# CONFIG_LZ4_DECOMPRESS is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
-CONFIG_MIPS_APPENDED_DTB=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_L1_CACHE_SHIFT_4=y
# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
--- /dev/null
+From 1da8f1798e307fb8422753984339beb00025f97d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 12 Apr 2015 12:24:58 +0200
+Subject: [PATCH] MIPS: Add support for vmlinux.bin appended dtb
+
+Add support for detecting a vmlinux.bin appended dtb and overriding
+the boot arguments to match the UHI interface.
+
+Due to the PERCPU section being empty for !SMP, but still modifying
+the current address by aligning it to the page size, do not define
+it for !SMP builds to allow __appended_dtb to still point to
+the actual end of the data.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+Cc: linux-mips@linux-mips.org
+Cc: devicetree@vger.kernel.org
+Cc: John Crispin <blogic@openwrt.org>
+Cc: Kevin Cernekee <cernekee@gmail.com>
+Cc: Florian Fainelli <f.fainelli@gmail.com>
+Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
+Cc: Markos Chandras <markos.chandras@imgtec.com>
+Cc: Andrew Bresticker <abrestic@chromium.org>
+Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Cc: Paul Burton <paul.burton@imgtec.com>
+Cc: James Hartley <James.Hartley@imgtec.com>
+Patchwork: https://patchwork.linux-mips.org/patch/9739/
+Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+---
+ arch/mips/Kconfig | 27 +++++++++++++++++++++++++++
+ arch/mips/kernel/head.S | 16 ++++++++++++++++
+ arch/mips/kernel/vmlinux.lds.S | 8 +++++++-
+ 3 files changed, 50 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2702,6 +2702,33 @@ config BOOT_RAW
+
+
+
++choice
++ prompt "Kernel appended dtb support" if OF
++ default MIPS_NO_APPENDED_DTB
++
++ config MIPS_NO_APPENDED_DTB
++ bool "None"
++ help
++ Do not enable appended dtb support.
++
++ config MIPS_RAW_APPENDED_DTB
++ bool "vmlinux.bin"
++ help
++ With this option, the boot code will look for a device tree binary
++ DTB) appended to raw vmlinux.bin (without decompressor).
++ (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
++
++ This is meant as a backward compatibility convenience for those
++ systems with a bootloader that can't be upgraded to accommodate
++ the documented boot protocol using a device tree.
++
++ Beware that there is very little in terms of protection against
++ this option being confused by leftover garbage in memory that might
++ look like a DTB header after a reboot if no actual DTB is appended
++ to vmlinux.bin. Do not leave this option active in a production kernel
++ if you don't intend to always append a DTB.
++endchoice
++
+ endmenu
+
+ config LOCKDEP_SUPPORT
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp) # kernel
+ jr t0
+ 0:
+
++#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
++ PTR_LA t0, __appended_dtb
++
++#ifdef CONFIG_CPU_BIG_ENDIAN
++ li t1, 0xd00dfeed
++#else
++ li t1, 0xedfe0dd0
++#endif
++ lw t2, (t0)
++ bne t1, t2, not_found
++ nop
++
++ move a1, t0
++ PTR_LI a0, -2
++not_found:
++#endif
+ PTR_LA t0, __bss_start # clear .bss
+ LONG_S zero, (t0)
+ PTR_LA t1, __bss_stop - LONGSIZE
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -125,8 +125,14 @@ SECTIONS
+ .exit.data : {
+ EXIT_DATA
+ }
+-
++#ifdef CONFIG_SMP
+ PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
++#endif
++#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
++ __appended_dtb = .;
++ /* leave space for appended DTB */
++ . += 0x100000;
++#endif
+ /*
+ * Align to 64K in attempt to eliminate holes before the
+ * .bss..swapper_pg_dir section at the start of .bss. This
+++ /dev/null
-From 318c1fce4aeef298cbb6153416c499c94ad7cda0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 24 Jun 2014 10:53:15 +0200
-Subject: [PATCH RFC v3] MIPS: add support for vmlinux.bin appended DTB
-
-Add support for populating initial_boot_params through a dtb
-blob appended to raw vmlinux.bin.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-Changes RFC v2 -> v3
-
-* fixed !smp kernels (TODO: move it to its own patch
-
-Changes RFC v1 -> v2
-
-* changed all occurences of vmlinux to vmlinux.bin
-* clarified this applies to the raw vmlinux.bin without decompressor
-* s/initial_device_params/initial_boot_params/
-
-Initial comments by me still valid:
-
-Mostly adapted from how ARM is doing it.
-
-Sent as an RFC PATCH because I am not sure if this is the right way to
-it, and whether storing the pointer in initial_boot_params is a good
-idea, or a new variable should be introduced.
-
-The reasoning for initial_boot_params is that there is no common
-MIPS interface yet, so the next best thing was using that. This also
-has the advantage of keeping the original fw_args intact.
-
-This patch works for me on bcm63xx, where the bootloader expects
-an lzma compressed kernel, so I didn't want to double compress using
-the in-kernel compressed kernel support.
-
-Completely untested on anything except MIPS32 / big endian.
-
- arch/mips/Kconfig | 18 ++++++++++++++++++
- arch/mips/kernel/head.S | 19 +++++++++++++++++++
- arch/mips/kernel/vmlinux.lds.S | 7 +++++++
- 3 files changed, 43 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2831,6 +2831,24 @@ config RAPIDIO
-
- source "drivers/rapidio/Kconfig"
-
-+config MIPS_APPENDED_DTB
-+ bool "Use appended device tree blob to vmlinux.bin (EXPERIMENTAL)"
-+ depends on OF
-+ help
-+ With this option, the boot code will look for a device tree binary
-+ DTB) appended to raw vmlinux.bin (without decompressor).
-+ (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
-+
-+ This is meant as a backward compatibility convenience for those
-+ systems with a bootloader that can't be upgraded to accommodate
-+ the documented boot protocol using a device tree.
-+
-+ Beware that there is very little in terms of protection against
-+ this option being confused by leftover garbage in memory that might
-+ look like a DTB header after a reboot if no actual DTB is appended
-+ to vmlinux.bin. Do not leave this option active in a production kernel
-+ if you don't intend to always append a DTB.
-+
- endmenu
-
- menu "Executable file formats"
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp) # kernel
- jr t0
- 0:
-
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+ PTR_LA t0, __appended_dtb
-+ PTR_LI t3, 0
-+
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+ PTR_LI t1, 0xd00dfeed
-+#else
-+ PTR_LI t1, 0xedfe0dd0
-+#endif
-+ LONG_L t2, (t0)
-+ bne t1, t2, not_found
-+
-+ PTR_LA t3, __appended_dtb
-+
-+not_found:
-+#endif
- PTR_LA t0, __bss_start # clear .bss
- LONG_S zero, (t0)
- PTR_LA t1, __bss_stop - LONGSIZE
-@@ -113,6 +129,10 @@ NESTED(kernel_entry, 16, sp) # kernel
- LONG_S a2, fw_arg2
- LONG_S a3, fw_arg3
-
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+ LONG_S t3, initial_boot_params
-+#endif
-+
- MTC0 zero, CP0_CONTEXT # clear context register
- PTR_LA $28, init_thread_union
- /* Set the SP after an empty pt_regs. */
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -125,8 +125,14 @@ SECTIONS
- .exit.data : {
- EXIT_DATA
- }
--
-+#ifdef CONFIG_SMP
- PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
-+#endif
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+ __appended_dtb = .;
-+ /* leave space for appended DTB */
-+ . = . + 0x100000;
-+#endif
- /*
- * Align to 64K in attempt to eliminate holes before the
- * .bss..swapper_pg_dir section at the start of .bss. This
-From db896341299cbcb703821228574ba9b79b6a3565 Mon Sep 17 00:00:00 2001
+From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Tue, 24 Jun 2014 10:57:51 +0200
Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
- arch/mips/bcm63xx/boards/Kconfig | 4 ++++
- arch/mips/bcm63xx/boards/board_common.c | 34 +++++++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
+ arch/mips/bcm63xx/boards/Kconfig | 4 ++++
+ arch/mips/bcm63xx/boards/board_common.c | 34 +++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/prom.c | 6 ++++++
+ 3 files changed, 44 insertions(+)
--- a/arch/mips/bcm63xx/boards/Kconfig
+++ b/arch/mips/bcm63xx/boards/Kconfig
if (board.has_uart0)
bcm63xx_uart_register(0);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -8,6 +8,7 @@
+
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
++#include <linux/of_fdt.h>
+ #include <linux/smp.h>
+ #include <asm/bootinfo.h>
+ #include <asm/bmips.h>
+@@ -23,6 +24,11 @@ void __init prom_init(void)
+ {
+ u32 reg, mask;
+
++#if CONFIG_OF
++ if (fw_arg0 == -2)
++ early_init_dt_verify((void *)fw_arg1);
++#endif
++
+ bcm63xx_cpu_init();
+
+ /* stop any running watchdog */
projects / openwrt / svn-archive / archive.git / commitdiff