[brcm63xx] more fixes for bcm6338, no need not to prevent reads from MPI registers...

SVN-Revision: 16589

diff --git a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
index c41951b..e27264d 100644 (file)
--- a/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/target/linux/brcm63xx/files/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -45,11 +45,11 @@ static struct board_info board;
 static struct board_info __initdata board_96338gw = {
        .name                           = "96338GW",
        .expected_cpu_id                = 0x6338,
 static struct board_info __initdata board_96338gw = {
        .name                           = "96338GW",
        .expected_cpu_id                = 0x6338,

-
+       

        .has_enet0                      = 1,
        .enet0 = {
        .has_enet0                      = 1,
        .enet0 = {

-               .has_phy                = 1,
-               .use_internal_phy       = 1,
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,

        },
 
        .has_ohci0                      = 1,
        },
 
        .has_ohci0                      = 1,


@@ -58,8 +58,12 @@ static struct board_info __initdata board_96338gw = {
 static struct board_info __initdata board_96338w = {
        .name                           = "96338W",
        .expected_cpu_id                = 0x6338,
 static struct board_info __initdata board_96338w = {
        .name                           = "96338W",
        .expected_cpu_id                = 0x6338,

-
+       

        .has_enet0                      = 1,
        .has_enet0                      = 1,

+       .enet0 = {
+               .force_speed_100        = 1,
+               .force_duplex_full      = 1,
+       }

 };
 #endif
 
 };
 #endif
 


@@ -326,7 +330,7 @@ void __init board_prom_init(void)
        /* read base address of boot chip select (0) 
         * 6338/6345 does not have MPI but boots from standard
         * MIPS Flash address */
        /* read base address of boot chip select (0) 
         * 6338/6345 does not have MPI but boots from standard
         * MIPS Flash address */

-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())

                val = 0x1fc00000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
                val = 0x1fc00000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));


@@ -554,7 +558,7 @@ int __init board_register_devices(void)
 #endif
 
        /* read base address of boot chip select (0) */
 #endif
 
        /* read base address of boot chip select (0) */

-       if (BCMCPU_IS_6338() || BCMCPU_IS_6345())
+       if (BCMCPU_IS_6345())

                val = 0x1fc0000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
                val = 0x1fc0000;
        else {
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));

diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
index 6209f47..58ed270 100644 (file)
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
+++ b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h
@@ -123,7 +123,7 @@ enum bcm63xx_regs_set {
 
 #define BCM_6338_DSL_LMEM_BASE         (0xfff00000)
 #define BCM_6338_PERF_BASE             (0xfffe0000)
 
 #define BCM_6338_DSL_LMEM_BASE         (0xfff00000)
 #define BCM_6338_PERF_BASE             (0xfffe0000)

-#define BCM_6338_BB_BASE               (0xdeadbeef)
+#define BCM_6338_BB_BASE               (0xfffe0100)

 #define BCM_6338_TIMER_BASE            (0xfffe0200)
 #define BCM_6338_WDT_BASE              (0xfffe021c)
 #define BCM_6338_UART0_BASE            (0xfffe0300)
 #define BCM_6338_TIMER_BASE            (0xfffe0200)
 #define BCM_6338_WDT_BASE              (0xfffe021c)
 #define BCM_6338_UART0_BASE            (0xfffe0300)


@@ -132,9 +132,9 @@ enum bcm63xx_regs_set {
 #define BCM_6338_UDC0_BASE             (0xdeadbeef)
 #define BCM_6338_USBDMA_BASE           (0xfffe2400)
 #define BCM_6338_OHCI0_BASE            (0xdeadbeef)
 #define BCM_6338_UDC0_BASE             (0xdeadbeef)
 #define BCM_6338_USBDMA_BASE           (0xfffe2400)
 #define BCM_6338_OHCI0_BASE            (0xdeadbeef)

-#define BCM_6338_OHCI_PRIV_BASE                (0xdeadbeef)
+#define BCM_6338_OHCI_PRIV_BASE                (0xfffe3000)

 #define BCM_6338_USBH_PRIV_BASE                (0xdeadbeef)
 #define BCM_6338_USBH_PRIV_BASE                (0xdeadbeef)

-#define BCM_6338_MPI_BASE              (0xdeadbeef)
+#define BCM_6338_MPI_BASE              (0xfffe3160)

 #define BCM_6338_PCMCIA_BASE           (0xdeadbeef)
 #define BCM_6338_SDRAM_REGS_BASE       (0xfffe3100)
 #define BCM_6338_DSL_BASE              (0xfffe1000)
 #define BCM_6338_PCMCIA_BASE           (0xdeadbeef)
 #define BCM_6338_SDRAM_REGS_BASE       (0xfffe3100)
 #define BCM_6338_DSL_BASE              (0xfffe1000)


@@ -142,7 +142,7 @@ enum bcm63xx_regs_set {
 #define BCM_6338_UBUS_BASE             (0xdeadbeef)
 #define BCM_6338_ENET0_BASE            (0xfffe2800)
 #define BCM_6338_ENET1_BASE            (0xdeadbeef)
 #define BCM_6338_UBUS_BASE             (0xdeadbeef)
 #define BCM_6338_ENET0_BASE            (0xfffe2800)
 #define BCM_6338_ENET1_BASE            (0xdeadbeef)

-#define BCM_6338_ENETDMA_BASE          (0xfffe3800)
+#define BCM_6338_ENETDMA_BASE          (0xfffe2400)

 #define BCM_6338_EHCI0_BASE            (0xdeadbeef)
 #define BCM_6338_SDRAM_BASE            (0xfffe3100)
 #define BCM_6338_MEMC_BASE             (0xdeadbeef)
 #define BCM_6338_EHCI0_BASE            (0xdeadbeef)
 #define BCM_6338_SDRAM_BASE            (0xfffe3100)
 #define BCM_6338_MEMC_BASE             (0xdeadbeef)

diff --git a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
index 0b150db..7e215a5 100644 (file)
--- a/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
+++ b/target/linux/brcm63xx/files/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h
@@ -15,12 +15,17 @@
 /* Clock Control register */
 #define PERF_CKCTL_REG                 0x4
 
 /* Clock Control register */
 #define PERF_CKCTL_REG                 0x4
 

+#define CKCTL_6338_ADSLPHY_EN          (1 << 0)
+#define CKCTL_6338_MPI_EN              (1 << 1)
+#define CKCTL_6338_DRAM_EN             (1 << 2)

 #define CKCTL_6338_ENET_EN             (1 << 4)
 #define CKCTL_6338_USBS_EN             (1 << 4)
 #define CKCTL_6338_SAR_EN              (1 << 5)
 #define CKCTL_6338_SPI_EN              (1 << 9)
 
 #define CKCTL_6338_ENET_EN             (1 << 4)
 #define CKCTL_6338_USBS_EN             (1 << 4)
 #define CKCTL_6338_SAR_EN              (1 << 5)
 #define CKCTL_6338_SPI_EN              (1 << 9)
 

-#define CKCTL_6338_ALL_SAFE_EN         (CKCTL_6338_ENET_EN |           \
+#define CKCTL_6338_ALL_SAFE_EN         (CKCTL_6338_ADSLPHY_EN |        \
+                                       CKCTL_6338_MPI_EN |             \
+                                       CKCTL_6338_ENET_EN |            \

                                        CKCTL_6338_SAR_EN |             \
                                        CKCTL_6338_SPI_EN)
 
                                        CKCTL_6338_SAR_EN |             \
                                        CKCTL_6338_SPI_EN)