[uboot-lantiq]
authorJohn Crispin <john@openwrt.org>
Tue, 1 Feb 2011 14:26:47 +0000 (14:26 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 1 Feb 2011 14:26:47 +0000 (14:26 +0000)
* rework the arcadyan sku support
* adds a few new boards and switches

SVN-Revision: 25273

38 files changed:
package/uboot-lantiq/Config.in [deleted file]
package/uboot-lantiq/Makefile
package/uboot-lantiq/files/board/arcadyan/Makefile [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S [deleted file]
package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds [deleted file]
package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/athrs26_phy.h [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/board.c [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/config.mk [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/ddr_settings.h [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/ddr_settings_psc_166.h [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/ddr_settings_qimonda.h [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/lowlevel_init.S [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/pmuenable.S [new file with mode: 0644]
package/uboot-lantiq/files/board/arcadyan/u-boot.lds [new file with mode: 0644]
package/uboot-lantiq/files/include/configs/arcadyan-common.h [new file with mode: 0644]
package/uboot-lantiq/files/include/configs/arv4518.h
package/uboot-lantiq/files/include/configs/arv452c.h [new file with mode: 0644]
package/uboot-lantiq/files/include/configs/arv752DPW.h [new file with mode: 0644]
package/uboot-lantiq/files/include/configs/arv752DPW22.h [new file with mode: 0644]
package/uboot-lantiq/files/include/configs/arv752DWP22.h [deleted file]
package/uboot-lantiq/files/include/configs/ifx-common.h
package/uboot-lantiq/patches/500-arcadyan.patch

diff --git a/package/uboot-lantiq/Config.in b/package/uboot-lantiq/Config.in
deleted file mode 100644 (file)
index d434667..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-menu "Configuration"
-       depends on PACKAGE_uboot-lantiq
-
-config UBOOT_TARGET
-       string "target"
-       default "easy50712_DDR166M"
-       help
-         The configuration reflects the settings for a dedicated board hardware.
-         Select for Danube evaluation board easy50712_DDR166M .
-         Select for AR9 evaluation board easy50812_DDR166M .
-
-config UBOOT_RAMBOOT
-       bool "Enable RAM boot image"
-       help
-         Using the UART boot mode of the ROM code this image could be loaded to the RAM.
-         While executing the image in the RAM the functionality of the uboot image can be 
-         tested first without touching the original flash.
-         Note: Be carefull, by saving the environment the flash will be modified.
-         The OWRT flash layout differs from the layout provided by Lantiq / Infineon.
-
-config UBOOT_RAMBOOT_DDR_CONFIG
-       string "DDR configuration file"
-       default "easy50712_DDR166M.conf"
-       depends on UBOOT_RAMBOOT
-       help
-         The DDR configuration file should reflect the DDR memory device configuration .
-         It will be used to create a RAM boot image
-         Select for Danube evalution board easy50712_DDR166M.conf .
-         Select for AR9 evalution board easy50812.conf .
-         Select for arcadyan PSC RAM board arcadyan.conf .
-
-endmenu
index 9b037f4..d90e322 100644 (file)
@@ -22,17 +22,48 @@ PKG_TARGETS:=bin
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(DUMP),)
-  STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell $(SH_FUNC) grep '^CONFIG_UBOOT_' $(TOPDIR)/.config | md5s)
+  STAMP_CONFIGURED:=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/.configured
+  STAMP_BUILT:=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/.built
 endif
 
-define Package/uboot-lantiq
+define Package/uboot-lantiq-template
   SECTION:=boot
   CATEGORY:=Boot Loaders
   DEPENDS:=@TARGET_lantiq
-  TITLE:=U-Boot for Lantiq reference boards
   URL:=http://www.denx.de/wiki/U-Boot
+  VARIANT:=$(1)
+  TITLE:=$(1) ($(2))
+  MAINTAINER:=John Crispin <blogic@openwrt.org>
 endef
 
+#Lantiq
+Package/uboot-lantiq-easy50712_DDR166M=$(call Package/uboot-lantiq-template,easy50712_DDR166M,NOR)
+Package/uboot-lantiq-easy50712_DDR166M_ramboot=$(call Package/uboot-lantiq-template,easy50712_DDR166M_ramboot,RAM)
+Package/uboot-lantiq-easy50812_DDR166M=$(call Package/uboot-lantiq-template,easy50812_DDR166M,NOR)
+Package/uboot-lantiq-easy50812_DDR166M_ramboot=$(call Package/uboot-lantiq-template,easy50812_DDR166M_ramboot,RAM)
+
+DDR_CONFIG_easy50712_DDR166M_ramboot:=easy50712_DDR166M
+DDR_CONFIG_easy50812_DDR166M_ramboot:=easy50812
+
+#Arcadyan
+Package/uboot-lantiq-arv4518=$(call Package/uboot-lantiq-template,arv4518,NOR)
+Package/uboot-lantiq-arv4518_ramboot=$(call Package/uboot-lantiq-template,arv4518_ramboot,RAM)
+Package/uboot-lantiq-arv4518_brnboot=$(call Package/uboot-lantiq-template,arv4518_brnboot,BRN)
+Package/uboot-lantiq-arv452C=$(call Package/uboot-lantiq-template,arv452C,NOR)
+Package/uboot-lantiq-arv452C_ramboot=$(call Package/uboot-lantiq-template,arv452C_ramboot,RAM)
+Package/uboot-lantiq-arv452C_brnboot=$(call Package/uboot-lantiq-template,arv452C_brnboot,BRN)
+Package/uboot-lantiq-arv752DPW=$(call Package/uboot-lantiq-template,arv752DPW,NOR)
+Package/uboot-lantiq-arv752DPW_ramboot=$(call Package/uboot-lantiq-template,arv752DPW_ramboot,RAM)
+Package/uboot-lantiq-arv752DPW_brnboot=$(call Package/uboot-lantiq-template,arv752DPW_brnboot,BRN)
+Package/uboot-lantiq-arv752DPW22=$(call Package/uboot-lantiq-template,arv752DPW22,NOR)
+Package/uboot-lantiq-arv752DPW22_ramboot=$(call Package/uboot-lantiq-template,arv752DPW22_ramboot,RAM)
+Package/uboot-lantiq-arv752DPW22_brnboot=$(call Package/uboot-lantiq-template,arv752DPW22_brnboot,BRN)
+
+DDR_CONFIG_arv4518_ramboot:=arcadyan_psc166
+DDR_CONFIG_arv452C_ramboot:=arcadyan_psc166
+DDR_CONFIG_arv752DPW_ramboot:=arcadyan_psc166
+DDR_CONFIG_arv752DPW22_ramboot:=arcadyan_psc166
+
 define Build/Prepare
        $(PKG_UNPACK)
        cp -r $(CP_OPTS) $(FILES_DIR)/* $(PKG_BUILD_DIR)/
@@ -40,30 +71,20 @@ define Build/Prepare
        find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
 endef
 
-UBOOT_TARGET:=$(call qstrip,$(CONFIG_UBOOT_TARGET))
-UBOOT_RAMBOOT_DDR_CONFIG:=$(call qstrip,$(CONFIG_UBOOT_RAMBOOT_DDR_CONFIG))
-
 UBOOT_MAKE_OPTS:= \
        CROSS_COMPILE=$(TARGET_CROSS) \
        ENDIANNESS= \
        V=1
 
-define Package/uboot-lantiq/config
-       source "$(SOURCE)/Config.in"
-endef
-
 define Build/Configure/Target
        $(MAKE) -s -C $(PKG_BUILD_DIR) \
                $(UBOOT_MAKE_OPTS) \
-               O=$(PKG_BUILD_DIR)/$(1) \
+               O=$(PKG_BUILD_DIR)/$(BUILD_VARIANT) \
                $(1)_config
 endef
 
 define Build/Configure
-       $(call Build/Configure/Target,$(UBOOT_TARGET))
-ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
-       $(call Build/Configure/Target,$(UBOOT_TARGET)_ramboot)
-endif
+       $(call Build/Configure/Target,$(BUILD_VARIANT))
 endef
 
 define Build/Compile/Target
@@ -74,26 +95,39 @@ define Build/Compile/Target
 endef
 
 define Build/Compile
-       $(call Build/Compile/Target,$(UBOOT_TARGET))
-ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
-       $(call Build/Compile/Target,$(UBOOT_TARGET)_ramboot)
-endif
+       $(call Build/Compile/Target,$(BUILD_VARIANT))
 endef
 
-define Package/uboot-lantiq/install
-       mkdir -p $(1)/$(UBOOT_TARGET)
+define Package/uboot-lantiq-$(BUILD_VARIANT)/install
+       mkdir -p $(1)
        dd \
-               if=$(PKG_BUILD_DIR)/$(UBOOT_TARGET)/u-boot.bin \
-               of=$(1)/$(UBOOT_TARGET)/u-boot.bin \
+               if=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot.bin \
+               of=$(1)/u-boot.bin \
                bs=64k conv=sync
-ifeq ($(CONFIG_UBOOT_RAMBOOT),y)
-       if [ -e $(UBOOT_RAMBOOT_DDR_CONFIG) ]; then \
+ifneq ($(findstring ramboot,$(BUILD_VARIANT)),)
+       if [ -e $(DDR_CONFIG_$(BUILD_VARIANT)).conf ]; then \
                perl ./gct \
-                       $(UBOOT_RAMBOOT_DDR_CONFIG) \
-                       $(PKG_BUILD_DIR)/$(UBOOT_TARGET)_ramboot/u-boot.srec \
-                       $(1)/$(UBOOT_TARGET)/u-boot.asc; \
+                       $(DDR_CONFIG_$(BUILD_VARIANT)).conf \
+                       $(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot.srec \
+                       $(1)/u-boot.asc; \
        fi
 endif
 endef
 
-$(eval $(call BuildPackage,uboot-lantiq))
+$(eval $(call BuildPackage,uboot-lantiq-easy50712_DDR166M))
+$(eval $(call BuildPackage,uboot-lantiq-easy50712_DDR166M_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-easy50812_DDR166M))
+$(eval $(call BuildPackage,uboot-lantiq-easy50812_DDR166M_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv4518))
+$(eval $(call BuildPackage,uboot-lantiq-arv4518_brnboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv4518_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv452C))
+$(eval $(call BuildPackage,uboot-lantiq-arv452C_brnboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv452C_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW_brnboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW_ramboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW22))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW22_brnboot))
+$(eval $(call BuildPackage,uboot-lantiq-arv752DPW22_ramboot))
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/Makefile b/package/uboot-lantiq/files/board/arcadyan/Makefile
new file mode 100644 (file)
index 0000000..fb9027c
--- /dev/null
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        += board.o athrs26_phy.o
+
+SOBJS  = lowlevel_init.o pmuenable.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv4518/Makefile
deleted file mode 100644 (file)
index 61f383b..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).a
-
-#COBJS := $(BOARD).o
-COBJS-y        += arv4518.o
-
-SOBJS  = lowlevel_init.o pmuenable.o
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS-y))
-SOBJS  := $(addprefix $(obj),$(SOBJS))
-
-$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
-       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c b/package/uboot-lantiq/files/board/arcadyan/arv4518/arv4518.c
deleted file mode 100644 (file)
index c015dd7..0000000
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2010
- * Thomas Langer, Ralph Hempel
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <miiphy.h>
-#include <asm/addrspace.h>
-#include <asm/danube.h>
-#include <asm/reboot.h>
-#include <asm/io.h>
-#if defined(CONFIG_CMD_HTTPD)
-#include <httpd.h>
-#endif
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#endif
-
-extern ulong ifx_get_ddr_hz(void);
-extern ulong ifx_get_cpuclk(void);
-
-/* IDs and registers of known external switches */
-#define ID_RTL8306     0x5988
-#define CONFIG_EXTRA_SWITCH 1
-void _machine_restart(void)
-{
-       *DANUBE_RCU_RST_REQ |=1<<30;
-}
-
-#ifdef CONFIG_SYS_RAMBOOT
-phys_size_t initdram(int board_type)
-{
-       return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
-}
-#elif defined(CONFIG_USE_DDR_RAM)
-phys_size_t initdram(int board_type)
-{
-       return (CONFIG_SYS_MAX_RAM);
-}
-#else
-
-static ulong max_sdram_size(void)     /* per Chip Select */
-{
-       /* The only supported SDRAM data width is 16bit.
-        */
-#define CFG_DW 4
-
-       /* The only supported number of SDRAM banks is 4.
-        */
-#define CFG_NB 4
-
-       ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
-       int   cols   = cfgpb0 & 0xF;
-       int   rows   = (cfgpb0 & 0xF0) >> 4;
-       ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
-
-       return size;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'.
- */
-
-static long int dram_size(long int *base, long int maxsize)
-{
-       volatile long int *addr;
-       ulong cnt, val;
-       ulong save[32];                 /* to make test non-destructive */
-       unsigned char i = 0;
-
-       for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
-               addr = base + cnt;              /* pointer arith! */
-
-               save[i++] = *addr;
-               *addr = ~cnt;
-       }
-
-       /* write 0 to base address */
-       addr = base;
-       save[i] = *addr;
-       *addr = 0;
-
-       /* check at base address */
-       if ((val = *addr) != 0) {
-               *addr = save[i];
-               return (0);
-       }
-
-       for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
-               addr = base + cnt;              /* pointer arith! */
-
-               val = *addr;
-               *addr = save[--i];
-
-               if (val != (~cnt)) {
-                       return (cnt * sizeof (long));
-               }
-       }
-       return (maxsize);
-}
-
-phys_size_t initdram(int board_type)
-{
-       int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
-       ulong size, max_size       = 0;
-       ulong our_address;
-
-       /* load t9 into our_address */
-       asm volatile ("move %0, $25" : "=r" (our_address) :);
-
-       /* Can't probe for RAM size unless we are running from Flash.
-        * find out whether running from DRAM or Flash.
-        */
-       if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
-       {
-               return max_sdram_size();
-       }
-
-       for (cols = 0x8; cols <= 0xC; cols++)
-       {
-               for (rows = 0xB; rows <= 0xD; rows++)
-               {
-                       *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
-                                                 (rows << 4) | cols;
-                       size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-                                                 max_sdram_size());
-
-                       if (size > max_size)
-                       {
-                               best_val = *DANUBE_SDRAM_MC_CFGPB0;
-                               max_size = size;
-                       }
-               }
-       }
-
-       *DANUBE_SDRAM_MC_CFGPB0 = best_val;
-       return max_size;
-}
-#endif
-
-int checkboard (void)
-{
-       unsigned long chipid = *DANUBE_MPS_CHIPID;
-       int part_num;
-
-       puts ("Board: ");
-
-       part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
-       switch (part_num)
-       {
-       case 0x129:
-       case 0x12D:
-       case 0x12b: 
-               puts("Danube/Twinpass/Vinax-VE ");
-               break;
-       default:
-               printf ("unknown, chip part number 0x%03X ", part_num);
-               break;
-       }
-       printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
-
-       printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
-       printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
-
-       return 0;
-}
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-int board_early_init_f(void)
-{
-#ifdef CONFIG_EBU_ADDSEL0
-       (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
-#endif
-#ifdef CONFIG_EBU_ADDSEL1
-       (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
-#endif
-#ifdef CONFIG_EBU_ADDSEL2
-       (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
-#endif
-#ifdef CONFIG_EBU_ADDSEL3
-       (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
-#endif
-#ifdef CONFIG_EBU_BUSCON0
-       (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
-#endif
-#ifdef CONFIG_EBU_BUSCON1
-       (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
-#endif
-#ifdef CONFIG_EBU_BUSCON2
-       (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
-#endif
-#ifdef CONFIG_EBU_BUSCON3
-       (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
-#endif
-
-       return 0;
-}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-
-#ifdef CONFIG_EXTRA_SWITCH
-static int external_switch_init(void)
-{
-       unsigned short chipid;
-       static char * const name = "lq_cpe_eth";
-
-       /* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
-       udelay(100000);
-
-       puts("\nsearching for rtl8306 switch ... ");
-       if (miiphy_read(name, 4, 30, &chipid) == 0) {
-               puts("s1\n");
-               if (chipid == ID_RTL8306) {
-                       puts("found");
-                       /* set led mode */
-                       miiphy_write(name, 0, 19, 0xffff);
-                       /* magic */
-                       miiphy_write(name, 4, 22, 0x877f);
-                       puts("\n");
-                       return 0;
-               }
-               puts("failed\n");
-       }
-       puts("\nno known switch found ... \n");
-
-       return 0;
-}
-#endif /* CONFIG_EXTRA_SWITCH */
-
-int board_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_IFX_ETOP)
-       uchar enetaddr[6];
-       if (!eth_getenv_enetaddr("ethaddr", enetaddr))
-               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
-
-       *DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
-       *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
-
-       if (lq_eth_initialize(bis))
-               return -1;
-
-       *DANUBE_RCU_RST_REQ |=1;
-       udelay(200000);
-       *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
-       udelay(1000);
-
-#ifdef CONFIG_EXTRA_SWITCH
-       if (external_switch_init()<0)
-               return -1;
-#endif /* CONFIG_EXTRA_SWITCH */
-#endif /* CONFIG_IFX_ETOP */
-
-       return 0;
-}
-
-#if defined(CONFIG_CMD_HTTPD)
-int do_http_upgrade(const unsigned char *data, const ulong size)
-{
-       char buf[128];
-
-       if(getenv ("ram_addr") == NULL)
-               return -1;
-       if(getenv ("kernel_addr") == NULL)
-               return -1;
-       /* check the image */
-       if(run_command("imi ${ram_addr}", 0) < 0) {
-               return -1;
-       }
-       /* write the image to the flash */
-       puts("http ugrade ...\n");
-       sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
-       return run_command(buf, 0);
-}
-
-int do_http_progress(const int state)
-{
-       /* toggle LED's here */
-       switch(state) {
-               case HTTP_PROGRESS_START:
-               puts("http start\n");
-               break;
-               case HTTP_PROGRESS_TIMEOUT:
-               puts(".");
-               break;
-               case HTTP_PROGRESS_UPLOAD_READY:
-               puts("http upload ready\n");
-               break;
-               case HTTP_PROGRESS_UGRADE_READY:
-               puts("http ugrade ready\n");
-               break;
-               case HTTP_PROGRESS_UGRADE_FAILED:
-               puts("http ugrade failed\n");
-               break;
-       }
-       return 0;
-}
-
-unsigned long do_http_tmp_address(void)
-{
-       char *s = getenv ("ram_addr");
-       if (s) {
-               ulong tmp = simple_strtoul (s, NULL, 16);
-               return tmp;
-       }
-       return 0 /*0x80a00000*/;
-}
-
-#endif
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv4518/config.mk
deleted file mode 100644 (file)
index c0e5d82..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Danube board with MIPS 24Kc CPU core
-#
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifdef CONFIG_LZMA_BOOTSTRAP
-
-ifdef BUILD_BOOTSTRAP
-
-$(info BUILD_BOOTSTRAP )
-#TEXT_BASE = 0xB0000000
-TEXT_BASE = 0x80010000
-
-else # BUILD_BOOTSTRAP
-
-ifndef TEXT_BASE
-$(info redefine TEXT_BASE = 0x80040000 )
-TEXT_BASE = 0x80040000
-endif
-
-endif # BUILD_BOOTSTRAP
-
-else
-
-ifdef BUILD_BOOTSTRAP
-$(error BUILD_BOOTSTRAP but not enabled in config)
-endif
-
-ifndef TEXT_BASE
-## Standard: boot from ebu
-$(info redefine TEXT_BASE = 0xB0000000 )
-TEXT_BASE = 0xB0000000
-## For testing: boot from RAM
-# TEXT_BASE = 0x80100000
-endif
-
-endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv4518/ddr_settings.h
deleted file mode 100644 (file)
index 4df6f11..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
-
-#define MC_DC0_VALUE   0x1B1B
-#define MC_DC1_VALUE   0x0
-#define MC_DC2_VALUE   0x0
-#define MC_DC3_VALUE   0x0
-#define MC_DC4_VALUE   0x0
-#define MC_DC5_VALUE   0x200
-#define MC_DC6_VALUE   0x605
-#define MC_DC7_VALUE   0x303
-#define MC_DC8_VALUE   0x102
-#define MC_DC9_VALUE   0x70a
-#define MC_DC10_VALUE  0x203
-#define MC_DC11_VALUE  0xc02
-#define MC_DC12_VALUE  0x1C8
-#define MC_DC13_VALUE  0x1
-#define MC_DC14_VALUE  0x0
-#define MC_DC15_VALUE  0x130  /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE  0xC800
-#define MC_DC17_VALUE  0xd
-#define MC_DC18_VALUE  0x301
-#define MC_DC19_VALUE  0x200
-#define MC_DC20_VALUE  0xA03  /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE  0x1b00
-#define MC_DC22_VALUE  0x1b1b
-#define MC_DC23_VALUE  0x0
-#define MC_DC24_VALUE  0x59   /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE  0x0
-#define MC_DC26_VALUE  0x0
-#define MC_DC27_VALUE  0x0
-#define MC_DC28_VALUE  0x510
-#define MC_DC29_VALUE  0x4e20
-#define MC_DC30_VALUE  0x8235
-#define MC_DC31_VALUE  0x0
-#define MC_DC32_VALUE  0x0
-#define MC_DC33_VALUE  0x0
-#define MC_DC34_VALUE  0x0
-#define MC_DC35_VALUE  0x0
-#define MC_DC36_VALUE  0x0
-#define MC_DC37_VALUE  0x0
-#define MC_DC38_VALUE  0x0
-#define MC_DC39_VALUE  0x0
-#define MC_DC40_VALUE  0x0
-#define MC_DC41_VALUE  0x0
-#define MC_DC42_VALUE  0x0
-#define MC_DC43_VALUE  0x0
-#define MC_DC44_VALUE  0x0
-#define MC_DC45_VALUE  0x500
-#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/lowlevel_init.S
deleted file mode 100644 (file)
index c4570d0..0000000
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- *  Memory sub-system initialization code for Danube board.
- *  Andre Messerschmidt
- *  Copyright (c) 2005 Infineon Technologies AG
- *
- *  Based on Inca-IP code
- *  Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/* History:
-      peng liu May 25, 2006, for PLL setting after reset, 05252006
- */
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-
-#if 0
-
-#if defined(CONFIG_USE_DDR_RAM)
-
-#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
-#include "ddr_settings_r111.h"
-#define DDR111
-#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
-#include "ddr_settings_r166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
-#include "ddr_settings_e111.h"
-#define DDR111
-#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
-#include "ddr_settings_e166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
-#include "ddr_settings_PROMOSDDR400.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
-#include "ddr_settings_Samsung_166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
-#include "ddr_settings_psc_166.h"
-#define DDR166
-#else
-#warning "missing definition for ddr_settings.h, use default!"
-#include "ddr_settings.h"
-#endif
-#endif /* CONFIG_USE_DDR_RAM */
-
-#else
-
-#include "ddr_settings.h"
-#define DDR166
-
-#endif
-
-#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
-#error "missing include of ddr_settings.h"
-#endif
-
-#define EBU_MODUL_BASE         0xBE105300
-#define EBU_CLC(value)         0x0000(value)
-#define EBU_CON(value)         0x0010(value)
-#define EBU_ADDSEL0(value)     0x0020(value)
-#define EBU_ADDSEL1(value)     0x0024(value)
-#define EBU_ADDSEL2(value)     0x0028(value)
-#define EBU_ADDSEL3(value)     0x002C(value)
-#define EBU_BUSCON0(value)     0x0060(value)
-#define EBU_BUSCON1(value)     0x0064(value)
-#define EBU_BUSCON2(value)     0x0068(value)
-#define EBU_BUSCON3(value)     0x006C(value)
-
-#define MC_MODUL_BASE          0xBF800000
-#define MC_ERRCAUSE(value)     0x0010(value)
-#define MC_ERRADDR(value)      0x0020(value)
-#define MC_CON(value)          0x0060(value)
-
-#define MC_SRAM_ENABLE         0x00000004
-#define MC_SDRAM_ENABLE                0x00000002
-#define MC_DDRRAM_ENABLE       0x00000001
-
-#define MC_SDR_MODUL_BASE      0xBF800200
-#define MC_IOGP(value)         0x0000(value)
-#define MC_CTRLENA(value)      0x0010(value)
-#define MC_MRSCODE(value)      0x0020(value)
-#define MC_CFGDW(value)                0x0030(value)
-#define MC_CFGPB0(value)       0x0040(value)
-#define MC_LATENCY(value)      0x0080(value)
-#define MC_TREFRESH(value)     0x0090(value)
-#define MC_SELFRFSH(value)     0x00A0(value)
-
-#define MC_DDR_MODUL_BASE      0xBF801000
-#define MC_DC00(value)         0x0000(value)
-#define MC_DC01(value)         0x0010(value)
-#define MC_DC02(value)         0x0020(value)
-#define MC_DC03(value)         0x0030(value)
-#define MC_DC04(value)         0x0040(value)
-#define MC_DC05(value)         0x0050(value)
-#define MC_DC06(value)         0x0060(value)
-#define MC_DC07(value)         0x0070(value)
-#define MC_DC08(value)         0x0080(value)
-#define MC_DC09(value)         0x0090(value)
-#define MC_DC10(value)         0x00A0(value)
-#define MC_DC11(value)         0x00B0(value)
-#define MC_DC12(value)         0x00C0(value)
-#define MC_DC13(value)         0x00D0(value)
-#define MC_DC14(value)         0x00E0(value)
-#define MC_DC15(value)         0x00F0(value)
-#define MC_DC16(value)         0x0100(value)
-#define MC_DC17(value)         0x0110(value)
-#define MC_DC18(value)         0x0120(value)
-#define MC_DC19(value)         0x0130(value)
-#define MC_DC20(value)         0x0140(value)
-#define MC_DC21(value)         0x0150(value)
-#define MC_DC22(value)         0x0160(value)
-#define MC_DC23(value)         0x0170(value)
-#define MC_DC24(value)         0x0180(value)
-#define MC_DC25(value)         0x0190(value)
-#define MC_DC26(value)         0x01A0(value)
-#define MC_DC27(value)         0x01B0(value)
-#define MC_DC28(value)         0x01C0(value)
-#define MC_DC29(value)         0x01D0(value)
-#define MC_DC30(value)         0x01E0(value)
-#define MC_DC31(value)         0x01F0(value)
-#define MC_DC32(value)         0x0200(value)
-#define MC_DC33(value)         0x0210(value)
-#define MC_DC34(value)         0x0220(value)
-#define MC_DC35(value)         0x0230(value)
-#define MC_DC36(value)         0x0240(value)
-#define MC_DC37(value)         0x0250(value)
-#define MC_DC38(value)         0x0260(value)
-#define MC_DC39(value)         0x0270(value)
-#define MC_DC40(value)         0x0280(value)
-#define MC_DC41(value)         0x0290(value)
-#define MC_DC42(value)         0x02A0(value)
-#define MC_DC43(value)         0x02B0(value)
-#define MC_DC44(value)         0x02C0(value)
-#define MC_DC45(value)         0x02D0(value)
-#define MC_DC46(value)         0x02E0(value)
-
-#define RCU_OFFSET  0xBF203000
-#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
-#define RCU_STS          (RCU_OFFSET + 0x0014)
-
-#define CGU_OFFSET  0xBF103000
-#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
-#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
-#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
-#define  CGU_SYS      (CGU_OFFSET + 0x0010)
-#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
-#define  IF_CLK       (CGU_OFFSET + 0x0018)
-#define  CGU_SMD      (CGU_OFFSET + 0x0020)
-#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
-#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
-#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
-#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
-#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
-#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
-#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
-
-//05252006
-#define  pll0_35MHz_CONFIG 0x9D861059
-#define  pll1_35MHz_CONFIG 0x1A260CD9
-#define  pll2_35MHz_CONFIG 0x8000f1e5
-#define  pll0_36MHz_CONFIG 0x1000125D
-#define  pll1_36MHz_CONFIG 0x1B1E0C99
-#define  pll2_36MHz_CONFIG 0x8002f2a1
-//05252006
-
-//06063001-joelin disable the PCI CFRAME mask -start
-/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
-But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
-
-The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
-The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
-*/
-#define PCI_CR_PR_OFFSET  0xBE105400
-#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
-#define PCI_CONFIG_SPACE  0xB7000000
-#define CS_CFM         (PCI_CONFIG_SPACE + 0x6C)
-//06063001-joelin disable the PCI CFRAME mask -end
-       .set    noreorder
-
-
-/*
- * void ebu_init(void)
- */
-       .globl  ebu_init
-       .ent    ebu_init
-ebu_init:
-
-#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
-       defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
-       defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
-       defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
-
-       li      t1, EBU_MODUL_BASE
-#if defined(CONFIG_EBU_ADDSEL0)
-       li      t2, CONFIG_EBU_ADDSEL0
-       sw      t2, EBU_ADDSEL0(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL1)
-       li      t2, CONFIG_EBU_ADDSEL1
-       sw      t2, EBU_ADDSEL1(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL2)
-       li      t2, CONFIG_EBU_ADDSEL2
-       sw      t2, EBU_ADDSEL2(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL3)
-       li      t2, CONFIG_EBU_ADDSEL3
-       sw      t2, EBU_ADDSEL3(t1)
-#endif
-
-#if defined(CONFIG_EBU_BUSCON0)
-       li      t2, CONFIG_EBU_BUSCON0
-       sw      t2, EBU_BUSCON0(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON1)
-       li      t2, CONFIG_EBU_BUSCON1
-       sw      t2, EBU_BUSCON1(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON2)
-       li      t2, CONFIG_EBU_BUSCON2
-       sw      t2, EBU_BUSCON2(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON3)
-       li      t2, CONFIG_EBU_BUSCON3
-       sw      t2, EBU_BUSCON3(t1)
-#endif
-
-#endif
-
-       j       ra
-       nop
-
-       .end    ebu_init
-
-
-/*
- * void cgu_init(long)
- *
- * a0 has the clock value
- */
-       .globl  cgu_init
-       .ent    cgu_init
-cgu_init:
-       li  t2, CGU_SYS
-       lw  t2,0(t2)
-       beq t2,a0,freq_up2date
-       nop
-
-       li  t2, RCU_STS
-       lw  t2, 0(t2)
-       and t2,0x00020000
-       beq t2,0x00020000,boot_36MHZ
-       nop
-//05252006
-       li  t1, PLL0_CFG
-       li  t2, pll0_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL1_CFG
-       li  t2, pll1_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL2_CFG
-       li  t2, pll2_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, CGU_SYS
-       sw      a0,0(t1)
-       li  t1, RCU_RST_REQ
-       li  t2, 0x40000008
-       sw      t2,0(t1)
-       b   wait_reset
-       nop
-boot_36MHZ:
-       li  t1, PLL0_CFG
-       li  t2, pll0_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL1_CFG
-       li  t2, pll1_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL2_CFG
-       li  t2, pll2_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, CGU_SYS
-       sw      a0,0(t1)
-       li  t1, RCU_RST_REQ
-       li  t2, 0x40000008
-       sw      t2,0(t1)
-//05252006
-
-wait_reset:
-       b   wait_reset
-       nop
-freq_up2date:
-       j ra
-       nop
-
-       .end    cgu_init
-
-#ifndef CONFIG_USE_DDR_RAM
-/*
- * void sdram_init(long)
- *
- * a0 has the clock value
- */
-       .globl  sdram_init
-       .ent    sdram_init
-sdram_init:
-
-       /* SDRAM Initialization
-        */
-       li      t1, MC_MODUL_BASE
-
-       /* Clear Error log registers */
-       sw      zero, MC_ERRCAUSE(t1)
-       sw      zero, MC_ERRADDR(t1)
-
-       /* Enable SDRAM module in memory controller */
-       li      t3, MC_SDRAM_ENABLE
-       lw      t2, MC_CON(t1)
-       or      t3, t2, t3
-       sw      t3, MC_CON(t1)
-
-       li      t1, MC_SDR_MODUL_BASE
-
-       /* disable the controller */
-       li      t2, 0
-       sw      t2, MC_CTRLENA(t1)
-
-       li      t2, 0x822
-       sw      t2, MC_IOGP(t1)
-
-       li      t2, 0x2
-       sw      t2, MC_CFGDW(t1)
-
-       /* Set CAS Latency */
-       li      t2, 0x00000020
-       sw      t2, MC_MRSCODE(t1)
-
-       /* Set CS0 to SDRAM parameters */
-       li      t2, 0x000014d8
-       sw      t2, MC_CFGPB0(t1)
-
-       /* Set SDRAM latency parameters */
-       li      t2, 0x00036325;   /* BC PC100 */
-       sw      t2, MC_LATENCY(t1)
-
-       /* Set SDRAM refresh rate */
-       li      t2, 0x00000C30
-       sw      t2, MC_TREFRESH(t1)
-
-       /* Clear Power-down registers */
-       sw      zero, MC_SELFRFSH(t1)
-
-       /* Finally enable the controller */
-       li      t2, 1
-       sw      t2, MC_CTRLENA(t1)
-
-       j       ra
-       nop
-
-       .end    sdram_init
-
-#endif /* !CONFIG_USE_DDR_RAM */
-
-#ifdef CONFIG_USE_DDR_RAM
-/*
- * void ddrram_init(long)
- *
- * a0 has the clock value
- */
-       .globl  ddrram_init
-       .ent    ddrram_init
-ddrram_init:
-
-       /* DDR-DRAM Initialization
-        */
-       li      t1, MC_MODUL_BASE
-
-       /* Clear Error log registers */
-       sw      zero, MC_ERRCAUSE(t1)
-       sw      zero, MC_ERRADDR(t1)
-
-       /* Enable DDR module in memory controller */
-       li      t3, MC_DDRRAM_ENABLE
-       lw      t2, MC_CON(t1)
-       or      t3, t2, t3
-       sw      t3, MC_CON(t1)
-
-       li      t1, MC_DDR_MODUL_BASE
-
-       /* Write configuration to DDR controller registers */
-       li      t2, MC_DC0_VALUE
-       sw      t2, MC_DC00(t1)
-
-       li      t2, MC_DC1_VALUE
-       sw      t2, MC_DC01(t1)
-
-       li      t2, MC_DC2_VALUE
-       sw      t2, MC_DC02(t1)
-
-       li      t2, MC_DC3_VALUE
-       sw      t2, MC_DC03(t1)
-
-       li      t2, MC_DC4_VALUE
-       sw      t2, MC_DC04(t1)
-
-       li      t2, MC_DC5_VALUE
-       sw      t2, MC_DC05(t1)
-
-       li      t2, MC_DC6_VALUE
-       sw      t2, MC_DC06(t1)
-
-       li      t2, MC_DC7_VALUE
-       sw      t2, MC_DC07(t1)
-
-       li      t2, MC_DC8_VALUE
-       sw      t2, MC_DC08(t1)
-
-       li      t2, MC_DC9_VALUE
-       sw      t2, MC_DC09(t1)
-
-       li      t2, MC_DC10_VALUE
-       sw      t2, MC_DC10(t1)
-
-       li      t2, MC_DC11_VALUE
-       sw      t2, MC_DC11(t1)
-
-       li      t2, MC_DC12_VALUE
-       sw      t2, MC_DC12(t1)
-
-       li      t2, MC_DC13_VALUE
-       sw      t2, MC_DC13(t1)
-
-       li      t2, MC_DC14_VALUE
-       sw      t2, MC_DC14(t1)
-
-       li      t2, MC_DC15_VALUE
-       sw      t2, MC_DC15(t1)
-
-       li      t2, MC_DC16_VALUE
-       sw      t2, MC_DC16(t1)
-
-       li      t2, MC_DC17_VALUE
-       sw      t2, MC_DC17(t1)
-
-       li      t2, MC_DC18_VALUE
-       sw      t2, MC_DC18(t1)
-
-       li      t2, MC_DC19_VALUE
-       sw      t2, MC_DC19(t1)
-
-       li      t2, MC_DC20_VALUE
-       sw      t2, MC_DC20(t1)
-
-       li      t2, MC_DC21_VALUE
-       sw      t2, MC_DC21(t1)
-
-       li      t2, MC_DC22_VALUE
-       sw      t2, MC_DC22(t1)
-
-       li      t2, MC_DC23_VALUE
-       sw      t2, MC_DC23(t1)
-
-       li      t2, MC_DC24_VALUE
-       sw      t2, MC_DC24(t1)
-
-       li      t2, MC_DC25_VALUE
-       sw      t2, MC_DC25(t1)
-
-       li      t2, MC_DC26_VALUE
-       sw      t2, MC_DC26(t1)
-
-       li      t2, MC_DC27_VALUE
-       sw      t2, MC_DC27(t1)
-
-       li      t2, MC_DC28_VALUE
-       sw      t2, MC_DC28(t1)
-
-       li      t2, MC_DC29_VALUE
-       sw      t2, MC_DC29(t1)
-
-       li      t2, MC_DC30_VALUE
-       sw      t2, MC_DC30(t1)
-
-       li      t2, MC_DC31_VALUE
-       sw      t2, MC_DC31(t1)
-
-       li      t2, MC_DC32_VALUE
-       sw      t2, MC_DC32(t1)
-
-       li      t2, MC_DC33_VALUE
-       sw      t2, MC_DC33(t1)
-
-       li      t2, MC_DC34_VALUE
-       sw      t2, MC_DC34(t1)
-
-       li      t2, MC_DC35_VALUE
-       sw      t2, MC_DC35(t1)
-
-       li      t2, MC_DC36_VALUE
-       sw      t2, MC_DC36(t1)
-
-       li      t2, MC_DC37_VALUE
-       sw      t2, MC_DC37(t1)
-
-       li      t2, MC_DC38_VALUE
-       sw      t2, MC_DC38(t1)
-
-       li      t2, MC_DC39_VALUE
-       sw      t2, MC_DC39(t1)
-
-       li      t2, MC_DC40_VALUE
-       sw      t2, MC_DC40(t1)
-
-       li      t2, MC_DC41_VALUE
-       sw      t2, MC_DC41(t1)
-
-       li      t2, MC_DC42_VALUE
-       sw      t2, MC_DC42(t1)
-
-       li      t2, MC_DC43_VALUE
-       sw      t2, MC_DC43(t1)
-
-       li      t2, MC_DC44_VALUE
-       sw      t2, MC_DC44(t1)
-
-       li      t2, MC_DC45_VALUE
-       sw      t2, MC_DC45(t1)
-
-       li      t2, MC_DC46_VALUE
-       sw      t2, MC_DC46(t1)
-
-       li      t2, 0x00000100
-       sw      t2, MC_DC03(t1)
-
-       j       ra
-       nop
-
-       .end    ddrram_init
-#endif /* CONFIG_USE_DDR_RAM */
-
-       .globl  lowlevel_init
-       .ent    lowlevel_init
-lowlevel_init:
-       /* EBU, CGU and SDRAM/DDR-RAM Initialization.
-        */
-       move    t0, ra
-       /* We rely on the fact that non of the following ..._init() functions
-        * modify t0
-        */
-#if defined(CONFIG_SYS_EBU_BOOT)
-#if defined(DDR166)
-       /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
-       li  a0,0xe8
-#elif defined(DDR133)
-       /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
-       li  a0,0xe9
-#else /* defined(DDR111) */
-       /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
-       li  a0,0xea
-#endif
-       bal     cgu_init
-       nop
-#endif /* CONFIG_SYS_EBU_BOOT */
-
-       bal     ebu_init
-       nop
-
-//06063001-joelin disable the PCI CFRAME mask-start
-#ifdef DISABLE_CFRAME
-       li  t1, PCI_CR_PCI      //mw bf103034 80000000
-       li  t2, 0x80000000
-       sw      t2,0(t1)
-
-       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
-       li  t2, 0x103
-       sw  t2,0(t1)
-
-       li  t1, CS_CFM                  //mw b700006c 0
-       li  t2, 0x00
-       sw  t2, 0(t1)
-
-       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
-       li  t2, 0x1000103
-       sw  t2, 0(t1)
-#endif
-//06063001-joelin disable the PCI CFRAME mask-end
-
-#ifdef CONFIG_SYS_EBU_BOOT
-#ifndef CONFIG_SYS_RAMBOOT
-#ifdef CONFIG_USE_DDR_RAM
-       bal     ddrram_init
-       nop
-#else
-       bal     sdram_init
-       nop
-#endif
-#endif /* CONFIG_SYS_RAMBOOT */
-#endif /* CONFIG_SYS_EBU_BOOT */
-
-       move    ra, t0
-       j       ra
-       nop
-
-       .end    lowlevel_init
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv4518/pmuenable.S
deleted file mode 100644 (file)
index e0d7971..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Power Management unit initialization code for AMAZON development board.
- *
- *  Copyright (c) 2003 Ou Ke, Infineon.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-
-#define PMU_PWDCR              0xBF10201C
-#define PMU_SR                 0xBF102020
-
-       .globl  pmuenable
-
-pmuenable:
-       li      t0, PMU_PWDCR
-       li      t1, 0x2         /* enable everything */
-       sw      t1, 0(t0)
-#if 0
-1:
-       li      t0, PMU_SR
-       lw      t2, 0(t0)
-       bne     t1, t2, 1b
-       nop
-#endif
-       j       ra
-       nop
-
-
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv4518/u-boot.lds
deleted file mode 100644 (file)
index 9a6cd1b..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-       . = 0x00000000;
-
-       . = ALIGN(4);
-       .text       :
-       {
-         *(.text)
-       }
-
-       . = ALIGN(4);
-       .rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-       . = ALIGN(4);
-       .data  : { *(.data) }
-
-       . = .;
-       _gp = ALIGN(16) + 0x7ff0;
-
-       .got : {
-         __got_start = .;
-         *(.got)
-         __got_end = .;
-       }
-
-       .sdata  : { *(.sdata) }
-
-       .u_boot_cmd : {
-         __u_boot_cmd_start = .;
-         *(.u_boot_cmd)
-         __u_boot_cmd_end = .;
-       }
-
-       uboot_end_data = .;
-       num_got_entries = (__got_end - __got_start) >> 2;
-
-       . = ALIGN(4);
-       .sbss (NOLOAD)  : { *(.sbss) }
-       .bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
-       uboot_end = .;
-}
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/Makefile
deleted file mode 100644 (file)
index 2d0115f..0000000
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB    = $(obj)lib$(BOARD).a
-
-#COBJS := $(BOARD).o
-COBJS-y        += arv752.o athrs26_phy.o
-
-SOBJS  = lowlevel_init.o pmuenable.o
-
-SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS-y))
-SOBJS  := $(addprefix $(obj),$(SOBJS))
-
-$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
-       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/arv752.c
deleted file mode 100644 (file)
index 5b68de9..0000000
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2010
- * Thomas Langer, Ralph Hempel
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <miiphy.h>
-#include <asm/addrspace.h>
-#include <asm/danube.h>
-#include <asm/reboot.h>
-#include <asm/io.h>
-#if defined(CONFIG_CMD_HTTPD)
-#include <httpd.h>
-#endif
-#if defined(CONFIG_PCI)
-#include <pci.h>
-#endif
-#include "athrs26_phy.h"
-
-extern ulong ifx_get_ddr_hz(void);
-extern ulong ifx_get_cpuclk(void);
-
-/* IDs and registers of known external switches */
-void _machine_restart(void)
-{
-       *DANUBE_RCU_RST_REQ |=1<<30;
-}
-
-#ifdef CONFIG_SYS_RAMBOOT
-phys_size_t initdram(int board_type)
-{
-       return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
-}
-#elif defined(CONFIG_USE_DDR_RAM)
-phys_size_t initdram(int board_type)
-{
-       return (CONFIG_SYS_MAX_RAM);
-}
-#else
-
-static ulong max_sdram_size(void)     /* per Chip Select */
-{
-       /* The only supported SDRAM data width is 16bit.
-        */
-#define CFG_DW 4
-
-       /* The only supported number of SDRAM banks is 4.
-        */
-#define CFG_NB 4
-
-       ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
-       int   cols   = cfgpb0 & 0xF;
-       int   rows   = (cfgpb0 & 0xF0) >> 4;
-       ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
-
-       return size;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'.
- */
-
-static long int dram_size(long int *base, long int maxsize)
-{
-       volatile long int *addr;
-       ulong cnt, val;
-       ulong save[32];                 /* to make test non-destructive */
-       unsigned char i = 0;
-
-       for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
-               addr = base + cnt;              /* pointer arith! */
-
-               save[i++] = *addr;
-               *addr = ~cnt;
-       }
-
-       /* write 0 to base address */
-       addr = base;
-       save[i] = *addr;
-       *addr = 0;
-
-       /* check at base address */
-       if ((val = *addr) != 0) {
-               *addr = save[i];
-               return (0);
-       }
-
-       for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
-               addr = base + cnt;              /* pointer arith! */
-
-               val = *addr;
-               *addr = save[--i];
-
-               if (val != (~cnt)) {
-                       return (cnt * sizeof (long));
-               }
-       }
-       return (maxsize);
-}
-
-phys_size_t initdram(int board_type)
-{
-       int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
-       ulong size, max_size       = 0;
-       ulong our_address;
-
-       /* load t9 into our_address */
-       asm volatile ("move %0, $25" : "=r" (our_address) :);
-
-       /* Can't probe for RAM size unless we are running from Flash.
-        * find out whether running from DRAM or Flash.
-        */
-       if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
-       {
-               return max_sdram_size();
-       }
-
-       for (cols = 0x8; cols <= 0xC; cols++)
-       {
-               for (rows = 0xB; rows <= 0xD; rows++)
-               {
-                       *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
-                                                 (rows << 4) | cols;
-                       size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-                                                 max_sdram_size());
-
-                       if (size > max_size)
-                       {
-                               best_val = *DANUBE_SDRAM_MC_CFGPB0;
-                               max_size = size;
-                       }
-               }
-       }
-
-       *DANUBE_SDRAM_MC_CFGPB0 = best_val;
-       return max_size;
-}
-#endif
-
-int checkboard (void)
-{
-       unsigned long chipid = *DANUBE_MPS_CHIPID;
-       int part_num;
-
-       puts ("Board: ARV75DW22 - Easybox 803\n");
-       puts ("SoC: ");
-
-       part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
-       switch (part_num)
-       {
-       case 0x129:
-       case 0x12D:
-       case 0x12b: 
-               puts("Danube/Twinpass/Vinax-VE ");
-               break;
-       default:
-               printf ("unknown, chip part number 0x%03X ", part_num);
-               break;
-       }
-       printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
-
-       printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
-       printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
-
-       return 0;
-}
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-int board_early_init_f(void)
-{
-#ifdef CONFIG_EBU_ADDSEL0
-       (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
-#endif
-#ifdef CONFIG_EBU_ADDSEL1
-       (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
-#endif
-#ifdef CONFIG_EBU_ADDSEL2
-       (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
-#endif
-#ifdef CONFIG_EBU_ADDSEL3
-       (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
-#endif
-#ifdef CONFIG_EBU_BUSCON0
-       (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
-#endif
-#ifdef CONFIG_EBU_BUSCON1
-       (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
-#endif
-#ifdef CONFIG_EBU_BUSCON2
-       (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
-#endif
-#ifdef CONFIG_EBU_BUSCON3
-       (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
-#endif
-
-       return 0;
-}
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-
-#ifdef CONFIG_EXTRA_SWITCH
-static int external_switch_init(void)
-{
-       // switch reset pin on arv752
-       *DANUBE_GPIO_P1_ALTSEL0 &= ~8;
-       *DANUBE_GPIO_P1_ALTSEL1 &= ~8;
-       *DANUBE_GPIO_P1_OD |= 8;
-       *DANUBE_GPIO_P1_DIR |= 8;
-       *DANUBE_GPIO_P1_OUT |= 8;
-
-       puts("initializing ar8216 switch... ");
-       if (athrs26_phy_setup(0)==0) {
-          printf("initialized\n");
-          return 0;
-       }
-       puts("failed ... \n");
-       return 0;
-}
-#endif /* CONFIG_EXTRA_SWITCH */
-
-int board_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_IFX_ETOP)
-       uchar enetaddr[6];
-       if (!eth_getenv_enetaddr("ethaddr", enetaddr))
-               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
-
-       *DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
-       *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
-
-       if (lq_eth_initialize(bis))
-               return -1;
-
-       *DANUBE_RCU_RST_REQ |=1;
-       udelay(200000);
-       *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
-       udelay(1000);
-
-#ifdef CONFIG_EXTRA_SWITCH
-       if (external_switch_init()<0)
-               return -1;
-#endif /* CONFIG_EXTRA_SWITCH */
-#endif /* CONFIG_IFX_ETOP */
-
-       return 0;
-}
-
-#if defined(CONFIG_CMD_HTTPD)
-int do_http_upgrade(const unsigned char *data, const ulong size)
-{
-       char buf[128];
-
-       if(getenv ("ram_addr") == NULL)
-               return -1;
-       if(getenv ("kernel_addr") == NULL)
-               return -1;
-       /* check the image */
-       if(run_command("imi ${ram_addr}", 0) < 0) {
-               return -1;
-       }
-       /* write the image to the flash */
-       puts("http ugrade ...\n");
-       sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
-       return run_command(buf, 0);
-}
-
-int do_http_progress(const int state)
-{
-       /* toggle LED's here */
-       switch(state) {
-               case HTTP_PROGRESS_START:
-               puts("http start\n");
-               break;
-               case HTTP_PROGRESS_TIMEOUT:
-               puts(".");
-               break;
-               case HTTP_PROGRESS_UPLOAD_READY:
-               puts("http upload ready\n");
-               break;
-               case HTTP_PROGRESS_UGRADE_READY:
-               puts("http ugrade ready\n");
-               break;
-               case HTTP_PROGRESS_UGRADE_FAILED:
-               puts("http ugrade failed\n");
-               break;
-       }
-       return 0;
-}
-
-unsigned long do_http_tmp_address(void)
-{
-       char *s = getenv ("ram_addr");
-       if (s) {
-               ulong tmp = simple_strtoul (s, NULL, 16);
-               return tmp;
-       }
-       return 0 /*0x80a00000*/;
-}
-
-#endif
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.c
deleted file mode 100644 (file)
index 2f80ee0..0000000
+++ /dev/null
@@ -1,814 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
- */
-
-/*
- * Manage the atheros ethernet PHY.
- *
- * All definitions in this file are operating system independent!
- */
-
-#include <config.h>
-#include <linux/types.h>
-#include <common.h>
-#include <miiphy.h>
-//#include "phy.h"
-//#include "ar7100_soc.h"
-#include "athrs26_phy.h"
-
-#define phy_reg_read(base, addr, reg, datap)                    \
-    miiphy_read("lq_cpe_eth", addr, reg, datap);
-#define phy_reg_write(base, addr, reg, data)                   \
-    miiphy_write("lq_cpe_eth", addr, reg, data);
-            
-
-/* PHY selections and access functions */
-
-typedef enum {
-    PHY_SRCPORT_INFO, 
-    PHY_PORTINFO_SIZE,
-} PHY_CAP_TYPE;
-
-typedef enum {
-    PHY_SRCPORT_NONE,
-    PHY_SRCPORT_VLANTAG, 
-    PHY_SRCPORT_TRAILER,
-} PHY_SRCPORT_TYPE;
-
-#ifdef DEBUG
-#define DRV_DEBUG 1
-#endif
-//#define DRV_DEBUG 1
-
-#define DRV_DEBUG_PHYERROR  0x00000001
-#define DRV_DEBUG_PHYCHANGE 0x00000002
-#define DRV_DEBUG_PHYSETUP  0x00000004
-
-#if DRV_DEBUG
-int athrPhyDebug = DRV_DEBUG_PHYERROR|DRV_DEBUG_PHYCHANGE|DRV_DEBUG_PHYSETUP;
-
-#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6)    \
-{                                                   \
-    if (athrPhyDebug & (FLG)) {                       \
-        logMsg(X0, X1, X2, X3, X4, X5, X6);         \
-    }                                               \
-}
-
-#define DRV_MSG(x,a,b,c,d,e,f)                      \
-    logMsg(x,a,b,c,d,e,f)
-
-#define DRV_PRINT(FLG, X)                           \
-{                                                   \
-    if (athrPhyDebug & (FLG)) {                       \
-        printf X;                                   \
-    }                                               \
-}
-
-#else /* !DRV_DEBUG */
-#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6)
-#define DRV_MSG(x,a,b,c,d,e,f)
-#define DRV_PRINT(DBG_SW,X)
-#endif
-
-#define ATHR_LAN_PORT_VLAN          1
-#define ATHR_WAN_PORT_VLAN          2
-
-#define ENET_UNIT_LAN 0
-
-#define TRUE    1
-#define FALSE   0
-
-#define ATHR_PHY0_ADDR   0x0
-#define ATHR_PHY1_ADDR   0x1
-#define ATHR_PHY2_ADDR   0x2
-#define ATHR_PHY3_ADDR   0x3
-#define ATHR_PHY4_ADDR   0x4
-
-/*
- * Track per-PHY port information.
- */
-typedef struct {
-    BOOL   isEnetPort;       /* normal enet port */
-    BOOL   isPhyAlive;       /* last known state of link */
-    int    ethUnit;          /* MAC associated with this phy port */
-    uint32_t phyBase;
-    uint32_t phyAddr;          /* PHY registers associated with this phy port */
-    uint32_t VLANTableSetting; /* Value to be written to VLAN table */
-} athrPhyInfo_t;
-
-/*
- * Per-PHY information, indexed by PHY unit number.
- */
-static athrPhyInfo_t athrPhyInfo[] = {
-    {TRUE,   /* phy port 0 -- LAN port 0 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY0_ADDR,
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 1 -- LAN port 1 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY1_ADDR,
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 2 -- LAN port 2 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY2_ADDR, 
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 3 -- LAN port 3 */
-     FALSE,
-     ENET_UNIT_LAN,
-     0,
-     ATHR_PHY3_ADDR, 
-     ATHR_LAN_PORT_VLAN
-    },
-
-    {TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
-     FALSE,
-     1,
-     0,
-     ATHR_PHY4_ADDR, 
-     ATHR_LAN_PORT_VLAN   /* Send to all ports */
-    },
-
-    {FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
-     TRUE,
-     ENET_UNIT_LAN,
-     0,
-     0x00, 
-     ATHR_LAN_PORT_VLAN    /* Send to all ports */
-    },
-};
-
-#ifdef CFG_ATHRHDR_EN
-typedef struct {
-    uint8_t data[ATHRHDR_MAX_DATA];
-    uint8_t len;
-    uint32_t seq;
-} cmd_resp_t;
-
-typedef struct {
- uint16_t reg_addr;
- uint16_t cmd_len;
- uint8_t *reg_data;
-}cmd_write_t;
-
-static cmd_write_t cmd_write,cmd_read;
-static cmd_resp_t cmd_resp;
-static struct eth_device *lan_mac;
-//static atomic_t seqcnt = ATOMIC_INIT(0);
-static int  seqcnt = 0;
-static int cmd = 1;
-//volatile uchar AthrHdrPkt[60];
-#endif
-
-#define ATHR_GLOBALREGBASE    0
-
-//#define ATHR_PHY_MAX (sizeof(athrPhyInfo) / sizeof(athrPhyInfo[0]))
-#define ATHR_PHY_MAX 5
-
-/* Range of valid PHY IDs is [MIN..MAX] */
-#define ATHR_ID_MIN 0
-#define ATHR_ID_MAX (ATHR_PHY_MAX-1)
-
-/* Convenience macros to access myPhyInfo */
-#define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort)
-#define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive)
-#define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit)
-#define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase)
-#define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr)
-#define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting)
-
-
-#define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \
-            (ATHR_IS_ENET_PORT(phyUnit) &&        \
-            ATHR_ETHUNIT(phyUnit) == (ethUnit))
-
-#define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN))
-            
-/* Forward references */
-BOOL       athrs26_phy_is_link_alive(int phyUnit);
-static uint32_t athrs26_reg_read(uint16_t reg_addr);
-static void athrs26_reg_write(uint16_t reg_addr, 
-                              uint32_t reg_val);
-
-/******************************************************************************
-*
-* athrs26_phy_is_link_alive - test to see if the specified link is alive
-*
-* RETURNS:
-*    TRUE  --> link is alive
-*    FALSE --> link is down
-*/
-
-void athrs26_reg_init()
-{
-
-    athrs26_reg_write(0x200, 0x200);
-    athrs26_reg_write(0x300, 0x200);
-    athrs26_reg_write(0x400, 0x200);
-    athrs26_reg_write(0x500, 0x200);
-    athrs26_reg_write(0x600, 0x7d);
-
-#ifdef S26_VER_1_0
-    phy_reg_write(0, 0, 29, 41);
-    phy_reg_write(0, 0, 30, 0);
-    phy_reg_write(0, 1, 29, 41);
-    phy_reg_write(0, 1, 30, 0);
-    phy_reg_write(0, 2, 29, 41);
-    phy_reg_write(0, 2, 30, 0);
-    phy_reg_write(0, 3, 29, 41);
-    phy_reg_write(0, 3, 30, 0);
-    phy_reg_write(0, 4, 29, 41);
-    phy_reg_write(0, 4, 30, 0);
-#endif
-
-    athrs26_reg_write(0x38, 0xc000050e);
-
-#ifdef CFG_ATHRHDR_EN
-    athrs26_reg_write(0x104, 0x4804);
-#else
-    athrs26_reg_write(0x104, 0x4004);
-#endif
-
-    athrs26_reg_write(0x60, 0xffffffff);
-    athrs26_reg_write(0x64, 0xaaaaaaaa);
-    athrs26_reg_write(0x68, 0x55555555);
-    athrs26_reg_write(0x6c, 0x0);
-
-    athrs26_reg_write(0x70, 0x41af);
-}
-
-BOOL
-athrs26_phy_is_link_alive(int phyUnit)
-{
-    uint16_t phyHwStatus;
-    uint32_t phyBase;
-    uint32_t phyAddr;
-
-    phyBase = ATHR_PHYBASE(phyUnit);
-    phyAddr = ATHR_PHYADDR(phyUnit);
-
-    phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-
-    if (phyHwStatus & ATHR_STATUS_LINK_PASS)
-        return TRUE;
-
-    return FALSE;
-}
-
-
-/******************************************************************************
-*
-* athrs26_phy_setup - reset and setup the PHY associated with
-* the specified MAC unit number.
-*
-* Resets the associated PHY port.
-*
-* RETURNS:
-*    TRUE  --> associated PHY is alive
-*    FALSE --> no LINKs on this ethernet unit
-*/
-
-BOOL
-athrs26_phy_setup(int ethUnit)
-{
-    int         phyUnit;
-    uint16_t    phyHwStatus;
-    uint16_t    timeout;
-    int         liveLinks = 0;
-    uint32_t    phyBase = 0;
-    BOOL        foundPhy = FALSE;
-    uint32_t  phyAddr = 0;
-    uint32_t  regVal;
-    
-
-    /* See if there's any configuration data for this enet */
-    /* start auto negogiation on each phy */
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-                       continue;
-        }
-
-
-        foundPhy = TRUE;
-        phyBase = ATHR_PHYBASE(phyUnit);
-        phyAddr = ATHR_PHYADDR(phyUnit);
-
-        phy_reg_write(phyBase, phyAddr, ATHR_AUTONEG_ADVERT,
-                      ATHR_ADVERTISE_ALL);
-
-        /* Reset PHYs*/
-        phy_reg_write(phyBase, phyAddr, ATHR_PHY_CONTROL,
-                      ATHR_CTRL_AUTONEGOTIATION_ENABLE
-                      | ATHR_CTRL_SOFTWARE_RESET);
-
-       }
-
-    if (!foundPhy) {
-        return FALSE; /* No PHY's configured for this ethUnit */
-    }
-
-    /*
-     * After the phy is reset, it takes a little while before
-     * it can respond properly.
-     */
-    sysMsDelay(1000);
-    
-    /*
-     * Wait up to .75 seconds for ALL associated PHYs to finish
-     * autonegotiation.  The only way we get out of here sooner is
-     * if ALL PHYs are connected AND finish autonegotiation.
-     */
-    for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        timeout=20;
-        for (;;) {
-                       phyHwStatus = 0;
-            phy_reg_read(phyBase, phyAddr, ATHR_PHY_CONTROL, &phyHwStatus);
-
-               if (ATHR_RESET_DONE(phyHwStatus)) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Neg Success\n", phyUnit));
-                break;
-            }
-            if (timeout == 0) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Negogiation timeout\n", phyUnit));
-                break;
-            }
-            if (--timeout == 0) {
-                DRV_PRINT(DRV_DEBUG_PHYSETUP,
-                          ("Port %d, Negogiation timeout\n", phyUnit));
-                break;
-            }
-
-            sysMsDelay(150);
-        }
-    }
-
-       /*
-     * All PHYs have had adequate time to autonegotiate.
-     * Now initialize software status.
-     *
-     * It's possible that some ports may take a bit longer
-     * to autonegotiate; but we can't wait forever.  They'll
-     * get noticed by mv_phyCheckStatusChange during regular
-     * polling activities.
-     */
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-            liveLinks++;
-            ATHR_IS_PHY_ALIVE(phyUnit) = TRUE;
-        } else {
-            ATHR_IS_PHY_ALIVE(phyUnit) = FALSE;
-        }
-
-        phy_reg_read(ATHR_PHYBASE(phyUnit), ATHR_PHYADDR(phyUnit), 
-                    ATHR_PHY_SPEC_STATUS, &regVal);
-        DRV_PRINT(DRV_DEBUG_PHYSETUP,
-            ("eth%d: Phy Specific Status=%4.4x\n", ethUnit, regVal)); 
-    }
-#if 0
-    /* if using header for register configuration, we have to     */
-    /* configure s26 register after frame transmission is enabled */
-
-    athrs26_reg_write(0x200, 0x200);
-    athrs26_reg_write(0x300, 0x200);
-    athrs26_reg_write(0x400, 0x200);
-    athrs26_reg_write(0x500, 0x200);
-    athrs26_reg_write(0x600, 0x200);
-       athrs26_reg_write(0x38, 0x50e);
-#endif
-#ifndef CFG_ATHRHDR_EN       
-/* if using header for register configuration, we have to     */
-    /* configure s26 register after frame transmission is enabled */
-        athrs26_reg_init();
-#endif
-    
-    return (liveLinks > 0);
-}
-
-/******************************************************************************
-*
-* athrs26_phy_is_fdx - Determines whether the phy ports associated with the
-* specified device are FULL or HALF duplex.
-*
-* RETURNS:
-*    1  --> FULL
-*    0 --> HALF
-*/
-int
-athrs26_phy_is_fdx(int ethUnit)
-{
-    int         phyUnit;
-    uint32_t    phyBase;
-    uint32_t    phyAddr;
-    uint16_t    phyHwStatus;
-    int         ii = 200;
-    
-    if (ethUnit == ENET_UNIT_LAN)
-        return TRUE;
-    
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-
-            phyBase = ATHR_PHYBASE(phyUnit);
-            phyAddr = ATHR_PHYADDR(phyUnit);
-
-            do {
-                phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-                   sysMsDelay(10);
-            } while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
-
-            if (phyHwStatus & ATHER_STATUS_FULL_DEPLEX)
-                return TRUE;
-        }
-    }
-
-    return FALSE;
-}
-
-
-/******************************************************************************
-*
-* athrs26_phy_speed - Determines the speed of phy ports associated with the
-* specified device.
-*
-* RETURNS:
-*               AG7100_PHY_SPEED_10T, AG7100_PHY_SPEED_100TX;
-*               AG7100_PHY_SPEED_1000T;
-*/
-
-BOOL
-athrs26_phy_speed(int ethUnit)
-{
-    int         phyUnit;
-    uint16_t    phyHwStatus;
-    uint32_t    phyBase;
-    uint32_t    phyAddr;
-    int         ii = 200;
-    
-    if (ethUnit == ENET_UNIT_LAN)
-        return _100BASET;
-
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        if (athrs26_phy_is_link_alive(phyUnit)) {
-
-            phyBase = ATHR_PHYBASE(phyUnit);
-            phyAddr = ATHR_PHYADDR(phyUnit);
-            
-            do {
-                phy_reg_read(phyBase, phyAddr, 
-                                           ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-                sysMsDelay(10);
-            }while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
-
-            phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >>
-                           ATHER_STATUS_LINK_SHIFT);
-
-            switch(phyHwStatus) {
-            case 0:
-                return _10BASET;
-            case 1:
-                return _100BASET;
-            case 2:
-                return _1000BASET;
-            default:
-                DRV_PRINT(DRV_DEBUG_PHYERROR, ("Unkown speed read!\n"));
-            }
-        }
-    }
-
-    return _10BASET;
-}
-
-/*****************************************************************************
-*
-* athr_phy_is_up -- checks for significant changes in PHY state.
-*
-* A "significant change" is:
-*     dropped link (e.g. ethernet cable unplugged) OR
-*     autonegotiation completed + link (e.g. ethernet cable plugged in)
-*
-* When a PHY is plugged in, phyLinkGained is called.
-* When a PHY is unplugged, phyLinkLost is called.
-*/
-
-int
-athrs26_phy_is_up(int ethUnit)
-{
-    int             phyUnit;
-    uint16_t        phyHwStatus;
-    athrPhyInfo_t  *lastStatus;
-    int             linkCount   = 0;
-    int             lostLinks   = 0;
-    int             gainedLinks = 0;
-    uint32_t        phyBase;
-    uint32_t        phyAddr;
-#ifdef CFG_ATHRHDR_REG
-    /* if using header to config s26, the link of MAC0 should always be up */
-    if (ethUnit == ENET_UNIT_LAN)
-        return 1;
-#endif
-
-    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
-        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
-            continue;
-        }
-
-        phyBase = ATHR_PHYBASE(phyUnit);
-        phyAddr = ATHR_PHYADDR(phyUnit);
-
-
-        lastStatus = &athrPhyInfo[phyUnit];
-        phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
-
-        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
-            /* See if we've lost link */
-            if (phyHwStatus & ATHR_STATUS_LINK_PASS) {
-                linkCount++;
-            } else {
-                lostLinks++;
-                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n",
-                                               ethUnit, phyUnit));
-                lastStatus->isPhyAlive = FALSE;
-            }
-        } else { /* last known link status was DEAD */
-            /* Check for reset complete */
-            phy_reg_read(phyBase, phyAddr, ATHR_PHY_STATUS, &phyHwStatus);
-            if (!ATHR_RESET_DONE(phyHwStatus))
-                continue;
-
-            /* Check for AutoNegotiation complete */            
-            if (ATHR_AUTONEG_DONE(phyHwStatus)) {
-                //printk("autoneg done\n");
-                gainedLinks++;
-                linkCount++;
-                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n",
-                                               ethUnit, phyUnit));
-                lastStatus->isPhyAlive = TRUE;
-            }
-        }
-    }
-
-    return (linkCount);
-
-#if 0
-    if (linkCount == 0) {
-        if (lostLinks) {
-            /* We just lost the last link for this MAC */
-            phyLinkLost(ethUnit);
-        }
-    } else {
-        if (gainedLinks == linkCount) {
-            /* We just gained our first link(s) for this MAC */
-            phyLinkGained(ethUnit);
-        }
-    }
-#endif
-}
-
-#ifdef CFG_ATHRHDR_EN
-void athr_hdr_timeout(void){
-       eth_halt();
-        NetState = NETLOOP_FAIL; 
-}
-
-void athr_hdr_handler(uchar *recv_pkt, unsigned dest, unsigned src, unsigned len){
-       header_receive_pkt(recv_pkt);
-       NetState = NETLOOP_SUCCESS;
-}
-static int
-athrs26_header_config_reg (struct eth_device *dev, uint8_t wr_flag,
-                           uint16_t reg_addr, uint16_t cmd_len,
-                           uint8_t *val)
-{
-    at_header_t at_header;
-    reg_cmd_t reg_cmd;
-    uchar *AthrHdrPkt;
-
-    AthrHdrPkt = NetTxPacket;
-
-    if(AthrHdrPkt == NULL) {
-               printf("Null packet\n");
-               return;
-    }
-    memset(AthrHdrPkt,0,60);
-
-    /*fill at_header*/
-    at_header.reserved0 = 0x10;  //default
-    at_header.priority = 0;
-    at_header.type = 0x5;
-    at_header.broadcast = 0;
-    at_header.from_cpu = 1;
-    at_header.reserved1 = 0x01; //default
-    at_header.port_num = 0;
-
-    AthrHdrPkt[0] = at_header.port_num;
-    AthrHdrPkt[0] |= at_header.reserved1 << 4;
-    AthrHdrPkt[0] |= at_header.from_cpu << 6;
-    AthrHdrPkt[0] |= at_header.broadcast << 7;
-
-    AthrHdrPkt[1] = at_header.type;
-    AthrHdrPkt[1] |= at_header.priority << 4;
-    AthrHdrPkt[1] |= at_header.reserved0 << 6;
-
-
-    /*fill reg cmd*/
-    if(cmd_len > 4)
-        cmd_len = 4;//only support 32bits register r/w
-
-    reg_cmd.reg_addr = reg_addr&0x3FFFC;
-    reg_cmd.cmd_len = cmd_len;
-    reg_cmd.cmd = wr_flag;
-    reg_cmd.reserved2 = 0x5; //default
-    reg_cmd.seq_num = seqcnt;
-
-    AthrHdrPkt[2] = reg_cmd.reg_addr & 0xff;
-    AthrHdrPkt[3] = (reg_cmd.reg_addr & 0xff00) >> 8;
-    AthrHdrPkt[4] = (reg_cmd.reg_addr & 0x30000) >> 16;
-    AthrHdrPkt[4] |= reg_cmd.cmd_len << 4;
-    AthrHdrPkt[5] = reg_cmd.cmd << 4;
-    AthrHdrPkt[5] |= reg_cmd.reserved2 << 5;
-    AthrHdrPkt[6] = (reg_cmd.seq_num & 0x7f) << 1;
-    AthrHdrPkt[7] = (reg_cmd.seq_num & 0x7f80) >> 7;
-    AthrHdrPkt[8] = (reg_cmd.seq_num & 0x7f8000) >> 15;
-    AthrHdrPkt[9] = (reg_cmd.seq_num & 0x7f800000) >> 23;
-
-    /*fill reg data*/
-    if(!wr_flag)//write
-        memcpy((AthrHdrPkt + 10), val, cmd_len);
-    
-    /*start xmit*/
-    if(dev == NULL) {
-       printf("ERROR device not found\n");
-       return -1;
-    }
-    header_xmit(dev, AthrHdrPkt ,60);
-    return 0;
-}
-void athr_hdr_func(void) {
-
-   NetSetTimeout (1 * CFG_HZ,athr_hdr_timeout );
-   NetSetHandler (athr_hdr_handler);
-
-   if(cmd) 
-       athrs26_header_config_reg(lan_mac, cmd, cmd_read.reg_addr, cmd_read.cmd_len, cmd_read.reg_data);
-   else 
-        athrs26_header_config_reg(lan_mac, cmd, cmd_write.reg_addr, cmd_write.cmd_len, cmd_write.reg_data);
-}
-static int
-athrs26_header_write_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
-{
-    int i = 2;
-    cmd_write.reg_addr = reg_addr;
-    cmd_write.cmd_len = cmd_len;
-    cmd_write.reg_data = reg_data;
-    cmd = 0;
-    seqcnt++;
-
-    do {
-       if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
-          break;
-    } while (i--);
-
-    return i;
-}
-
-static int
-athrs26_header_read_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
-{
-    int i = 2;
-
-    cmd_read.reg_addr = reg_addr;
-    cmd_read.cmd_len = cmd_len;
-    cmd_read.reg_data = reg_data;
-    cmd = 1;
-    seqcnt++;
-
-    do {
-        if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
-           break;
-    } while (i--);
-
-    if ((i==0) || (seqcnt != cmd_resp.seq) || (cmd_len != cmd_resp.len)) {
-        return -1;
-    }
-    memcpy (cmd_read.reg_data, cmd_resp.data, cmd_len);
-    return 0;
-}
-int header_receive_pkt(uchar *recv_pkt)
-{
-    cmd_resp.len = recv_pkt[4] >> 4;
-    if (cmd_resp.len > 10)
-        goto out;
-
-    cmd_resp.seq = recv_pkt[6] >> 1;
-    cmd_resp.seq |= recv_pkt[7] << 7;
-    cmd_resp.seq |= recv_pkt[8] << 15;
-    cmd_resp.seq |= recv_pkt[9] << 23;
-
-    if (cmd_resp.seq < seqcnt)
-        goto out;
-    memcpy (cmd_resp.data, (recv_pkt + 10), cmd_resp.len);
-out:
-     return 0;
-}
-
-void athrs26_reg_dev(struct eth_device *mac)
-{
-    lan_mac = mac;
-}
-
-#endif
-
-static uint32_t
-athrs26_reg_read(uint16_t reg_addr)
-{
-#ifndef CFG_ATHRHDR_REG
-    uint16_t reg_word_addr = reg_addr / 2, phy_val;
-    uint32_t phy_addr;
-    uint8_t phy_reg; 
-    
-    /* configure register high address */
-    phy_addr = 0x18;
-    phy_reg = 0x0;
-    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
-    phy_reg_write (0, phy_addr, phy_reg, phy_val);
-
-    /* read register with low address */
-    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
-    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address*/
-    phy_reg_read(0, phy_addr, phy_reg, &phy_val);
-    
-    return phy_val;
-#else
-    uint8_t reg_data[4];
-
-    memset (reg_data, 0, 4);
-    athrs26_header_read_reg(reg_addr, 4, reg_data);
-    return (reg_data[0] | (reg_data[1] << 8) | (reg_data[2] << 16) | (reg_data[3] << 24));
-#endif
-}
-
-static void
-athrs26_reg_write(uint16_t reg_addr, uint32_t reg_val)
-{
-#ifndef CFG_ATHRHDR_REG
-    uint16_t reg_word_addr = reg_addr / 2, phy_val;
-    uint32_t phy_addr;
-    uint8_t phy_reg; 
-
-    /* configure register high address */
-    phy_addr = 0x18;
-    phy_reg = 0x0;
-    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
-    phy_reg_write (0, phy_addr, phy_reg, phy_val);
-
-    /* read register with low address */
-    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
-    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address */
-    phy_reg_write (0, phy_addr, phy_reg, reg_val);
-#else
-    uint8_t reg_data[4];
-
-    memset (reg_data, 0, 4);
-    reg_data[0] = (uint8_t)(0x00ff & reg_val);
-    reg_data[1] = (uint8_t)((0xff00 & reg_val) >> 8);
-    reg_data[2] = (uint8_t)((0xff0000 & reg_val) >> 16);
-    reg_data[3] = (uint8_t)((0xff000000 & reg_val) >> 24);
-
-    athrs26_header_write_reg (reg_addr, 4, reg_data);
-#endif
-
-}
-
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/athrs26_phy.h
deleted file mode 100644 (file)
index 0fdde37..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-#ifndef _ATHRS26_PHY_H
-#define _ATHRS26_PHY_H
-
-/*****************/
-/* PHY Registers */
-/*****************/
-#define ATHR_PHY_CONTROL                 0
-#define ATHR_PHY_STATUS                  1
-#define ATHR_PHY_ID1                     2
-#define ATHR_PHY_ID2                     3
-#define ATHR_AUTONEG_ADVERT              4
-#define ATHR_LINK_PARTNER_ABILITY        5
-#define ATHR_AUTONEG_EXPANSION           6
-#define ATHR_NEXT_PAGE_TRANSMIT          7
-#define ATHR_LINK_PARTNER_NEXT_PAGE      8
-#define ATHR_1000BASET_CONTROL           9
-#define ATHR_1000BASET_STATUS            10
-#define ATHR_PHY_SPEC_CONTROL            16
-#define ATHR_PHY_SPEC_STATUS             17
-#define ATHR_DEBUG_PORT_ADDRESS          29
-#define ATHR_DEBUG_PORT_DATA             30
-
-/* ATHR_PHY_CONTROL fields */
-#define ATHR_CTRL_SOFTWARE_RESET                    0x8000
-#define ATHR_CTRL_SPEED_LSB                         0x2000
-#define ATHR_CTRL_AUTONEGOTIATION_ENABLE            0x1000
-#define ATHR_CTRL_RESTART_AUTONEGOTIATION           0x0200
-#define ATHR_CTRL_SPEED_FULL_DUPLEX                 0x0100
-#define ATHR_CTRL_SPEED_MSB                         0x0040
-
-#define ATHR_RESET_DONE(phy_control)                   \
-    (((phy_control) & (ATHR_CTRL_SOFTWARE_RESET)) == 0)
-    
-/* Phy status fields */
-#define ATHR_STATUS_AUTO_NEG_DONE                   0x0020
-
-#define ATHR_AUTONEG_DONE(ip_phy_status)                   \
-    (((ip_phy_status) &                                  \
-        (ATHR_STATUS_AUTO_NEG_DONE)) ==                    \
-        (ATHR_STATUS_AUTO_NEG_DONE))
-        
-/* Link Partner ability */
-#define ATHR_LINK_100BASETX_FULL_DUPLEX       0x0100
-#define ATHR_LINK_100BASETX                   0x0080
-#define ATHR_LINK_10BASETX_FULL_DUPLEX        0x0040
-#define ATHR_LINK_10BASETX                    0x0020
-
-/* Advertisement register. */
-#define ATHR_ADVERTISE_NEXT_PAGE              0x8000
-#define ATHR_ADVERTISE_ASYM_PAUSE             0x0800
-#define ATHR_ADVERTISE_PAUSE                  0x0400
-#define ATHR_ADVERTISE_100FULL                0x0100
-#define ATHR_ADVERTISE_100HALF                0x0080  
-#define ATHR_ADVERTISE_10FULL                 0x0040  
-#define ATHR_ADVERTISE_10HALF                 0x0020  
-
-#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \
-                            ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL)
-                       
-/* 1000BASET_CONTROL */
-#define ATHR_ADVERTISE_1000FULL               0x0200
-
-/* Phy Specific status fields */
-#define ATHER_STATUS_LINK_MASK                0xC000
-#define ATHER_STATUS_LINK_SHIFT               14
-#define ATHER_STATUS_FULL_DEPLEX              0x2000
-#define ATHR_STATUS_LINK_PASS                 0x0400
-#define ATHR_STATUS_RESOVLED                  0x0800
-
-/*phy debug port  register */
-#define ATHER_DEBUG_SERDES_REG                5
-
-/* Serdes debug fields */
-#define ATHER_SERDES_BEACON                   0x0100
-
-#ifndef BOOL
-#define BOOL    int
-#define TRUE    1
-#define FALSE   0
-#endif
-
-#define sysMsDelay(_x) udelay((_x) * 1000)
-
-#undef S26_VER_1_0
-
-#ifdef CFG_ATHRHDR_EN
-
-#include <net.h>
-#define header_xmit(dev,pkt,len) dev->send(dev,pkt,len) //dev_queue_xmit(skb)
-#define header_recv_ack(dev) dev->recv(dev) //dev_queue_xmit(skb)
-
-typedef enum {
-    NORMAL_PACKET,
-    RESERVED0,
-    MIB_1ST,
-    RESERVED1,
-    RESERVED2,
-    READ_WRITE_REG,
-    READ_WRITE_REG_ACK,
-    RESERVED3
-} ATHR_HDR_TYPE;
-
-typedef struct {
-    uint16_t    reserved0;
-    uint16_t    priority;
-    uint16_t    type ;
-    uint16_t    broadcast;
-    uint16_t    from_cpu;
-    uint16_t    reserved1;
-    uint16_t    port_num;
-}at_header_t;
-
-typedef struct {
-    uint64_t    reg_addr;
-    uint64_t    reserved0;
-    uint64_t    cmd_len;
-    uint64_t    reserved1;
-    uint64_t    cmd;
-    uint64_t    reserved2;
-    uint64_t    seq_num;
-}reg_cmd_t;
-void athrs26_reg_init(void);
-int header_receive_pkt(uchar *pkt);
-void athrs26_reg_dev(struct eth_device *mac);
-
-#endif
-
-int athrs26_phy_is_up(int unit);
-int athrs26_phy_is_fdx(int unit);
-int athrs26_phy_speed(int unit);
-BOOL athrs26_phy_setup(int unit);
-
-#endif /* _ATHRS26_PHY_H */
-
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/config.mk
deleted file mode 100644 (file)
index c0e5d82..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Danube board with MIPS 24Kc CPU core
-#
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifdef CONFIG_LZMA_BOOTSTRAP
-
-ifdef BUILD_BOOTSTRAP
-
-$(info BUILD_BOOTSTRAP )
-#TEXT_BASE = 0xB0000000
-TEXT_BASE = 0x80010000
-
-else # BUILD_BOOTSTRAP
-
-ifndef TEXT_BASE
-$(info redefine TEXT_BASE = 0x80040000 )
-TEXT_BASE = 0x80040000
-endif
-
-endif # BUILD_BOOTSTRAP
-
-else
-
-ifdef BUILD_BOOTSTRAP
-$(error BUILD_BOOTSTRAP but not enabled in config)
-endif
-
-ifndef TEXT_BASE
-## Standard: boot from ebu
-$(info redefine TEXT_BASE = 0xB0000000 )
-TEXT_BASE = 0xB0000000
-## For testing: boot from RAM
-# TEXT_BASE = 0x80100000
-endif
-
-endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings.h
deleted file mode 100644 (file)
index 4df6f11..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
-
-#define MC_DC0_VALUE   0x1B1B
-#define MC_DC1_VALUE   0x0
-#define MC_DC2_VALUE   0x0
-#define MC_DC3_VALUE   0x0
-#define MC_DC4_VALUE   0x0
-#define MC_DC5_VALUE   0x200
-#define MC_DC6_VALUE   0x605
-#define MC_DC7_VALUE   0x303
-#define MC_DC8_VALUE   0x102
-#define MC_DC9_VALUE   0x70a
-#define MC_DC10_VALUE  0x203
-#define MC_DC11_VALUE  0xc02
-#define MC_DC12_VALUE  0x1C8
-#define MC_DC13_VALUE  0x1
-#define MC_DC14_VALUE  0x0
-#define MC_DC15_VALUE  0x130  /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE  0xC800
-#define MC_DC17_VALUE  0xd
-#define MC_DC18_VALUE  0x301
-#define MC_DC19_VALUE  0x200
-#define MC_DC20_VALUE  0xA03  /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE  0x1b00
-#define MC_DC22_VALUE  0x1b1b
-#define MC_DC23_VALUE  0x0
-#define MC_DC24_VALUE  0x59   /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE  0x0
-#define MC_DC26_VALUE  0x0
-#define MC_DC27_VALUE  0x0
-#define MC_DC28_VALUE  0x510
-#define MC_DC29_VALUE  0x4e20
-#define MC_DC30_VALUE  0x8235
-#define MC_DC31_VALUE  0x0
-#define MC_DC32_VALUE  0x0
-#define MC_DC33_VALUE  0x0
-#define MC_DC34_VALUE  0x0
-#define MC_DC35_VALUE  0x0
-#define MC_DC36_VALUE  0x0
-#define MC_DC37_VALUE  0x0
-#define MC_DC38_VALUE  0x0
-#define MC_DC39_VALUE  0x0
-#define MC_DC40_VALUE  0x0
-#define MC_DC41_VALUE  0x0
-#define MC_DC42_VALUE  0x0
-#define MC_DC43_VALUE  0x0
-#define MC_DC44_VALUE  0x0
-#define MC_DC45_VALUE  0x500
-#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/ddr_settings_psc_166.h
deleted file mode 100644 (file)
index 445b7da..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
-
-#define MC_DC0_VALUE   0x1B1B
-#define MC_DC1_VALUE   0x0
-#define MC_DC2_VALUE   0x0
-#define MC_DC3_VALUE   0x0
-#define MC_DC4_VALUE   0x0
-#define MC_DC5_VALUE   0x200
-#define MC_DC6_VALUE   0x605
-#define MC_DC7_VALUE   0x303
-#define MC_DC8_VALUE   0x102
-#define MC_DC9_VALUE   0x70a
-#define MC_DC10_VALUE  0x203
-#define MC_DC11_VALUE  0xc02
-#define MC_DC12_VALUE  0x1C8
-#define MC_DC13_VALUE  0x1
-#define MC_DC14_VALUE  0x0
-#define MC_DC15_VALUE  0x120  /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE  0xC800
-#define MC_DC17_VALUE  0xd
-#define MC_DC18_VALUE  0x301
-#define MC_DC19_VALUE  0x200
-#define MC_DC20_VALUE  0xA04  /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE  0x1700
-#define MC_DC22_VALUE  0x1717
-#define MC_DC23_VALUE  0x0
-#define MC_DC24_VALUE  0x52   /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE  0x0
-#define MC_DC26_VALUE  0x0
-#define MC_DC27_VALUE  0x0
-#define MC_DC28_VALUE  0x510
-#define MC_DC29_VALUE  0x4e20
-#define MC_DC30_VALUE  0x8235
-#define MC_DC31_VALUE  0x0
-#define MC_DC32_VALUE  0x0
-#define MC_DC33_VALUE  0x0
-#define MC_DC34_VALUE  0x0
-#define MC_DC35_VALUE  0x0
-#define MC_DC36_VALUE  0x0
-#define MC_DC37_VALUE  0x0
-#define MC_DC38_VALUE  0x0
-#define MC_DC39_VALUE  0x0
-#define MC_DC40_VALUE  0x0
-#define MC_DC41_VALUE  0x0
-#define MC_DC42_VALUE  0x0
-#define MC_DC43_VALUE  0x0
-#define MC_DC44_VALUE  0x0
-#define MC_DC45_VALUE  0x500
-//#define MC_DC45_VALUE        0x400
-#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/lowlevel_init.S
deleted file mode 100644 (file)
index 2f2c225..0000000
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- *  Memory sub-system initialization code for Danube board.
- *  Andre Messerschmidt
- *  Copyright (c) 2005 Infineon Technologies AG
- *
- *  Based on Inca-IP code
- *  Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/* History:
-      peng liu May 25, 2006, for PLL setting after reset, 05252006
- */
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-
-#if 0
-
-#if defined(CONFIG_USE_DDR_RAM)
-
-#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
-#include "ddr_settings_r111.h"
-#define DDR111
-#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
-#include "ddr_settings_r166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
-#include "ddr_settings_e111.h"
-#define DDR111
-#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
-#include "ddr_settings_e166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
-#include "ddr_settings_PROMOSDDR400.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
-#include "ddr_settings_Samsung_166.h"
-#define DDR166
-#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
-#include "ddr_settings_psc_166.h"
-#define DDR166
-#else
-#warning "missing definition for ddr_settings.h, use default!"
-#include "ddr_settings.h"
-#endif
-#endif /* CONFIG_USE_DDR_RAM */
-
-#else
-
-#include "ddr_settings_psc_166.h"
-#define DDR166
-
-#endif
-
-#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
-#error "missing include of ddr_settings.h"
-#endif
-
-#define EBU_MODUL_BASE         0xBE105300
-#define EBU_CLC(value)         0x0000(value)
-#define EBU_CON(value)         0x0010(value)
-#define EBU_ADDSEL0(value)     0x0020(value)
-#define EBU_ADDSEL1(value)     0x0024(value)
-#define EBU_ADDSEL2(value)     0x0028(value)
-#define EBU_ADDSEL3(value)     0x002C(value)
-#define EBU_BUSCON0(value)     0x0060(value)
-#define EBU_BUSCON1(value)     0x0064(value)
-#define EBU_BUSCON2(value)     0x0068(value)
-#define EBU_BUSCON3(value)     0x006C(value)
-
-#define MC_MODUL_BASE          0xBF800000
-#define MC_ERRCAUSE(value)     0x0010(value)
-#define MC_ERRADDR(value)      0x0020(value)
-#define MC_CON(value)          0x0060(value)
-
-#define MC_SRAM_ENABLE         0x00000004
-#define MC_SDRAM_ENABLE                0x00000002
-#define MC_DDRRAM_ENABLE       0x00000001
-
-#define MC_SDR_MODUL_BASE      0xBF800200
-#define MC_IOGP(value)         0x0000(value)
-#define MC_CTRLENA(value)      0x0010(value)
-#define MC_MRSCODE(value)      0x0020(value)
-#define MC_CFGDW(value)                0x0030(value)
-#define MC_CFGPB0(value)       0x0040(value)
-#define MC_LATENCY(value)      0x0080(value)
-#define MC_TREFRESH(value)     0x0090(value)
-#define MC_SELFRFSH(value)     0x00A0(value)
-
-#define MC_DDR_MODUL_BASE      0xBF801000
-#define MC_DC00(value)         0x0000(value)
-#define MC_DC01(value)         0x0010(value)
-#define MC_DC02(value)         0x0020(value)
-#define MC_DC03(value)         0x0030(value)
-#define MC_DC04(value)         0x0040(value)
-#define MC_DC05(value)         0x0050(value)
-#define MC_DC06(value)         0x0060(value)
-#define MC_DC07(value)         0x0070(value)
-#define MC_DC08(value)         0x0080(value)
-#define MC_DC09(value)         0x0090(value)
-#define MC_DC10(value)         0x00A0(value)
-#define MC_DC11(value)         0x00B0(value)
-#define MC_DC12(value)         0x00C0(value)
-#define MC_DC13(value)         0x00D0(value)
-#define MC_DC14(value)         0x00E0(value)
-#define MC_DC15(value)         0x00F0(value)
-#define MC_DC16(value)         0x0100(value)
-#define MC_DC17(value)         0x0110(value)
-#define MC_DC18(value)         0x0120(value)
-#define MC_DC19(value)         0x0130(value)
-#define MC_DC20(value)         0x0140(value)
-#define MC_DC21(value)         0x0150(value)
-#define MC_DC22(value)         0x0160(value)
-#define MC_DC23(value)         0x0170(value)
-#define MC_DC24(value)         0x0180(value)
-#define MC_DC25(value)         0x0190(value)
-#define MC_DC26(value)         0x01A0(value)
-#define MC_DC27(value)         0x01B0(value)
-#define MC_DC28(value)         0x01C0(value)
-#define MC_DC29(value)         0x01D0(value)
-#define MC_DC30(value)         0x01E0(value)
-#define MC_DC31(value)         0x01F0(value)
-#define MC_DC32(value)         0x0200(value)
-#define MC_DC33(value)         0x0210(value)
-#define MC_DC34(value)         0x0220(value)
-#define MC_DC35(value)         0x0230(value)
-#define MC_DC36(value)         0x0240(value)
-#define MC_DC37(value)         0x0250(value)
-#define MC_DC38(value)         0x0260(value)
-#define MC_DC39(value)         0x0270(value)
-#define MC_DC40(value)         0x0280(value)
-#define MC_DC41(value)         0x0290(value)
-#define MC_DC42(value)         0x02A0(value)
-#define MC_DC43(value)         0x02B0(value)
-#define MC_DC44(value)         0x02C0(value)
-#define MC_DC45(value)         0x02D0(value)
-#define MC_DC46(value)         0x02E0(value)
-
-#define RCU_OFFSET  0xBF203000
-#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
-#define RCU_STS          (RCU_OFFSET + 0x0014)
-
-#define CGU_OFFSET  0xBF103000
-#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
-#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
-#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
-#define  CGU_SYS      (CGU_OFFSET + 0x0010)
-#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
-#define  IF_CLK       (CGU_OFFSET + 0x0018)
-#define  CGU_SMD      (CGU_OFFSET + 0x0020)
-#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
-#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
-#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
-#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
-#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
-#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
-#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
-
-//05252006
-#define  pll0_35MHz_CONFIG 0x9D861059
-#define  pll1_35MHz_CONFIG 0x1A260CD9
-#define  pll2_35MHz_CONFIG 0x8000f1e5
-#define  pll0_36MHz_CONFIG 0x1000125D
-#define  pll1_36MHz_CONFIG 0x1B1E0C99
-#define  pll2_36MHz_CONFIG 0x8002f2a1
-//05252006
-
-//06063001-joelin disable the PCI CFRAME mask -start
-/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
-But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
-
-The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
-The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
-*/
-#define PCI_CR_PR_OFFSET  0xBE105400
-#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
-#define PCI_CONFIG_SPACE  0xB7000000
-#define CS_CFM         (PCI_CONFIG_SPACE + 0x6C)
-//06063001-joelin disable the PCI CFRAME mask -end
-       .set    noreorder
-
-
-/*
- * void ebu_init(void)
- */
-       .globl  ebu_init
-       .ent    ebu_init
-ebu_init:
-
-#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
-       defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
-       defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
-       defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
-
-       li      t1, EBU_MODUL_BASE
-#if defined(CONFIG_EBU_ADDSEL0)
-       li      t2, CONFIG_EBU_ADDSEL0
-       sw      t2, EBU_ADDSEL0(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL1)
-       li      t2, CONFIG_EBU_ADDSEL1
-       sw      t2, EBU_ADDSEL1(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL2)
-       li      t2, CONFIG_EBU_ADDSEL2
-       sw      t2, EBU_ADDSEL2(t1)
-#endif
-#if defined(CONFIG_EBU_ADDSEL3)
-       li      t2, CONFIG_EBU_ADDSEL3
-       sw      t2, EBU_ADDSEL3(t1)
-#endif
-
-#if defined(CONFIG_EBU_BUSCON0)
-       li      t2, CONFIG_EBU_BUSCON0
-       sw      t2, EBU_BUSCON0(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON1)
-       li      t2, CONFIG_EBU_BUSCON1
-       sw      t2, EBU_BUSCON1(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON2)
-       li      t2, CONFIG_EBU_BUSCON2
-       sw      t2, EBU_BUSCON2(t1)
-#endif
-#if defined(CONFIG_EBU_BUSCON3)
-       li      t2, CONFIG_EBU_BUSCON3
-       sw      t2, EBU_BUSCON3(t1)
-#endif
-
-#endif
-
-       j       ra
-       nop
-
-       .end    ebu_init
-
-
-/*
- * void cgu_init(long)
- *
- * a0 has the clock value
- */
-       .globl  cgu_init
-       .ent    cgu_init
-cgu_init:
-       li  t2, CGU_SYS
-       lw  t2,0(t2)
-       beq t2,a0,freq_up2date
-       nop
-
-       li  t2, RCU_STS
-       lw  t2, 0(t2)
-       and t2,0x00020000
-       beq t2,0x00020000,boot_36MHZ
-       nop
-//05252006
-       li  t1, PLL0_CFG
-       li  t2, pll0_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL1_CFG
-       li  t2, pll1_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL2_CFG
-       li  t2, pll2_35MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, CGU_SYS
-       sw      a0,0(t1)
-       li  t1, RCU_RST_REQ
-       li  t2, 0x40000008
-       sw      t2,0(t1)
-       b   wait_reset
-       nop
-boot_36MHZ:
-       li  t1, PLL0_CFG
-       li  t2, pll0_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL1_CFG
-       li  t2, pll1_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, PLL2_CFG
-       li  t2, pll2_36MHz_CONFIG
-       sw      t2,0(t1)
-       li  t1, CGU_SYS
-       sw      a0,0(t1)
-       li  t1, RCU_RST_REQ
-       li  t2, 0x40000008
-       sw      t2,0(t1)
-//05252006
-
-wait_reset:
-       b   wait_reset
-       nop
-freq_up2date:
-       j ra
-       nop
-
-       .end    cgu_init
-
-#ifndef CONFIG_USE_DDR_RAM
-/*
- * void sdram_init(long)
- *
- * a0 has the clock value
- */
-       .globl  sdram_init
-       .ent    sdram_init
-sdram_init:
-
-       /* SDRAM Initialization
-        */
-       li      t1, MC_MODUL_BASE
-
-       /* Clear Error log registers */
-       sw      zero, MC_ERRCAUSE(t1)
-       sw      zero, MC_ERRADDR(t1)
-
-       /* Enable SDRAM module in memory controller */
-       li      t3, MC_SDRAM_ENABLE
-       lw      t2, MC_CON(t1)
-       or      t3, t2, t3
-       sw      t3, MC_CON(t1)
-
-       li      t1, MC_SDR_MODUL_BASE
-
-       /* disable the controller */
-       li      t2, 0
-       sw      t2, MC_CTRLENA(t1)
-
-       li      t2, 0x822
-       sw      t2, MC_IOGP(t1)
-
-       li      t2, 0x2
-       sw      t2, MC_CFGDW(t1)
-
-       /* Set CAS Latency */
-       li      t2, 0x00000020
-       sw      t2, MC_MRSCODE(t1)
-
-       /* Set CS0 to SDRAM parameters */
-       li      t2, 0x000014d8
-       sw      t2, MC_CFGPB0(t1)
-
-       /* Set SDRAM latency parameters */
-       li      t2, 0x00036325;   /* BC PC100 */
-       sw      t2, MC_LATENCY(t1)
-
-       /* Set SDRAM refresh rate */
-       li      t2, 0x00000C30
-       sw      t2, MC_TREFRESH(t1)
-
-       /* Clear Power-down registers */
-       sw      zero, MC_SELFRFSH(t1)
-
-       /* Finally enable the controller */
-       li      t2, 1
-       sw      t2, MC_CTRLENA(t1)
-
-       j       ra
-       nop
-
-       .end    sdram_init
-
-#endif /* !CONFIG_USE_DDR_RAM */
-
-#ifdef CONFIG_USE_DDR_RAM
-/*
- * void ddrram_init(long)
- *
- * a0 has the clock value
- */
-       .globl  ddrram_init
-       .ent    ddrram_init
-ddrram_init:
-
-       /* DDR-DRAM Initialization
-        */
-       li      t1, MC_MODUL_BASE
-
-       /* Clear Error log registers */
-       sw      zero, MC_ERRCAUSE(t1)
-       sw      zero, MC_ERRADDR(t1)
-
-       /* Enable DDR module in memory controller */
-       li      t3, MC_DDRRAM_ENABLE
-       lw      t2, MC_CON(t1)
-       or      t3, t2, t3
-       sw      t3, MC_CON(t1)
-
-       li      t1, MC_DDR_MODUL_BASE
-
-       /* Write configuration to DDR controller registers */
-       li      t2, MC_DC0_VALUE
-       sw      t2, MC_DC00(t1)
-
-       li      t2, MC_DC1_VALUE
-       sw      t2, MC_DC01(t1)
-
-       li      t2, MC_DC2_VALUE
-       sw      t2, MC_DC02(t1)
-
-       li      t2, MC_DC3_VALUE
-       sw      t2, MC_DC03(t1)
-
-       li      t2, MC_DC4_VALUE
-       sw      t2, MC_DC04(t1)
-
-       li      t2, MC_DC5_VALUE
-       sw      t2, MC_DC05(t1)
-
-       li      t2, MC_DC6_VALUE
-       sw      t2, MC_DC06(t1)
-
-       li      t2, MC_DC7_VALUE
-       sw      t2, MC_DC07(t1)
-
-       li      t2, MC_DC8_VALUE
-       sw      t2, MC_DC08(t1)
-
-       li      t2, MC_DC9_VALUE
-       sw      t2, MC_DC09(t1)
-
-       li      t2, MC_DC10_VALUE
-       sw      t2, MC_DC10(t1)
-
-       li      t2, MC_DC11_VALUE
-       sw      t2, MC_DC11(t1)
-
-       li      t2, MC_DC12_VALUE
-       sw      t2, MC_DC12(t1)
-
-       li      t2, MC_DC13_VALUE
-       sw      t2, MC_DC13(t1)
-
-       li      t2, MC_DC14_VALUE
-       sw      t2, MC_DC14(t1)
-
-       li      t2, MC_DC15_VALUE
-       sw      t2, MC_DC15(t1)
-
-       li      t2, MC_DC16_VALUE
-       sw      t2, MC_DC16(t1)
-
-       li      t2, MC_DC17_VALUE
-       sw      t2, MC_DC17(t1)
-
-       li      t2, MC_DC18_VALUE
-       sw      t2, MC_DC18(t1)
-
-       li      t2, MC_DC19_VALUE
-       sw      t2, MC_DC19(t1)
-
-       li      t2, MC_DC20_VALUE
-       sw      t2, MC_DC20(t1)
-
-       li      t2, MC_DC21_VALUE
-       sw      t2, MC_DC21(t1)
-
-       li      t2, MC_DC22_VALUE
-       sw      t2, MC_DC22(t1)
-
-       li      t2, MC_DC23_VALUE
-       sw      t2, MC_DC23(t1)
-
-       li      t2, MC_DC24_VALUE
-       sw      t2, MC_DC24(t1)
-
-       li      t2, MC_DC25_VALUE
-       sw      t2, MC_DC25(t1)
-
-       li      t2, MC_DC26_VALUE
-       sw      t2, MC_DC26(t1)
-
-       li      t2, MC_DC27_VALUE
-       sw      t2, MC_DC27(t1)
-
-       li      t2, MC_DC28_VALUE
-       sw      t2, MC_DC28(t1)
-
-       li      t2, MC_DC29_VALUE
-       sw      t2, MC_DC29(t1)
-
-       li      t2, MC_DC30_VALUE
-       sw      t2, MC_DC30(t1)
-
-       li      t2, MC_DC31_VALUE
-       sw      t2, MC_DC31(t1)
-
-       li      t2, MC_DC32_VALUE
-       sw      t2, MC_DC32(t1)
-
-       li      t2, MC_DC33_VALUE
-       sw      t2, MC_DC33(t1)
-
-       li      t2, MC_DC34_VALUE
-       sw      t2, MC_DC34(t1)
-
-       li      t2, MC_DC35_VALUE
-       sw      t2, MC_DC35(t1)
-
-       li      t2, MC_DC36_VALUE
-       sw      t2, MC_DC36(t1)
-
-       li      t2, MC_DC37_VALUE
-       sw      t2, MC_DC37(t1)
-
-       li      t2, MC_DC38_VALUE
-       sw      t2, MC_DC38(t1)
-
-       li      t2, MC_DC39_VALUE
-       sw      t2, MC_DC39(t1)
-
-       li      t2, MC_DC40_VALUE
-       sw      t2, MC_DC40(t1)
-
-       li      t2, MC_DC41_VALUE
-       sw      t2, MC_DC41(t1)
-
-       li      t2, MC_DC42_VALUE
-       sw      t2, MC_DC42(t1)
-
-       li      t2, MC_DC43_VALUE
-       sw      t2, MC_DC43(t1)
-
-       li      t2, MC_DC44_VALUE
-       sw      t2, MC_DC44(t1)
-
-       li      t2, MC_DC45_VALUE
-       sw      t2, MC_DC45(t1)
-
-       li      t2, MC_DC46_VALUE
-       sw      t2, MC_DC46(t1)
-
-       li      t2, 0x00000100
-       sw      t2, MC_DC03(t1)
-
-       j       ra
-       nop
-
-       .end    ddrram_init
-#endif /* CONFIG_USE_DDR_RAM */
-
-       .globl  lowlevel_init
-       .ent    lowlevel_init
-lowlevel_init:
-       /* EBU, CGU and SDRAM/DDR-RAM Initialization.
-        */
-       move    t0, ra
-       /* We rely on the fact that non of the following ..._init() functions
-        * modify t0
-        */
-#if defined(CONFIG_SYS_EBU_BOOT)
-#if defined(DDR166)
-       /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
-       li  a0,0xe8
-#elif defined(DDR133)
-       /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
-       li  a0,0xe9
-#else /* defined(DDR111) */
-       /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
-       li  a0,0xea
-#endif
-       bal     cgu_init
-       nop
-#endif /* CONFIG_SYS_EBU_BOOT */
-
-       bal     ebu_init
-       nop
-
-//06063001-joelin disable the PCI CFRAME mask-start
-#ifdef DISABLE_CFRAME
-       li  t1, PCI_CR_PCI      //mw bf103034 80000000
-       li  t2, 0x80000000
-       sw      t2,0(t1)
-
-       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
-       li  t2, 0x103
-       sw  t2,0(t1)
-
-       li  t1, CS_CFM                  //mw b700006c 0
-       li  t2, 0x00
-       sw  t2, 0(t1)
-
-       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
-       li  t2, 0x1000103
-       sw  t2, 0(t1)
-#endif
-//06063001-joelin disable the PCI CFRAME mask-end
-
-#ifdef CONFIG_SYS_EBU_BOOT
-#ifndef CONFIG_SYS_RAMBOOT
-#ifdef CONFIG_USE_DDR_RAM
-       bal     ddrram_init
-       nop
-#else
-       bal     sdram_init
-       nop
-#endif
-#endif /* CONFIG_SYS_RAMBOOT */
-#endif /* CONFIG_SYS_EBU_BOOT */
-
-       move    ra, t0
-       j       ra
-       nop
-
-       .end    lowlevel_init
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/pmuenable.S
deleted file mode 100644 (file)
index e0d7971..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  Power Management unit initialization code for AMAZON development board.
- *
- *  Copyright (c) 2003 Ou Ke, Infineon.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-
-#define PMU_PWDCR              0xBF10201C
-#define PMU_SR                 0xBF102020
-
-       .globl  pmuenable
-
-pmuenable:
-       li      t0, PMU_PWDCR
-       li      t1, 0x2         /* enable everything */
-       sw      t1, 0(t0)
-#if 0
-1:
-       li      t0, PMU_SR
-       lw      t2, 0(t0)
-       bne     t1, t2, 1b
-       nop
-#endif
-       j       ra
-       nop
-
-
diff --git a/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/arv752DWP22/u-boot.lds
deleted file mode 100644 (file)
index 9a6cd1b..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-       . = 0x00000000;
-
-       . = ALIGN(4);
-       .text       :
-       {
-         *(.text)
-       }
-
-       . = ALIGN(4);
-       .rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-       . = ALIGN(4);
-       .data  : { *(.data) }
-
-       . = .;
-       _gp = ALIGN(16) + 0x7ff0;
-
-       .got : {
-         __got_start = .;
-         *(.got)
-         __got_end = .;
-       }
-
-       .sdata  : { *(.sdata) }
-
-       .u_boot_cmd : {
-         __u_boot_cmd_start = .;
-         *(.u_boot_cmd)
-         __u_boot_cmd_end = .;
-       }
-
-       uboot_end_data = .;
-       num_got_entries = (__got_end - __got_start) >> 2;
-
-       . = ALIGN(4);
-       .sbss (NOLOAD)  : { *(.sbss) }
-       .bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
-       uboot_end = .;
-}
diff --git a/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c b/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.c
new file mode 100644 (file)
index 0000000..2f80ee0
--- /dev/null
@@ -0,0 +1,814 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright © 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ */
+
+/*
+ * Manage the atheros ethernet PHY.
+ *
+ * All definitions in this file are operating system independent!
+ */
+
+#include <config.h>
+#include <linux/types.h>
+#include <common.h>
+#include <miiphy.h>
+//#include "phy.h"
+//#include "ar7100_soc.h"
+#include "athrs26_phy.h"
+
+#define phy_reg_read(base, addr, reg, datap)                    \
+    miiphy_read("lq_cpe_eth", addr, reg, datap);
+#define phy_reg_write(base, addr, reg, data)                   \
+    miiphy_write("lq_cpe_eth", addr, reg, data);
+            
+
+/* PHY selections and access functions */
+
+typedef enum {
+    PHY_SRCPORT_INFO, 
+    PHY_PORTINFO_SIZE,
+} PHY_CAP_TYPE;
+
+typedef enum {
+    PHY_SRCPORT_NONE,
+    PHY_SRCPORT_VLANTAG, 
+    PHY_SRCPORT_TRAILER,
+} PHY_SRCPORT_TYPE;
+
+#ifdef DEBUG
+#define DRV_DEBUG 1
+#endif
+//#define DRV_DEBUG 1
+
+#define DRV_DEBUG_PHYERROR  0x00000001
+#define DRV_DEBUG_PHYCHANGE 0x00000002
+#define DRV_DEBUG_PHYSETUP  0x00000004
+
+#if DRV_DEBUG
+int athrPhyDebug = DRV_DEBUG_PHYERROR|DRV_DEBUG_PHYCHANGE|DRV_DEBUG_PHYSETUP;
+
+#define DRV_LOG(FLG, X0, X1, X2, X3, X4, X5, X6)    \
+{                                                   \
+    if (athrPhyDebug & (FLG)) {                       \
+        logMsg(X0, X1, X2, X3, X4, X5, X6);         \
+    }                                               \
+}
+
+#define DRV_MSG(x,a,b,c,d,e,f)                      \
+    logMsg(x,a,b,c,d,e,f)
+
+#define DRV_PRINT(FLG, X)                           \
+{                                                   \
+    if (athrPhyDebug & (FLG)) {                       \
+        printf X;                                   \
+    }                                               \
+}
+
+#else /* !DRV_DEBUG */
+#define DRV_LOG(DBG_SW, X0, X1, X2, X3, X4, X5, X6)
+#define DRV_MSG(x,a,b,c,d,e,f)
+#define DRV_PRINT(DBG_SW,X)
+#endif
+
+#define ATHR_LAN_PORT_VLAN          1
+#define ATHR_WAN_PORT_VLAN          2
+
+#define ENET_UNIT_LAN 0
+
+#define TRUE    1
+#define FALSE   0
+
+#define ATHR_PHY0_ADDR   0x0
+#define ATHR_PHY1_ADDR   0x1
+#define ATHR_PHY2_ADDR   0x2
+#define ATHR_PHY3_ADDR   0x3
+#define ATHR_PHY4_ADDR   0x4
+
+/*
+ * Track per-PHY port information.
+ */
+typedef struct {
+    BOOL   isEnetPort;       /* normal enet port */
+    BOOL   isPhyAlive;       /* last known state of link */
+    int    ethUnit;          /* MAC associated with this phy port */
+    uint32_t phyBase;
+    uint32_t phyAddr;          /* PHY registers associated with this phy port */
+    uint32_t VLANTableSetting; /* Value to be written to VLAN table */
+} athrPhyInfo_t;
+
+/*
+ * Per-PHY information, indexed by PHY unit number.
+ */
+static athrPhyInfo_t athrPhyInfo[] = {
+    {TRUE,   /* phy port 0 -- LAN port 0 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY0_ADDR,
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 1 -- LAN port 1 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY1_ADDR,
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 2 -- LAN port 2 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY2_ADDR, 
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 3 -- LAN port 3 */
+     FALSE,
+     ENET_UNIT_LAN,
+     0,
+     ATHR_PHY3_ADDR, 
+     ATHR_LAN_PORT_VLAN
+    },
+
+    {TRUE,   /* phy port 4 -- WAN port or LAN port 4 */
+     FALSE,
+     1,
+     0,
+     ATHR_PHY4_ADDR, 
+     ATHR_LAN_PORT_VLAN   /* Send to all ports */
+    },
+
+    {FALSE,  /* phy port 5 -- CPU port (no RJ45 connector) */
+     TRUE,
+     ENET_UNIT_LAN,
+     0,
+     0x00, 
+     ATHR_LAN_PORT_VLAN    /* Send to all ports */
+    },
+};
+
+#ifdef CFG_ATHRHDR_EN
+typedef struct {
+    uint8_t data[ATHRHDR_MAX_DATA];
+    uint8_t len;
+    uint32_t seq;
+} cmd_resp_t;
+
+typedef struct {
+ uint16_t reg_addr;
+ uint16_t cmd_len;
+ uint8_t *reg_data;
+}cmd_write_t;
+
+static cmd_write_t cmd_write,cmd_read;
+static cmd_resp_t cmd_resp;
+static struct eth_device *lan_mac;
+//static atomic_t seqcnt = ATOMIC_INIT(0);
+static int  seqcnt = 0;
+static int cmd = 1;
+//volatile uchar AthrHdrPkt[60];
+#endif
+
+#define ATHR_GLOBALREGBASE    0
+
+//#define ATHR_PHY_MAX (sizeof(athrPhyInfo) / sizeof(athrPhyInfo[0]))
+#define ATHR_PHY_MAX 5
+
+/* Range of valid PHY IDs is [MIN..MAX] */
+#define ATHR_ID_MIN 0
+#define ATHR_ID_MAX (ATHR_PHY_MAX-1)
+
+/* Convenience macros to access myPhyInfo */
+#define ATHR_IS_ENET_PORT(phyUnit) (athrPhyInfo[phyUnit].isEnetPort)
+#define ATHR_IS_PHY_ALIVE(phyUnit) (athrPhyInfo[phyUnit].isPhyAlive)
+#define ATHR_ETHUNIT(phyUnit) (athrPhyInfo[phyUnit].ethUnit)
+#define ATHR_PHYBASE(phyUnit) (athrPhyInfo[phyUnit].phyBase)
+#define ATHR_PHYADDR(phyUnit) (athrPhyInfo[phyUnit].phyAddr)
+#define ATHR_VLAN_TABLE_SETTING(phyUnit) (athrPhyInfo[phyUnit].VLANTableSetting)
+
+
+#define ATHR_IS_ETHUNIT(phyUnit, ethUnit) \
+            (ATHR_IS_ENET_PORT(phyUnit) &&        \
+            ATHR_ETHUNIT(phyUnit) == (ethUnit))
+
+#define ATHR_IS_WAN_PORT(phyUnit) (!(ATHR_ETHUNIT(phyUnit)==ENET_UNIT_LAN))
+            
+/* Forward references */
+BOOL       athrs26_phy_is_link_alive(int phyUnit);
+static uint32_t athrs26_reg_read(uint16_t reg_addr);
+static void athrs26_reg_write(uint16_t reg_addr, 
+                              uint32_t reg_val);
+
+/******************************************************************************
+*
+* athrs26_phy_is_link_alive - test to see if the specified link is alive
+*
+* RETURNS:
+*    TRUE  --> link is alive
+*    FALSE --> link is down
+*/
+
+void athrs26_reg_init()
+{
+
+    athrs26_reg_write(0x200, 0x200);
+    athrs26_reg_write(0x300, 0x200);
+    athrs26_reg_write(0x400, 0x200);
+    athrs26_reg_write(0x500, 0x200);
+    athrs26_reg_write(0x600, 0x7d);
+
+#ifdef S26_VER_1_0
+    phy_reg_write(0, 0, 29, 41);
+    phy_reg_write(0, 0, 30, 0);
+    phy_reg_write(0, 1, 29, 41);
+    phy_reg_write(0, 1, 30, 0);
+    phy_reg_write(0, 2, 29, 41);
+    phy_reg_write(0, 2, 30, 0);
+    phy_reg_write(0, 3, 29, 41);
+    phy_reg_write(0, 3, 30, 0);
+    phy_reg_write(0, 4, 29, 41);
+    phy_reg_write(0, 4, 30, 0);
+#endif
+
+    athrs26_reg_write(0x38, 0xc000050e);
+
+#ifdef CFG_ATHRHDR_EN
+    athrs26_reg_write(0x104, 0x4804);
+#else
+    athrs26_reg_write(0x104, 0x4004);
+#endif
+
+    athrs26_reg_write(0x60, 0xffffffff);
+    athrs26_reg_write(0x64, 0xaaaaaaaa);
+    athrs26_reg_write(0x68, 0x55555555);
+    athrs26_reg_write(0x6c, 0x0);
+
+    athrs26_reg_write(0x70, 0x41af);
+}
+
+BOOL
+athrs26_phy_is_link_alive(int phyUnit)
+{
+    uint16_t phyHwStatus;
+    uint32_t phyBase;
+    uint32_t phyAddr;
+
+    phyBase = ATHR_PHYBASE(phyUnit);
+    phyAddr = ATHR_PHYADDR(phyUnit);
+
+    phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+
+    if (phyHwStatus & ATHR_STATUS_LINK_PASS)
+        return TRUE;
+
+    return FALSE;
+}
+
+
+/******************************************************************************
+*
+* athrs26_phy_setup - reset and setup the PHY associated with
+* the specified MAC unit number.
+*
+* Resets the associated PHY port.
+*
+* RETURNS:
+*    TRUE  --> associated PHY is alive
+*    FALSE --> no LINKs on this ethernet unit
+*/
+
+BOOL
+athrs26_phy_setup(int ethUnit)
+{
+    int         phyUnit;
+    uint16_t    phyHwStatus;
+    uint16_t    timeout;
+    int         liveLinks = 0;
+    uint32_t    phyBase = 0;
+    BOOL        foundPhy = FALSE;
+    uint32_t  phyAddr = 0;
+    uint32_t  regVal;
+    
+
+    /* See if there's any configuration data for this enet */
+    /* start auto negogiation on each phy */
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+                       continue;
+        }
+
+
+        foundPhy = TRUE;
+        phyBase = ATHR_PHYBASE(phyUnit);
+        phyAddr = ATHR_PHYADDR(phyUnit);
+
+        phy_reg_write(phyBase, phyAddr, ATHR_AUTONEG_ADVERT,
+                      ATHR_ADVERTISE_ALL);
+
+        /* Reset PHYs*/
+        phy_reg_write(phyBase, phyAddr, ATHR_PHY_CONTROL,
+                      ATHR_CTRL_AUTONEGOTIATION_ENABLE
+                      | ATHR_CTRL_SOFTWARE_RESET);
+
+       }
+
+    if (!foundPhy) {
+        return FALSE; /* No PHY's configured for this ethUnit */
+    }
+
+    /*
+     * After the phy is reset, it takes a little while before
+     * it can respond properly.
+     */
+    sysMsDelay(1000);
+    
+    /*
+     * Wait up to .75 seconds for ALL associated PHYs to finish
+     * autonegotiation.  The only way we get out of here sooner is
+     * if ALL PHYs are connected AND finish autonegotiation.
+     */
+    for (phyUnit=0; (phyUnit < ATHR_PHY_MAX) /*&& (timeout > 0) */; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        timeout=20;
+        for (;;) {
+                       phyHwStatus = 0;
+            phy_reg_read(phyBase, phyAddr, ATHR_PHY_CONTROL, &phyHwStatus);
+
+               if (ATHR_RESET_DONE(phyHwStatus)) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Neg Success\n", phyUnit));
+                break;
+            }
+            if (timeout == 0) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Negogiation timeout\n", phyUnit));
+                break;
+            }
+            if (--timeout == 0) {
+                DRV_PRINT(DRV_DEBUG_PHYSETUP,
+                          ("Port %d, Negogiation timeout\n", phyUnit));
+                break;
+            }
+
+            sysMsDelay(150);
+        }
+    }
+
+       /*
+     * All PHYs have had adequate time to autonegotiate.
+     * Now initialize software status.
+     *
+     * It's possible that some ports may take a bit longer
+     * to autonegotiate; but we can't wait forever.  They'll
+     * get noticed by mv_phyCheckStatusChange during regular
+     * polling activities.
+     */
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+            liveLinks++;
+            ATHR_IS_PHY_ALIVE(phyUnit) = TRUE;
+        } else {
+            ATHR_IS_PHY_ALIVE(phyUnit) = FALSE;
+        }
+
+        phy_reg_read(ATHR_PHYBASE(phyUnit), ATHR_PHYADDR(phyUnit), 
+                    ATHR_PHY_SPEC_STATUS, &regVal);
+        DRV_PRINT(DRV_DEBUG_PHYSETUP,
+            ("eth%d: Phy Specific Status=%4.4x\n", ethUnit, regVal)); 
+    }
+#if 0
+    /* if using header for register configuration, we have to     */
+    /* configure s26 register after frame transmission is enabled */
+
+    athrs26_reg_write(0x200, 0x200);
+    athrs26_reg_write(0x300, 0x200);
+    athrs26_reg_write(0x400, 0x200);
+    athrs26_reg_write(0x500, 0x200);
+    athrs26_reg_write(0x600, 0x200);
+       athrs26_reg_write(0x38, 0x50e);
+#endif
+#ifndef CFG_ATHRHDR_EN       
+/* if using header for register configuration, we have to     */
+    /* configure s26 register after frame transmission is enabled */
+        athrs26_reg_init();
+#endif
+    
+    return (liveLinks > 0);
+}
+
+/******************************************************************************
+*
+* athrs26_phy_is_fdx - Determines whether the phy ports associated with the
+* specified device are FULL or HALF duplex.
+*
+* RETURNS:
+*    1  --> FULL
+*    0 --> HALF
+*/
+int
+athrs26_phy_is_fdx(int ethUnit)
+{
+    int         phyUnit;
+    uint32_t    phyBase;
+    uint32_t    phyAddr;
+    uint16_t    phyHwStatus;
+    int         ii = 200;
+    
+    if (ethUnit == ENET_UNIT_LAN)
+        return TRUE;
+    
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+
+            phyBase = ATHR_PHYBASE(phyUnit);
+            phyAddr = ATHR_PHYADDR(phyUnit);
+
+            do {
+                phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+                   sysMsDelay(10);
+            } while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
+
+            if (phyHwStatus & ATHER_STATUS_FULL_DEPLEX)
+                return TRUE;
+        }
+    }
+
+    return FALSE;
+}
+
+
+/******************************************************************************
+*
+* athrs26_phy_speed - Determines the speed of phy ports associated with the
+* specified device.
+*
+* RETURNS:
+*               AG7100_PHY_SPEED_10T, AG7100_PHY_SPEED_100TX;
+*               AG7100_PHY_SPEED_1000T;
+*/
+
+BOOL
+athrs26_phy_speed(int ethUnit)
+{
+    int         phyUnit;
+    uint16_t    phyHwStatus;
+    uint32_t    phyBase;
+    uint32_t    phyAddr;
+    int         ii = 200;
+    
+    if (ethUnit == ENET_UNIT_LAN)
+        return _100BASET;
+
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        if (athrs26_phy_is_link_alive(phyUnit)) {
+
+            phyBase = ATHR_PHYBASE(phyUnit);
+            phyAddr = ATHR_PHYADDR(phyUnit);
+            
+            do {
+                phy_reg_read(phyBase, phyAddr, 
+                                           ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+                sysMsDelay(10);
+            }while((!(phyHwStatus & ATHR_STATUS_RESOVLED)) && --ii);
+
+            phyHwStatus = ((phyHwStatus & ATHER_STATUS_LINK_MASK) >>
+                           ATHER_STATUS_LINK_SHIFT);
+
+            switch(phyHwStatus) {
+            case 0:
+                return _10BASET;
+            case 1:
+                return _100BASET;
+            case 2:
+                return _1000BASET;
+            default:
+                DRV_PRINT(DRV_DEBUG_PHYERROR, ("Unkown speed read!\n"));
+            }
+        }
+    }
+
+    return _10BASET;
+}
+
+/*****************************************************************************
+*
+* athr_phy_is_up -- checks for significant changes in PHY state.
+*
+* A "significant change" is:
+*     dropped link (e.g. ethernet cable unplugged) OR
+*     autonegotiation completed + link (e.g. ethernet cable plugged in)
+*
+* When a PHY is plugged in, phyLinkGained is called.
+* When a PHY is unplugged, phyLinkLost is called.
+*/
+
+int
+athrs26_phy_is_up(int ethUnit)
+{
+    int             phyUnit;
+    uint16_t        phyHwStatus;
+    athrPhyInfo_t  *lastStatus;
+    int             linkCount   = 0;
+    int             lostLinks   = 0;
+    int             gainedLinks = 0;
+    uint32_t        phyBase;
+    uint32_t        phyAddr;
+#ifdef CFG_ATHRHDR_REG
+    /* if using header to config s26, the link of MAC0 should always be up */
+    if (ethUnit == ENET_UNIT_LAN)
+        return 1;
+#endif
+
+    for (phyUnit=0; phyUnit < ATHR_PHY_MAX; phyUnit++) {
+        if (!ATHR_IS_ETHUNIT(phyUnit, ethUnit)) {
+            continue;
+        }
+
+        phyBase = ATHR_PHYBASE(phyUnit);
+        phyAddr = ATHR_PHYADDR(phyUnit);
+
+
+        lastStatus = &athrPhyInfo[phyUnit];
+        phy_reg_read(phyBase, phyAddr, ATHR_PHY_SPEC_STATUS, &phyHwStatus);
+
+        if (lastStatus->isPhyAlive) { /* last known link status was ALIVE */
+            /* See if we've lost link */
+            if (phyHwStatus & ATHR_STATUS_LINK_PASS) {
+                linkCount++;
+            } else {
+                lostLinks++;
+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d down\n",
+                                               ethUnit, phyUnit));
+                lastStatus->isPhyAlive = FALSE;
+            }
+        } else { /* last known link status was DEAD */
+            /* Check for reset complete */
+            phy_reg_read(phyBase, phyAddr, ATHR_PHY_STATUS, &phyHwStatus);
+            if (!ATHR_RESET_DONE(phyHwStatus))
+                continue;
+
+            /* Check for AutoNegotiation complete */            
+            if (ATHR_AUTONEG_DONE(phyHwStatus)) {
+                //printk("autoneg done\n");
+                gainedLinks++;
+                linkCount++;
+                DRV_PRINT(DRV_DEBUG_PHYCHANGE,("\nenet%d port%d up\n",
+                                               ethUnit, phyUnit));
+                lastStatus->isPhyAlive = TRUE;
+            }
+        }
+    }
+
+    return (linkCount);
+
+#if 0
+    if (linkCount == 0) {
+        if (lostLinks) {
+            /* We just lost the last link for this MAC */
+            phyLinkLost(ethUnit);
+        }
+    } else {
+        if (gainedLinks == linkCount) {
+            /* We just gained our first link(s) for this MAC */
+            phyLinkGained(ethUnit);
+        }
+    }
+#endif
+}
+
+#ifdef CFG_ATHRHDR_EN
+void athr_hdr_timeout(void){
+       eth_halt();
+        NetState = NETLOOP_FAIL; 
+}
+
+void athr_hdr_handler(uchar *recv_pkt, unsigned dest, unsigned src, unsigned len){
+       header_receive_pkt(recv_pkt);
+       NetState = NETLOOP_SUCCESS;
+}
+static int
+athrs26_header_config_reg (struct eth_device *dev, uint8_t wr_flag,
+                           uint16_t reg_addr, uint16_t cmd_len,
+                           uint8_t *val)
+{
+    at_header_t at_header;
+    reg_cmd_t reg_cmd;
+    uchar *AthrHdrPkt;
+
+    AthrHdrPkt = NetTxPacket;
+
+    if(AthrHdrPkt == NULL) {
+               printf("Null packet\n");
+               return;
+    }
+    memset(AthrHdrPkt,0,60);
+
+    /*fill at_header*/
+    at_header.reserved0 = 0x10;  //default
+    at_header.priority = 0;
+    at_header.type = 0x5;
+    at_header.broadcast = 0;
+    at_header.from_cpu = 1;
+    at_header.reserved1 = 0x01; //default
+    at_header.port_num = 0;
+
+    AthrHdrPkt[0] = at_header.port_num;
+    AthrHdrPkt[0] |= at_header.reserved1 << 4;
+    AthrHdrPkt[0] |= at_header.from_cpu << 6;
+    AthrHdrPkt[0] |= at_header.broadcast << 7;
+
+    AthrHdrPkt[1] = at_header.type;
+    AthrHdrPkt[1] |= at_header.priority << 4;
+    AthrHdrPkt[1] |= at_header.reserved0 << 6;
+
+
+    /*fill reg cmd*/
+    if(cmd_len > 4)
+        cmd_len = 4;//only support 32bits register r/w
+
+    reg_cmd.reg_addr = reg_addr&0x3FFFC;
+    reg_cmd.cmd_len = cmd_len;
+    reg_cmd.cmd = wr_flag;
+    reg_cmd.reserved2 = 0x5; //default
+    reg_cmd.seq_num = seqcnt;
+
+    AthrHdrPkt[2] = reg_cmd.reg_addr & 0xff;
+    AthrHdrPkt[3] = (reg_cmd.reg_addr & 0xff00) >> 8;
+    AthrHdrPkt[4] = (reg_cmd.reg_addr & 0x30000) >> 16;
+    AthrHdrPkt[4] |= reg_cmd.cmd_len << 4;
+    AthrHdrPkt[5] = reg_cmd.cmd << 4;
+    AthrHdrPkt[5] |= reg_cmd.reserved2 << 5;
+    AthrHdrPkt[6] = (reg_cmd.seq_num & 0x7f) << 1;
+    AthrHdrPkt[7] = (reg_cmd.seq_num & 0x7f80) >> 7;
+    AthrHdrPkt[8] = (reg_cmd.seq_num & 0x7f8000) >> 15;
+    AthrHdrPkt[9] = (reg_cmd.seq_num & 0x7f800000) >> 23;
+
+    /*fill reg data*/
+    if(!wr_flag)//write
+        memcpy((AthrHdrPkt + 10), val, cmd_len);
+    
+    /*start xmit*/
+    if(dev == NULL) {
+       printf("ERROR device not found\n");
+       return -1;
+    }
+    header_xmit(dev, AthrHdrPkt ,60);
+    return 0;
+}
+void athr_hdr_func(void) {
+
+   NetSetTimeout (1 * CFG_HZ,athr_hdr_timeout );
+   NetSetHandler (athr_hdr_handler);
+
+   if(cmd) 
+       athrs26_header_config_reg(lan_mac, cmd, cmd_read.reg_addr, cmd_read.cmd_len, cmd_read.reg_data);
+   else 
+        athrs26_header_config_reg(lan_mac, cmd, cmd_write.reg_addr, cmd_write.cmd_len, cmd_write.reg_data);
+}
+static int
+athrs26_header_write_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
+{
+    int i = 2;
+    cmd_write.reg_addr = reg_addr;
+    cmd_write.cmd_len = cmd_len;
+    cmd_write.reg_data = reg_data;
+    cmd = 0;
+    seqcnt++;
+
+    do {
+       if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
+          break;
+    } while (i--);
+
+    return i;
+}
+
+static int
+athrs26_header_read_reg(uint16_t reg_addr, uint16_t cmd_len, uint8_t *reg_data)
+{
+    int i = 2;
+
+    cmd_read.reg_addr = reg_addr;
+    cmd_read.cmd_len = cmd_len;
+    cmd_read.reg_data = reg_data;
+    cmd = 1;
+    seqcnt++;
+
+    do {
+        if (NetLoop(ATHRHDR) >= 0) /* polls for read/write ack from PHY */
+           break;
+    } while (i--);
+
+    if ((i==0) || (seqcnt != cmd_resp.seq) || (cmd_len != cmd_resp.len)) {
+        return -1;
+    }
+    memcpy (cmd_read.reg_data, cmd_resp.data, cmd_len);
+    return 0;
+}
+int header_receive_pkt(uchar *recv_pkt)
+{
+    cmd_resp.len = recv_pkt[4] >> 4;
+    if (cmd_resp.len > 10)
+        goto out;
+
+    cmd_resp.seq = recv_pkt[6] >> 1;
+    cmd_resp.seq |= recv_pkt[7] << 7;
+    cmd_resp.seq |= recv_pkt[8] << 15;
+    cmd_resp.seq |= recv_pkt[9] << 23;
+
+    if (cmd_resp.seq < seqcnt)
+        goto out;
+    memcpy (cmd_resp.data, (recv_pkt + 10), cmd_resp.len);
+out:
+     return 0;
+}
+
+void athrs26_reg_dev(struct eth_device *mac)
+{
+    lan_mac = mac;
+}
+
+#endif
+
+static uint32_t
+athrs26_reg_read(uint16_t reg_addr)
+{
+#ifndef CFG_ATHRHDR_REG
+    uint16_t reg_word_addr = reg_addr / 2, phy_val;
+    uint32_t phy_addr;
+    uint8_t phy_reg; 
+    
+    /* configure register high address */
+    phy_addr = 0x18;
+    phy_reg = 0x0;
+    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
+    phy_reg_write (0, phy_addr, phy_reg, phy_val);
+
+    /* read register with low address */
+    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address*/
+    phy_reg_read(0, phy_addr, phy_reg, &phy_val);
+    
+    return phy_val;
+#else
+    uint8_t reg_data[4];
+
+    memset (reg_data, 0, 4);
+    athrs26_header_read_reg(reg_addr, 4, reg_data);
+    return (reg_data[0] | (reg_data[1] << 8) | (reg_data[2] << 16) | (reg_data[3] << 24));
+#endif
+}
+
+static void
+athrs26_reg_write(uint16_t reg_addr, uint32_t reg_val)
+{
+#ifndef CFG_ATHRHDR_REG
+    uint16_t reg_word_addr = reg_addr / 2, phy_val;
+    uint32_t phy_addr;
+    uint8_t phy_reg; 
+
+    /* configure register high address */
+    phy_addr = 0x18;
+    phy_reg = 0x0;
+    phy_val = (reg_word_addr >> 8) & 0x1ff;         /* bit16-8 of reg address*/
+    phy_reg_write (0, phy_addr, phy_reg, phy_val);
+
+    /* read register with low address */
+    phy_addr = 0x10 | ((reg_word_addr >> 5) & 0x7); /* bit7-5 of reg address */
+    phy_reg = reg_word_addr & 0x1f;                 /* bit 4-0 of reg address */
+    phy_reg_write (0, phy_addr, phy_reg, reg_val);
+#else
+    uint8_t reg_data[4];
+
+    memset (reg_data, 0, 4);
+    reg_data[0] = (uint8_t)(0x00ff & reg_val);
+    reg_data[1] = (uint8_t)((0xff00 & reg_val) >> 8);
+    reg_data[2] = (uint8_t)((0xff0000 & reg_val) >> 16);
+    reg_data[3] = (uint8_t)((0xff000000 & reg_val) >> 24);
+
+    athrs26_header_write_reg (reg_addr, 4, reg_data);
+#endif
+
+}
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.h b/package/uboot-lantiq/files/board/arcadyan/athrs26_phy.h
new file mode 100644 (file)
index 0000000..0fdde37
--- /dev/null
@@ -0,0 +1,134 @@
+#ifndef _ATHRS26_PHY_H
+#define _ATHRS26_PHY_H
+
+/*****************/
+/* PHY Registers */
+/*****************/
+#define ATHR_PHY_CONTROL                 0
+#define ATHR_PHY_STATUS                  1
+#define ATHR_PHY_ID1                     2
+#define ATHR_PHY_ID2                     3
+#define ATHR_AUTONEG_ADVERT              4
+#define ATHR_LINK_PARTNER_ABILITY        5
+#define ATHR_AUTONEG_EXPANSION           6
+#define ATHR_NEXT_PAGE_TRANSMIT          7
+#define ATHR_LINK_PARTNER_NEXT_PAGE      8
+#define ATHR_1000BASET_CONTROL           9
+#define ATHR_1000BASET_STATUS            10
+#define ATHR_PHY_SPEC_CONTROL            16
+#define ATHR_PHY_SPEC_STATUS             17
+#define ATHR_DEBUG_PORT_ADDRESS          29
+#define ATHR_DEBUG_PORT_DATA             30
+
+/* ATHR_PHY_CONTROL fields */
+#define ATHR_CTRL_SOFTWARE_RESET                    0x8000
+#define ATHR_CTRL_SPEED_LSB                         0x2000
+#define ATHR_CTRL_AUTONEGOTIATION_ENABLE            0x1000
+#define ATHR_CTRL_RESTART_AUTONEGOTIATION           0x0200
+#define ATHR_CTRL_SPEED_FULL_DUPLEX                 0x0100
+#define ATHR_CTRL_SPEED_MSB                         0x0040
+
+#define ATHR_RESET_DONE(phy_control)                   \
+    (((phy_control) & (ATHR_CTRL_SOFTWARE_RESET)) == 0)
+    
+/* Phy status fields */
+#define ATHR_STATUS_AUTO_NEG_DONE                   0x0020
+
+#define ATHR_AUTONEG_DONE(ip_phy_status)                   \
+    (((ip_phy_status) &                                  \
+        (ATHR_STATUS_AUTO_NEG_DONE)) ==                    \
+        (ATHR_STATUS_AUTO_NEG_DONE))
+        
+/* Link Partner ability */
+#define ATHR_LINK_100BASETX_FULL_DUPLEX       0x0100
+#define ATHR_LINK_100BASETX                   0x0080
+#define ATHR_LINK_10BASETX_FULL_DUPLEX        0x0040
+#define ATHR_LINK_10BASETX                    0x0020
+
+/* Advertisement register. */
+#define ATHR_ADVERTISE_NEXT_PAGE              0x8000
+#define ATHR_ADVERTISE_ASYM_PAUSE             0x0800
+#define ATHR_ADVERTISE_PAUSE                  0x0400
+#define ATHR_ADVERTISE_100FULL                0x0100
+#define ATHR_ADVERTISE_100HALF                0x0080  
+#define ATHR_ADVERTISE_10FULL                 0x0040  
+#define ATHR_ADVERTISE_10HALF                 0x0020  
+
+#define ATHR_ADVERTISE_ALL (ATHR_ADVERTISE_10HALF | ATHR_ADVERTISE_10FULL | \
+                            ATHR_ADVERTISE_100HALF | ATHR_ADVERTISE_100FULL)
+                       
+/* 1000BASET_CONTROL */
+#define ATHR_ADVERTISE_1000FULL               0x0200
+
+/* Phy Specific status fields */
+#define ATHER_STATUS_LINK_MASK                0xC000
+#define ATHER_STATUS_LINK_SHIFT               14
+#define ATHER_STATUS_FULL_DEPLEX              0x2000
+#define ATHR_STATUS_LINK_PASS                 0x0400
+#define ATHR_STATUS_RESOVLED                  0x0800
+
+/*phy debug port  register */
+#define ATHER_DEBUG_SERDES_REG                5
+
+/* Serdes debug fields */
+#define ATHER_SERDES_BEACON                   0x0100
+
+#ifndef BOOL
+#define BOOL    int
+#define TRUE    1
+#define FALSE   0
+#endif
+
+#define sysMsDelay(_x) udelay((_x) * 1000)
+
+#undef S26_VER_1_0
+
+#ifdef CFG_ATHRHDR_EN
+
+#include <net.h>
+#define header_xmit(dev,pkt,len) dev->send(dev,pkt,len) //dev_queue_xmit(skb)
+#define header_recv_ack(dev) dev->recv(dev) //dev_queue_xmit(skb)
+
+typedef enum {
+    NORMAL_PACKET,
+    RESERVED0,
+    MIB_1ST,
+    RESERVED1,
+    RESERVED2,
+    READ_WRITE_REG,
+    READ_WRITE_REG_ACK,
+    RESERVED3
+} ATHR_HDR_TYPE;
+
+typedef struct {
+    uint16_t    reserved0;
+    uint16_t    priority;
+    uint16_t    type ;
+    uint16_t    broadcast;
+    uint16_t    from_cpu;
+    uint16_t    reserved1;
+    uint16_t    port_num;
+}at_header_t;
+
+typedef struct {
+    uint64_t    reg_addr;
+    uint64_t    reserved0;
+    uint64_t    cmd_len;
+    uint64_t    reserved1;
+    uint64_t    cmd;
+    uint64_t    reserved2;
+    uint64_t    seq_num;
+}reg_cmd_t;
+void athrs26_reg_init(void);
+int header_receive_pkt(uchar *pkt);
+void athrs26_reg_dev(struct eth_device *mac);
+
+#endif
+
+int athrs26_phy_is_up(int unit);
+int athrs26_phy_is_fdx(int unit);
+int athrs26_phy_speed(int unit);
+BOOL athrs26_phy_setup(int unit);
+
+#endif /* _ATHRS26_PHY_H */
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/board.c b/package/uboot-lantiq/files/board/arcadyan/board.c
new file mode 100644 (file)
index 0000000..cf0cbce
--- /dev/null
@@ -0,0 +1,406 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Thomas Langer, Ralph Hempel
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/addrspace.h>
+#include <asm/danube.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+#if defined(CONFIG_CMD_HTTPD)
+#include <httpd.h>
+#endif
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_AR8216_SWITCH)
+#include "athrs26_phy.h"
+#endif
+
+extern ulong ifx_get_ddr_hz(void);
+extern ulong ifx_get_cpuclk(void);
+
+/* IDs and registers of known external switches */
+void _machine_restart(void)
+{
+       *DANUBE_RCU_RST_REQ |=1<<30;
+}
+
+#ifdef CONFIG_SYS_RAMBOOT
+phys_size_t initdram(int board_type)
+{
+       return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
+}
+#elif defined(CONFIG_USE_DDR_RAM)
+phys_size_t initdram(int board_type)
+{
+       return (CONFIG_SYS_MAX_RAM);
+}
+#else
+
+static ulong max_sdram_size(void)     /* per Chip Select */
+{
+       /* The only supported SDRAM data width is 16bit.
+        */
+#define CFG_DW 4
+
+       /* The only supported number of SDRAM banks is 4.
+        */
+#define CFG_NB 4
+
+       ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
+       int   cols   = cfgpb0 & 0xF;
+       int   rows   = (cfgpb0 & 0xF0) >> 4;
+       ulong size   = (1 << (rows + cols)) * CFG_DW * CFG_NB;
+
+       return size;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ */
+
+static long int dram_size(long int *base, long int maxsize)
+{
+       volatile long int *addr;
+       ulong cnt, val;
+       ulong save[32];                 /* to make test non-destructive */
+       unsigned char i = 0;
+
+       for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+               addr = base + cnt;              /* pointer arith! */
+
+               save[i++] = *addr;
+               *addr = ~cnt;
+       }
+
+       /* write 0 to base address */
+       addr = base;
+       save[i] = *addr;
+       *addr = 0;
+
+       /* check at base address */
+       if ((val = *addr) != 0) {
+               *addr = save[i];
+               return (0);
+       }
+
+       for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+               addr = base + cnt;              /* pointer arith! */
+
+               val = *addr;
+               *addr = save[--i];
+
+               if (val != (~cnt)) {
+                       return (cnt * sizeof (long));
+               }
+       }
+       return (maxsize);
+}
+
+phys_size_t initdram(int board_type)
+{
+       int   rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
+       ulong size, max_size       = 0;
+       ulong our_address;
+
+       /* load t9 into our_address */
+       asm volatile ("move %0, $25" : "=r" (our_address) :);
+
+       /* Can't probe for RAM size unless we are running from Flash.
+        * find out whether running from DRAM or Flash.
+        */
+       if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
+       {
+               return max_sdram_size();
+       }
+
+       for (cols = 0x8; cols <= 0xC; cols++)
+       {
+               for (rows = 0xB; rows <= 0xD; rows++)
+               {
+                       *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
+                                                 (rows << 4) | cols;
+                       size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+                                                 max_sdram_size());
+
+                       if (size > max_size)
+                       {
+                               best_val = *DANUBE_SDRAM_MC_CFGPB0;
+                               max_size = size;
+                       }
+               }
+       }
+
+       *DANUBE_SDRAM_MC_CFGPB0 = best_val;
+       return max_size;
+}
+#endif
+
+static void gpio_default(void)
+{
+#ifdef CONFIG_SWITCH_PORT0
+       *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
+#elif defined(CONFIG_SWITCH_PORT1)
+       *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
+       *DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
+#endif
+#ifdef CONFIG_EBU_GPIO
+       {
+               int i = 0;
+               printf ("bring up ebu gpio\n");
+               *DANUBE_EBU_BUSCON1 = 0x1e7ff;
+               *DANUBE_EBU_ADDSEL1 = 0x14000001;
+
+               *((volatile u16*)0xb4000000) = 0x0;
+               for(i = 0; i < 1000; i++)
+                       udelay(1000);
+               *((volatile u16*)0xb4000000) = CONFIG_EBU_GPIO;
+               *DANUBE_EBU_BUSCON1 = 0x8001e7ff;
+       }
+#endif
+#ifdef CONFIG_BUTTON_PORT0
+       *DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+       *DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+       *DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+       if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+       {
+               printf("button is pressed\n");
+               setenv("bootdelay", "0");
+               setenv("bootcmd", "httpd");
+       }
+#elif defined(CONFIG_BUTTON_PORT1)
+       *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
+       *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
+       *DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
+       if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
+       {
+               printf("button is pressed\n");
+               setenv("bootdelay", "0");
+               setenv("bootcmd", "httpd");
+       }
+#endif
+
+}
+
+int checkboard (void)
+{
+       unsigned long chipid = *DANUBE_MPS_CHIPID;
+       int part_num;
+
+       puts ("Board: "CONFIG_ARCADYAN"\n");
+       puts ("SoC: ");
+
+       part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
+       switch (part_num)
+       {
+       case 0x129:
+       case 0x12D:
+       case 0x12b: 
+               puts("Danube/Twinpass/Vinax-VE ");
+               break;
+       default:
+               printf ("unknown, chip part number 0x%03X ", part_num);
+               break;
+       }
+       printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
+
+       printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
+       printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
+
+
+       return 0;
+}
+
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
+int board_early_init_f(void)
+{
+#ifdef CONFIG_EBU_ADDSEL0
+       (*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
+#endif
+#ifdef CONFIG_EBU_ADDSEL1
+       (*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
+#endif
+#ifdef CONFIG_EBU_ADDSEL2
+       (*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
+#endif
+#ifdef CONFIG_EBU_ADDSEL3
+       (*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
+#endif
+#ifdef CONFIG_EBU_BUSCON0
+       (*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
+#endif
+#ifdef CONFIG_EBU_BUSCON1
+       (*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
+#endif
+#ifdef CONFIG_EBU_BUSCON2
+       (*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
+#endif
+#ifdef CONFIG_EBU_BUSCON3
+       (*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
+#endif
+
+       return 0;
+}
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifdef CONFIG_RTL8306_SWITCH
+#define ID_RTL8306     0x5988
+static int external_switch_rtl8306(void)
+{
+       unsigned short chipid;
+       static char * const name = "lq_cpe_eth";
+
+       udelay(100000);
+
+       puts("\nsearching for rtl8306 switch ... ");
+       if (miiphy_read(name, 4, 30, &chipid) == 0) {
+               if (chipid == ID_RTL8306) {
+                       puts("found");
+                       /* set led mode */
+                       miiphy_write(name, 0, 19, 0xffff);
+                       /* magic */
+                       miiphy_write(name, 4, 22, 0x877f);
+                       puts("\n");
+                       return 0;
+               }
+               puts("failed\n");
+       }
+       puts("\nno known switch found ... \n");
+
+       return 0;
+}
+#endif
+
+#ifdef CONFIG_AR8216_SWITCH
+static int external_switch_ar8216(void)
+{
+       puts("initializing ar8216 switch... ");
+       if (athrs26_phy_setup(0)==0) {
+          printf("initialized\n");
+          return 0;
+       }
+       puts("failed ... \n");
+       return 0;
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+       gpio_default();
+
+#if defined(CONFIG_IFX_ETOP)
+       uchar enetaddr[6];
+       if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+               eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
+
+       *DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
+       *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
+
+       if (lq_eth_initialize(bis))
+               return -1;
+
+       *DANUBE_RCU_RST_REQ |=1;
+       udelay(200000);
+       *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
+       udelay(1000);
+
+#ifdef CONFIG_RTL8306_SWITCH
+       if (external_switch_rtl8306()<0)
+               return -1;
+#endif
+#ifdef CONFIG_AR8216_SWITCH
+       if (external_switch_ar8216()<0)
+               return -1;
+#endif
+#endif
+       return 0;
+}
+
+#if defined(CONFIG_CMD_HTTPD)
+int do_http_upgrade(const unsigned char *data, const ulong size)
+{
+       char buf[128];
+
+       if(getenv ("ram_addr") == NULL)
+               return -1;
+       if(getenv ("kernel_addr") == NULL)
+               return -1;
+       /* check the image */
+       if(run_command("imi ${ram_addr}", 0) < 0) {
+               return -1;
+       }
+       /* write the image to the flash */
+       puts("http ugrade ...\n");
+       sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
+       return run_command(buf, 0);
+}
+
+int do_http_progress(const int state)
+{
+       /* toggle LED's here */
+       switch(state) {
+               case HTTP_PROGRESS_START:
+               puts("http start\n");
+               break;
+               case HTTP_PROGRESS_TIMEOUT:
+               puts(".");
+               break;
+               case HTTP_PROGRESS_UPLOAD_READY:
+               puts("http upload ready\n");
+               break;
+               case HTTP_PROGRESS_UGRADE_READY:
+               puts("http ugrade ready\n");
+               break;
+               case HTTP_PROGRESS_UGRADE_FAILED:
+               puts("http ugrade failed\n");
+               break;
+       }
+       return 0;
+}
+
+unsigned long do_http_tmp_address(void)
+{
+       char *s = getenv ("ram_addr");
+       if (s) {
+               ulong tmp = simple_strtoul (s, NULL, 16);
+               return tmp;
+       }
+       return 0 /*0x80a00000*/;
+}
+
+#endif
diff --git a/package/uboot-lantiq/files/board/arcadyan/config.mk b/package/uboot-lantiq/files/board/arcadyan/config.mk
new file mode 100644 (file)
index 0000000..c0e5d82
--- /dev/null
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Danube board with MIPS 24Kc CPU core
+#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifdef CONFIG_LZMA_BOOTSTRAP
+
+ifdef BUILD_BOOTSTRAP
+
+$(info BUILD_BOOTSTRAP )
+#TEXT_BASE = 0xB0000000
+TEXT_BASE = 0x80010000
+
+else # BUILD_BOOTSTRAP
+
+ifndef TEXT_BASE
+$(info redefine TEXT_BASE = 0x80040000 )
+TEXT_BASE = 0x80040000
+endif
+
+endif # BUILD_BOOTSTRAP
+
+else
+
+ifdef BUILD_BOOTSTRAP
+$(error BUILD_BOOTSTRAP but not enabled in config)
+endif
+
+ifndef TEXT_BASE
+## Standard: boot from ebu
+$(info redefine TEXT_BASE = 0xB0000000 )
+TEXT_BASE = 0xB0000000
+## For testing: boot from RAM
+# TEXT_BASE = 0x80100000
+endif
+
+endif # CONFIG_LZMA_BOOTSTRAP
diff --git a/package/uboot-lantiq/files/board/arcadyan/ddr_settings.h b/package/uboot-lantiq/files/board/arcadyan/ddr_settings.h
new file mode 100644 (file)
index 0000000..4df6f11
--- /dev/null
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
+
+#define MC_DC0_VALUE   0x1B1B
+#define MC_DC1_VALUE   0x0
+#define MC_DC2_VALUE   0x0
+#define MC_DC3_VALUE   0x0
+#define MC_DC4_VALUE   0x0
+#define MC_DC5_VALUE   0x200
+#define MC_DC6_VALUE   0x605
+#define MC_DC7_VALUE   0x303
+#define MC_DC8_VALUE   0x102
+#define MC_DC9_VALUE   0x70a
+#define MC_DC10_VALUE  0x203
+#define MC_DC11_VALUE  0xc02
+#define MC_DC12_VALUE  0x1C8
+#define MC_DC13_VALUE  0x1
+#define MC_DC14_VALUE  0x0
+#define MC_DC15_VALUE  0x130  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE  0xC800
+#define MC_DC17_VALUE  0xd
+#define MC_DC18_VALUE  0x301
+#define MC_DC19_VALUE  0x200
+#define MC_DC20_VALUE  0xA03  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE  0x1b00
+#define MC_DC22_VALUE  0x1b1b
+#define MC_DC23_VALUE  0x0
+#define MC_DC24_VALUE  0x59   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE  0x0
+#define MC_DC26_VALUE  0x0
+#define MC_DC27_VALUE  0x0
+#define MC_DC28_VALUE  0x510
+#define MC_DC29_VALUE  0x4e20
+#define MC_DC30_VALUE  0x8235
+#define MC_DC31_VALUE  0x0
+#define MC_DC32_VALUE  0x0
+#define MC_DC33_VALUE  0x0
+#define MC_DC34_VALUE  0x0
+#define MC_DC35_VALUE  0x0
+#define MC_DC36_VALUE  0x0
+#define MC_DC37_VALUE  0x0
+#define MC_DC38_VALUE  0x0
+#define MC_DC39_VALUE  0x0
+#define MC_DC40_VALUE  0x0
+#define MC_DC41_VALUE  0x0
+#define MC_DC42_VALUE  0x0
+#define MC_DC43_VALUE  0x0
+#define MC_DC44_VALUE  0x0
+#define MC_DC45_VALUE  0x500
+#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/ddr_settings_psc_166.h b/package/uboot-lantiq/files/board/arcadyan/ddr_settings_psc_166.h
new file mode 100644 (file)
index 0000000..445b7da
--- /dev/null
@@ -0,0 +1,51 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
+
+#define MC_DC0_VALUE   0x1B1B
+#define MC_DC1_VALUE   0x0
+#define MC_DC2_VALUE   0x0
+#define MC_DC3_VALUE   0x0
+#define MC_DC4_VALUE   0x0
+#define MC_DC5_VALUE   0x200
+#define MC_DC6_VALUE   0x605
+#define MC_DC7_VALUE   0x303
+#define MC_DC8_VALUE   0x102
+#define MC_DC9_VALUE   0x70a
+#define MC_DC10_VALUE  0x203
+#define MC_DC11_VALUE  0xc02
+#define MC_DC12_VALUE  0x1C8
+#define MC_DC13_VALUE  0x1
+#define MC_DC14_VALUE  0x0
+#define MC_DC15_VALUE  0x120  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE  0xC800
+#define MC_DC17_VALUE  0xd
+#define MC_DC18_VALUE  0x301
+#define MC_DC19_VALUE  0x200
+#define MC_DC20_VALUE  0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE  0x1700
+#define MC_DC22_VALUE  0x1717
+#define MC_DC23_VALUE  0x0
+#define MC_DC24_VALUE  0x52   /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE  0x0
+#define MC_DC26_VALUE  0x0
+#define MC_DC27_VALUE  0x0
+#define MC_DC28_VALUE  0x510
+#define MC_DC29_VALUE  0x4e20
+#define MC_DC30_VALUE  0x8235
+#define MC_DC31_VALUE  0x0
+#define MC_DC32_VALUE  0x0
+#define MC_DC33_VALUE  0x0
+#define MC_DC34_VALUE  0x0
+#define MC_DC35_VALUE  0x0
+#define MC_DC36_VALUE  0x0
+#define MC_DC37_VALUE  0x0
+#define MC_DC38_VALUE  0x0
+#define MC_DC39_VALUE  0x0
+#define MC_DC40_VALUE  0x0
+#define MC_DC41_VALUE  0x0
+#define MC_DC42_VALUE  0x0
+#define MC_DC43_VALUE  0x0
+#define MC_DC44_VALUE  0x0
+#define MC_DC45_VALUE  0x500
+//#define MC_DC45_VALUE        0x400
+#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/ddr_settings_qimonda.h b/package/uboot-lantiq/files/board/arcadyan/ddr_settings_qimonda.h
new file mode 100644 (file)
index 0000000..e1ab36d
--- /dev/null
@@ -0,0 +1,50 @@
+/* Settings for Denali DDR SDRAM controller */
+/* Optimise for DDR PSC A3S12D40ETP for arv4518pw Danube Board DDR 166 Mhz - by Ngp 14th Sept. 2010 */
+
+#define MC_DC0_VALUE   0x1B1B
+#define MC_DC1_VALUE   0xc0
+#define MC_DC2_VALUE   0x0
+#define MC_DC3_VALUE   0x100
+#define MC_DC4_VALUE   0xd0f
+#define MC_DC5_VALUE   0x204
+#define MC_DC6_VALUE   0x605
+#define MC_DC7_VALUE   0x303
+#define MC_DC8_VALUE   0x102
+#define MC_DC9_VALUE   0x70a
+#define MC_DC10_VALUE  0x203
+#define MC_DC11_VALUE  0xc02
+#define MC_DC12_VALUE  0x1C8
+#define MC_DC13_VALUE  0x1
+#define MC_DC14_VALUE  0x0
+#define MC_DC15_VALUE  0xf3c  /* WDQS tuning for clk_wr*/
+#define MC_DC16_VALUE  0xC800
+#define MC_DC17_VALUE  0xd
+#define MC_DC18_VALUE  0x300
+#define MC_DC19_VALUE  0x200
+#define MC_DC20_VALUE  0xA04  /* A04 for reference board, A03 for Eval board */
+#define MC_DC21_VALUE  0xd47
+#define MC_DC22_VALUE  0xd0d
+#define MC_DC23_VALUE  0x0
+#define MC_DC24_VALUE  0x62  /* WDQS Tuning for DQS */
+#define MC_DC25_VALUE  0x0
+#define MC_DC26_VALUE  0x0
+#define MC_DC27_VALUE  0x2040
+#define MC_DC28_VALUE  0x510
+#define MC_DC29_VALUE  0x2d89
+#define MC_DC30_VALUE  0x8300
+#define MC_DC31_VALUE  0x0
+#define MC_DC32_VALUE  0x0
+#define MC_DC33_VALUE  0x0
+#define MC_DC34_VALUE  0x0
+#define MC_DC35_VALUE  0x0
+#define MC_DC36_VALUE  0x0
+#define MC_DC37_VALUE  0x0
+#define MC_DC38_VALUE  0x0
+#define MC_DC39_VALUE  0x0
+#define MC_DC40_VALUE  0x0
+#define MC_DC41_VALUE  0x0
+#define MC_DC42_VALUE  0x0
+#define MC_DC43_VALUE  0x0
+#define MC_DC44_VALUE  0x0
+#define MC_DC45_VALUE  0x500
+#define MC_DC46_VALUE  0x0
diff --git a/package/uboot-lantiq/files/board/arcadyan/lowlevel_init.S b/package/uboot-lantiq/files/board/arcadyan/lowlevel_init.S
new file mode 100644 (file)
index 0000000..2f2c225
--- /dev/null
@@ -0,0 +1,622 @@
+/*
+ *  Memory sub-system initialization code for Danube board.
+ *  Andre Messerschmidt
+ *  Copyright (c) 2005 Infineon Technologies AG
+ *
+ *  Based on Inca-IP code
+ *  Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* History:
+      peng liu May 25, 2006, for PLL setting after reset, 05252006
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#if 0
+
+#if defined(CONFIG_USE_DDR_RAM)
+
+#if defined(CONFIG_USE_DDR_RAM_CFG_111M)
+#include "ddr_settings_r111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_166M)
+#include "ddr_settings_r166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M)
+#include "ddr_settings_e111.h"
+#define DDR111
+#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M)
+#include "ddr_settings_e166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400)
+#include "ddr_settings_PROMOSDDR400.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166)
+#include "ddr_settings_Samsung_166.h"
+#define DDR166
+#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166)
+#include "ddr_settings_psc_166.h"
+#define DDR166
+#else
+#warning "missing definition for ddr_settings.h, use default!"
+#include "ddr_settings.h"
+#endif
+#endif /* CONFIG_USE_DDR_RAM */
+
+#else
+
+#include "ddr_settings_psc_166.h"
+#define DDR166
+
+#endif
+
+#if defined(CONFIG_USE_DDR_RAM) &&  !defined(MC_DC0_VALUE)
+#error "missing include of ddr_settings.h"
+#endif
+
+#define EBU_MODUL_BASE         0xBE105300
+#define EBU_CLC(value)         0x0000(value)
+#define EBU_CON(value)         0x0010(value)
+#define EBU_ADDSEL0(value)     0x0020(value)
+#define EBU_ADDSEL1(value)     0x0024(value)
+#define EBU_ADDSEL2(value)     0x0028(value)
+#define EBU_ADDSEL3(value)     0x002C(value)
+#define EBU_BUSCON0(value)     0x0060(value)
+#define EBU_BUSCON1(value)     0x0064(value)
+#define EBU_BUSCON2(value)     0x0068(value)
+#define EBU_BUSCON3(value)     0x006C(value)
+
+#define MC_MODUL_BASE          0xBF800000
+#define MC_ERRCAUSE(value)     0x0010(value)
+#define MC_ERRADDR(value)      0x0020(value)
+#define MC_CON(value)          0x0060(value)
+
+#define MC_SRAM_ENABLE         0x00000004
+#define MC_SDRAM_ENABLE                0x00000002
+#define MC_DDRRAM_ENABLE       0x00000001
+
+#define MC_SDR_MODUL_BASE      0xBF800200
+#define MC_IOGP(value)         0x0000(value)
+#define MC_CTRLENA(value)      0x0010(value)
+#define MC_MRSCODE(value)      0x0020(value)
+#define MC_CFGDW(value)                0x0030(value)
+#define MC_CFGPB0(value)       0x0040(value)
+#define MC_LATENCY(value)      0x0080(value)
+#define MC_TREFRESH(value)     0x0090(value)
+#define MC_SELFRFSH(value)     0x00A0(value)
+
+#define MC_DDR_MODUL_BASE      0xBF801000
+#define MC_DC00(value)         0x0000(value)
+#define MC_DC01(value)         0x0010(value)
+#define MC_DC02(value)         0x0020(value)
+#define MC_DC03(value)         0x0030(value)
+#define MC_DC04(value)         0x0040(value)
+#define MC_DC05(value)         0x0050(value)
+#define MC_DC06(value)         0x0060(value)
+#define MC_DC07(value)         0x0070(value)
+#define MC_DC08(value)         0x0080(value)
+#define MC_DC09(value)         0x0090(value)
+#define MC_DC10(value)         0x00A0(value)
+#define MC_DC11(value)         0x00B0(value)
+#define MC_DC12(value)         0x00C0(value)
+#define MC_DC13(value)         0x00D0(value)
+#define MC_DC14(value)         0x00E0(value)
+#define MC_DC15(value)         0x00F0(value)
+#define MC_DC16(value)         0x0100(value)
+#define MC_DC17(value)         0x0110(value)
+#define MC_DC18(value)         0x0120(value)
+#define MC_DC19(value)         0x0130(value)
+#define MC_DC20(value)         0x0140(value)
+#define MC_DC21(value)         0x0150(value)
+#define MC_DC22(value)         0x0160(value)
+#define MC_DC23(value)         0x0170(value)
+#define MC_DC24(value)         0x0180(value)
+#define MC_DC25(value)         0x0190(value)
+#define MC_DC26(value)         0x01A0(value)
+#define MC_DC27(value)         0x01B0(value)
+#define MC_DC28(value)         0x01C0(value)
+#define MC_DC29(value)         0x01D0(value)
+#define MC_DC30(value)         0x01E0(value)
+#define MC_DC31(value)         0x01F0(value)
+#define MC_DC32(value)         0x0200(value)
+#define MC_DC33(value)         0x0210(value)
+#define MC_DC34(value)         0x0220(value)
+#define MC_DC35(value)         0x0230(value)
+#define MC_DC36(value)         0x0240(value)
+#define MC_DC37(value)         0x0250(value)
+#define MC_DC38(value)         0x0260(value)
+#define MC_DC39(value)         0x0270(value)
+#define MC_DC40(value)         0x0280(value)
+#define MC_DC41(value)         0x0290(value)
+#define MC_DC42(value)         0x02A0(value)
+#define MC_DC43(value)         0x02B0(value)
+#define MC_DC44(value)         0x02C0(value)
+#define MC_DC45(value)         0x02D0(value)
+#define MC_DC46(value)         0x02E0(value)
+
+#define RCU_OFFSET  0xBF203000
+#define RCU_RST_REQ      (RCU_OFFSET + 0x0010)
+#define RCU_STS          (RCU_OFFSET + 0x0014)
+
+#define CGU_OFFSET  0xBF103000
+#define  PLL0_CFG     (CGU_OFFSET + 0x0004)
+#define  PLL1_CFG     (CGU_OFFSET + 0x0008)
+#define  PLL2_CFG     (CGU_OFFSET + 0x000C)
+#define  CGU_SYS      (CGU_OFFSET + 0x0010)
+#define  CGU_UPDATE   (CGU_OFFSET + 0x0014)
+#define  IF_CLK       (CGU_OFFSET + 0x0018)
+#define  CGU_SMD      (CGU_OFFSET + 0x0020)
+#define  CGU_CT1SR    (CGU_OFFSET + 0x0028)
+#define  CGU_CT2SR    (CGU_OFFSET + 0x002C)
+#define  CGU_PCMCR    (CGU_OFFSET + 0x0030)
+#define  PCI_CR_PCI   (CGU_OFFSET + 0x0034)
+#define  CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
+#define  CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
+#define  CLK_MEASURE  (CGU_OFFSET + 0x003C)
+
+//05252006
+#define  pll0_35MHz_CONFIG 0x9D861059
+#define  pll1_35MHz_CONFIG 0x1A260CD9
+#define  pll2_35MHz_CONFIG 0x8000f1e5
+#define  pll0_36MHz_CONFIG 0x1000125D
+#define  pll1_36MHz_CONFIG 0x1B1E0C99
+#define  pll2_36MHz_CONFIG 0x8002f2a1
+//05252006
+
+//06063001-joelin disable the PCI CFRAME mask -start
+/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
+But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
+
+The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
+The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
+*/
+#define PCI_CR_PR_OFFSET  0xBE105400
+#define PCI_CR_PCI_MOD_REG          (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CONFIG_SPACE  0xB7000000
+#define CS_CFM         (PCI_CONFIG_SPACE + 0x6C)
+//06063001-joelin disable the PCI CFRAME mask -end
+       .set    noreorder
+
+
+/*
+ * void ebu_init(void)
+ */
+       .globl  ebu_init
+       .ent    ebu_init
+ebu_init:
+
+#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \
+       defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \
+       defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \
+       defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3)
+
+       li      t1, EBU_MODUL_BASE
+#if defined(CONFIG_EBU_ADDSEL0)
+       li      t2, CONFIG_EBU_ADDSEL0
+       sw      t2, EBU_ADDSEL0(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL1)
+       li      t2, CONFIG_EBU_ADDSEL1
+       sw      t2, EBU_ADDSEL1(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL2)
+       li      t2, CONFIG_EBU_ADDSEL2
+       sw      t2, EBU_ADDSEL2(t1)
+#endif
+#if defined(CONFIG_EBU_ADDSEL3)
+       li      t2, CONFIG_EBU_ADDSEL3
+       sw      t2, EBU_ADDSEL3(t1)
+#endif
+
+#if defined(CONFIG_EBU_BUSCON0)
+       li      t2, CONFIG_EBU_BUSCON0
+       sw      t2, EBU_BUSCON0(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON1)
+       li      t2, CONFIG_EBU_BUSCON1
+       sw      t2, EBU_BUSCON1(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON2)
+       li      t2, CONFIG_EBU_BUSCON2
+       sw      t2, EBU_BUSCON2(t1)
+#endif
+#if defined(CONFIG_EBU_BUSCON3)
+       li      t2, CONFIG_EBU_BUSCON3
+       sw      t2, EBU_BUSCON3(t1)
+#endif
+
+#endif
+
+       j       ra
+       nop
+
+       .end    ebu_init
+
+
+/*
+ * void cgu_init(long)
+ *
+ * a0 has the clock value
+ */
+       .globl  cgu_init
+       .ent    cgu_init
+cgu_init:
+       li  t2, CGU_SYS
+       lw  t2,0(t2)
+       beq t2,a0,freq_up2date
+       nop
+
+       li  t2, RCU_STS
+       lw  t2, 0(t2)
+       and t2,0x00020000
+       beq t2,0x00020000,boot_36MHZ
+       nop
+//05252006
+       li  t1, PLL0_CFG
+       li  t2, pll0_35MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, PLL1_CFG
+       li  t2, pll1_35MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, PLL2_CFG
+       li  t2, pll2_35MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, CGU_SYS
+       sw      a0,0(t1)
+       li  t1, RCU_RST_REQ
+       li  t2, 0x40000008
+       sw      t2,0(t1)
+       b   wait_reset
+       nop
+boot_36MHZ:
+       li  t1, PLL0_CFG
+       li  t2, pll0_36MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, PLL1_CFG
+       li  t2, pll1_36MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, PLL2_CFG
+       li  t2, pll2_36MHz_CONFIG
+       sw      t2,0(t1)
+       li  t1, CGU_SYS
+       sw      a0,0(t1)
+       li  t1, RCU_RST_REQ
+       li  t2, 0x40000008
+       sw      t2,0(t1)
+//05252006
+
+wait_reset:
+       b   wait_reset
+       nop
+freq_up2date:
+       j ra
+       nop
+
+       .end    cgu_init
+
+#ifndef CONFIG_USE_DDR_RAM
+/*
+ * void sdram_init(long)
+ *
+ * a0 has the clock value
+ */
+       .globl  sdram_init
+       .ent    sdram_init
+sdram_init:
+
+       /* SDRAM Initialization
+        */
+       li      t1, MC_MODUL_BASE
+
+       /* Clear Error log registers */
+       sw      zero, MC_ERRCAUSE(t1)
+       sw      zero, MC_ERRADDR(t1)
+
+       /* Enable SDRAM module in memory controller */
+       li      t3, MC_SDRAM_ENABLE
+       lw      t2, MC_CON(t1)
+       or      t3, t2, t3
+       sw      t3, MC_CON(t1)
+
+       li      t1, MC_SDR_MODUL_BASE
+
+       /* disable the controller */
+       li      t2, 0
+       sw      t2, MC_CTRLENA(t1)
+
+       li      t2, 0x822
+       sw      t2, MC_IOGP(t1)
+
+       li      t2, 0x2
+       sw      t2, MC_CFGDW(t1)
+
+       /* Set CAS Latency */
+       li      t2, 0x00000020
+       sw      t2, MC_MRSCODE(t1)
+
+       /* Set CS0 to SDRAM parameters */
+       li      t2, 0x000014d8
+       sw      t2, MC_CFGPB0(t1)
+
+       /* Set SDRAM latency parameters */
+       li      t2, 0x00036325;   /* BC PC100 */
+       sw      t2, MC_LATENCY(t1)
+
+       /* Set SDRAM refresh rate */
+       li      t2, 0x00000C30
+       sw      t2, MC_TREFRESH(t1)
+
+       /* Clear Power-down registers */
+       sw      zero, MC_SELFRFSH(t1)
+
+       /* Finally enable the controller */
+       li      t2, 1
+       sw      t2, MC_CTRLENA(t1)
+
+       j       ra
+       nop
+
+       .end    sdram_init
+
+#endif /* !CONFIG_USE_DDR_RAM */
+
+#ifdef CONFIG_USE_DDR_RAM
+/*
+ * void ddrram_init(long)
+ *
+ * a0 has the clock value
+ */
+       .globl  ddrram_init
+       .ent    ddrram_init
+ddrram_init:
+
+       /* DDR-DRAM Initialization
+        */
+       li      t1, MC_MODUL_BASE
+
+       /* Clear Error log registers */
+       sw      zero, MC_ERRCAUSE(t1)
+       sw      zero, MC_ERRADDR(t1)
+
+       /* Enable DDR module in memory controller */
+       li      t3, MC_DDRRAM_ENABLE
+       lw      t2, MC_CON(t1)
+       or      t3, t2, t3
+       sw      t3, MC_CON(t1)
+
+       li      t1, MC_DDR_MODUL_BASE
+
+       /* Write configuration to DDR controller registers */
+       li      t2, MC_DC0_VALUE
+       sw      t2, MC_DC00(t1)
+
+       li      t2, MC_DC1_VALUE
+       sw      t2, MC_DC01(t1)
+
+       li      t2, MC_DC2_VALUE
+       sw      t2, MC_DC02(t1)
+
+       li      t2, MC_DC3_VALUE
+       sw      t2, MC_DC03(t1)
+
+       li      t2, MC_DC4_VALUE
+       sw      t2, MC_DC04(t1)
+
+       li      t2, MC_DC5_VALUE
+       sw      t2, MC_DC05(t1)
+
+       li      t2, MC_DC6_VALUE
+       sw      t2, MC_DC06(t1)
+
+       li      t2, MC_DC7_VALUE
+       sw      t2, MC_DC07(t1)
+
+       li      t2, MC_DC8_VALUE
+       sw      t2, MC_DC08(t1)
+
+       li      t2, MC_DC9_VALUE
+       sw      t2, MC_DC09(t1)
+
+       li      t2, MC_DC10_VALUE
+       sw      t2, MC_DC10(t1)
+
+       li      t2, MC_DC11_VALUE
+       sw      t2, MC_DC11(t1)
+
+       li      t2, MC_DC12_VALUE
+       sw      t2, MC_DC12(t1)
+
+       li      t2, MC_DC13_VALUE
+       sw      t2, MC_DC13(t1)
+
+       li      t2, MC_DC14_VALUE
+       sw      t2, MC_DC14(t1)
+
+       li      t2, MC_DC15_VALUE
+       sw      t2, MC_DC15(t1)
+
+       li      t2, MC_DC16_VALUE
+       sw      t2, MC_DC16(t1)
+
+       li      t2, MC_DC17_VALUE
+       sw      t2, MC_DC17(t1)
+
+       li      t2, MC_DC18_VALUE
+       sw      t2, MC_DC18(t1)
+
+       li      t2, MC_DC19_VALUE
+       sw      t2, MC_DC19(t1)
+
+       li      t2, MC_DC20_VALUE
+       sw      t2, MC_DC20(t1)
+
+       li      t2, MC_DC21_VALUE
+       sw      t2, MC_DC21(t1)
+
+       li      t2, MC_DC22_VALUE
+       sw      t2, MC_DC22(t1)
+
+       li      t2, MC_DC23_VALUE
+       sw      t2, MC_DC23(t1)
+
+       li      t2, MC_DC24_VALUE
+       sw      t2, MC_DC24(t1)
+
+       li      t2, MC_DC25_VALUE
+       sw      t2, MC_DC25(t1)
+
+       li      t2, MC_DC26_VALUE
+       sw      t2, MC_DC26(t1)
+
+       li      t2, MC_DC27_VALUE
+       sw      t2, MC_DC27(t1)
+
+       li      t2, MC_DC28_VALUE
+       sw      t2, MC_DC28(t1)
+
+       li      t2, MC_DC29_VALUE
+       sw      t2, MC_DC29(t1)
+
+       li      t2, MC_DC30_VALUE
+       sw      t2, MC_DC30(t1)
+
+       li      t2, MC_DC31_VALUE
+       sw      t2, MC_DC31(t1)
+
+       li      t2, MC_DC32_VALUE
+       sw      t2, MC_DC32(t1)
+
+       li      t2, MC_DC33_VALUE
+       sw      t2, MC_DC33(t1)
+
+       li      t2, MC_DC34_VALUE
+       sw      t2, MC_DC34(t1)
+
+       li      t2, MC_DC35_VALUE
+       sw      t2, MC_DC35(t1)
+
+       li      t2, MC_DC36_VALUE
+       sw      t2, MC_DC36(t1)
+
+       li      t2, MC_DC37_VALUE
+       sw      t2, MC_DC37(t1)
+
+       li      t2, MC_DC38_VALUE
+       sw      t2, MC_DC38(t1)
+
+       li      t2, MC_DC39_VALUE
+       sw      t2, MC_DC39(t1)
+
+       li      t2, MC_DC40_VALUE
+       sw      t2, MC_DC40(t1)
+
+       li      t2, MC_DC41_VALUE
+       sw      t2, MC_DC41(t1)
+
+       li      t2, MC_DC42_VALUE
+       sw      t2, MC_DC42(t1)
+
+       li      t2, MC_DC43_VALUE
+       sw      t2, MC_DC43(t1)
+
+       li      t2, MC_DC44_VALUE
+       sw      t2, MC_DC44(t1)
+
+       li      t2, MC_DC45_VALUE
+       sw      t2, MC_DC45(t1)
+
+       li      t2, MC_DC46_VALUE
+       sw      t2, MC_DC46(t1)
+
+       li      t2, 0x00000100
+       sw      t2, MC_DC03(t1)
+
+       j       ra
+       nop
+
+       .end    ddrram_init
+#endif /* CONFIG_USE_DDR_RAM */
+
+       .globl  lowlevel_init
+       .ent    lowlevel_init
+lowlevel_init:
+       /* EBU, CGU and SDRAM/DDR-RAM Initialization.
+        */
+       move    t0, ra
+       /* We rely on the fact that non of the following ..._init() functions
+        * modify t0
+        */
+#if defined(CONFIG_SYS_EBU_BOOT)
+#if defined(DDR166)
+       /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
+       li  a0,0xe8
+#elif defined(DDR133)
+       /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */
+       li  a0,0xe9
+#else /* defined(DDR111) */
+       /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */
+       li  a0,0xea
+#endif
+       bal     cgu_init
+       nop
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+       bal     ebu_init
+       nop
+
+//06063001-joelin disable the PCI CFRAME mask-start
+#ifdef DISABLE_CFRAME
+       li  t1, PCI_CR_PCI      //mw bf103034 80000000
+       li  t2, 0x80000000
+       sw      t2,0(t1)
+
+       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
+       li  t2, 0x103
+       sw  t2,0(t1)
+
+       li  t1, CS_CFM                  //mw b700006c 0
+       li  t2, 0x00
+       sw  t2, 0(t1)
+
+       li  t1, PCI_CR_PCI_MOD_REG      //mw be105430 103
+       li  t2, 0x1000103
+       sw  t2, 0(t1)
+#endif
+//06063001-joelin disable the PCI CFRAME mask-end
+
+#ifdef CONFIG_SYS_EBU_BOOT
+#ifndef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_USE_DDR_RAM
+       bal     ddrram_init
+       nop
+#else
+       bal     sdram_init
+       nop
+#endif
+#endif /* CONFIG_SYS_RAMBOOT */
+#endif /* CONFIG_SYS_EBU_BOOT */
+
+       move    ra, t0
+       j       ra
+       nop
+
+       .end    lowlevel_init
diff --git a/package/uboot-lantiq/files/board/arcadyan/pmuenable.S b/package/uboot-lantiq/files/board/arcadyan/pmuenable.S
new file mode 100644 (file)
index 0000000..e0d7971
--- /dev/null
@@ -0,0 +1,48 @@
+/*
+ *  Power Management unit initialization code for AMAZON development board.
+ *
+ *  Copyright (c) 2003 Ou Ke, Infineon.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+
+#define PMU_PWDCR              0xBF10201C
+#define PMU_SR                 0xBF102020
+
+       .globl  pmuenable
+
+pmuenable:
+       li      t0, PMU_PWDCR
+       li      t1, 0x2         /* enable everything */
+       sw      t1, 0(t0)
+#if 0
+1:
+       li      t0, PMU_SR
+       lw      t2, 0(t0)
+       bne     t1, t2, 1b
+       nop
+#endif
+       j       ra
+       nop
+
+
diff --git a/package/uboot-lantiq/files/board/arcadyan/u-boot.lds b/package/uboot-lantiq/files/board/arcadyan/u-boot.lds
new file mode 100644 (file)
index 0000000..9a6cd1b
--- /dev/null
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+       . = 0x00000000;
+
+       . = ALIGN(4);
+       .text       :
+       {
+         *(.text)
+       }
+
+       . = ALIGN(4);
+       .rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+       . = ALIGN(4);
+       .data  : { *(.data) }
+
+       . = .;
+       _gp = ALIGN(16) + 0x7ff0;
+
+       .got : {
+         __got_start = .;
+         *(.got)
+         __got_end = .;
+       }
+
+       .sdata  : { *(.sdata) }
+
+       .u_boot_cmd : {
+         __u_boot_cmd_start = .;
+         *(.u_boot_cmd)
+         __u_boot_cmd_end = .;
+       }
+
+       uboot_end_data = .;
+       num_got_entries = (__got_end - __got_start) >> 2;
+
+       . = ALIGN(4);
+       .sbss (NOLOAD)  : { *(.sbss) }
+       .bss (NOLOAD)  : { *(.bss) . = ALIGN(4); }
+       uboot_end = .;
+}
diff --git a/package/uboot-lantiq/files/include/configs/arcadyan-common.h b/package/uboot-lantiq/files/include/configs/arcadyan-common.h
new file mode 100644 (file)
index 0000000..3bb6431
--- /dev/null
@@ -0,0 +1,138 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the Danube reference board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* #define DEBUG */
+
+#define CONFIG_MIPS32          1       /* MIPS32 CPU compatible                */
+#define CONFIG_MIPS24KEC       1       /* MIPS 24KEc CPU core                  */
+#define CONFIG_DANUBE          1       /* in a Danube/Twinpass Chip            */
+
+#define CONFIG_SYS_MIPS_MULTI_CPU      1       /* This is a multi cpu system */
+
+#define CONFIG_USE_DDR_RAM
+
+#define CONFIG_FLASH_CFI_DRIVER        1
+
+#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
+
+#ifdef CONFIG_SYS_RAMBOOT
+       //#warning CONFIG_SYS_RAMBOOT
+       #define CONFIG_SKIP_LOWLEVEL_INIT
+#else /* CONFIG_SYS_RAMBOOT */
+       #define CONFIG_SYS_EBU_BOOT
+       #define INFINEON_EBU_BOOTCFG    0x688C688C      /* CMULT = 8 for 150 MHz */
+#endif /* CONFIG_SYS_RAMBOOT */
+
+#if 1
+#ifndef        CPU_CLOCK_RATE
+#define CPU_CLOCK_RATE (ifx_get_cpuclk())
+#endif
+#endif
+
+#undef CONFIG_SYS_HUSH_PARSER          /* Use the HUSH parser          */
+
+/*
+ * Include common defines/options for all Infineon boards
+ */
+#include "ifx-common.h"
+
+
+#undef CONFIG_EXTRA_ENV_SETTINGS                                       
+#define CONFIG_EXTRA_ENV_SETTINGS                                       \
+        "ram_addr=0x80500000\0"                                         \
+        "kernel_addr=0xb0050000\0"                                      \
+        "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"         \
+        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+                "nfsroot=${serverip}:${rootpath} \0"                    \
+        "addip=setenv bootargs ${bootargs} "                            \
+                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+                ":${hostname}:${netdev}:off\0"                          \
+        "addmisc=setenv bootargs ${bootargs} init=/etc/preinit "        \
+                "console=ttyS1,115200 ethaddr=${ethaddr} "              \
+                "${mtdparts}\0"                                         \
+        "flash_flash=run flashargs addip addmisc;"                      \
+                "bootm ${kernel_addr}\0"                                \
+        "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"    \
+        "net_flash=run load_kernel flashargs addip addmisc;"            \
+                "bootm ${ram_addr}\0"                                   \
+        "net_nfs=run load_kernel nfsargs addip addmisc;"                \
+                "bootm ${ram_addr}\0"                                   \
+        "load_kernel=tftp ${ram_addr} "                                 \
+                "${tftppath}openwrt-ifxmips-uImage\0"                   \
+        "update_uboot=tftp 0x80500000 ${tftppath}u-boot-" CONFIG_ARCADYAN ".bin;era 0xb0000000 +${filesize};" \
+                "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
+        "update_openwrt=tftp ${ram_addr} "                              \
+                "${tftppath}openwrt-lantiq-" CONFIG_ARCADYAN "-squashfs.image;"            \
+                "era ${kernel_addr} +${filesize};"                      \
+                "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
+
+/*
+ * Cache Configuration (cpu/chip specific, Danube)
+ */
+#define CONFIG_SYS_DCACHE_SIZE         16384
+#define CONFIG_SYS_ICACHE_SIZE         16384
+#define CONFIG_SYS_CACHELINE_SIZE      32
+#define CONFIG_SYS_MIPS_CACHE_OPER_MODE        CONF_CM_CACHABLE_NO_WA
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_IFX_ETOP
+//#define CLK_OUT2_25MHZ
+
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+
+#define CONFIG_IFX_ASC
+
+#ifdef CONFIG_USE_ASC0
+#define CONFIG_SYS_IFX_ASC_BASE                0x1E100400
+#else
+#define CONFIG_SYS_IFX_ASC_BASE                0x1E100C00
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+/* Configuration of EBU: */
+/* starting address from 0xb0000000 */
+/* make the flash available from RAM boot */
+#      define CONFIG_EBU_ADDSEL0               0x10000031
+#      define CONFIG_EBU_BUSCON0               0x0001D7FF
+#      define CONFIG_EBU_ADDSEL1               0x14000001
+#      define CONFIG_EBU_BUSCON1               0x4041D7FD
+#endif
+
+#define CONFIG_CMD_HTTPD               /* enable upgrade via HTTPD */
+
+#define CONFIG_IPADDR          192.168.1.1
+#define CONFIG_SERVERIP                192.168.1.101
+#define CONFIG_GATEWAYIP       192.168.1.254
+#define CONFIG_NETMASK         255.255.255.0
+#define CONFIG_ROOTPATH                "/export"
+
+#endif /* __CONFIG_H */
index c4a9842..4c40f05 100644 (file)
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
+#ifndef __CONFIG_H_4518
+#define __CONFIG_H_4518
 
-/*
- * This file contains the configuration parameters for the Danube reference board.
- */
+#define CONFIG_ARV4518         1
+#define CONFIG_ARCADYAN                "ARV4518PW"
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-
-#define CONFIG_MIPS32          1       /* MIPS32 CPU compatible                */
-#define CONFIG_MIPS24KEC       1       /* MIPS 24KEc CPU core                  */
-#define CONFIG_DANUBE          1       /* in a Danube/Twinpass Chip            */
-#define CONFIG_ARV4518         1       /* on the arv4518 Board                 */
-
-#define CONFIG_SYS_MIPS_MULTI_CPU      1       /* This is a multi cpu system */
-
-#define CONFIG_USE_DDR_RAM
 #define CONFIG_SYS_MAX_RAM     64*1024*1024
+#define        CONFIG_SYS_PROMPT       "ARV4518 => "
+//#define CONFIG_RMII
+#define CONFIG_AR8216_SWITCH   1
 
-#define CONFIG_FLASH_CFI_DRIVER        1
-
-#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
-
-#ifdef CONFIG_SYS_RAMBOOT
-       //#warning CONFIG_SYS_RAMBOOT
-       #define CONFIG_SKIP_LOWLEVEL_INIT
-#else /* CONFIG_SYS_RAMBOOT */
-       #define CONFIG_SYS_EBU_BOOT
-       #define INFINEON_EBU_BOOTCFG    0x688C688C      /* CMULT = 8 for 150 MHz */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#if 1
-#ifndef        CPU_CLOCK_RATE
-#define CPU_CLOCK_RATE (ifx_get_cpuclk())
-#endif
-#endif
-
-#define        CONFIG_SYS_PROMPT       "ARV4518 => "   /* Monitor Command Prompt */
-
-#undef CONFIG_SYS_HUSH_PARSER          /* Use the HUSH parser          */
-
-/*
- * Include common defines/options for all Infineon boards
- */
-#include "ifx-common.h"
-
+#include "arcadyan-common.h"
 
-#undef CONFIG_EXTRA_ENV_SETTINGS                                       
-#define CONFIG_EXTRA_ENV_SETTINGS                                       \
-        "ram_addr=0x80500000\0"                                         \
-        "kernel_addr=0xb0050000\0"                                      \
-        "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
-        "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"         \
-        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-                "nfsroot=${serverip}:${rootpath} \0"                    \
-        "addip=setenv bootargs ${bootargs} "                            \
-                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-                ":${hostname}:${netdev}:off\0"                          \
-        "addmisc=setenv bootargs ${bootargs} init=/etc/preinit "        \
-                "console=ttyS1,115200 ethaddr=${ethaddr} "              \
-                "${mtdparts}\0"                                         \
-        "flash_flash=run flashargs addip addmisc;"                      \
-                "bootm ${kernel_addr}\0"                                \
-        "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"    \
-        "net_flash=run load_kernel flashargs addip addmisc;"            \
-                "bootm ${ram_addr}\0"                                   \
-        "net_nfs=run load_kernel nfsargs addip addmisc;"                \
-                "bootm ${ram_addr}\0"                                   \
-        "load_kernel=tftp ${ram_addr} "                                 \
-                "${tftppath}openwrt-ifxmips-uImage\0"                   \
-        "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
-                "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
-        "update_openwrt=tftp ${ram_addr} "                              \
-                "${tftppath}openwrt-ifxmips-squashfs.image;"            \
-                "era ${kernel_addr} +${filesize};"                      \
-                "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
-
-/*
- * Cache Configuration (cpu/chip specific, Danube)
- */
-#define CONFIG_SYS_DCACHE_SIZE         16384
-#define CONFIG_SYS_ICACHE_SIZE         16384
-#define CONFIG_SYS_CACHELINE_SIZE      32
-#define CONFIG_SYS_MIPS_CACHE_OPER_MODE        CONF_CM_CACHABLE_NO_WA
-
-#define CONFIG_NET_MULTI
-#if 0
-#define CONFIG_M4530_ETH
-#define CONFIG_M4530_FPGA
 #endif
-
-#define CONFIG_IFX_ETOP
-//#define CLK_OUT2_25MHZ
-#define CONFIG_EXTRA_SWITCH
-
-//#define CONFIG_RMII                  /*  use interface in RMII mode */
-
-#define CONFIG_MII
-#define CONFIG_CMD_MII
-
-#define CONFIG_IFX_ASC
-
-#ifdef CONFIG_USE_ASC0
-#define CONFIG_SYS_IFX_ASC_BASE                0x1E100400
-#else
-#define CONFIG_SYS_IFX_ASC_BASE                0x1E100C00
-#endif
-
-#ifdef CONFIG_SYS_RAMBOOT
-/* Configuration of EBU: */
-/* starting address from 0xb0000000 */
-/* make the flash available from RAM boot */
-#      define CONFIG_EBU_ADDSEL0               0x10000031
-#      define CONFIG_EBU_BUSCON0               0x0001D7FF
-#      define CONFIG_EBU_ADDSEL1               0x14000001
-#      define CONFIG_EBU_BUSCON1               0x4041D7FD
-#endif
-
-#define CONFIG_CMD_HTTPD               /* enable upgrade via HTTPD */
-
-//#define CONFIG_ETHADDR               00:13:f7:df:1c:80
-//#define CONFIG_ETHADDR               11:22:33:44:55:66
-#define CONFIG_IPADDR          192.168.2.1
-#define CONFIG_SERVERIP                192.168.2.101
-#define CONFIG_GATEWAYIP       192.168.2.254
-#define CONFIG_NETMASK         255.255.255.0
-#define CONFIG_ROOTPATH                "/export"
-
-#endif /* __CONFIG_H */
diff --git a/package/uboot-lantiq/files/include/configs/arv452c.h b/package/uboot-lantiq/files/include/configs/arv452c.h
new file mode 100644 (file)
index 0000000..c4970a2
--- /dev/null
@@ -0,0 +1,14 @@
+#ifndef __CONFIG_H_452C
+#define __CONFIG_H_452C
+
+#define CONFIG_ARV4518         1
+#define CONFIG_ARCADYAN                "ARV452CPW"
+
+#define CONFIG_SYS_MAX_RAM     32*1024*1024
+#define        CONFIG_SYS_PROMPT       "ARV452c => "
+#define CONFIG_RMII            1
+#define CONFIG_RTL8306_SWITCH  1
+
+#include "arcadyan-common.h"
+
+#endif
diff --git a/package/uboot-lantiq/files/include/configs/arv752DPW.h b/package/uboot-lantiq/files/include/configs/arv752DPW.h
new file mode 100644 (file)
index 0000000..a73a87c
--- /dev/null
@@ -0,0 +1,20 @@
+#ifndef __CONFIG_H_752DPW
+#define __CONFIG_H_752DPW
+
+#define CONFIG_ARV752DPW       1
+#define CONFIG_ARCADYAN                "ARV752DPW"
+
+#define CONFIG_SYS_MAX_RAM     64*1024*1024
+#define        CONFIG_SYS_PROMPT       "ARV752DPW => "
+
+//#define CONFIG_RMII
+#define CONFIG_RTL8306_SWITCH  1
+//#define CONFIG_EBU_GPIO              0x2
+#define CONFIG_SWITCH_PORT1
+#define CONFIG_SWITCH_PIN      3
+//#define CONFIG_BUTTON_PORT0
+//#define CONFIG_BUTTON_PIN    12
+
+#include "arcadyan-common.h"
+
+#endif
diff --git a/package/uboot-lantiq/files/include/configs/arv752DPW22.h b/package/uboot-lantiq/files/include/configs/arv752DPW22.h
new file mode 100644 (file)
index 0000000..5a1a5ad
--- /dev/null
@@ -0,0 +1,20 @@
+#ifndef __CONFIG_H_752DPW22
+#define __CONFIG_H_752DPW22
+
+#define CONFIG_ARV752DPW22     1
+#define CONFIG_ARCADYAN                "ARV752DPW22"
+
+#define CONFIG_SYS_MAX_RAM     64*1024*1024
+#define        CONFIG_SYS_PROMPT       "ARV752DPW22 => "
+
+#define CONFIG_AR8216_SWITCH   1
+#define CONFIG_EBU_GPIO                0x2
+#define CONFIG_SWITCH_PORT1
+#define CONFIG_SWITCH_PIN      3
+#define CONFIG_BUTTON_PORT0
+#define CONFIG_BUTTON_PIN      13
+#define CONFIG_BUTTON_LEVEL    0
+
+#include "arcadyan-common.h"
+
+#endif
diff --git a/package/uboot-lantiq/files/include/configs/arv752DWP22.h b/package/uboot-lantiq/files/include/configs/arv752DWP22.h
deleted file mode 100644 (file)
index 386a238..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the Danube reference board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-
-#define CONFIG_MIPS32          1       /* MIPS32 CPU compatible                */
-#define CONFIG_MIPS24KEC       1       /* MIPS 24KEc CPU core                  */
-#define CONFIG_DANUBE          1       /* in a Danube/Twinpass Chip            */
-#define CONFIG_ARV752DWP22     1       /* on the arv752DWP22 Board             */
-
-#define CONFIG_SYS_MIPS_MULTI_CPU      1       /* This is a multi cpu system */
-
-#define CONFIG_USE_DDR_RAM
-#define CONFIG_SYS_MAX_RAM     64*1024*1024
-
-#define CONFIG_FLASH_CFI_DRIVER        1
-
-#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
-
-#ifdef CONFIG_SYS_RAMBOOT
-       //#warning CONFIG_SYS_RAMBOOT
-       #define CONFIG_SKIP_LOWLEVEL_INIT
-#else /* CONFIG_SYS_RAMBOOT */
-       #define CONFIG_SYS_EBU_BOOT
-       #define INFINEON_EBU_BOOTCFG    0x688C688C      /* CMULT = 8 for 150 MHz */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#if 1
-#ifndef        CPU_CLOCK_RATE
-#define CPU_CLOCK_RATE (ifx_get_cpuclk())
-#endif
-#endif
-
-#define        CONFIG_SYS_PROMPT       "ARV752DWP22 => "       /* Monitor Command Prompt */
-
-#undef CONFIG_SYS_HUSH_PARSER          /* Use the HUSH parser          */
-
-/*
- * Include common defines/options for all Infineon boards
- */
-#include "ifx-common.h"
-
-
-#undef CONFIG_EXTRA_ENV_SETTINGS                                       
-#define CONFIG_EXTRA_ENV_SETTINGS                                       \
-        "ram_addr=0x80500000\0"                                         \
-        "kernel_addr=0xb0050000\0"                                      \
-        "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
-        "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0"         \
-        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-                "nfsroot=${serverip}:${rootpath} \0"                    \
-        "addip=setenv bootargs ${bootargs} "                            \
-                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-                ":${hostname}:${netdev}:off\0"                          \
-        "addmisc=setenv bootargs ${bootargs} init=/etc/preinit "        \
-                "console=ttyS1,115200 ethaddr=${ethaddr} "              \
-                "${mtdparts}\0"                                         \
-        "flash_flash=run flashargs addip addmisc;"                      \
-                "bootm ${kernel_addr}\0"                                \
-        "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0"    \
-        "net_flash=run load_kernel flashargs addip addmisc;"            \
-                "bootm ${ram_addr}\0"                                   \
-        "net_nfs=run load_kernel nfsargs addip addmisc;"                \
-                "bootm ${ram_addr}\0"                                   \
-        "load_kernel=tftp ${ram_addr} "                                 \
-                "${tftppath}openwrt-ifxmips-uImage\0"                   \
-        "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
-                "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
-        "update_openwrt=tftp ${ram_addr} "                              \
-                "${tftppath}openwrt-ifxmips-squashfs.image;"            \
-                "era ${kernel_addr} +${filesize};"                      \
-                "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
-
-/*
- * Cache Configuration (cpu/chip specific, Danube)
- */
-#define CONFIG_SYS_DCACHE_SIZE         16384
-#define CONFIG_SYS_ICACHE_SIZE         16384
-#define CONFIG_SYS_CACHELINE_SIZE      32
-#define CONFIG_SYS_MIPS_CACHE_OPER_MODE        CONF_CM_CACHABLE_NO_WA
-
-#define CONFIG_NET_MULTI
-#if 0
-#define CONFIG_M4530_ETH
-#define CONFIG_M4530_FPGA
-#endif
-
-#define CONFIG_IFX_ETOP
-//#define CLK_OUT2_25MHZ
-#define CONFIG_EXTRA_SWITCH
-
-//#define CONFIG_RMII                  /*  use interface in RMII mode */
-
-#define CONFIG_MII
-#define CONFIG_CMD_MII
-
-#define CONFIG_IFX_ASC
-
-#ifdef CONFIG_USE_ASC0
-#define CONFIG_SYS_IFX_ASC_BASE                0x1E100400
-#else
-#define CONFIG_SYS_IFX_ASC_BASE                0x1E100C00
-#endif
-
-#ifdef CONFIG_SYS_RAMBOOT
-/* Configuration of EBU: */
-/* starting address from 0xb0000000 */
-/* make the flash available from RAM boot */
-#      define CONFIG_EBU_ADDSEL0               0x10000031
-#      define CONFIG_EBU_BUSCON0               0x0001D7FF
-#      define CONFIG_EBU_ADDSEL1               0x14000001
-#      define CONFIG_EBU_BUSCON1               0x4041D7FD
-#endif
-
-#define CONFIG_CMD_HTTPD               /* enable upgrade via HTTPD */
-
-//#define CONFIG_ETHADDR               00:13:f7:df:1c:80
-//#define CONFIG_ETHADDR               11:22:33:44:55:66
-#define CONFIG_IPADDR          192.168.2.1
-#define CONFIG_SERVERIP                192.168.2.101
-#define CONFIG_GATEWAYIP       192.168.2.254
-#define CONFIG_NETMASK         255.255.255.0
-#define CONFIG_ROOTPATH                "/export"
-
-#endif /* __CONFIG_H */
index e4e8067..c0a1b6b 100644 (file)
@@ -23,7 +23,7 @@
 #ifndef __IFX_COMMON_H
 #define __IFX_COMMON_H
 
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
+#define CONFIG_BOOTDELAY       2       /* autoboot after 5 seconds     */
 
 #define CONFIG_BAUDRATE                115200
 
index eedd91c..73ae9e3 100644 (file)
  SRCS  := $(COBJS:.o=.c)
 --- a/Makefile
 +++ b/Makefile
-@@ -3414,6 +3414,46 @@
+@@ -3414,6 +3414,37 @@
  ## MIPS32 ifxcpe
  #########################################################################
  
-+arv752DWP22%config    : unconfig
++define arcadyan
++$(1)  : unconfig
 +      @mkdir -p $(obj)include
-+      @mkdir -p $(obj)board/arcadyan/arv752DWP22
-+      @[ -z "$(findstring brnboot,$@)" ] || \
-+              { echo "TEXT_BASE = 0x80002000" >$(obj)board/arcadyan/arv752DWP22/config.tmp ; \
++      @mkdir -p $(obj)board/arcadyan/
++      @[ -z "$$(findstring brnboot,$$@)" ] || \
++              { echo "TEXT_BASE = 0x80002000" >$(obj)board/arcadyan/config.tmp ; \
 +                      echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
 +                      echo "#define CONFIG_SYS_BRNBOOT" >>$(obj)include/config.h ; \
 +                      $(XECHO) "... with brnboot configuration" ; \
 +              }
-+      @[ -z "$(findstring ramboot,$@)" ] || \
-+              { echo "TEXT_BASE = 0xA0400000" >$(obj)board/arcadyan/arv752DWP22/config.tmp ; \
++      @[ -z "$$(findstring ramboot,$$@)" ] || \
++              { echo "TEXT_BASE = 0xA0400000" >$(obj)board/arcadyan/config.tmp ; \
 +                      echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
 +                      $(XECHO) "... with ramboot configuration" ; \
 +              }
-+      @if [ "$(findstring flash,$@)" ] ; then \
++      @if [ "$$(findstring flash,$$@)" ] ; then \
 +              echo "#define CONFIG_USE_DDR_RAM"  >>$(obj)include/config.h ; \
 +              echo "#define CONFIG_USE_DDR_RAM_CFG_DDR_psc166" >>$(obj)include/config.h ; \
 +      fi
-+      @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips arv752DWP22 arcadyan danube
++      @$(MKCONFIG) -a $$(word 1,$$(subst _, ,$$@)) mips mips arcadyan "" danube
++endef
 +
-+arv4518%config        : unconfig
-+      @mkdir -p $(obj)include
-+      @mkdir -p $(obj)board/arcadyan/arv4518
-+      @[ -z "$(findstring brnboot,$@)" ] || \
-+              { echo "TEXT_BASE = 0x80002000" >$(obj)board/arcadyan/arv4518/config.tmp ; \
-+                      echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
-+                      echo "#define CONFIG_SYS_BRNBOOT" >>$(obj)include/config.h ; \
-+                      $(XECHO) "... with brnboot configuration" ; \
-+              }
-+      @[ -z "$(findstring ramboot,$@)" ] || \
-+              { echo "TEXT_BASE = 0xA0400000" >$(obj)board/arcadyan/arv4518/config.tmp ; \
-+                      echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \
-+                      $(XECHO) "... with ramboot configuration" ; \
-+              }
-+      @if [ "$(findstring flash,$@)" ] ; then \
-+              echo "#define CONFIG_USE_DDR_RAM"  >>$(obj)include/config.h ; \
-+              echo "#define CONFIG_USE_DDR_RAM_CFG_DDR_psc166" >>$(obj)include/config.h ; \
-+      fi
-+      @$(MKCONFIG) -a $(word 1,$(subst _, ,$@)) mips mips arv4518 arcadyan danube
++$(eval $(call arcadyan, arv4520PW%config))
++$(eval $(call arcadyan, arv452CPW%config))
++$(eval $(call arcadyan, arv4525PW%config))
++$(eval $(call arcadyan, arv4510PW%config))
++$(eval $(call arcadyan, arv4518PW%config))
++$(eval $(call arcadyan, arv7518PW%config))
++$(eval $(call arcadyan, arv752DPW%config))
++$(eval $(call arcadyan, arv752DPW22%config))
 +
  easy50712%config      : unconfig
        @mkdir -p $(obj)include