[au1000] fix PCI, thanks br1, put back 2.6.32.14 support by default
authorFlorian Fainelli <florian@openwrt.org>
Thu, 1 Jul 2010 19:07:27 +0000 (19:07 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Thu, 1 Jul 2010 19:07:27 +0000 (19:07 +0000)
SVN-Revision: 22033

target/linux/au1000/Makefile
target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch [new file with mode: 0644]
target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch [deleted file]

index e9351c7..6f1a979 100644 (file)
@@ -12,7 +12,7 @@ BOARDNAME:=RMI/AMD AU1x00
 FEATURES:=jffs2 usb pci
 SUBTARGETS=au1500 au1550
 
-LINUX_VERSION:=2.6.30.10
+LINUX_VERSION:=2.6.32.14
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += wpad-mini yamonenv
diff --git a/target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch b/target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch
new file mode 100644 (file)
index 0000000..c2d7473
--- /dev/null
@@ -0,0 +1,38 @@
+
+
+diff --git a/arch/mips/alchemy/mtx-1/board_setup.c 
+b/arch/mips/alchemy/mtx-1/board_setup.c
+index 45b61c9..17140ac 100644
+--- a/arch/mips/alchemy/mtx-1/board_setup.c
++++ b/arch/mips/alchemy/mtx-1/board_setup.c
+@@ -56,8 +56,6 @@ void __init board_setup(void)
+       }
+ #endif
+-      alchemy_gpio2_enable();
+-
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+       /* Enable USB power switch */
+       alchemy_gpio_direction_output(204, 0);
+@@ -92,20 +90,12 @@ void __init board_setup(void)
+ int
+ mtx1_pci_idsel(unsigned int devsel, int assert)
+ {
+-#define MTX_IDSEL_ONLY_0_AND_3 0
+-#if MTX_IDSEL_ONLY_0_AND_3
+-      if (devsel != 0 && devsel != 3) {
+-              printk(KERN_ERR "*** not 0 or 3\n");
+-              return 0;
+-      }
+-#endif
+-
+       if (assert && devsel != 0)
+               /* Suppress signal to Cardbus */
+               gpio_set_value(1, 0);   /* set EXT_IO3 OFF */
+       else
+               gpio_set_value(1, 1);   /* set EXT_IO3 ON */
+-      au_sync_udelay(1);
++      udelay(1);
+       return 1;
+ }
diff --git a/target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch b/target/linux/au1000/patches-2.6.32/005-revert_mtx1_board_gpiolib.patch
deleted file mode 100644 (file)
index 2cd7f95..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-commit 1cd692621e6d4b1f707039ea0b4e5ad3143312fb
-Author: Florian Fainelli <ffainelli@freebox.fr>
-Date:   Thu Jul 1 10:02:53 2010 +0200
-
-    Revert "MIPS: Alchemy: MTX-1: Use linux gpio api."
-    
-    This reverts commit b312ab3b5a86c8be5753cdf32ea429ba80651298.
-
-diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
-index cc32c69..8ed1ae1 100644
---- a/arch/mips/alchemy/mtx-1/board_setup.c
-+++ b/arch/mips/alchemy/mtx-1/board_setup.c
-@@ -28,7 +28,6 @@
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-  */
--#include <linux/gpio.h>
- #include <linux/init.h>
- #include <asm/mach-au1x00/au1000.h>
-@@ -56,11 +55,10 @@ void __init board_setup(void)
-       }
- #endif
--      alchemy_gpio2_enable();
--
- #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-       /* Enable USB power switch */
--      alchemy_gpio_direction_output(204, 0);
-+      au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
-+      au_writel(0x100000, GPIO2_OUTPUT);
- #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
- #ifdef CONFIG_PCI
-@@ -76,14 +74,14 @@ void __init board_setup(void)
-       /* Initialize GPIO */
-       au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
--      alchemy_gpio_direction_output(0, 0);    /* Disable M66EN (PCI 66MHz) */
--      alchemy_gpio_direction_output(3, 1);    /* Disable PCI CLKRUN# */
--      alchemy_gpio_direction_output(1, 1);    /* Enable EXT_IO3 */
--      alchemy_gpio_direction_output(5, 0);    /* Disable eth PHY TX_ER */
-+      au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
-+      au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
-+      au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
-+      au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
-       /* Enable LED and set it to green */
--      alchemy_gpio_direction_output(211, 1);  /* green on */
--      alchemy_gpio_direction_output(212, 0);  /* red off */
-+      au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
-+      au_writel(0x18000800, GPIO2_OUTPUT);
-       board_pci_idsel = mtx1_pci_idsel;
-@@ -103,10 +101,10 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
-       if (assert && devsel != 0)
-               /* Suppress signal to Cardbus */
--              gpio_set_value(1, 0);   /* set EXT_IO3 OFF */
-+              au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
-       else
--              gpio_set_value(1, 1);   /* set EXT_IO3 ON */
--
-+              au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
-       au_sync_udelay(1);
-       return 1;
- }
-+