add binary images for au1000 (for use with mtd)
authorFelix Fietkau <nbd@openwrt.org>
Tue, 12 Dec 2006 01:23:37 +0000 (01:23 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 12 Dec 2006 01:23:37 +0000 (01:23 +0000)
SVN-Revision: 5767

target/linux/au1000-2.6/image/Makefile

index 9c7bb06..c9ab7ca 100644 (file)
@@ -25,7 +25,8 @@ define Build/Clean
 endef
 
 DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-OBJCOPY_KERNEL := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS))
+OBJCOPY_SREC := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS))
+OBJCOPY_BIN := $(TARGET_CROSS)objcopy -S -O binary $(addprefix --remove-section=,$(DROP_SECTIONS))
 
 define Image/Prepare
        cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
@@ -34,7 +35,7 @@ define Image/Prepare
        $(MAKE) -C ../../generic-2.6/image/lzma-loader \
                $(LOADER_MAKEOPTS) \
                clean compile
-       $(OBJCOPY_KERNEL) $(KDIR)/loader.elf $(KDIR)/kernel.ram.srec
+       $(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/kernel.ram.srec
        
        # Build Flash image
        $(MAKE) -C ../../generic-2.6/image/lzma-loader \
@@ -43,13 +44,16 @@ define Image/Prepare
                LOADER_ENTRY=$(FLASH_KERNEL) \
                LOADER_TYPE=_flash \
                clean compile
-       $(OBJCOPY_KERNEL) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.srec
+       $(OBJCOPY_SREC) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.srec
+       $(OBJCOPY_BIN) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.bin
 endef
 
 define Image/Build
        $(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec
        grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
        grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
+       $(CP) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.bin
+       $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs
 endef
 
 $(eval $(call BuildImage))