ar71xx: add support for the Senao EAP7660D board
authorGabor Juhos <juhosg@openwrt.org>
Fri, 18 Jun 2010 16:22:05 +0000 (16:22 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Fri, 18 Jun 2010 16:22:05 +0000 (16:22 +0000)
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 21837

target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network [new file with mode: 0644]
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/config-2.6.32
target/linux/ar71xx/config-2.6.33
target/linux/ar71xx/config-2.6.34
target/linux/ar71xx/config-2.6.35
target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
target/linux/ar71xx/image/Makefile

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network b/target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network
new file mode 100644 (file)
index 0000000..7c9fb63
--- /dev/null
@@ -0,0 +1,12 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
index ad1cf7d..28fe8ff 100755 (executable)
@@ -25,6 +25,9 @@ ar71xx_board_name() {
        *"DIR-825 rev. B1")
                name="dir-825-b1"
                ;;
+       *EAP7660D)
+               name="eap7660d"
+               ;;
        *"Bullet M")
                name="bullet-m"
                ;;
index af8f36b..38eef95 100644 (file)
@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -187,6 +188,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
index 3933145..c2acbdc 100644 (file)
@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
index 3a719a8..b6e5e99 100644 (file)
@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
index 3a719a8..b6e5e99 100644 (file)
@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
index 29448ac..95c65bc 100644 (file)
@@ -223,6 +223,14 @@ config AR71XX_MACH_UBNT
        select AR71XX_DEV_USB
        default n
 
+config AR71XX_MACH_EAP7660D
+       bool "Senao EAP7660D support"
+       select AR71XX_DEV_M25P80
+       select AR71XX_DEV_PB42_PCI if PCI
+       select AR71XX_DEV_GPIO_BUTTONS
+       select AR71XX_DEV_LEDS_GPIO
+       default n
+
 endmenu
 
 config AR71XX_DEV_M25P80
index 5c9e2c6..fb6953a 100644 (file)
@@ -33,6 +33,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580)    += mach-aw-nr580.o
 obj-$(CONFIG_AR71XX_MACH_DIR_600_A1)   += mach-dir-600-a1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_615_C1)   += mach-dir-615-c1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_825_B1)   += mach-dir-825-b1.o
+obj-$(CONFIG_AR71XX_MACH_EAP7660D)     += mach-eap7660d.o
 obj-$(CONFIG_AR71XX_MACH_MZK_W04NU)    += mach-mzk-w04nu.o
 obj-$(CONFIG_AR71XX_MACH_MZK_W300NH)   += mach-mzk-w300nh.o
 obj-$(CONFIG_AR71XX_MACH_NBG460N)      += mach-nbg460n.o
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c
new file mode 100644 (file)
index 0000000..f7e7256
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ *  Senao EAP7660D board support
+ *
+ *  Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-pb42-pci.h"
+#include "dev-m25p80.h"
+
+#define EAP7660D_BUTTONS_POLL_INTERVAL 20
+#define EAP7660D_GPIO_DS4              7
+#define EAP7660D_GPIO_DS5              2
+#define EAP7660D_GPIO_DS7              0
+#define EAP7660D_GPIO_DS8              4
+#define EAP7660D_GPIO_SW1              3
+#define EAP7660D_GPIO_SW3              8
+#define EAP7660D_PHYMASK               BIT(20)
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+       {
+               .name           = "eap7660d:green:ds8",
+               .gpio           = EAP7660D_GPIO_DS8,
+               .active_low     = 0,
+       },
+       {
+               .name           = "eap7660d:green:ds5",
+               .gpio           = EAP7660D_GPIO_DS5,
+               .active_low     = 0,
+       },
+       {
+               .name           = "eap7660d:green:ds7",
+               .gpio           = EAP7660D_GPIO_DS7,
+               .active_low     = 0,
+       },
+       {
+               .name           = "eap7660d:green:ds4",
+               .gpio           = EAP7660D_GPIO_DS4,
+               .active_low     = 0,
+       }
+};
+
+static struct gpio_button eap7660d_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
+               .gpio           = EAP7660D_GPIO_SW1,
+               .active_low     = 1,
+       },
+       {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .threshold      = 3,
+               .gpio           = EAP7660D_GPIO_SW3,
+               .active_low     = 1,
+       }
+};
+
+static void __init eap7660d_setup(void)
+{
+       ar71xx_add_device_mdio(~EAP7660D_PHYMASK);
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK;
+       ar71xx_add_device_eth(0);
+       ar71xx_add_device_m25p80(NULL);
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+                                       eap7660d_leds_gpio);
+       ar71xx_add_device_gpio_buttons(-1, EAP7660D_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(eap7660d_gpio_buttons),
+                                       eap7660d_gpio_buttons);
+       pb42_pci_init();
+};
+
+MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+            eap7660d_setup);
index 37ed7d8..9bbc69a 100644 (file)
@@ -54,6 +54,7 @@ enum ar71xx_mach_type {
        AR71XX_MACH_WRT160NL,   /* Linksys WRT160NL */
        AR71XX_MACH_WRT400N,    /* Linksys WRT400N */
        AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+       AR71XX_MACH_EAP7660D,   /* Senao EAP7660D */
 };
 
 #endif /* _AR71XX_MACHTYPE_H */
index e27912e..fc93a17 100644 (file)
@@ -452,6 +452,10 @@ define Image/Build/Profile/DIR600A1
        $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
 endef
 
+define Image/Build/Profile/EAP7660D
+       $(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
+endef
+
 define Image/Build/Profile/FR54RTR
        $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
 endef
@@ -572,6 +576,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/DIR600A1,$(1))
        $(call Image/Build/Profile/DIR615C1,$(1))
        $(call Image/Build/Profile/DIR825B1,$(1))
+       $(call Image/Build/Profile/EAP7660D,$(1))
        $(call Image/Build/Profile/FR54RTR,$(1))
        $(call Image/Build/Profile/MZKW04NU,$(1))
        $(call Image/Build/Profile/MZKW300NH,$(1))
@@ -601,6 +606,7 @@ define Image/Build/Profile/Minimal
 endef
 
 define Image/Build/Profile/Madwifi
+       $(call Image/Build/Profile/EAP7660D,$(1))
        $(call Image/Build/Profile/UBNTRS,$(1))
        $(call Image/Build/Profile/UBNTRSPRO,$(1))
        $(call Image/Build/Profile/UBNTLSSR71,$(1))