-/*
- * Custom OID/ioctl definitions for
- * Broadcom 802.11abg Networking Device Driver
- *
- * Definitions subject to change without notice.
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * $Id$
- */
-
-#ifndef _wlioctl_h_
-#define _wlioctl_h_
-
-#include <typedefs.h>
-#include <proto/ethernet.h>
-#include <proto/802.11.h>
-
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#define PACKED
-#endif
-
-#define WLC_ESSID_MAX_SIZE 32
-
-#define WL_NUMRATES 255 /* max # of rates in a rateset */
-
-typedef struct wl_rateset {
- uint32 count; /* # rates in this set */
- uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
-} wl_rateset_t;
-
-#define WL_CHANSPEC_CHAN_MASK 0x0fff
-#define WL_CHANSPEC_BAND_MASK 0xf000
-#define WL_CHANSPEC_BAND_SHIFT 12
-#define WL_CHANSPEC_BAND_A 0x1000
-#define WL_CHANSPEC_BAND_B 0x2000
-
-/*
- * Per-bss information structure.
- */
-
-#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
-#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
-
-typedef struct wl_bss_info106 {
- uint version; /* version field */
- struct ether_addr BSSID;
- uint8 SSID_len;
- uint8 SSID[32];
- uint8 Privacy; /* 0=No WEP, 1=Use WEP */
- int16 RSSI; /* receive signal strength (in dBm) */
- uint16 beacon_period; /* units are Kusec */
- uint16 atim_window; /* units are Kusec */
- uint8 channel; /* Channel no. */
- int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */
- struct {
- uint count; /* # rates in this set */
- uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- uint8 dtim_period; /* DTIM period */
- int8 phy_noise; /* noise right after tx (in dBm) */
- uint16 capability; /* Capability information */
- struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */
- uint16 prb_len; /* probe response frame length (ioctl na) */
- struct {
- uint8 supported; /* wpa supported */
- uint8 multicast; /* multicast cipher */
- uint8 ucount; /* count of unicast ciphers */
- uint8 unicast[4]; /* unicast ciphers */
- uint8 acount; /* count of auth modes */
- uint8 auth[4]; /* Authentication modes */
- } wpa;
-} wl_bss_info106_t;
-
-typedef struct wl_bss_info {
- uint32 version; /* version field */
- uint32 length; /* byte length of data in this record, starting at version and including IEs */
- struct ether_addr BSSID;
- uint16 beacon_period; /* units are Kusec */
- uint16 capability; /* Capability information */
- uint8 SSID_len;
- uint8 SSID[32];
- struct {
- uint count; /* # rates in this set */
- uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- uint8 channel; /* Channel no. */
- uint16 atim_window; /* units are Kusec */
- uint8 dtim_period; /* DTIM period */
- int16 RSSI; /* receive signal strength (in dBm) */
- int8 phy_noise; /* noise (in dBm) */
- uint32 ie_length; /* byte length of Information Elements */
- /* variable length Information Elements */
-} wl_bss_info_t;
-
-typedef struct wlc_ssid {
- uint32 SSID_len;
- uchar SSID[32];
-} wlc_ssid_t;
-
-typedef struct wl_scan_params {
- wlc_ssid_t ssid; /* default is {0, ""} */
- struct ether_addr bssid;/* default is bcast */
- int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
- int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
- int32 nprobes; /* -1 use default, number of probes per channel */
- int32 active_time; /* -1 use default, dwell time per channel for active scanning */
- int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */
- int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */
- int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */
- uint16 channel_list[1]; /* list of chanspecs */
-} wl_scan_params_t;
-/* size of wl_scan_params not including variable length array */
-#define WL_SCAN_PARAMS_FIXED_SIZE 64
-
-typedef struct wl_scan_results {
- uint32 buflen;
- uint32 version;
- uint32 count;
- wl_bss_info_t bss_info[1];
-} wl_scan_results_t;
-/* size of wl_scan_results not including variable length array */
-#define WL_SCAN_RESULTS_FIXED_SIZE 12
-
-/* uint32 list */
-typedef struct wl_uint32_list {
- /* in - # of elements, out - # of entries */
- uint32 count;
- /* variable length uint32 list */
- uint32 element[1];
-} wl_uint32_list_t;
-
-#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
-
-typedef struct wl_channels_in_country {
- uint32 buflen;
- uint32 band;
- char country_abbrev[WLC_CNTRY_BUF_SZ];
- uint32 count;
- uint32 channel[1];
-} wl_channels_in_country_t;
-
-typedef struct wl_country_list {
- uint32 buflen;
- uint32 band_set;
- uint32 band;
- uint32 count;
- char country_abbrev[1];
-} wl_country_list_t;
-
-#define WL_RM_TYPE_BASIC 1
-#define WL_RM_TYPE_CCA 2
-#define WL_RM_TYPE_RPI 3
-
-#define WL_RM_FLAG_PARALLEL (1<<0)
-
-#define WL_RM_FLAG_LATE (1<<1)
-#define WL_RM_FLAG_INCAPABLE (1<<2)
-#define WL_RM_FLAG_REFUSED (1<<3)
-
-typedef struct wl_rm_req_elt {
- int8 type;
- int8 flags;
- uint16 chanspec;
- uint32 token; /* token for this measurement */
- uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
- uint32 tsf_l; /* TSF low 32-bits */
- uint32 dur; /* TUs */
-} wl_rm_req_elt_t;
-
-typedef struct wl_rm_req {
- uint32 token; /* overall measurement set token */
- uint32 count; /* number of measurement reqests */
- wl_rm_req_elt_t req[1]; /* variable length block of requests */
-} wl_rm_req_t;
-#define WL_RM_REQ_FIXED_LEN 8
-
-typedef struct wl_rm_rep_elt {
- int8 type;
- int8 flags;
- uint16 chanspec;
- uint32 token; /* token for this measurement */
- uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
- uint32 tsf_l; /* TSF low 32-bits */
- uint32 dur; /* TUs */
- uint32 len; /* byte length of data block */
- uint8 data[1]; /* variable length data block */
-} wl_rm_rep_elt_t;
-#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
-
-#define WL_RPI_REP_BIN_NUM 8
-typedef struct wl_rm_rpi_rep {
- uint8 rpi[WL_RPI_REP_BIN_NUM];
- int8 rpi_max[WL_RPI_REP_BIN_NUM];
-} wl_rm_rpi_rep_t;
-
-typedef struct wl_rm_rep {
- uint32 token; /* overall measurement set token */
- uint32 len; /* length of measurement report block */
- wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
-} wl_rm_rep_t;
-#define WL_RM_REP_FIXED_LEN 8
-
-
-#define WLC_MAX_KEY_SIZE 32 /* max size of any key */
-#define WLC_MAX_IV_SIZE 16 /* max size of any IV */
-#define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
-#define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */
-#define WLC_MAX_KEYS 54 /* Max # of WEP keys */
-#define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */
-#define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
-#define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */
-#define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
-#define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */
-#define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
-#define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
-#define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */
-#define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
-#define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
-#define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
-#define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
-#define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */
-#define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */
-#define WLC_AES_KEY_SIZE 16 /* size of AES key */
-
-
-typedef enum sup_auth_status {
- WLC_SUP_DISCONNECTED = 0,
- WLC_SUP_CONNECTING,
- WLC_SUP_IDREQUIRED,
- WLC_SUP_AUTHENTICATING,
- WLC_SUP_AUTHENTICATED,
- WLC_SUP_KEYXCHANGE,
- WLC_SUP_KEYED
-} sup_auth_status_t;
-
-/* Enumerate crypto algorithms */
-#define CRYPTO_ALGO_OFF 0
-#define CRYPTO_ALGO_WEP1 1
-#define CRYPTO_ALGO_TKIP 2
-#define CRYPTO_ALGO_WEP128 3
-#define CRYPTO_ALGO_AES_CCM 4
-#define CRYPTO_ALGO_AES_OCB_MSDU 5
-#define CRYPTO_ALGO_AES_OCB_MPDU 6
-#define CRYPTO_ALGO_NALG 7
-
-#define WSEC_GEN_MIC_ERROR 0x0001
-#define WSEC_GEN_REPLAY 0x0002
-
-#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
-#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
-#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
-#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
-
-
-typedef struct wlc_tkip_info {
- uint16 phase1[WLC_TKIP_P1_KEY_SIZE/sizeof(uint16)]; /* tkhash phase1 result */
- uint8 phase2[WLC_TKIP_P2_KEY_SIZE]; /* tkhash phase2 result */
- uint32 micl;
- uint32 micr;
-} tkip_info_t;
-
-typedef struct _wsec_iv {
- uint32 hi; /* upper 32 bits of IV */
- uint16 lo; /* lower 16 bits of IV */
-} wsec_iv_t;
-
-typedef struct wsec_key {
- uint32 index; /* key index */
- uint32 len; /* key length */
- uint8 data[WLC_MAX_KEY_SIZE]; /* key data */
- tkip_info_t tkip_tx; /* tkip transmit state */
- tkip_info_t tkip_rx; /* tkip receive state */
- uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
- uint32 flags; /* misc flags */
- uint32 algo_hw; /* cache for hw register*/
- uint32 aes_mode; /* cache for hw register*/
- int iv_len; /* IV length */
- int iv_initialized; /* has IV been initialized already? */
- int icv_len; /* ICV length */
- wsec_iv_t rxiv; /* Rx IV */
- wsec_iv_t txiv; /* Tx IV */
- struct ether_addr ea; /* per station */
-} wsec_key_t;
-
-
-
-typedef struct wl_wsec_key {
- uint32 index; /* key index */
- uint32 len; /* key length */
- uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
- uint32 pad_1[18];
- uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
- uint32 flags; /* misc flags */
- uint32 pad_2[2];
- int pad_3;
- int iv_initialized; /* has IV been initialized already? */
- int pad_4;
- /* Rx IV */
- struct {
- uint32 hi; /* upper 32 bits of IV */
- uint16 lo; /* lower 16 bits of IV */
- } rxiv;
- uint32 pad_5[2];
- struct ether_addr ea; /* per station */
-} wl_wsec_key_t;
-
-/* For use with wlc_wep_key.flags */
-#define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
-#define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */
-
-#define WSEC_MIN_PSK_LEN 8
-#define WSEC_MAX_PSK_LEN 64
-
-/* Flag for key material needing passhash'ing */
-#define WSEC_PASSPHRASE (1<<0)
-
-/* recepticle for WLC_SET_WSEC_PMK parameter */
-typedef struct {
- ushort key_len; /* octets in key material */
- ushort flags; /* key handling qualification */
- uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
-} wsec_pmk_t;
-
-/* wireless security bitvec */
-#define WEP_ENABLED 1
-#define TKIP_ENABLED 2
-#define AES_ENABLED 4
-#define WSEC_SWFLAG 8
-
-#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
-#define WSEC_HW(wsec) (!WSEC_SW(wsec))
-#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
-#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
-#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
-#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
-
-
-/* wireless authentication bit vector */
-#define WPA_ENABLED 1
-#define PSK_ENABLED 2
-
-#define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED)
-#define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED)
-#define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED))
-
-/* group/mcast cipher */
-#define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
- ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
- WPA_CIPHER_NONE)
-
-
-typedef struct wl_led_info {
- uint32 index; /* led index */
- uint32 behavior;
- bool activehi;
-} wl_led_info_t;
-
-/*
- * definitions for driver messages passed from WL to NAS.
- */
-/* Use this to recognize wpa and 802.1x driver messages. */
-static const uint8 wl_wpa_snap_template[] =
- { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
-
-#define WL_WPA_MSG_IFNAME_MAX 16
-
-/* WPA driver message */
-typedef struct wl_wpa_header {
- struct ether_header eth;
- struct dot11_llc_snap_header snap;
- uint8 version;
- uint8 type;
- /* version 2 additions */
- char ifname[WL_WPA_MSG_IFNAME_MAX];
- /* version specific data */
- /* uint8 data[1]; */
-} wl_wpa_header_t PACKED;
-
-/*
- * definitions for 802.2 messages passed from WL to NAS.
- */
-/* This seems not to be defined outside the kernel on linux. */
-#ifndef ETH_P_802_2
-#define ETH_P_802_2 4
-#endif
-
-#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-
-/* WPA driver message ethertype - private between wlc and nas */
-#define WL_WPA_ETHER_TYPE 0x9999
-
-/* WPA driver message current version */
-#define WL_WPA_MSG_VERSION 2
-
-/* Type field values for the 802.2 driver messages for WPA. */
-#define WLC_ASSOC_MSG 1
-#define WLC_DISASSOC_MSG 2
-#define WLC_PTK_MIC_MSG 3
-#define WLC_GTK_MIC_MSG 4
-
-/* Use this to recognize 802.2 driver messages. */
-static const uint8 wpa_snap_template[] =
- { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
-
-
-/* 802.1x driver message */
-typedef struct wl_eapol_header {
- struct ether_header eth;
- struct dot11_llc_snap_header snap;
- uint8 version;
- uint8 reserved;
- char ifname[WL_WPA_MSG_IFNAME_MAX];
- /* version specific data */
- /* uint8 802_1x_msg[1]; */
-} wl_eapol_header_t PACKED;
-
-#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-
-/* 802.1x driver message ethertype - private between wlc and nas */
-#define WL_EAPOL_ETHER_TYPE 0x999A
-
-/* 802.1x driver message current version */
-#define WL_EAPOL_MSG_VERSION 1
-
-/* srom read/write struct passed through ioctl */
-typedef struct {
- uint byteoff; /* byte offset */
- uint nbytes; /* number of bytes */
- uint16 buf[1];
-} srom_rw_t;
-
-/* R_REG and W_REG struct passed through ioctl */
-typedef struct {
- uint32 byteoff; /* byte offset of the field in d11regs_t */
- uint32 val; /* read/write value of the field */
- uint32 size; /* sizeof the field */
-} rw_reg_t;
-
-/* Structure used by GET/SET_ATTEN ioctls */
-typedef struct {
- uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */
- uint16 bb; /* Baseband attenuation */
- uint16 radio; /* Radio attenuation */
- uint16 txctl1; /* Radio TX_CTL1 value */
-} atten_t;
-
-/* Used to get specific STA parameters */
-typedef struct {
- uint32 val;
- struct ether_addr ea;
-} scb_val_t;
-
-/* callback registration data types */
-
-typedef struct _mac_event_params {
- uint msg;
- struct ether_addr *addr;
- uint result;
- uint status;
- uint auth_type;
-} mac_event_params_t;
-
-typedef struct _mic_error_params {
- struct ether_addr *ea;
- bool group;
- bool flush_txq;
-} mic_error_params_t;
-
-typedef enum _wl_callback {
- WL_MAC_EVENT_CALLBACK = 0,
- WL_LINK_UP_CALLBACK,
- WL_LINK_DOWN_CALLBACK,
- WL_MIC_ERROR_CALLBACK,
- WL_LAST_CALLBACK
-} wl_callback_t;
-
-typedef struct _callback {
- void (*fn)(void *, void *);
- void *context;
-} callback_t;
-
-typedef struct _scan_callback {
- void (*fn)(void *);
- void *context;
-} scan_callback_t;
-
-/* used to register an arbitrary callback via the IOCTL interface */
-typedef struct _set_callback {
- int index;
- callback_t callback;
-} set_callback_t;
-
-
-
-/* Event data type */
-typedef struct {
- uint msg; /* Message (see below) */
- struct ether_addr *addr; /* Station address (if applicable) */
- uint status; /* Status code (see below) */
- uint reason; /* Reason code (if applicable) */
- uint auth_type; /* WLC_E_AUTH */
- bool link; /* WLC_E_LINK */
- bool group; /* WLC_E_MIC_ERROR */
- bool flush_txq; /* WLC_E_MIC_ERROR */
-} wlc_event_t;
-
-typedef struct {
- uint16 ver; /* version of this struct */
- uint16 cap; /* sta's advertized capabilities */
- uint32 flags; /* flags defined below */
- uint32 idle; /* time since data pkt rx'd from sta */
- struct ether_addr ea; /* Station address */
- wl_rateset_t rateset; /* rateset in use */
-} sta_info_t;
-
-#define WL_STA_INFO_LEN 300
-#define WL_STA_VER 1
-
-/* flags fields */
-#define WL_STA_BRCM 0x01
-#define WL_STA_WME 0x02
-#define WL_STA_ABCAP 0x04
-#define WL_STA_AUTHE 0x08
-#define WL_STA_ASSOC 0x10
-#define WL_STA_AUTHO 0x20
-
-/* Event messages */
-#define WLC_E_SET_SSID 1
-#define WLC_E_JOIN 2
-#define WLC_E_START 3
-#define WLC_E_AUTH 4
-#define WLC_E_AUTH_IND 5
-#define WLC_E_DEAUTH 6
-#define WLC_E_DEAUTH_IND 7
-#define WLC_E_ASSOC 8
-#define WLC_E_ASSOC_IND 9
-#define WLC_E_REASSOC 10
-#define WLC_E_REASSOC_IND 11
-#define WLC_E_DISASSOC 12
-#define WLC_E_DISASSOC_IND 13
-#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
-#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
-#define WLC_E_GOT_BEACONS 16
-#define WLC_E_LINK 17 /* Link indication */
-#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
-#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
-#define WLC_E_ROAM 20
-#define WLC_E_LAST 21
-
-/* Event status codes */
-#define WLC_E_STATUS_SUCCESS 0
-#define WLC_E_STATUS_FAIL 1
-#define WLC_E_STATUS_TIMEOUT 2
-#define WLC_E_STATUS_NO_NETWORKS 3
-#define WLC_E_STATUS_ABORT 4
-
-typedef struct wlc_event_cb {
- uint msg; /* Event message or 0 for all */
- void (*fn)(void *, wlc_event_t *); /* Callback function */
- void *context; /* Passed to callback function */
- struct wlc_event_cb *next; /* Next in the chain */
-} wlc_event_cb_t;
-
-/*
- * Country locale determines which channels are available to us.
- */
-typedef enum _wlc_locale {
- WLC_WW = 0, /* Worldwide */
- WLC_THA, /* Thailand */
- WLC_ISR, /* Israel */
- WLC_JDN, /* Jordan */
- WLC_PRC, /* China */
- WLC_JPN, /* Japan */
- WLC_FCC, /* USA */
- WLC_EUR, /* Europe */
- WLC_USL, /* US Low Band only */
- WLC_JPH, /* Japan High Band only */
- WLC_ALL, /* All the channels in this band */
- WLC_11D, /* Represents locale recieved by 11d beacons */
- WLC_LAST_LOCALE,
- WLC_UNDEFINED_LOCALE = 0xf
-} wlc_locale_t;
-
-/* channel encoding */
-typedef struct channel_info {
- int hw_channel;
- int target_channel;
- int scan_channel;
-} channel_info_t;
-
-/* For ioctls that take a list of MAC addresses */
-struct maclist {
- uint count; /* number of MAC addresses */
- struct ether_addr ea[1]; /* variable length array of MAC addresses */
-};
-
-/* get pkt count struct passed through ioctl */
-typedef struct get_pktcnt {
- uint rx_good_pkt;
- uint rx_bad_pkt;
- uint tx_good_pkt;
- uint tx_bad_pkt;
-} get_pktcnt_t;
-
-/* Linux network driver ioctl encoding */
-typedef struct wl_ioctl {
- uint cmd; /* common ioctl definition */
- void *buf; /* pointer to user buffer */
- uint len; /* length of user buffer */
- bool set; /* get or set request (optional) */
- uint used; /* bytes read or written (optional) */
- uint needed; /* bytes needed (optional) */
-} wl_ioctl_t;
-
-/*
- * Structure for passing hardware and software
- * revision info up from the driver.
- */
-typedef struct wlc_rev_info {
- uint vendorid; /* PCI vendor id */
- uint deviceid; /* device id of chip */
- uint radiorev; /* radio revision */
- uint chiprev; /* chip revision */
- uint corerev; /* core revision */
- uint boardid; /* board identifier (usu. PCI sub-device id) */
- uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
- uint boardrev; /* board revision */
- uint driverrev; /* driver version */
- uint ucoderev; /* microcode version */
- uint bus; /* bus type */
- uint chipnum; /* chip number */
-} wlc_rev_info_t;
-
-/* check this magic number */
-#define WLC_IOCTL_MAGIC 0x14e46c77
-
-/* bump this number if you change the ioctl interface */
-#define WLC_IOCTL_VERSION 1
-
-/* maximum length buffer required */
-#define WLC_IOCTL_MAXLEN 8192
-
-/* maximum length buffer required */
-#define WLC_IOCTL_SMLEN 256
-
-/* common ioctl definitions */
-#define WLC_GET_MAGIC 0
-#define WLC_GET_VERSION 1
-#define WLC_UP 2
-#define WLC_DOWN 3
-#define WLC_GET_LOOP 4
-#define WLC_SET_LOOP 5
-#define WLC_DUMP 6
-#define WLC_GET_MSGLEVEL 7
-#define WLC_SET_MSGLEVEL 8
-#define WLC_GET_PROMISC 9
-#define WLC_SET_PROMISC 10
-#define WLC_OBSOLETE 11
-#define WLC_GET_RATE 12
-#define WLC_SET_RATE 13
-#define WLC_GET_INSTANCE 14
-#define WLC_GET_FRAG 15
-#define WLC_SET_FRAG 16
-#define WLC_GET_RTS 17
-#define WLC_SET_RTS 18
-#define WLC_GET_INFRA 19
-#define WLC_SET_INFRA 20
-#define WLC_GET_AUTH 21
-#define WLC_SET_AUTH 22
-#define WLC_GET_BSSID 23
-#define WLC_SET_BSSID 24
-#define WLC_GET_SSID 25
-#define WLC_SET_SSID 26
-#define WLC_RESTART 27
-#define WLC_DUMP_SCB 28
-#define WLC_GET_CHANNEL 29
-#define WLC_SET_CHANNEL 30
-#define WLC_GET_SRL 31
-#define WLC_SET_SRL 32
-#define WLC_GET_LRL 33
-#define WLC_SET_LRL 34
-#define WLC_GET_PLCPHDR 35
-#define WLC_SET_PLCPHDR 36
-#define WLC_GET_RADIO 37
-#define WLC_SET_RADIO 38
-#define WLC_GET_PHYTYPE 39
-#define WLC_DUMP_RATE 40
-#define WLC_SET_RATE_PARAMS 41
-#define WLC_GET_WEP 42
-#define WLC_SET_WEP 43
-#define WLC_GET_KEY 44
-#define WLC_SET_KEY 45
-#define WLC_GET_REGULATORY 46
-#define WLC_SET_REGULATORY 47
-#define WLC_GET_PASSIVE 48 /* added by nbd */
-#define WLC_SET_PASSIVE 49 /* added by nbd */
-#define WLC_SCAN 50
-#define WLC_SCAN_RESULTS 51
-#define WLC_DISASSOC 52
-#define WLC_REASSOC 53
-#define WLC_GET_ROAM_TRIGGER 54
-#define WLC_SET_ROAM_TRIGGER 55
-#define WLC_GET_ROAM_DELTA 56
-#define WLC_SET_ROAM_DELTA 57
-#define WLC_GET_ROAM_SCAN_PERIOD 58
-#define WLC_SET_ROAM_SCAN_PERIOD 59
-#define WLC_EVM 60
-#define WLC_GET_TXANT 61
-#define WLC_SET_TXANT 62
-#define WLC_GET_ANTDIV 63
-#define WLC_SET_ANTDIV 64
-#define WLC_GET_TXPWR 65
-#define WLC_SET_TXPWR 66
-#define WLC_GET_CLOSED 67
-#define WLC_SET_CLOSED 68
-#define WLC_GET_MACLIST 69
-#define WLC_SET_MACLIST 70
-#define WLC_GET_RATESET 71
-#define WLC_SET_RATESET 72
-#define WLC_GET_LOCALE 73
-#define WLC_SET_LOCALE 74
-#define WLC_GET_BCNPRD 75
-#define WLC_SET_BCNPRD 76
-#define WLC_GET_DTIMPRD 77
-#define WLC_SET_DTIMPRD 78
-#define WLC_GET_SROM 79
-#define WLC_SET_SROM 80
-#define WLC_GET_WEP_RESTRICT 81
-#define WLC_SET_WEP_RESTRICT 82
-#define WLC_GET_COUNTRY 83
-#define WLC_SET_COUNTRY 84
-#define WLC_GET_PM 85
-#define WLC_SET_PM 86
-#define WLC_GET_WAKE 87
-#define WLC_SET_WAKE 88
-#define WLC_GET_D11CNTS 89
-#define WLC_GET_FORCELINK 90 /* ndis only */
-#define WLC_SET_FORCELINK 91 /* ndis only */
-#define WLC_FREQ_ACCURACY 92
-#define WLC_CARRIER_SUPPRESS 93
-#define WLC_GET_PHYREG 94
-#define WLC_SET_PHYREG 95
-#define WLC_GET_RADIOREG 96
-#define WLC_SET_RADIOREG 97
-#define WLC_GET_REVINFO 98
-#define WLC_GET_UCANTDIV 99
-#define WLC_SET_UCANTDIV 100
-#define WLC_R_REG 101
-#define WLC_W_REG 102
-#define WLC_DIAG_LOOPBACK 103
-#define WLC_RESET_D11CNTS 104
-#define WLC_GET_MACMODE 105
-#define WLC_SET_MACMODE 106
-#define WLC_GET_MONITOR 107 /* added by nbd */
-#define WLC_SET_MONITOR 108 /* added by nbd */
-#define WLC_GET_GMODE 109
-#define WLC_SET_GMODE 110
-#define WLC_GET_LEGACY_ERP 111
-#define WLC_SET_LEGACY_ERP 112
-#define WLC_GET_RX_ANT 113
-#define WLC_GET_CURR_RATESET 114 /* current rateset */
-#define WLC_GET_SCANSUPPRESS 115
-#define WLC_SET_SCANSUPPRESS 116
-#define WLC_GET_AP 117
-#define WLC_SET_AP 118
-#define WLC_GET_EAP_RESTRICT 119
-#define WLC_SET_EAP_RESTRICT 120
-#define WLC_SCB_AUTHORIZE 121
-#define WLC_SCB_DEAUTHORIZE 122
-#define WLC_GET_WDSLIST 123
-#define WLC_SET_WDSLIST 124
-#define WLC_GET_ATIM 125
-#define WLC_SET_ATIM 126
-#define WLC_GET_RSSI 127
-#define WLC_GET_PHYANTDIV 128
-#define WLC_SET_PHYANTDIV 129
-#define WLC_AP_RX_ONLY 130
-#define WLC_GET_TX_PATH_PWR 131
-#define WLC_SET_TX_PATH_PWR 132
-#define WLC_GET_WSEC 133
-#define WLC_SET_WSEC 134
-#define WLC_GET_PHY_NOISE 135
-#define WLC_GET_BSS_INFO 136
-#define WLC_GET_PKTCNTS 137
-#define WLC_GET_LAZYWDS 138
-#define WLC_SET_LAZYWDS 139
-#define WLC_GET_BANDLIST 140
-#define WLC_GET_BAND 141
-#define WLC_SET_BAND 142
-#define WLC_SCB_DEAUTHENTICATE 143
-#define WLC_GET_SHORTSLOT 144
-#define WLC_GET_SHORTSLOT_OVERRIDE 145
-#define WLC_SET_SHORTSLOT_OVERRIDE 146
-#define WLC_GET_SHORTSLOT_RESTRICT 147
-#define WLC_SET_SHORTSLOT_RESTRICT 148
-#define WLC_GET_GMODE_PROTECTION 149
-#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
-#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
-#define WLC_UPGRADE 152
-#define WLC_GET_MRATE 153
-#define WLC_SET_MRATE 154
-#define WLC_GET_IGNORE_BCNS 155
-#define WLC_SET_IGNORE_BCNS 156
-#define WLC_GET_SCB_TIMEOUT 157
-#define WLC_SET_SCB_TIMEOUT 158
-#define WLC_GET_ASSOCLIST 159
-#define WLC_GET_CLK 160
-#define WLC_SET_CLK 161
-#define WLC_GET_UP 162
-#define WLC_OUT 163
-#define WLC_GET_WPA_AUTH 164
-#define WLC_SET_WPA_AUTH 165
-#define WLC_GET_UCFLAGS 166
-#define WLC_SET_UCFLAGS 167
-#define WLC_GET_PWRIDX 168
-#define WLC_SET_PWRIDX 169
-#define WLC_GET_TSSI 170
-#define WLC_GET_SUP_RATESET_OVERRIDE 171
-#define WLC_SET_SUP_RATESET_OVERRIDE 172
-#define WLC_SET_FAST_TIMER 173
-#define WLC_GET_FAST_TIMER 174
-#define WLC_SET_SLOW_TIMER 175
-#define WLC_GET_SLOW_TIMER 176
-#define WLC_DUMP_PHYREGS 177
-#define WLC_GET_GMODE_PROTECTION_CONTROL 178
-#define WLC_SET_GMODE_PROTECTION_CONTROL 179
-#define WLC_GET_PHYLIST 180
-#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
-#define WLC_DECRYPT_STATUS 182 /* ndis only */
-#define WLC_GET_KEY_SEQ 183
-#define WLC_GET_SCAN_CHANNEL_TIME 184
-#define WLC_SET_SCAN_CHANNEL_TIME 185
-#define WLC_GET_SCAN_UNASSOC_TIME 186
-#define WLC_SET_SCAN_UNASSOC_TIME 187
-#define WLC_GET_SCAN_HOME_TIME 188
-#define WLC_SET_SCAN_HOME_TIME 189
-#define WLC_GET_SCAN_PASSES 190
-#define WLC_SET_SCAN_PASSES 191
-#define WLC_GET_PRB_RESP_TIMEOUT 192
-#define WLC_SET_PRB_RESP_TIMEOUT 193
-#define WLC_GET_ATTEN 194
-#define WLC_SET_ATTEN 195
-#define WLC_GET_SHMEM 196 /* diag */
-#define WLC_SET_SHMEM 197 /* diag */
-#define WLC_GET_GMODE_PROTECTION_CTS 198
-#define WLC_SET_GMODE_PROTECTION_CTS 199
-#define WLC_SET_TKIP_MIC_FLAG 200
-#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
-#define WLC_TKIP_COUNTERMEASURES 202
-#define WLC_GET_PIOMODE 203
-#define WLC_SET_PIOMODE 204
-#define WLC_SET_LED 209
-#define WLC_GET_LED 210
-#define WLC_GET_INTERFERENCE_MODE 211
-#define WLC_SET_INTERFERENCE_MODE 212
-#define WLC_GET_CHANNEL_QA 213
-#define WLC_START_CHANNEL_QA 214
-#define WLC_GET_CHANNEL_SEL 215
-#define WLC_START_CHANNEL_SEL 216
-#define WLC_GET_VALID_CHANNELS 217
-#define WLC_GET_FAKEFRAG 218
-#define WLC_SET_FAKEFRAG 219
-#define WLC_GET_PWROUT_PERCENTAGE 220
-#define WLC_SET_PWROUT_PERCENTAGE 221
-#define WLC_SET_BAD_FRAME_PREEMPT 222
-#define WLC_GET_BAD_FRAME_PREEMPT 223
-#define WLC_SET_LEAP_LIST 224
-#define WLC_GET_LEAP_LIST 225
-#define WLC_GET_CWMIN 226
-#define WLC_SET_CWMIN 227
-#define WLC_GET_CWMAX 228
-#define WLC_SET_CWMAX 229
-#define WLC_GET_WET 230
-#define WLC_SET_WET 231
-#define WLC_GET_KEY_PRIMARY 235
-#define WLC_SET_KEY_PRIMARY 236
-#define WLC_SCAN_WITH_CALLBACK 240
-#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
-#define WLC_SET_CS_SCAN_TIMER 248
-#define WLC_GET_CS_SCAN_TIMER 249
-#define WLC_CURRENT_PWR 256
-#define WLC_GET_CHANNELS_IN_COUNTRY 260
-#define WLC_GET_COUNTRY_LIST 261
-#define WLC_GET_VAR 262 /* get value of named variable */
-#define WLC_SET_VAR 263 /* set named variable to value */
-#define WLC_NVRAM_GET 264
-#define WLC_NVRAM_SET 265
-#define WLC_SET_WSEC_PMK 268
-#define WLC_GET_AUTH_MODE 269
-#define WLC_SET_AUTH_MODE 270
-#define WLC_LAST 273 /* do not change - use get_var/set_var */
-
-/*
- * Minor kludge alert:
- * Duplicate a few definitions that irelay requires from epiioctl.h here
- * so caller doesn't have to include this file and epiioctl.h .
- * If this grows any more, it would be time to move these irelay-specific
- * definitions out of the epiioctl.h and into a separate driver common file.
- */
-#ifndef EPICTRL_COOKIE
-#define EPICTRL_COOKIE 0xABADCEDE
-#endif
-
-/* vx wlc ioctl's offset */
-#define CMN_IOCTL_OFF 0x180
-
-/*
- * custom OID support
- *
- * 0xFF - implementation specific OID
- * 0xE4 - first byte of Broadcom PCI vendor ID
- * 0x14 - second byte of Broadcom PCI vendor ID
- * 0xXX - the custom OID number
- */
-
-/* begin 0x1f values beyond the start of the ET driver range. */
-#define WL_OID_BASE 0xFFE41420
-
-/* NDIS overrides */
-#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
-#define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
-#define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
-#define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
-#define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
-
-#define WL_DECRYPT_STATUS_SUCCESS 1
-#define WL_DECRYPT_STATUS_FAILURE 2
-#define WL_DECRYPT_STATUS_UNKNOWN 3
-
-/* allows user-mode app to poll the status of USB image upgrade */
-#define WLC_UPGRADE_SUCCESS 0
-#define WLC_UPGRADE_PENDING 1
-
-/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-#define WL_RADIO_SW_DISABLE (1<<0)
-#define WL_RADIO_HW_DISABLE (1<<1)
-
-/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
-#define WL_TXPWR_OVERRIDE (1<<31)
-
-
-/* Bus types */
-#define WL_SB_BUS 0 /* Silicon Backplane */
-#define WL_PCI_BUS 1 /* PCI target */
-#define WL_PCMCIA_BUS 2 /* PCMCIA target */
-
-/* band types */
-#define WLC_BAND_AUTO 0 /* auto-select */
-#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
-#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
-
-/* MAC list modes */
-#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
-#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
-#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
-
-
-/* 54g modes (basic bits may still be overridden) */
-#define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */
- /* Preamble: Long */
- /* Shortslot: Off */
-#define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
- /* Extended Rateset: 6, 9, 12, 48 */
- /* Preamble: Long */
- /* Shortslot: Auto */
-#define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
- /* Extended Rateset: 6b, 9, 12b, 48 */
- /* Preamble: Short required */
- /* Shortslot: Auto */
-#define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
- /* Extended Rateset: 6, 9, 12, 48 */
- /* Preamble: Long */
- /* Shortslot: On */
-#define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
- /* Preamble: Short required */
- /* Shortslot: On and required */
-#define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */
- /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
- /* Preamble: Long */
- /* Shortslot: Auto */
-#define GMODE_MAX 6
-
-
-/* values for PLCPHdr_override */
-#define WLC_PLCP_AUTO -1
-#define WLC_PLCP_SHORT 0
-#define WLC_PLCP_LONG 1
-
-/* values for g_protection_override */
-#define WLC_G_PROTECTION_AUTO -1
-#define WLC_G_PROTECTION_OFF 0
-#define WLC_G_PROTECTION_ON 1
-
-/* values for g_protection_control */
-#define WLC_G_PROTECTION_CTL_OFF 0
-#define WLC_G_PROTECTION_CTL_LOCAL 1
-#define WLC_G_PROTECTION_CTL_OVERLAP 2
-
-/* Values for PM */
-#define PM_OFF 0
-#define PM_MAX 1
-#define PM_FAST 2
-
-/* interference mitigation options */
-#define INTERFERE_NONE 0 /* off */
-#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
-#define WLAN_MANUAL 2 /* ACI: no auto detection */
-#define WLAN_AUTO 3 /* ACI: auto - detact */
-
-/* Message levels */
-#define WL_ERROR_VAL 0x0001
-#define WL_TRACE_VAL 0x0002
-#define WL_PRHDRS_VAL 0x0004
-#define WL_PRPKT_VAL 0x0008
-#define WL_INFORM_VAL 0x0010
-#define WL_TMP_VAL 0x0020
-#define WL_OID_VAL 0x0040
-#define WL_RATE_VAL 0x0080
-#define WL_ASSOC_VAL 0x0100
-#define WL_PRUSR_VAL 0x0200
-#define WL_PS_VAL 0x0400
-#define WL_TXPWR_VAL 0x0800
-#define WL_GMODE_VAL 0x1000
-#define WL_DUAL_VAL 0x2000
-#define WL_WSEC_VAL 0x4000
-#define WL_WSEC_DUMP_VAL 0x8000
-#define WL_LOG_VAL 0x10000
-#define WL_NRSSI_VAL 0x20000
-#define WL_LOFT_VAL 0x40000
-#define WL_REGULATORY_VAL 0x80000
-#define WL_ACI_VAL 0x100000
-
-
-/* 802.11h enforcement levels */
-#define SPECT_MNGMT_OFF 0 /* 11h disabled */
-#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
- /* when 11h is enabled */
-#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
-
-
-
-/* max # of leds supported by GPIO (gpio pin# == led index#) */
-#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
-
-/* led per-pin behaviors */
-#define WL_LED_OFF 0 /* always off */
-#define WL_LED_ON 1 /* always on */
-#define WL_LED_ACTIVITY 2 /* activity */
-#define WL_LED_RADIO 3 /* radio enabled */
-#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
-#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
-#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
-#define WL_LED_WI1 7
-#define WL_LED_WI2 8
-#define WL_LED_WI3 9
-#define WL_LED_ASSOC 10 /* associated state indicator */
-#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
-#define WL_LED_NUMBEHAVIOR 12
-
-/* led behavior numeric value format */
-#define WL_LED_BEH_MASK 0x7f /* behavior mask */
-#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
-
-
-/* maximum channels */
-#define WL_NUMCHANNELS 64 /* max # of channels in the band */
-
-/* rate check */
-#define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
- ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
- ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
- ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
-
-/* WDS link local endpoint WPA role */
-#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
-#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
-#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
-
-/* afterburner_override */
-#define ABO_AUTO -1 /* auto - no override */
-#define ABO_OFF 0 /* force afterburner off */
-#define ABO_ON 1 /* force afterburner on */
-
-#define GMODE_AFTERBURNER 6
-
-#undef PACKED
-
-#endif /* _wlioctl_h_ */
projects / openwrt / svn-archive / archive.git / commitdiff