/HW550-3G.dts b/target/linux/ramips/dts/HW550-3G.dts
new file mode 100644 (file)
index 0000000..9fa37d3
--- /dev/null
+++ b/target/linux/ramips/dts/HW550-3G.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "HW550-3G", "ralink,rt3052-soc";
+       model = "Aztech HW550-3G";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usb {
+                       label = "hw550-3g:green:usb";
+                       gpios = <&gpio0 8 1>;
+               };
+               3g {
+                       label = "hw550-3g:green:3g";
+                       gpios = <&gpio0 11 1>;
+               };
+               status {
+                       label = "hw550-3g:green:status";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "hw550-3g:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               connect {
+                       label = "connect";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0xda>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/MOFI3500-3GN.dts b/target/linux/ramips/dts/MOFI3500-3GN.dts
new file mode 100644 (file)
index 0000000..9463db4
--- /dev/null
+++ b/target/linux/ramips/dts/MOFI3500-3GN.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
+       model = "MoFi Network MOFI3500-3GN";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usb {
+                       label = "mofi3500-3gn:green:usb";
+                       gpios = <&gpio0 8 1>;
+               };
+               3g {
+                       label = "mofi3500-3gn:green:3g";
+                       gpios = <&gpio0 11 1>;
+               };
+               status {
+                       label = "mofi3500-3gn:green:status";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "mofi3500-3gn:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               connect {
+                       label = "connect";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0xda>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts
new file mode 100644 (file)
index 0000000..377bea5
--- /dev/null
+++ b/target/linux/ramips/dts/MZK-W300NH2.dts
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "MZK-W300NH2", "ralink,rt3052-soc";
+       model = "Planex MZK-W300NH2";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "mdio", "sdram", "rgmii";
+                       ralink,gpiommux = "i2c", "spi", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "mzkw300nh2:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               wlan {
+                       label = "mzkw300nh2:amber:wlan";
+                       gpios = <&gpio0 14 1>;
+               };
+               wps {
+                       label = "mzkw300nh2:amber:wps";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x211>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+               rt {
+                       label = "rt";
+                       gpios = <&gpio0 13 1>;
+                       linux,code = <0x100>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/NBG-419N.dts b/target/linux/ramips/dts/NBG-419N.dts
new file mode 100644 (file)
index 0000000..a0e2c0e
--- /dev/null
+++ b/target/linux/ramips/dts/NBG-419N.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "NBG-419N", "ralink,rt3052-soc";
+       model = "ZyXEL NBG-419N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "nbg-419n:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps {
+                       label = "nbg-419n:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/NW718.dts b/target/linux/ramips/dts/NW718.dts
new file mode 100644 (file)
index 0000000..f58bd0f
--- /dev/null
+++ b/target/linux/ramips/dts/NW718.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "NW718", "ralink,rt3050-soc";
+       model = "Netcore NW718";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,3712k@0x60000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,gpiommux = "i2c";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <25000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               cpu {
+                       label = "nw718:amber:cpu";
+                       gpios = <&gpio0 13 1>;
+               };
+               usb {
+                       label = "nw718:amber:usb";
+                       gpios = <&gpio0 8 1>;
+               };
+               wps {
+                       label = "nw718:amber:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
new file mode 100644 (file)
index 0000000..61647d7
--- /dev/null
+++ b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
@@ -0,0 +1,119 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
+       model = "Omnima EMB HPM";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "spi";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               timer@100 {
+                       status = "okay";
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <25000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+               ralink,phy-mask = <0x10>;
+               phy-mode = "rgmii";
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 14 0>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               
+               power {
+                       label = "emb:orange:power";
+                       gpios = <&gpio0 7 1>;
+               };
+               status {
+                       label = "emb:green:status";
+                       gpios = <&gpio0 21 1>;
+               };
+               eth {
+                       label = "emb:green:eth";
+                       gpios = <&gpio0 20 1>;
+               };
+               eth2 {
+                       label = "emb:red:eth";
+                       gpios = <&gpio0 18 1>;
+               };
+               wifi {
+                       label = "emb:green:wifi";
+                       gpios = <&gpio0 17 1>;
+               };
+               wifi2 {
+                       label = "emb:red:wifi";
+                       gpios = <&gpio0 19 1>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+               /* gpio 12 and 13 handle the OC input */
+               usb0 {
+                       gpio-export,name = "usb0";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 2 0>;
+               };
+               usb1 {
+                       gpio-export,name = "usb1";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 1 0>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/OMNI-EMB.dts b/target/linux/ramips/dts/OMNI-EMB.dts
new file mode 100644 (file)
index 0000000..a4de320
--- /dev/null
+++ b/target/linux/ramips/dts/OMNI-EMB.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "OMNI-EMB", "ralink,rt3052-soc";
+       model = "Omnima MiniEMBWiFi";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "emb:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wlan {
+                       label = "emb:green:wlan";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts
new file mode 100644 (file)
index 0000000..440a847
--- /dev/null
+++ b/target/linux/ramips/dts/PSR-680W.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "PSR-680W", "ralink,rt3052-soc";
+       model = "Petatel PSR-680W Wireless 3G Router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "uartlite", "sdram";
+                       ralink,gpiommux = "spi", "jtag", "mdio", "rgmii";
+                       ralink,uartmux = "i2s uartf";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wan {
+                       label = "psr-680w:red:wan";
+                       gpios = <&gpio0 19 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/PWH2004.dts b/target/linux/ramips/dts/PWH2004.dts
new file mode 100644 (file)
index 0000000..113723e
--- /dev/null
+++ b/target/linux/ramips/dts/PWH2004.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "PWH2004", "ralink,rt3052-soc";
+       model = "Prolink PWH2004";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wifi {
+                       label = "pwh2004:red:wifi";
+                       gpios = <&gpio0 14 1>;
+               };
+               power {
+                       label = "pwh2004:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/RT-G32-B1.dts b/target/linux/ramips/dts/RT-G32-B1.dts
new file mode 100644 (file)
index 0000000..d853953
--- /dev/null
+++ b/target/linux/ramips/dts/RT-G32-B1.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "RT-G32-B1", "ralink,rt3050-soc";
+       model = "Asus RT-G32 B1";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts
new file mode 100644 (file)
index 0000000..92b4075
--- /dev/null
+++ b/target/linux/ramips/dts/RT-N10-PLUS.dts
@@ -0,0 +1,78 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
+       model = "Asus RT-N10+";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wps {
+                       label = "asus:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/RT-N13U.dts b/target/linux/ramips/dts/RT-N13U.dts
new file mode 100644 (file)
index 0000000..056ac4e
--- /dev/null
+++ b/target/linux/ramips/dts/RT-N13U.dts
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "RT-N13U", "ralink,rt3052-soc";
+       model = "Asus RT-N13U";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "rt-n13u:power";
+                       gpios = <&gpio0 7 1>;
+               };
+               wifi {
+                       label = "rt-n13u:wifi";
+                       gpios = <&gpio0 8 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <10>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts
new file mode 100644 (file)
index 0000000..8d303b8
--- /dev/null
+++ b/target/linux/ramips/dts/RTN56U.dts
@@ -0,0 +1,140 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "RT-N56U", "ralink,rt3883-soc";
+       model = "Asus RT-N56U";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "spi";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <0>;
+               };
+
+               timer@100 {
+                       status = "okay";
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <25000000>;
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+                               partition@30000 {
+                                       label = "uboot-env";
+                                       reg = <0x30000 0x4000>;
+                                       read-only;
+                               };
+                               factory: partition@34000 {
+                                       label = "factory";
+                                       reg = <0x34000 0x4000>;
+                                       read-only;
+                               };
+                               partition@38000 {
+                                       label = "nvram";
+                                       reg = <0x38000 0x8000>;
+                                       read-only;
+                               };
+                               partition@40000 {
+                                       label = "devdata";
+                                       reg = <0x40000 0x10000>;
+                               };
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+
+               ralink,fixed-link = <1000 1 1 1>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+               ralink,2ghz = <0>;
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       rtl8366b {
+               compatible = "rtl8367b";
+               gpio-sda = <&gpio0 1 0>;
+               gpio-sck = <&gpio0 2 0>;
+               realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 13 0>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 2 0>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               
+               power {
+                       label = "asus:blue:power";
+                       gpios = <&gpio0 0 1>;
+               };
+               lan {
+                       label = "asus:blue:lan";
+                       gpios = <&gpio0 19 1>;
+               };
+               wan {
+                       label = "asus:blue:wan";
+                       gpios = <&gpio1 3 1>;
+               };
+               usb {
+                       label = "asus:blue:usb";
+                       gpios = <&gpio1 0 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/SL-R7205.dts b/target/linux/ramips/dts/SL-R7205.dts
new file mode 100644 (file)
index 0000000..56dbec8
--- /dev/null
+++ b/target/linux/ramips/dts/SL-R7205.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "SL-R7205", "ralink,rt3052-soc";
+       model = "Skyline SL-R7205 Wireless 3G Router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wifi {
+                       label = "sl-r7205:green:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts
new file mode 100644 (file)
index 0000000..677fa2c
--- /dev/null
+++ b/target/linux/ramips/dts/TEW-691GR.dts
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "TEW-691GR", "ralink,rt3883-soc";
+       model = "TRENDnet TEW-691GR";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "spi";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               timer@100 {
+                       status = "okay";
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <25000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+               ralink,phy-mask = <0x1>;
+               phy-mode = "rgmii";
+       };
+
+       wmac@10180000 {
+               status = "okay";
+               ralink,5ghz = <0>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 2 1>;
+                       linux,code = <0x211>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0xf7>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wps {
+                       label = "trendnet:green:wps";
+                       gpios = <&gpio0 9 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
new file mode 100644 (file)
index 0000000..1e31202
--- /dev/null
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -0,0 +1,88 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "TEW-692GR", "ralink,rt3883-soc";
+       model = "TRENDnet TEW-692GR";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x10000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "spi";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               timer@100 {
+                       status = "okay";
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l6405d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <25000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+               ralink,phy-mask = <0x1>;
+               phy-mode = "rgmii";
+       };
+
+       wmac@10180000 {
+               status = "okay";
+               ralink,5ghz = <0>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 2 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wps {
+                       label = "trendnet:orange:wps";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps2 {
+                       label = "trendnet:green:wps";
+                       gpios = <&gpio1 4 1>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts
new file mode 100644 (file)
index 0000000..fbcfa15
--- /dev/null
+++ b/target/linux/ramips/dts/UR-326N4G.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "UR-326N4G", "ralink,rt3052-soc";
+       model = "UR-326N4G Wireless N router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3g {
+                       label = "ur326:green:3g";
+                       gpios = <&gpio0 9 1>;
+               };
+               gateway {
+                       label = "ur326:green:gateway";
+                       gpios = <&gpio0 11 1>;
+               };
+               ap {
+                       label = "ur326:green:ap";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "ur326:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+               station {
+                       label = "ur326:green:station";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               mode {
+                       label = "mode";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x32>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/UR-336UN.dts b/target/linux/ramips/dts/UR-336UN.dts
new file mode 100644 (file)
index 0000000..a532b9c
--- /dev/null
+++ b/target/linux/ramips/dts/UR-336UN.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "UR-336UN", "ralink,rt3052-soc";
+       model = "UR-336UN Wireless N router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3g {
+                       label = "ur336:green:3g";
+                       gpios = <&gpio0 9 1>;
+               };
+               gateway {
+                       label = "ur336:green:gateway";
+                       gpios = <&gpio0 11 1>;
+               };
+               ap {
+                       label = "ur336:green:ap";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "ur336:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+               station {
+                       label = "ur336:green:station";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               mode {
+                       label = "mode";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x32>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/V22RW-2X2.dts b/target/linux/ramips/dts/V22RW-2X2.dts
new file mode 100644 (file)
index 0000000..2e5e583
--- /dev/null
+++ b/target/linux/ramips/dts/V22RW-2X2.dts
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "V22RW-2X2", "ralink,rt3052-soc";
+       model = "Ralink AP-RT3052-V22RW-2X2";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               security {
+                       label = "v22rw-2x2:green:security";
+                       gpios = <&gpio0 13 1>;
+               };
+               wps {
+                       label = "v22rw-2x2:red:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts
new file mode 100644 (file)
index 0000000..0e0749e
--- /dev/null
+++ b/target/linux/ramips/dts/W306R_V20.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "W306R_V20", "ralink,rt3052-soc";
+       model = "Tenda W306R V2.0";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               sys {
+                       label = "w306r-v20:green:sys";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps {
+                       label = "w306r-v20:green:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "RESET/WPS";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/W502U.dts b/target/linux/ramips/dts/W502U.dts
new file mode 100644 (file)
index 0000000..befea40
--- /dev/null
+++ b/target/linux/ramips/dts/W502U.dts
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "W502U", "ralink,rt3052-soc";
+       model = "ALFA Networks W502U";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               usb {
+                       label = "alfa:blue:usb";
+                       gpios = <&gpio0 13 1>;
+               };
+               wps {
+                       label = "alfa:blue:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WCR150GN.dts b/target/linux/ramips/dts/WCR150GN.dts
new file mode 100644 (file)
index 0000000..93c7985
--- /dev/null
+++ b/target/linux/ramips/dts/WCR150GN.dts
@@ -0,0 +1,86 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WCR150GN", "ralink,rt3052-soc";
+       model = "Sparklan WCR-150GN";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               user {
+                       label = "wcr150gn:amber:user";
+                       gpios = <&gpio0 12 1>;
+               };
+               power {
+                       label = "wcr150gn:amber:power";
+                       gpios = <&gpio0 8 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x211>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
new file mode 100644 (file)
index 0000000..75f7b5a
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WHR-G300N", "ralink,rt3052-soc";
+       model = "Buffalo WHR-G300N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               diag {
+                       label = "whr-g300n:red:diag";
+                       gpios = <&gpio0 7 1>;
+               };
+               router {
+                       label = "whr-g300n:green:router";
+                       gpios = <&gpio0 9 1>;
+               };
+               security {
+                       label = "whr-g300n:amber:security";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               aoss {
+                       label = "aoss";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+               router-off {
+                       label = "router-off";
+                       gpios = <&gpio0 11 1>;
+                       linux,code = <0x102>;
+               };
+               router-on {
+                       label = "router-on";
+                       gpios = <&gpio0 8 1>;
+                       linux,code = <0x103>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WL-351.dts b/target/linux/ramips/dts/WL-351.dts
new file mode 100644 (file)
index 0000000..f73a01a
--- /dev/null
+++ b/target/linux/ramips/dts/WL-351.dts
@@ -0,0 +1,107 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WL-351", "ralink,rt3052-soc";
+       model = "Sitecom WL-351 v1 002";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "i2c", "spi", "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3f>;
+               ralink,fct2 = <0x0002500c>;
+               /*
+                * ext phy base addr 31, rx/tx clock skew 0,
+                * turbo mii off, rgmi 3.3v off, port 5 polling off
+                * port5: enabled, gige, full-duplex, rx/tx-flow-control
+                * port6: enabled, gige, full-duplex, rx/tx-flow-control
+               */
+               ralink,fpa2 = <0x1f003fff>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "wl-351:amber:power";
+                       gpio = <&gpio0 8 1>;
+               };
+               unpopulated {
+                       label = "wl-351:amber:unpopulated";
+                       gpio = <&gpio0 12 1>;
+               };
+               unpopulated2 {
+                       label = "wl-351:blue:unpopulated";
+                       gpio = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpio = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpio = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       rtl8366rb {
+               compatible = "rtl8367rb";
+               gpio-sda = <&gpio0 1 0>;
+               gpio-sck = <&gpio0 2 0>;
+       };
+};

diff --git a/target/linux/ramips/dts/WL341V3.dts b/target/linux/ramips/dts/WL341V3.dts
new file mode 100644 (file)
index 0000000..ee877e2
--- /dev/null
+++ b/target/linux/ramips/dts/WL341V3.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WL341V3", "ralink,rt3052-soc";
+       model = "Sitecom WL-341 v3";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "mtdparts=1f000000.cfi:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,3776k@0x40000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               first {
+                       label = "wl341v3:amber:first";
+                       gpios = <&gpio0 9 1>;
+               };
+               first2 {
+                       label = "wl341v3:blue:first";
+                       gpios = <&gpio0 13 1>;
+               };
+               third {
+                       label = "wl341v3:amber:third";
+                       gpios = <&gpio0 11 1>;
+               };
+               third2 {
+                       label = "wl341v3:blue:third";
+                       gpios = <&gpio0 14 1>;
+               };
+               fourth {
+                       label = "wl341v3:blue:fourth";
+                       gpios = <&gpio0 10 1>;
+               };
+               fifth {
+                       label = "wl341v3:amber:fifth";
+                       gpios = <&gpio0 12 1>;
+               };
+               fifth2 {
+                       label = "wl341v3:blue:fifth";
+                       gpios = <&gpio0 8 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 5 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WL_330N.dts b/target/linux/ramips/dts/WL_330N.dts
new file mode 100644 (file)
index 0000000..370f36b
--- /dev/null
+++ b/target/linux/ramips/dts/WL_330N.dts
@@ -0,0 +1,84 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WL_330N", "ralink,rt3050-soc";
+       model = "Asus WL-330N";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               link {
+                       label = "asus:blue:link";
+                       gpios = <&gpio0 9 1>;
+               };
+               power {
+                       label = "asus:blue:power";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WL_330N3G.dts b/target/linux/ramips/dts/WL_330N3G.dts
new file mode 100644 (file)
index 0000000..2d5b030
--- /dev/null
+++ b/target/linux/ramips/dts/WL_330N3G.dts
@@ -0,0 +1,92 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WL_330N3G", "ralink,rt3050-soc";
+       model = "Asus WL-330N3G";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3g {
+                       label = "asus:blue:3g";
+                       gpios = <&gpio0 9 1>;
+               };
+               3g2 {
+                       label = "asus:red:3g";
+                       gpios = <&gpio0 13 1>;
+               };
+               power {
+                       label = "asus:blue:power";
+                       gpios = <&gpio0 11 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WR512-3GN-4M.dts b/target/linux/ramips/dts/WR512-3GN-4M.dts
new file mode 100644 (file)
index 0000000..8de7cda
--- /dev/null
+++ b/target/linux/ramips/dts/WR512-3GN-4M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WR512-3GN", "ralink,rt3052-soc";
+       model = "WR512-3GN-like router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3g {
+                       label = "wr512:green:3g";
+                       gpios = <&gpio0 9 1>;
+               };
+               gateway {
+                       label = "wr512:green:gateway";
+                       gpios = <&gpio0 11 1>;
+               };
+               ap {
+                       label = "wr512:green:ap";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "wr512:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+               station {
+                       label = "wr512:green:station";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               mode {
+                       label = "mode";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x32>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WR512-3GN-8M.dts b/target/linux/ramips/dts/WR512-3GN-8M.dts
new file mode 100644 (file)
index 0000000..ba2a57f
--- /dev/null
+++ b/target/linux/ramips/dts/WR512-3GN-8M.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WR512-3GN", "ralink,rt3052-soc";
+       model = "WR512-3GN-like router";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x2f>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               3g {
+                       label = "wr512:green:3g";
+                       gpios = <&gpio0 9 1>;
+               };
+               gateway {
+                       label = "wr512:green:gateway";
+                       gpios = <&gpio0 11 1>;
+               };
+               ap {
+                       label = "wr512:green:ap";
+                       gpios = <&gpio0 12 1>;
+               };
+               wps {
+                       label = "wr512:green:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+               station {
+                       label = "wr512:green:station";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset_wps {
+                       label = "reset_wps";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               mode {
+                       label = "mode";
+                       gpios = <&gpio0 7 1>;
+                       linux,code = <0x32>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
new file mode 100644 (file)
index 0000000..24c497b
--- /dev/null
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "WR6202", "ralink,rt3052-soc";
+       model = "AWB WR6202";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wps {
+                       label = "wr6202:blue:wps";
+                       gpios = <&gpio0 14 1>;
+               };
+               3g {
+                       label = "wr6202:blue:3g";
+                       gpios = <&gpio0 13 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio0 11 0>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/XDXRN502J.dts b/target/linux/ramips/dts/XDXRN502J.dts
new file mode 100644 (file)
index 0000000..aa6dd95
--- /dev/null
+++ b/target/linux/ramips/dts/XDXRN502J.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "XDXRN502J", "ralink,rt3052-soc";
+       model = "XDX RN502J";
+
+       memorydetect {
+               ralink,memory = <0x0 0x200000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
+       };
+
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
+                       ralink,gpiommux = "mdio";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x3e>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               wifi {
+                       label = "xdxrn502j:green:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+               power {
+                       label = "xdxrn502j:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+
+       otg@101c0000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/dts/mt7620.dtsi b/target/linux/ramips/dts/mt7620.dtsi
new file mode 100644 (file)
index 0000000..c0eb5bc
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620.dtsi
@@ -0,0 +1,136 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,mt7620-timer", "ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,mt7620-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,mt7620-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <32>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               gpio3: gpio@688 {
+                       compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio";
+                       reg = <0x688 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <1>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               spi@b00 {
+                       compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi
new file mode 100644 (file)
index 0000000..2d6a7a9
--- /dev/null
+++ b/target/linux/ramips/dts/rt2880.dtsi
@@ -0,0 +1,114 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt2880-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@300000 {
+                       compatible = "ralink,rt2880-sysc";
+                       reg = <0x300000 0x100>;
+               };
+
+               timer@300100 {
+                       compatible = "ralink,rt2880-timer";
+                       reg = <0x300100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@300120 {
+                       compatible = "ralink,rt2880-wdt";
+                       reg = <0x300120 0x10>;
+               };
+
+               intc: intc@300200 {
+                       compatible = "ralink,rt2880-intc";
+                       reg = <0x300200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300300 {
+                       compatible = "ralink,rt2880-memc";
+                       reg = <0x300300 0x100>;
+               };
+
+               gpio0: gpio@300600 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+               };
+
+               gpio1: gpio@300638 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               gpio2: gpio@300660 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <32>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               uartlite@300c00 {
+                       compatible = "ralink,rt2880-uart", "ns16550a";
+                       reg = <0x300c00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+};

diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi
new file mode 100644 (file)
index 0000000..a6996dc
--- /dev/null
+++ b/target/linux/ramips/dts/rt3050.dtsi
@@ -0,0 +1,172 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <12>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               spi@b00 {
+                       compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+
+       };
+
+       ethernet@10100000 {
+               compatible = "ralink,rt3050-eth";
+               reg = <0x10100000 10000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+       };
+
+       esw@10110000 {
+               compatible = "ralink,rt3050-esw";
+               reg = <0x10110000 8000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <17>;
+
+               status = "disabled";
+       };
+
+       wmac@10180000 {
+               compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
+               reg = <0x10180000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               ralink,eeprom = "soc_wmac.eeprom"; 
+
+               status = "disabled";
+       };
+
+       otg@101c0000 {
+               compatible = "ralink,rt3050-otg";
+               reg = <0x101c0000 40000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+};

diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi
new file mode 100644 (file)
index 0000000..25c1dd3
--- /dev/null
+++ b/target/linux/ramips/dts/rt3352.dtsi
@@ -0,0 +1,181 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt3352-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,rt3352-sysc", "ralink,rt3050-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,rt3352-timer", "ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,rt3352-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,rt3352-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <12>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               spi@b00 {
+                       compatible = "ralink,rt3352-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+
+       ethernet@10100000 {
+               compatible = "ralink,rt3352-eth", "ralink,rt3050-eth";
+               reg = <0x10100000 10000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+       };
+
+       esw@10110000 {
+               compatible = "ralink,rt3352-esw", "ralink,rt3050-esw";
+               reg = <0x10110000 8000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <17>;
+
+               status = "disabled";
+       };
+
+       wmac@10180000 {
+               compatible = "ralink,rt3352-wmac", "ralink,rt2880-wmac";
+               reg = <0x10180000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               ralink,eeprom = "soc_wmac.eeprom"; 
+
+               status = "disabled";
+       };
+
+       ehci@101c0000 {
+               compatible = "ralink,rt3352-ehci", "ehci-platform";
+               reg = <0x101c0000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+
+       ohci@101c1000 {
+               compatible = "ralink,rt3352-ohci", "ohci-platform";
+               reg = <0x101c1000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+};

diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi
new file mode 100644 (file)
index 0000000..5a4c485
--- /dev/null
+++ b/target/linux/ramips/dts/rt3883.dtsi
@@ -0,0 +1,190 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt3883-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips74Kc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       aliases {
+               spi0 = &spi0;
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <32>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio3: gpio@688 {
+                       compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
+                       reg = <0x688 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               spi0: spi@b00 {
+                       compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+
+       ethernet@10100000 {
+               compatible = "ralink,rt3883-eth";
+               reg = <0x10100000 10000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+       };
+
+       wmac@10180000 {
+               compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
+               reg = <0x10180000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               ralink,eeprom = "soc_wmac.eeprom"; 
+
+               status = "disabled";
+       };
+
+       ehci@101c0000 {
+               compatible = "ralink,rt3883-ehci", "ehci-platform";
+               reg = <0x101c0000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+
+       ohci@101c1000 {
+               compatible = "ralink,rt3883-ohci", "ohci-platform";
+               reg = <0x101c1000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+};

diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi
new file mode 100644 (file)
index 0000000..1103700
--- /dev/null
+++ b/target/linux/ramips/dts/rt5350.dtsi
@@ -0,0 +1,181 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt5350-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,rt5350-timer", "ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <12>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               spi@b00 {
+                       compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+
+       ethernet@10100000 {
+               compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
+               reg = <0x10100000 10000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+       };
+
+       esw@10110000 {
+               compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
+               reg = <0x10110000 8000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <17>;
+
+               status = "disabled";
+       };
+
+       wmac@10180000 {
+               compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
+               reg = <0x10180000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               ralink,eeprom = "soc_wmac.eeprom"; 
+
+               status = "disabled";
+       };
+
+       ehci@101c0000 {
+               compatible = "ralink,rt5350-ehci", "ehci-platform";
+               reg = <0x101c0000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+
+       ohci@101c1000 {
+               compatible = "ralink,rt5350-ohci", "ohci-platform";
+               reg = <0x101c1000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+};