brcm47xx: whitespace cleanups
authorHauke Mehrtens <hauke@hauke-m.de>
Sun, 25 Nov 2012 14:03:51 +0000 (14:03 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 25 Nov 2012 14:03:51 +0000 (14:03 +0000)
SVN-Revision: 34329

target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
target/linux/brcm47xx/base-files/lib/preinit/05_reset_button_brcm
target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm
target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm

index 3cd760e..038a415 100644 (file)
@@ -28,7 +28,7 @@ check_module () {
 init_iface() {
        check_module tg3
        insmod switch-core
-       check_module switch-robo || check_module switch-adm  || { 
+       check_module switch-robo || check_module switch-adm  || {
          check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
        } || rmmod switch-core
 }
index a93559f..c7d0fc8 100644 (file)
@@ -5,11 +5,10 @@ failsafe_ip() {
                ifconfig eth0 0.0.0.0 down
                echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
        }
-       
+
        [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-               ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+               ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
         }
 }
 
 boot_hook_add failsafe failsafe_ip
-
index a0a3033..0a89150 100644 (file)
@@ -2,7 +2,7 @@
 
 port_net_echo() {
        [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-               if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then 
+               if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
                        netmsg $pi_broadcast "$1"
                fi
        }
@@ -20,7 +20,7 @@ preinit_ip_deconfig() {
 
 preinit_net_echo() {
        preinit_ip
-       
+
        [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
                echo 1 > /proc/switch/eth0/reset
 
@@ -30,10 +30,8 @@ preinit_net_echo() {
                        echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
                        port_net_echo $1
                }; done
-               
+
                echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
-               
+
        } || port_net_echo $1
 }
-
-