Major cleanup :
authorFlorian Fainelli <florian@openwrt.org>
Sun, 8 Apr 2007 17:20:01 +0000 (17:20 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Sun, 8 Apr 2007 17:20:01 +0000 (17:20 +0000)
- no more Broadcom kerSys* code
- working runtime boot loader detection
- updated flash map driver

SVN-Revision: 6896

58 files changed:
target/linux/brcm63xx-2.6/config/default
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h [deleted file]
target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c
target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c
target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c
target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c
target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c
target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_intr.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/Makefile
target/linux/brcm63xx-2.6/image/lzma-loader/Makefile [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/README [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S [new file with mode: 0644]
target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in [new file with mode: 0644]
target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch

index 1d80fda4b3e5fb0d51fb2b0a3f9766fddc994318..491d4e05792b4448e797cb8437359460ddea4119 100644 (file)
@@ -1,41 +1,12 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_8139TOO is not set
 CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
+# CONFIG_B44 is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_BCM96338 is not set
-# CONFIG_BCM96345 is not set
-CONFIG_BCM96348=y
 CONFIG_BCM963XX=y
-# CONFIG_BCM_ADSL is not set
-CONFIG_BCM_ADSL_IMPL=1
-# CONFIG_BCM_ATMAPI is not set
-CONFIG_BCM_ATMAPI_IMPL=1
-# CONFIG_BCM_ATMTEST is not set
-CONFIG_BCM_ATMTEST_IMPL=1
-CONFIG_BCM_BLAA_IMPL=1
-# CONFIG_BCM_BOARD is not set
-CONFIG_BCM_BOARD_IMPL=1
-# CONFIG_BCM_ENDPOINT is not set
-CONFIG_BCM_ENDPOINT_IMPL=1
-# CONFIG_BCM_ENET is not set
-CONFIG_BCM_ENET_IMPL=1
-# CONFIG_BCM_HPNA is not set
-CONFIG_BCM_HPNA_IMPL=0
-CONFIG_BCM_PCI=y
-CONFIG_BCM_PROCFS=y
-CONFIG_BCM_PROCFS_IMPL=1
-# CONFIG_BCM_SECURITY is not set
-CONFIG_BCM_SECURITY_IMPL=1
-CONFIG_BCM_SERIAL=y
-CONFIG_BCM_SERIAL_IMPL=1
-# CONFIG_BCM_USB is not set
-CONFIG_BCM_USB_IMPL=1
-# CONFIG_BCM_VDSL is not set
-CONFIG_BCM_VDSL_IMPL=1
-# CONFIG_BCM_WLAN is not set
-CONFIG_BCM_WLAN_IMPL=1
 CONFIG_BINFMT_MISC=m
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
@@ -43,9 +14,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BSD_DISKLABEL is not set
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBPA10X is not set
+CONFIG_CFE=y
 CONFIG_CICADA_PHY=m
 # CONFIG_CIFS is not set
 # CONFIG_CLS_U32_MARK is not set
@@ -140,6 +109,7 @@ CONFIG_EQUALIZER=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FIXED_PHY is not set
 CONFIG_FORCED_INLINING=y
+CONFIG_FS_POSIX_ACL=y
 CONFIG_FW_LOADER=m
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_GEN_RTC is not set
@@ -181,8 +151,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_TUNNEL=m
-CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200_DEBUG=y
 # CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_MROUTE=y
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -215,6 +183,7 @@ CONFIG_KEYBOARD_ATKBD=m
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KGDB is not set
 CONFIG_KMOD=y
+# CONFIG_LAN_SAA9730 is not set
 CONFIG_LBD=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LLC2 is not set
@@ -273,20 +242,20 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_CONCAT=y
 # CONFIG_MTD_CSTM_MIPS_IXX is not set
 CONFIG_MTD_DEBUG=y
@@ -303,12 +272,10 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NAND is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 # CONFIG_MTD_OTP is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -319,8 +286,9 @@ CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
@@ -330,7 +298,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NET_ACT_IPT is not set
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_PCI is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 # CONFIG_NET_VENDOR_3COM is not set
@@ -342,7 +309,7 @@ CONFIG_NLS_ASCII=m
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_PHYLIB=m
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
@@ -415,68 +382,11 @@ CONFIG_TIPC=m
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
+# CONFIG_VIA_RHINE is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_WAN_ROUTER=m
 # CONFIG_WATCHDOG is not set
 # CONFIG_XFS_FS is not set
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_TOSHIBA=y
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig
deleted file mode 100644 (file)
index 1418f48..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-# Kernel and Driver configuration for Broadcom Commengine ADSL board
-choice
-       prompt "Broadcom Commengine ADSL board"
-       depends on BCM963XX
-       default BCM96348
-       help
-         Select different Broadcom ADSL board
-
-config BCM96338
-       bool "96338 ADSL board"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-
-config BCM96345
-       bool "96345 ADSL board"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-
-config BCM96348
-       bool "96348 ADSL board"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-
-endchoice
-
-config BCM_BOARD
-       bool "Support for Broadcom Board"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL
-       bool "Support for Serial Port"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET
-       tristate "Support for Ethernet"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB
-       tristate "Support for USB"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN
-       tristate "Support for Wireless"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PCI
-       bool "Support for PCI"
-       depends on BCM96338 || BCM96345 || BCM96348
-       select PCI
-
-config BCM_ATMAPI
-       tristate "Support for ATM"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST
-       tristate "Support for ATM Diagnostic"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL
-       tristate "Support for ADSL"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT
-       tristate "Support for VOICE"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS
-       tristate "Support for PROCFS"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL
-       tristate "Support for VDSL"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY
-       tristate "Support for SECURITY"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA
-       tristate "Support for HPNA"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BOARD_IMPL
-       int "Implementation index for ADSL Board"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SERIAL_IMPL
-       int "Implementation index for Serial"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENET_IMPL
-       int "Implementation index for Ethernet"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_USB_IMPL
-       int "Implementation index for USB"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_WLAN_IMPL
-       int "Implementation index for WIRELESS"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMAPI_IMPL
-       int "Implementation index for ATM"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ATMTEST_IMPL
-       int "Implementation index for ATM Diagnostic"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_BLAA_IMPL
-       int "Implementation index for BLAA"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ADSL_IMPL
-       int "Implementation index for ADSL"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_ENDPOINT_IMPL
-       int "Implementation index for VOICE"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_PROCFS_IMPL
-       int "Implementation index for PROCFS"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_VDSL_IMPL
-       int "Implementation index for VDSL"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_SECURITY_IMPL
-       int "Implementation index for SECURITY"
-       depends on BCM96338 || BCM96345 || BCM96348
-
-config BCM_HPNA_IMPL
-       int "Implementation index for HPNA"
-       depends on BCM96338 || BCM96345 || BCM96348
-
index cf524fa64a30d2bec09c05555fa4777864b965f2..aa3654ae50d9e56bbaf1f67e01602c95e6277443 100644 (file)
@@ -1,23 +1,9 @@
 #
-# Makefile for generic Broadcom MIPS boards
+# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel
 #
 # Copyright (C) 2004 Broadcom Corporation
 #
-obj-y           := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o  board.o  boardparms.o int-handler.o
+obj-y           := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o
 
 SRCBASE         := $(TOPDIR)
 EXTRA_CFLAGS    += -I$(SRCBASE)/include
-#EXTRA_CFLAGS    += -I$(INC_ADSLDRV_PATH) -DDBG
-EXTRA_CFLAGS    += -I$(INC_ADSLDRV_PATH) 
-
-
-ifeq "$(ADSL)" "ANNEX_B"
-EXTRA_CFLAGS += -DADSL_ANNEXB
-endif
-ifeq "$(ADSL)" "SADSL"
-EXTRA_CFLAGS += -DADSL_SADSL
-endif
-ifeq "$(ADSL)" "ANNEX_C"
-EXTRA_CFLAGS += -DADSL_ANNEXC
-endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c
deleted file mode 100644 (file)
index 8de0f91..0000000
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/***************************************************************************
- * File Name  : bcm63xx_led.c
- *
- * Description: 
- *
- *    This file contains bcm963xx board led control API functions. 
- *
- *    To use it, do the following
- *
- *    1). define in the board.c the following led mappping (this is for 6345GW board):
- *        const LED_MAP_PAIR cLedMapping45GW[] =
- *        {   // led name     Initial state       physical pin (ledMask)
- *            {kLedUsb,       kLedStateOff,       GPIO_LED_PIN_7}, 
- *            {kLedAdsl,      kLedStateOff,       GPIO_LED_PIN_8},
- *            {kLedPPP,       kLedStateOff,       GPIO_LED_PIN_9},    // PPP and WanData share PIN_9
- *            {kLedWanData,   kLedStateOff,       GPIO_LED_PIN_9},
- *            {kLedWireless,  kLedStateOff,       GPIO_LED_PIN_10},
- *            {kLedEnd,       kLedStateOff,       0              } // NOTE: kLedEnd has to be at the end.
- *
- *    2). };To initialize led API and initial state of the leds, call the following function with the mapping 
- *        pointer from the above struct
- *
- *        boardLedInit((PLED_MAP_PAIR) &cLedMapping45R);
- *
- *    3). Sample call for kernel mode:
- *
- *        kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce);        // kLedxxx defines in board.h
- *
- *    4). Sample call for user mode
- *
- *        sysLedCtrl(kLedAdsl, kLedStateBlinkOnce);           // kLedxxx defines in board_api.h
- *
- *
- * Created on :  10/28/2002  seanl
- *
- ***************************************************************************/
-
-/* Includes. */
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <asm/uaccess.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-
-#define k100ms              (HZ / 10)     // ~100 ms
-#define kFastBlinkCount     0             // ~100ms
-#define kSlowBlinkCount     5             // ~600ms
-
-#define MAX_VIRT_LEDS       12
-
-// uncomment // for debug led
-//#define DEBUG_LED
-
-// global variables:
-struct timer_list gLedTimer;
-int gTimerOn = FALSE;
-int gLedCount = 0;
-
-typedef struct ledinfo
-{
-    unsigned short ledMask;         // mask for led: ie. giop 10 = 0x0400
-    unsigned short ledActiveLow;    // GPIO bit reset to turn on LED
-    unsigned short ledMaskFail;     // mask for led: ie. giop 10 = 0x0400
-    unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED
-    BOARD_LED_STATE ledState;       // current led state
-    BOARD_LED_STATE savedLedState;  // used in blink once for restore to the orignal ledState
-    int blinkCountDown;             // if == 0, do blink (toggle).  Is assgined value and dec by 1 at each timer.
-} LED_INFO, *PLED_INFO;
-
-static PLED_INFO gLed = NULL;
-static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS];
-static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS];
-
-#if 0 /* BROKEN */
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-static int gLedOffInBridgeMode = 1;
-#elif defined(CONFIG_BCM96345)
-static int gLedOffInBridgeMode = 0;
-#endif
-#endif
-
-void ledTimerExpire(void);
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed );
-
-//**************************************************************************************
-// LED operations
-//**************************************************************************************
-
-// turn led on and set the ledState
-void ledOn(PLED_INFO pLed)
-{
-    if( pLed->ledMask )
-    {
-        GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLow )
-            GPIO->GPIOio  &= ~pLed->ledMask;    // turn on the led
-        else
-            GPIO->GPIOio  |= pLed->ledMask;     // turn on the led
-        pLed->ledState = pLed->savedLedState = kLedStateOn;
-    }
-}
-
-
-// turn led off and set the ledState
-void ledOff(PLED_INFO pLed)
-{
-    if( pLed->ledMask )
-    {
-        GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLow )
-            GPIO->GPIOio  |= pLed->ledMask;     // turn off the led
-        else
-            GPIO->GPIOio  &= ~pLed->ledMask;    // turn off the led
-        pLed->ledState = pLed->savedLedState = kLedStateOff;
-    }
-}
-
-// turn led on and set the ledState
-void ledOnFail(PLED_INFO pLed)
-{
-    if( pLed->ledMaskFail )
-    {
-        GPIO->GPIODir |= pLed->ledMaskFail;     // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLowFail )
-            GPIO->GPIOio  &= ~pLed->ledMaskFail;// turn on the led
-        else
-            GPIO->GPIOio  |= pLed->ledMaskFail; // turn on the led
-        pLed->ledState = pLed->savedLedState = kLedStateFail;
-    }
-}
-
-
-// turn led off and set the ledState
-void ledOffFail(PLED_INFO pLed)
-{
-    if( pLed->ledMaskFail )
-    {
-        GPIO->GPIODir |= pLed->ledMaskFail;     // turn on the direction bit in case was turned off by some one
-        if( pLed->ledActiveLowFail )
-            GPIO->GPIOio  |= pLed->ledMaskFail; // turn off the led
-        else
-            GPIO->GPIOio  &= ~pLed->ledMaskFail;// turn off the led
-        pLed->ledState = pLed->savedLedState = kLedStateOff;
-    }
-}
-
-
-// toggle the led and return the current ledState
-BOARD_LED_STATE ledToggle(PLED_INFO pLed)
-{
-    GPIO->GPIODir |= pLed->ledMask;         // turn on the direction bit in case was turned off by some one
-    if (GPIO->GPIOio & pLed->ledMask)
-    {
-        GPIO->GPIOio &= ~(pLed->ledMask);
-        return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff );
-    }
-    else
-    {
-        GPIO->GPIOio |= pLed->ledMask;
-        return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn );
-    }
-}   
-
-
-// led timer.  Will return if timer is already on
-void ledTimerStart(void)
-{
-    if (gTimerOn)
-        return;
-
-#if defined(DEBUG_LED)
-    printk("led: add_timer\n");
-#endif
-
-    init_timer(&gLedTimer);
-    gLedTimer.function = (void*)ledTimerExpire;
-    gLedTimer.expires = jiffies + k100ms;        // timer expires in ~100ms
-    add_timer (&gLedTimer);
-    gTimerOn = TRUE;
-} 
-
-
-// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and
-// restart the timer according to ledState
-void ledTimerExpire(void)
-{
-    int i;
-    PLED_INFO pCurLed;
-
-    gTimerOn = FALSE;
-
-    for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++)
-    {
-#if defined(DEBUG_LED)
-        printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown);
-#endif
-        switch (pCurLed->ledState)
-        {
-            case kLedStateOn:
-            case kLedStateOff:
-            case kLedStateFail:
-                pCurLed->blinkCountDown = 0;            // reset the blink count down
-                break;
-
-            case kLedStateBlinkOnce:
-                ledToggle(pCurLed);
-                pCurLed->blinkCountDown = 0;                      // reset to 0
-                pCurLed->ledState = pCurLed->savedLedState;
-                if (pCurLed->ledState == kLedStateSlowBlinkContinues || 
-                    pCurLed->ledState == kLedStateFastBlinkContinues)
-                    ledTimerStart();                  // start timer if in blinkContinues stats
-                break;
-
-            case kLedStateSlowBlinkContinues:
-                if (pCurLed->blinkCountDown-- == 0)
-                {
-                    pCurLed->blinkCountDown = kSlowBlinkCount;
-                    ledToggle(pCurLed);
-                }
-                ledTimerStart();
-                break;
-
-            case kLedStateFastBlinkContinues:
-                if (pCurLed->blinkCountDown-- == 0)
-                {
-                    pCurLed->blinkCountDown = kFastBlinkCount;
-                    ledToggle(pCurLed);
-                }
-                ledTimerStart();
-                break;
-
-            default:
-                printk("Invalid state = %d\n", pCurLed->ledState);
-        }
-    }
-}
-
-// initialize the gLedCount and allocate and fill gLed struct
-void __init boardLedInit(PLED_MAP_PAIR cLedMapping)
-{
-    PLED_MAP_PAIR p1, p2;
-    PLED_INFO pCurLed;
-    int needTimer = FALSE;
-    int alreadyUsed = 0;
-
-#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-    /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */
-    GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK;
-    GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS;
-#endif
-
-    memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) );
-    memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) );
-    memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) );
-
-    gLedCount = 0;
-
-    // Check for multiple LED names and multiple LED GPIO pins that share the
-    // same physical board LED.
-    for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-    {
-        alreadyUsed = 0;
-        for( p2 = cLedMapping; p2 != p1; p2++ )
-        {
-            if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-                (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-            {
-                alreadyUsed = 1;
-                break;
-            }
-        }
-
-        if( alreadyUsed == 0  )
-            gLedCount++;
-    }
-
-    gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL);
-    if( gLed == NULL )
-    {
-        printk( "LED memory allocation error.\n" );
-        return;
-    }
-
-    memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) );
-
-    // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led 
-    // (ledMask) the first defined led's ledInitState will be used.
-    pCurLed = gLed;
-    for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ )
-    {
-        if( (int) p1->ledName > MAX_VIRT_LEDS )
-            continue;
-
-        alreadyUsed = 0;
-        for( p2 = cLedMapping; p2 != p1; p2++ )
-        {
-            if( (p1->ledMask && p1->ledMask == p2->ledMask) ||
-                (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) )
-            {
-                alreadyUsed = 1;
-                break;
-            }
-        }
-
-        if( alreadyUsed == 0 )
-        {
-            // Initialize the board LED for the first time.
-            needTimer = initLedInfo( p1, pCurLed );
-            gpVirtLeds[(int) p1->ledName] = pCurLed;
-            pCurLed++;
-        }
-        else
-        {
-            PLED_INFO pLed;
-            for( pLed = gLed; pLed != pCurLed; pLed++ )
-            {
-                // Find the LED_INFO structure that has already been initialized.
-                if((pLed->ledMask && pLed->ledMask == p1->ledMask) ||
-                   (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail))
-                {
-                    // The board LED has already been initialized but possibly
-                    // not completely initialized.
-                    if( p1->ledMask )
-                    {
-                        pLed->ledMask = p1->ledMask;
-                        pLed->ledActiveLow = p1->ledActiveLow;
-                    }
-                    if( p1->ledMaskFail )
-                    {
-                        pLed->ledMaskFail = p1->ledMaskFail;
-                        pLed->ledActiveLowFail = p1->ledActiveLowFail;
-                    }
-                    gpVirtLeds[(int) p1->ledName] = pLed;
-                    break;
-                }
-            }
-        }
-    }
-
-    if (needTimer)
-        ledTimerStart();
-
-#if defined(DEBUG_LED)
-    int i;
-    for (i=0; i < gLedCount; i++)
-        printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState);
-#endif
-
-}
-
-// Initialize a structure that contains information about a physical board LED
-// control.  The board LED may contain more than one GPIO pin to control a
-// normal condition (green) or a failure condition (red).
-int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed )
-{
-    int needTimer = FALSE;
-    pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState;
-    pCurLed->ledMask = pCurMap->ledMask;
-    pCurLed->ledActiveLow = pCurMap->ledActiveLow;
-    pCurLed->ledMaskFail = pCurMap->ledMaskFail;
-    pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail;
-
-    switch (pCurLed->ledState)
-    {
-        case kLedStateOn:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOn(pCurLed);
-            break;
-        case kLedStateOff:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOff(pCurLed);
-            break;
-        case kLedStateFail:
-            pCurLed->blinkCountDown = 0;            // reset the blink count down
-            ledOnFail(pCurLed);
-            break;
-        case kLedStateBlinkOnce:
-            pCurLed->blinkCountDown = 1;
-            needTimer = TRUE;
-            break;
-        case kLedStateSlowBlinkContinues:
-            pCurLed->blinkCountDown = kSlowBlinkCount;
-            needTimer = TRUE;
-            break;
-        case kLedStateFastBlinkContinues:
-            pCurLed->blinkCountDown = kFastBlinkCount;
-            needTimer = TRUE;
-            break;
-        default:
-            printk("Invalid state = %d\n", pCurLed->ledState);
-    }
-
-    return( needTimer );
-}
-
-#if 0 /* BROKEN */
-// Determines if there is at least one interface in bridge mode.  Bridge mode
-// is determined by the cfm convention of naming bridge interfaces nas17
-// through nas24.
-static int isBridgedProtocol(void)
-{
-    extern int dev_get(const char *name);
-    const int firstBridgeId = 17;
-    const int lastBridgeId = 24;
-    int i;
-    int ret = FALSE;
-    char name[16];
-
-    for( i = firstBridgeId; i <= lastBridgeId; i++ )
-    {
-        sprintf( name, "nas%d", i );
-
-        if( dev_get(name) )
-        {
-            ret = TRUE;
-            break;
-        }
-    }
-
-    return(ret);
-}
-#endif
-
-// led ctrl.  Maps the ledName to the corresponding ledInfoPtr and perform the led operation
-void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
-    PLED_INFO ledInfoPtr;
-
-    // do the mapping from virtual to physical led
-    if( (int) ledName < MAX_VIRT_LEDS )
-        ledInfoPtr = gpVirtLeds[(int) ledName];
-    else
-        ledInfoPtr = NULL;
-
-    if (ledInfoPtr == NULL)
-        return;
-
-    if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] )
-    {
-        (*gLedHwFunc[(int) ledName]) (ledName, ledState);
-        ledOffFail(ledInfoPtr);
-        return;
-    }
-    else
-        if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] )
-        {
-            (*gLedHwFailFunc[(int) ledName]) (ledName, ledState);
-            ledOff(ledInfoPtr);
-            return;
-        }
-
-#if 0 /* BROKEN */
-    // Do not blink the WAN Data LED if at least one interface is in bridge mode.
-    if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP))
-    {
-        static int BridgedProtocol = -1;
-
-        if( BridgedProtocol == -1 )
-            BridgedProtocol = isBridgedProtocol();
-
-        if( BridgedProtocol == TRUE )
-            return;
-    }
-#endif
-
-    // If the state is kLedStateFail and there is not a failure LED defined
-    // in the board parameters, change the state to kLedStateFastBlinkContinues.
-    if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 )
-        ledState = kLedStateFastBlinkContinues;
-
-    switch (ledState)
-    {
-        case kLedStateOn:
-            // First, turn off the complimentary (failure) LED GPIO.
-            if( ledInfoPtr->ledMaskFail )
-                ledOffFail(ledInfoPtr);
-            else
-                if( gLedHwFailFunc[(int) ledName] )
-                    (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn on the specified LED GPIO.
-            ledOn(ledInfoPtr);
-            break;
-
-        case kLedStateOff: 
-            // First, turn off the complimentary (failure) LED GPIO.
-            if( ledInfoPtr->ledMaskFail )
-                ledOffFail(ledInfoPtr);
-            else
-                if( gLedHwFailFunc[(int) ledName] )
-                    (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn off the specified LED GPIO.
-            ledOff(ledInfoPtr);
-            break;
-
-        case kLedStateFail:
-            // First, turn off the complimentary (normal) LED GPIO.
-            if( ledInfoPtr->ledMask )
-                ledOff(ledInfoPtr);
-            else
-                if( gLedHwFunc[(int) ledName] )
-                    (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff);
-
-            // Next, turn on (red) the specified LED GPIO.
-            ledOnFail(ledInfoPtr);
-            break;
-
-        case kLedStateBlinkOnce:
-            // skip blinkOnce if it is already in Slow/Fast blink continues state
-            if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues ||
-                ledInfoPtr->savedLedState == kLedStateFastBlinkContinues)
-                ;
-            else
-            {
-                if (ledInfoPtr->blinkCountDown == 0)  // skip the call if it is 1
-                {
-                    ledToggle(ledInfoPtr);
-                    ledInfoPtr->blinkCountDown = 1;  // it will be reset to 0 when timer expires
-                    ledInfoPtr->ledState = kLedStateBlinkOnce;
-                    ledTimerStart();
-                }
-            }
-            break;
-
-        case kLedStateSlowBlinkContinues:
-            ledInfoPtr->blinkCountDown = kSlowBlinkCount;
-            ledInfoPtr->ledState = kLedStateSlowBlinkContinues;
-            ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues;
-            ledTimerStart();
-            break;
-
-        case kLedStateFastBlinkContinues:
-            ledInfoPtr->blinkCountDown = kFastBlinkCount;
-            ledInfoPtr->ledState = kLedStateFastBlinkContinues;
-            ledInfoPtr->savedLedState = kLedStateFastBlinkContinues;
-            ledTimerStart();
-            break;
-
-        default:
-            printk("Invalid led state\n");
-    }
-}
-
-// This function is called for an LED that is controlled by hardware.
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName,
-    HANDLE_LED_FUNC ledHwFunc, int ledFailType )
-{
-    if( (int) ledName < MAX_VIRT_LEDS )
-    {
-        if( ledFailType == 1 )
-            gLedHwFailFunc[(int) ledName] = ledHwFunc;
-        else
-            gLedHwFunc[(int) ledName] = ledHwFunc;
-    }
-}
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c
deleted file mode 100644 (file)
index e54b960..0000000
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-/* Includes. */
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/pagemap.h>
-#include <asm/uaccess.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/if.h>
-#include <linux/spinlock.h>
-
-#include <bcm_map_part.h>
-#include <board.h>
-#include <bcmTag.h>
-#include "boardparms.h"
-#include "bcm_intr.h"
-#include "board.h"
-#include "bcm_map_part.h"
-
-static DEFINE_SPINLOCK(board_lock);
-
-/* Typedefs. */
-#if defined (NON_CONSECUTIVE_MAC)
-// used to be the last octet. Now changed to the first 5 bits of the the forth octet
-// to reduced the duplicated MAC addresses.
-#define CHANGED_OCTET   3
-#define SHIFT_BITS      3
-#else
-#define CHANGED_OCTET   1
-#define SHIFT_BITS      0
-#endif
-
-typedef struct
-{
-    unsigned long ulId;
-    char chInUse;
-    char chReserved[3];
-} MAC_ADDR_INFO, *PMAC_ADDR_INFO;
-
-typedef struct
-{
-    unsigned long ulSdramSize;
-    unsigned long ulPsiSize;
-    unsigned long ulNumMacAddrs;
-    unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-    MAC_ADDR_INFO MacAddrs[1];
-} NVRAM_INFO, *PNVRAM_INFO;
-
-typedef struct
-{
-    unsigned long eventmask;    
-} BOARD_IOC, *PBOARD_IOC;
-
-
-/*Dyinggasp callback*/
-typedef void (*cb_dgasp_t)(void *arg);
-typedef struct _CB_DGASP__LIST
-{
-    struct list_head list;
-    char name[IFNAMSIZ];
-    cb_dgasp_t cb_dgasp_fn;
-    void *context;
-}CB_DGASP_LIST , *PCB_DGASP_LIST;
-
-
-static LED_MAP_PAIR LedMapping[] =
-{   // led name     Initial state       physical pin (ledMask)
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0}, 
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0}, 
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0},     
-    {kLedEnd,       kLedStateOff,       0, 0, 0, 0} // NOTE: kLedEnd has to be at the end.
-};
-
-/* Externs. */
-extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed);
-extern unsigned int nr_free_pages (void);
-extern const char *get_system_type(void);
-extern void kerSysFlashInit(void);
-extern unsigned long get_nvram_start_addr(void);
-extern unsigned long get_scratch_pad_start_addr(void);
-extern unsigned long getMemorySize(void);
-extern void __init boardLedInit(PLED_MAP_PAIR);
-extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName,
-    HANDLE_LED_FUNC ledHwFunc, int ledFailType );
-
-/* Prototypes. */
-void __init InitNvramInfo( void );
-
-/* DyingGasp function prototype */
-static void __init kerSysDyingGaspMapIntr(void);
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id);
-static void __init kerSysInitDyingGaspHandler( void );
-static void __exit kerSysDeinitDyingGaspHandler( void );
-/* -DyingGasp function prototype - */
-
-static PNVRAM_INFO g_pNvramInfo = NULL;
-static int g_ledInitialized = 0;
-static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL;
-
-static int g_wakeup_monitor = 0;
-static struct file *g_monitor_file = NULL;
-static struct task_struct *g_monitor_task = NULL;
-static unsigned int (*g_orig_fop_poll)
-    (struct file *, struct poll_table_struct *) = NULL;
-
-void kerSysMipsSoftReset(void)
-{
-    if (PERF->RevID == 0x634800A1) {
-        typedef void (*FNPTR) (void);
-        FNPTR bootaddr = (FNPTR) FLASH_BASE;
-        int i;
-
-        /* Disable interrupts. */
-        //cli();
-       spin_lock_irq(&board_lock);
-       
-        /* Reset all blocks. */
-        PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS;
-        for( i = 0; i < 1000000; i++ )
-            ;
-        PERF->BlockSoftReset |= BSR_ALL_BLOCKS;
-        /* Jump to the power on address. */
-        (*bootaddr) ();
-    }
-    else
-        PERF->pll_control |= SOFT_RESET;    // soft reset mips
-}
-
-
-int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId )
-{
-    int nRet = 0;
-    PMAC_ADDR_INFO pMai = NULL;
-    PMAC_ADDR_INFO pMaiFreeNoId = NULL;
-    PMAC_ADDR_INFO pMaiFreeId = NULL;
-    unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0;
-
-    /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas
-     *  * à relire plusieurs fois */
-    /* inv_xde */
-#if 0
-    if (boot_loader_type == BOOT_CFE)
-      memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,
-              NVRAM_MAC_ADDRESS_LEN );
-    else {
-#endif
-      pucaMacAddr[0] = 0x00;
-      pucaMacAddr[1] = 0x07;
-      pucaMacAddr[2] = 0x3A;
-      pucaMacAddr[3] = 0xFF;
-      pucaMacAddr[4] = 0xFF;
-      pucaMacAddr[5] = 0xFF;
-#if 0
-    }
-#endif
-
-    return nRet;
-} /* kerSysGetMacAddr */
-
-int kerSysReleaseMacAddress( unsigned char *pucaMacAddr )
-{
-    int nRet = -EINVAL;
-    unsigned long ulIdx = 0;
-    int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] -
-        g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]);
-
-    // if overflow 255 (negitive), add 256 to have the correct index
-    if (idx < 0)
-        idx += 256;
-    ulIdx = (unsigned long) (idx >> SHIFT_BITS);
-
-    if( ulIdx < g_pNvramInfo->ulNumMacAddrs )
-    {
-        PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx];
-        if( pMai->chInUse == 1 )
-        {
-            pMai->chInUse = 0;
-            nRet = 0;
-        }
-    }
-
-    return( nRet );
-} /* kerSysReleaseMacAddr */
-
-int kerSysGetSdramSize( void )
-{
-  if (boot_loader_type == BOOT_CFE) {
-    return( (int) g_pNvramInfo->ulSdramSize );
-  }
-  else {
-    printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000);
-    return((int)getMemorySize() + 0x00040000);
-  }
-} /* kerSysGetSdramSize */
-
-
-void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState)
-{
-    if (g_ledInitialized)
-      boardLedCtrl(ledName, ledState);
-}
-
-unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t)
-{
-    int mask = (*g_orig_fop_poll) (f, t);
-
-    if( g_wakeup_monitor == 1 && g_monitor_file == f )
-    {
-        /* If g_wakeup_monitor is non-0, the user mode application needs to
-         * return from a blocking select function.  Return POLLPRI which will
-         * cause the select to return with the exception descriptor set.
-         */
-        mask |= POLLPRI;
-        g_wakeup_monitor = 0;
-    }
-
-    return( mask );
-}
-
-/* Put the user mode application that monitors link state on a run queue. */
-void kerSysWakeupMonitorTask( void )
-{
-    g_wakeup_monitor = 1;
-    if( g_monitor_task )
-        wake_up_process( g_monitor_task );
-}
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-int kerSysGetResetHold(void)
-{
-       unsigned short gpio;
-
-       if( BpGetPressAndHoldResetGpio( &gpio ) == BP_SUCCESS )
-       {
-    unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio);
-    volatile unsigned long *gpio_reg = &GPIO->GPIOio;
-
-    if( (gpio & ~BP_ACTIVE_MASK) >= 32 )
-    {
-        gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio);
-        gpio_reg = &GPIO->GPIOio_high;
-    }
-       //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg);
-       if(*gpio_reg & gpio_mask)  //press down
-               return RESET_BUTTON_UP;
-       }
-       return RESET_BUTTON_PRESSDOWN;
-}
-//<<JUNHON, 2004/09/15
-
-/***************************************************************************
- * Dying gasp ISR and functions.
- ***************************************************************************/
-#define KERSYS_DBG     printk
-
-#if defined(CONFIG_BCM96345)
-#define        CYCLE_PER_US    70
-#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)
-/* The BCM6348 cycles per microsecond is really variable since the BCM6348
- * MIPS speed can vary depending on the PLL settings.  However, an appoximate
- * value of 120 will still work OK for the test being done.
- */
-#define        CYCLE_PER_US    120
-#endif
-#define        DG_GLITCH_TO    (100*CYCLE_PER_US)
-static void __init kerSysDyingGaspMapIntr()
-{
-    unsigned long ulIntr;
-       
-#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_)
-    if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-               BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG);
-               BcmHalInterruptEnable( INTERRUPT_ID_DG );
-    }
-#elif defined(CONFIG_BCM96345) || defined(_BCM96345_)
-    if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) {
-        ulIntr += INTERRUPT_ID_EXTERNAL_0;
-        BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr);
-        BcmHalInterruptEnable( ulIntr );
-    }
-#endif
-
-} 
-
-void kerSysSetWdTimer(ulong timeUs)
-{
-       TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000);
-       TIMER->WatchDogCtl = 0xFF00;
-       TIMER->WatchDogCtl = 0x00FF;
-}
-
-ulong kerSysGetCycleCount(void)
-{
-    ulong cnt; 
-#ifdef _WIN32_WCE
-    cnt = 0;
-#else
-    __asm volatile("mfc0 %0, $9":"=d"(cnt));
-#endif
-    return(cnt); 
-}
-
-static Bool kerSysDyingGaspCheckPowerLoss(void)
-{
-    ulong clk0;
-    ulong ulIntr;
-
-    ulIntr = 0;
-    clk0 = kerSysGetCycleCount();
-
-    UART->Data = 'D';
-    UART->Data = '%';
-    UART->Data = 'G';
-
-#if defined(CONFIG_BCM96345)
-    BpGetAdslDyingGaspExtIntr( &ulIntr );
-
-    do {
-        ulong clk1;
-        
-        clk1 = kerSysGetCycleCount();          /* time cleared */
-       /* wait a little to get new reading */
-        while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-            ;
-    } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
-    if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) {  /* power glitch */
-        BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0);
-        KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-        return 0;
-    }
-#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS)
-    do {
-        ulong clk1;
-        
-        clk1 = kerSysGetCycleCount();          /* time cleared */
-       /* wait a little to get new reading */
-        while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2)
-            ;
-     } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO));
-
-    if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) {
-        BcmHalInterruptEnable( INTERRUPT_ID_DG );
-        KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US);
-        return 0;
-    }
-#endif
-    return 1;
-}
-
-static void kerSysDyingGaspShutdown( void )
-{
-    kerSysSetWdTimer(1000000);
-#if defined(CONFIG_BCM96345)
-    PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN);
-#elif defined(CONFIG_BCM96348)
-    PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN);
-#endif
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id)
-#else
-static unsigned int kerSysDyingGaspIsr(void)
-#endif
-{      
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp, *dsl = NULL;   
-
-    if (kerSysDyingGaspCheckPowerLoss()) {        
-
-        /* first to turn off everything other than dsl */        
-        list_for_each(pos, &g_cb_dgasp_list_head->list) {      
-            tmp = list_entry(pos, CB_DGASP_LIST, list);
-           if(strncmp(tmp->name, "dsl", 3)) {
-               (tmp->cb_dgasp_fn)(tmp->context); 
-           }else {
-               dsl = tmp;                      
-           }       
-        }  
-        
-        /* now send dgasp */
-        if(dsl)
-            (dsl->cb_dgasp_fn)(dsl->context); 
-
-        /* reset and shutdown system */
-        kerSysDyingGaspShutdown();
-    }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-return( IRQ_HANDLED );
-#else
-    return( 1 );
-#endif
-}
-
-static void __init kerSysInitDyingGaspHandler( void )
-{
-    CB_DGASP_LIST *new_node;
-
-    if( g_cb_dgasp_list_head != NULL) {
-        printk("Error: kerSysInitDyingGaspHandler: list head is not null\n");
-        return;        
-    }
-    new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-    memset(new_node, 0x00, sizeof(CB_DGASP_LIST));
-    INIT_LIST_HEAD(&new_node->list);    
-    g_cb_dgasp_list_head = new_node; 
-               
-} /* kerSysInitDyingGaspHandler */
-
-static void __exit kerSysDeinitDyingGaspHandler( void )
-{
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp; 
-       
-    if(g_cb_dgasp_list_head == NULL)
-        return;
-        
-    list_for_each(pos, &g_cb_dgasp_list_head->list) {          
-       tmp = list_entry(pos, CB_DGASP_LIST, list);
-        list_del(pos);
-       kfree(tmp);
-    }       
-
-    kfree(g_cb_dgasp_list_head);       
-    g_cb_dgasp_list_head = NULL;
-    
-} /* kerSysDeinitDyingGaspHandler */
-
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context)
-{
-    CB_DGASP_LIST *new_node;
-
-    if( g_cb_dgasp_list_head == NULL) {
-        printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n");  
-        return;    
-    }
-    
-    if( devname == NULL || cbfn == NULL ) {
-        printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context);            
-        return;
-    }
-       
-    new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL);
-    memset(new_node, 0x00, sizeof(CB_DGASP_LIST));    
-    INIT_LIST_HEAD(&new_node->list);
-    strncpy(new_node->name, devname, IFNAMSIZ);
-    new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn;
-    new_node->context = context;
-    list_add(&new_node->list, &g_cb_dgasp_list_head->list);
-    
-    printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname);
-               
-} /* kerSysRegisterDyingGaspHandler */
-
-void kerSysDeregisterDyingGaspHandler(char *devname)
-{
-    struct list_head *pos;
-    CB_DGASP_LIST *tmp;    
-    
-    if(g_cb_dgasp_list_head == NULL) {
-        printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n");
-        return;        
-    }
-
-    if(devname == NULL) {
-        printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n");
-        return;        
-    }
-    
-    printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname);
-
-    list_for_each(pos, &g_cb_dgasp_list_head->list) {          
-       tmp = list_entry(pos, CB_DGASP_LIST, list);
-       if(!strcmp(tmp->name, devname)) {
-            list_del(pos);
-           kfree(tmp);
-           printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname);
-           return;
-       }
-    }  
-    printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname);
-       
-} /* kerSysDeregisterDyingGaspHandler */
-
-//EXPORT_SYMBOL(kerSysNvRamGet);
-EXPORT_SYMBOL(kerSysGetMacAddress);
-EXPORT_SYMBOL(kerSysReleaseMacAddress);
-EXPORT_SYMBOL(kerSysGetSdramSize);
-EXPORT_SYMBOL(kerSysLedCtrl);
-EXPORT_SYMBOL(kerSysGetResetHold);
-EXPORT_SYMBOL(kerSysLedRegisterHwHandler);
-EXPORT_SYMBOL(BpGetBoardIds);
-EXPORT_SYMBOL(BpGetSdramSize);
-EXPORT_SYMBOL(BpGetPsiSize);
-EXPORT_SYMBOL(BpGetEthernetMacInfo);
-EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios);
-EXPORT_SYMBOL(BpGetPressAndHoldResetGpio);
-EXPORT_SYMBOL(BpGetVoipResetGpio);
-EXPORT_SYMBOL(BpGetVoipIntrGpio);
-EXPORT_SYMBOL(BpGetPcmciaResetGpio);
-EXPORT_SYMBOL(BpGetRtsCtsUartGpios);
-EXPORT_SYMBOL(BpGetAdslLedGpio);
-EXPORT_SYMBOL(BpGetAdslFailLedGpio);
-EXPORT_SYMBOL(BpGetWirelessLedGpio);
-EXPORT_SYMBOL(BpGetUsbLedGpio);
-EXPORT_SYMBOL(BpGetHpnaLedGpio);
-EXPORT_SYMBOL(BpGetWanDataLedGpio);
-EXPORT_SYMBOL(BpGetPppLedGpio);
-EXPORT_SYMBOL(BpGetPppFailLedGpio);
-EXPORT_SYMBOL(BpGetVoipLedGpio);
-EXPORT_SYMBOL(BpGetWirelessExtIntr);
-EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr);
-EXPORT_SYMBOL(BpGetVoipExtIntr);
-EXPORT_SYMBOL(BpGetHpnaExtIntr);
-EXPORT_SYMBOL(BpGetHpnaChipSelect);
-EXPORT_SYMBOL(BpGetVoipChipSelect);
-EXPORT_SYMBOL(BpGetWirelessSesBtnGpio);
-EXPORT_SYMBOL(BpGetWirelessSesExtIntr);
-EXPORT_SYMBOL(BpGetWirelessSesLedGpio);
-EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler);
-EXPORT_SYMBOL(kerSysGetCycleCount);
-EXPORT_SYMBOL(kerSysSetWdTimer);
-EXPORT_SYMBOL(kerSysWakeupMonitorTask);
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c
deleted file mode 100644 (file)
index 1143ded..0000000
+++ /dev/null
@@ -1,2391 +0,0 @@
-/*
-<:copyright-gpl 
-
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-
-:>
-*/
-/**************************************************************************
- * File Name  : boardparms.c
- *
- * Description: This file contains the implementation for the BCM63xx board
- *              parameter access functions.
- * 
- * Updates    : 07/14/2003  Created.
- ***************************************************************************/
-
-/* Includes. */
-#include "boardparms.h"
-
-/* Defines. */
-
-/* Default psi size in K bytes */
-#define BP_PSI_DEFAULT_SIZE                     24   
-
-/* Typedefs */
-typedef struct boardparameters
-{
-    char szBoardId[BP_BOARD_ID_LEN];        /* board id string */
-    ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS];
-    VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP];
-    unsigned short usSdramSize;             /* SDRAM size and type */
-    unsigned short usPsiSize;               /* persistent storage in K bytes */
-    unsigned short usGpioRj11InnerPair;     /* GPIO pin or not defined */
-    unsigned short usGpioRj11OuterPair;     /* GPIO pin or not defined */
-    unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */
-    unsigned short usGpioPcmciaReset;       /* GPIO pin or not defined */
-    unsigned short usGpioUartRts;           /* GPIO pin or not defined */
-    unsigned short usGpioUartCts;           /* GPIO pin or not defined */
-    unsigned short usGpioLedAdsl;           /* GPIO pin or not defined */
-    unsigned short usGpioLedAdslFail;       /* GPIO pin or not defined */
-    unsigned short usGpioLedWireless;       /* GPIO pin or not defined */
-    unsigned short usGpioLedUsb;            /* GPIO pin or not defined */
-    unsigned short usGpioLedHpna;           /* GPIO pin or not defined */
-    unsigned short usGpioLedWanData;        /* GPIO pin or not defined */
-    unsigned short usGpioLedPpp;            /* GPIO pin or not defined */
-    unsigned short usGpioLedPppFail;        /* GPIO pin or not defined */
-    unsigned short usGpioLedBlPowerOn;      /* GPIO pin or not defined */
-    unsigned short usGpioLedBlAlarm;        /* GPIO pin or not defined */
-    unsigned short usGpioLedBlResetCfg;     /* GPIO pin or not defined */
-    unsigned short usGpioLedBlStop;         /* GPIO pin or not defined */
-    unsigned short usExtIntrWireless;       /* ext intr or not defined */
-    unsigned short usExtIntrAdslDyingGasp;  /* ext intr or not defined */
-    unsigned short usExtIntrHpna;           /* ext intr or not defined */
-    unsigned short usCsHpna;                /* chip select not defined */
-    unsigned short usAntInUseWireless;     /* antenna in use or not defined */
-    unsigned short usGpioSesBtnWireless;    /* GPIO pin or not defined */
-    unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */        
-    unsigned short usGpioLedSesWireless;    /* GPIO pin or not defined */        
-} BOARD_PARAMETERS, *PBOARD_PARAMETERS;
-
-/* Variables */
-#if defined(_BCM96338_) || defined(CONFIG_BCM96338)
-static BOARD_PARAMETERS g_bcm96338sv =
-{
-    "96338SV",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_NOT_DEFINED,                         /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_NOT_DEFINED,                         /* usGpioLedBlResetCfg */
-    BP_NOT_DEFINED,                         /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */     
-};
-static BOARD_PARAMETERS g_bcm96338l2m8m =
-{
-    "96338L-2M-8M",                         /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */    
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */         
-};
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96338sv, &g_bcm96338l2m8m, 0};
-#endif
-
-#if defined(_BCM96345_) || defined(CONFIG_BCM96345)
-static BOARD_PARAMETERS g_bcm96345r =
-{
-    "96345R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_12_AH,                          /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_9_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345gw2 =
-{
-    /* A hardware jumper determines whether GPIO 13 is used for Press and Hold
-     * Reset or RTS.
-     */
-    "96345GW2",                             /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_GPIO_0_AH,                         /* usGpioPhySpiSck */
-      BP_GPIO_4_AH,                         /* usGpioPhySpiSs */
-      BP_GPIO_12_AH,                        /* usGpioPhySpiMosi */
-      BP_GPIO_11_AH,                        /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_GPIO,                  /* usConfigType */
-      BP_ENET_REVERSE_MII},                 /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_1,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_15_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_GPIO_2_AH,                           /* usGpioPcmciaReset */
-    BP_GPIO_13_AH,                          /* usGpioUartRts */
-    BP_GPIO_9_AH,                           /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_GPIO_7_AH,                           /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_7_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_EXT_INTR_2,                          /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96345gw =
-{
-    "96345GW",                              /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_ENET_NO_REVERSE_MII},              /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_1,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_15_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_1_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_1_AH,                           /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_GPIO_2_AH,                           /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_GPIO_10_AH,                          /* usGpioLedWireless */
-    BP_GPIO_7_AH,                           /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_9_AH,                           /* usGpioLedBlAlarm */
-    BP_GPIO_10_AH,                          /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_EXT_INTR_2,                          /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_EXT_INTR_3,                          /* usExtIntrHpna */
-    BP_CS_1,                                /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96335r =
-{
-    "96335R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_14_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_9_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_9_AH,                           /* usGpioLedWanData */
-    BP_GPIO_8_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_8_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_9_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96345r0 =
-{
-    "96345R0",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_9_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_9_AH,                           /* usGpioLedBlAlarm */
-    BP_GPIO_8_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */     
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96345rs =
-{
-    "96345RS",                              /* szBoardId */
-    {{BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_ENET_NO_REVERSE_MII},              /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_GPIO_11_AH,                          /* usGpioRj11InnerPair */
-    BP_GPIO_12_AH,                          /* usGpioRj11OuterPair */
-    BP_GPIO_13_AH,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_GPIO_8_AH,                           /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_8_AH,                           /* usGpioLedWanData */
-    BP_GPIO_9_AH,                           /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_GPIO_10_AH,                          /* usGpioLedBlAlarm */
-    BP_GPIO_9_AH,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_8_AH,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_EXT_INTR_0,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0,
-     &g_bcm96345rs, 0};
-#endif
-
-#if defined(_BCM96348_) || defined(CONFIG_BCM96348)
-
-static BOARD_PARAMETERS g_bcm96348r =
-{
-    "96348R",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY}},                     /* ucPhyType */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_8MB_1_CHIP,                   /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_7_AH,                           /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96348lv =
-{
-    "96348LV",                               /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_PHY,                 /* ucPhyType */
-      0x02,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_GPIO_5_AL,                         /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED}},                     /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_7_AH,                           /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw =
-{
-    "96348GW",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_0,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED, /* BP_GPIO_35_AH, */    /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED, /* BP_EXT_INTR_3, */    /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED  /* BP_GPIO_0_AL   */    /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_10 =
-{
-    "96348GW-10",                           /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_6_AH,                         /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static BOARD_PARAMETERS g_bcm96348gw_11 =
-{
-    "96348GW-11",                           /* szBoardId */
-    {{BP_ENET_NO_PHY},                      /* ucPhyType */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x04,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */    
-};
-
-static BOARD_PARAMETERS g_bcm96348sv =
-{
-    "96348SV",                              /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_PHY,                 /* ucPhyType */
-      0x1f,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED}},                     /* usReverseMii */
-    {{BP_VOIP_NO_DSP},                      /* ucDspType */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_32MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_NOT_DEFINED,                         /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_NOT_DEFINED,                         /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_NOT_DEFINED,                         /* usGpioLedWanData */
-    BP_NOT_DEFINED,                         /* usGpioLedPpp */
-    BP_NOT_DEFINED,                         /* usGpioLedPppFail */
-    BP_NOT_DEFINED,                         /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_NOT_DEFINED,                         /* usGpioLedBlResetCfg */
-    BP_NOT_DEFINED,                         /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcm96348gw_dualDsp =
-{
-    "96348GW-DualDSP",                      /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_EXTERNAL_SWITCH,              /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x03,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_UNEQUIPPED,                        /* usGpioVoipReset */
-      BP_GPIO_34_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_DSP,                          /* ucDspType */
-      0x01,                                 /* ucDspAddress */
-      BP_EXT_INTR_3,                        /* usExtIntrVoip */
-      BP_UNEQUIPPED ,                       /* usGpioVoipReset */
-      BP_GPIO_35_AH,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_3}},                            /* usCsVoip */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_HW_DEFINED,                          /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_WLAN_ANT_MAIN,                       /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-
-static BOARD_PARAMETERS g_bcmCustom_01 =
-{
-     "BCMCUST_01",                          /* szBoardId */
-    {{BP_ENET_INTERNAL_PHY,                 /* ucPhyType */
-      0x01,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_MDIO,                  /* usConfigType */
-      BP_NOT_DEFINED},                      /* usReverseMii */
-     {BP_ENET_NO_PHY,                       /* ucPhyType */
-      0x00,                                 /* ucPhyAddress */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSck */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiSs */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMosi */
-      BP_NOT_DEFINED,                       /* usGpioPhySpiMiso */
-      BP_NOT_DEFINED,                       /* usGpioPhyReset */
-      0x01,                                 /* numSwitchPorts */
-      BP_ENET_CONFIG_SPI_SSB_1,             /* usConfigType */
-      BP_ENET_REVERSE_MII}},                /* usReverseMii */
-    {{BP_VOIP_DSP,                          /* ucDspType */
-      0x00,                                 /* ucDspAddress */
-      BP_EXT_INTR_2,                        /* usExtIntrVoip */
-      BP_GPIO_36_AH,                        /* usGpioVoipReset */
-      BP_GPIO_34_AL,                        /* usGpioVoipIntr */
-      BP_NOT_DEFINED,                       /* usGpioLedVoip */
-      BP_CS_2},                             /* usCsVoip */
-     {BP_VOIP_NO_DSP}},                     /* ucDspType */
-    BP_MEMORY_16MB_2_CHIP,                  /* usSdramSize */
-    BP_PSI_DEFAULT_SIZE,                    /* usPsiSize */
-    BP_NOT_DEFINED,                         /* usGpioRj11InnerPair */
-    BP_NOT_DEFINED,                         /* usGpioRj11OuterPair */
-    BP_GPIO_33_AL,                          /* usGpioPressAndHoldReset */
-    BP_NOT_DEFINED,                         /* usGpioPcmciaReset */
-    BP_NOT_DEFINED,                         /* usGpioUartRts */
-    BP_NOT_DEFINED,                         /* usGpioUartCts */
-    BP_NOT_DEFINED,                         /* usGpioLedAdsl */
-    BP_GPIO_2_AL,                           /* usGpioLedAdslFail */
-    BP_NOT_DEFINED,                         /* usGpioLedWireless */
-    BP_NOT_DEFINED,                         /* usGpioLedUsb */
-    BP_NOT_DEFINED,                         /* usGpioLedHpna */
-    BP_GPIO_3_AL,                           /* usGpioLedWanData */
-    BP_GPIO_3_AL,                           /* usGpioLedPpp */
-    BP_GPIO_4_AL,                           /* usGpioLedPppFail */
-    BP_GPIO_0_AL,                           /* usGpioLedBlPowerOn */
-    BP_NOT_DEFINED,                         /* usGpioLedBlAlarm */
-    BP_GPIO_3_AL,                           /* usGpioLedBlResetCfg */
-    BP_GPIO_1_AL,                           /* usGpioLedBlStop */
-    BP_NOT_DEFINED,                         /* usExtIntrWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrAdslDyingGasp */
-    BP_NOT_DEFINED,                         /* usExtIntrHpna */
-    BP_NOT_DEFINED,                         /* usCsHpna */
-    BP_NOT_DEFINED,                         /* usAntInUseWireless */
-    BP_NOT_DEFINED,                         /* usGpioSesBtnWireless */
-    BP_NOT_DEFINED,                         /* usExtIntrSesBtnWireless */
-    BP_NOT_DEFINED                          /* usGpioLedSesWireless */
-};
-
-static PBOARD_PARAMETERS g_BoardParms[] =
-    {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10,
-     &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp,
-     &g_bcmCustom_01, 0};
-#endif
-
-static PBOARD_PARAMETERS g_pCurrentBp = 0;
-
-/**************************************************************************
- * Name       : bpstrcmp
- *
- * Description: String compare for this file so it does not depend on an OS.
- *              (Linux kernel and CFE share this source file.)
- *
- * Parameters : [IN] dest - destination string
- *              [IN] src - source string
- *
- * Returns    : -1 - dest < src, 1 - dest > src, 0 dest == src
- ***************************************************************************/
-static int bpstrcmp(const char *dest,const char *src);
-static int bpstrcmp(const char *dest,const char *src)
-{
-    while (*src && *dest)
-    {
-        if (*dest < *src) return -1;
-        if (*dest > *src) return 1;
-        dest++;
-        src++;
-    }
-
-    if (*dest && !*src) return 1;
-    if (!*dest && *src) return -1;
-    return 0;
-} /* bpstrcmp */
-
-/**************************************************************************
- * Name       : BpGetVoipDspConfig
- *
- * Description: Gets the DSP configuration from the board parameter
- *              structure for a given DSP index.
- *
- * Parameters : [IN] dspNum - DSP index (number)
- *
- * Returns    : Pointer to DSP configuration block if found/valid, NULL
- *              otherwise.
- ***************************************************************************/
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum );
-VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum )
-{
-    VOIP_DSP_INFO *pDspConfig = 0;
-    int i;
-
-    if( g_pCurrentBp )
-    {
-        for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ )
-        {
-            if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP &&
-                g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum )
-            {
-                pDspConfig = &g_pCurrentBp->VoIPDspInfo[i];
-                break;
-            }
-        }
-    }
-
-    return pDspConfig;
-}
-
-
-/**************************************************************************
- * Name       : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- *              specified board id string and assigns it to a global, static
- *              variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- *                  have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId )
-{
-    int nRet = BP_BOARD_ID_NOT_FOUND;
-    PBOARD_PARAMETERS *ppBp;
-
-    for( ppBp = g_BoardParms; *ppBp; ppBp++ )
-    {
-        if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) )
-        {
-            g_pCurrentBp = *ppBp;
-            nRet = BP_SUCCESS;
-            break;
-        }
-    }
-
-    return( nRet );
-} /* BpSetBoardId */
-
-/**************************************************************************
- * Name       : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- *                  strings are returned in.  Each id starts at BP_BOARD_ID_LEN
- *                  boundary.
- *              [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- *                  were allocated in pszBoardIds.
- *
- * Returns    : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize )
-{
-    PBOARD_PARAMETERS *ppBp;
-    int i;
-    char *src;
-    char *dest;
-
-    for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize;
-        i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN )
-    {
-        dest = pszBoardIds;
-        src = (*ppBp)->szBoardId;
-        while( *src )
-            *dest++ = *src++;
-        *dest = '\0';
-    }
-
-    return( i );
-} /* BpGetBoardIds */
-
-/**************************************************************************
- * Name       : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- *                  buffers.
- *              [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- *                  are pointed to by pEnetInfos.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos )
-{
-    int i, nRet;
-
-    if( g_pCurrentBp )
-    {
-        for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-        {
-            if( i < BP_MAX_ENET_MACS )
-            {
-                unsigned char *src = (unsigned char *)
-                    &g_pCurrentBp->EnetMacInfos[i];
-                unsigned char *dest = (unsigned char *) pEnetInfos;
-                int len = sizeof(ETHERNET_MAC_INFO);
-                while( len-- )
-                    *dest++ = *src++;
-            }
-            else
-                pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-        }
-
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ )
-            pEnetInfos->ucPhyType = BP_ENET_NO_PHY;
-
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetEthernetMacInfo */
-
-/**************************************************************************
- * Name       : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- *              SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- *                  is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulSdramSize = g_pCurrentBp->usSdramSize;
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        *pulSdramSize = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetSdramSize */
-
-/**************************************************************************
- * Name       : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- *                  storage size is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulPsiSize = g_pCurrentBp->usPsiSize;
-        nRet = BP_SUCCESS;
-    }
-    else
-    {
-        *pulPsiSize = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPsiSize */
-
-/**************************************************************************
- * Name       : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- *              between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- *                  GPIO pin is returned in.
- *              [OUT] pusOuter - Address of short word that the RJ11 outer pair
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-    unsigned short *pusOuter )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusInner = g_pCurrentBp->usGpioRj11InnerPair;
-        *pusOuter = g_pCurrentBp->usGpioRj11OuterPair;
-
-        if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED &&
-            g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusInner = *pusOuter = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetRj11InnerOuterPairGpios */
-
-/**************************************************************************
- * Name       : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- *              and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- *                  reset button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioPressAndHoldReset;
-
-        if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPressAndHoldResetGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioVoipReset;
-
-           if( *pusValue != BP_NOT_DEFINED ||
-               *pusValue == BP_UNEQUIPPED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipResetGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioVoipIntr;
-
-           if( *pusValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipIntrGpio */
-
-/**************************************************************************
- * Name       : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioPcmciaReset;
-
-        if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPcmciaResetGpio */
-
-/**************************************************************************
- * Name       : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- *              UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- *                  pin is returned in.
- *              [OUT] pusCts - Address of short word that the UART CTS GPIO
- *                  pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, board id input string does not
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusRts = g_pCurrentBp->usGpioUartRts;
-        *pusCts = g_pCurrentBp->usGpioUartCts;
-
-        if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED &&
-            g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusRts = *pusCts = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetUartRtsCtsGpios */
-
-/**************************************************************************
- * Name       : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedAdsl;
-
-        if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslLedGpio */
-
-/**************************************************************************
- * Name       : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedAdslFail;
-
-        if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslFailLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedWireless;
-
-        if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWirelessLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- *                  is in use.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usAntInUseWireless;
-
-        if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );    
-} /* BpGetWirelessAntInUse */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioSesBtnWireless;
-
-        if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );    
-} /* BpGetWirelessSesBtnGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the 
- *              Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  external interrup is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless;
-
-        if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );    
-               
-} /* BpGetWirelessSesExtIntr */
-
-/**************************************************************************
- * Name       : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Led GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedSesWireless;
-
-        if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-       
-} /* BpGetWirelessSesLedGpio */
-
-/**************************************************************************
- * Name       : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedUsb;
-
-        if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetUsbLedGpio */
-
-/**************************************************************************
- * Name       : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedHpna;
-
-        if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedWanData;
-
-        if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWanDataLedGpio */
-
-/**************************************************************************
- * Name       : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedPpp;
-
-        if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPppLedGpio */
-
-/**************************************************************************
- * Name       : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedPppFail;
-
-        if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetPppFailLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- *              on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlPowerOn;
-
-        if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderPowerOn */
-
-/**************************************************************************
- * Name       : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- *              LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlAlarm;
-
-        if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderAlarmLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- *              configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- *                  configuration LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlResetCfg;
-
-        if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderResetCfgLedGpio */
-
-/**************************************************************************
- * Name       : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- *              into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- *                  bootloader LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pusValue = g_pCurrentBp->usGpioLedBlStop;
-
-        if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetBootloaderStopLedGpio */
-
-/**************************************************************************
- * Name       : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- *
- * Note       : The VoIP structure would allow for having one LED per DSP
- *              however, the board initialization function assumes only one
- *              LED per functionality (ie one LED for VoIP).  Therefore in
- *              order to keep this tidy and simple we do not make usage of the
- *              one-LED-per-DSP function.  Instead, we assume that the LED for
- *              VoIP is unique and associated with DSP 0 (always present on
- *              any VoIP platform).  If changing this to a LED-per-DSP function
- *              then one need to update the board initialization driver in
- *              bcmdrivers\opensource\char\board\bcm963xx\impl1
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 );
-
-        if( pDspInfo )
-        {
-           *pusValue = pDspInfo->usGpioLedVoip;
-
-           if( *pusValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pusValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pusValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipLedGpio */
-
-/**************************************************************************
- * Name       : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrWireless;
-
-        if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetWirelessExtIntr */
-
-/**************************************************************************
- * Name       : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- *              number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp;
-
-        if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetAdslDyingGaspExtIntr */
-
-/**************************************************************************
- * Name       : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  external interrupt number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pulValue = pDspInfo->usExtIntrVoip;
-
-           if( *pulValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pulValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipExtIntr */
-
-/**************************************************************************
- * Name       : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usExtIntrHpna;
-
-        if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaExtIntr */
-
-/**************************************************************************
- * Name       : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  chip select number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        *pulValue = g_pCurrentBp->usCsHpna;
-
-        if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED )
-        {
-            nRet = BP_SUCCESS;
-        }
-        else
-        {
-            nRet = BP_VALUE_NOT_DEFINED;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetHpnaChipSelect */
-
-/**************************************************************************
- * Name       : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  chip select number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue )
-{
-    int nRet;
-
-    if( g_pCurrentBp )
-    {
-        VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum );
-
-        if( pDspInfo )
-        {
-           *pulValue = pDspInfo->usCsVoip;
-
-           if( *pulValue != BP_NOT_DEFINED )
-           {
-              nRet = BP_SUCCESS;
-           }
-           else
-           {
-              nRet = BP_VALUE_NOT_DEFINED;
-           }
-        }
-        else
-        {
-           *pulValue = BP_NOT_DEFINED;
-           nRet = BP_BOARD_ID_NOT_FOUND;
-        }
-    }
-    else
-    {
-        *pulValue = BP_NOT_DEFINED;
-        nRet = BP_BOARD_ID_NOT_SET;
-    }
-
-    return( nRet );
-} /* BpGetVoipChipSelect */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h
deleted file mode 100644 (file)
index 08ba24c..0000000
+++ /dev/null
@@ -1,758 +0,0 @@
-/*
-<:copyright-gpl 
-
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-
-:>
-*/
-/**************************************************************************
- * File Name  : boardparms.h
- *
- * Description: This file contains definitions and function prototypes for
- *              the BCM63xx board parameter access functions.
- * 
- * Updates    : 07/14/2003  Created.
- ***************************************************************************/
-
-#if !defined(_BOARDPARMS_H)
-#define _BOARDPARMS_H
-
-/* Return codes. */
-#define BP_SUCCESS                              0
-#define BP_BOARD_ID_NOT_FOUND                   1
-#define BP_VALUE_NOT_DEFINED                    2
-#define BP_BOARD_ID_NOT_SET                     3
-
-/* Values for BpGetSdramSize. */
-#define BP_MEMORY_8MB_1_CHIP                    0
-#define BP_MEMORY_16MB_1_CHIP                   1
-#define BP_MEMORY_32MB_1_CHIP                   2
-#define BP_MEMORY_64MB_2_CHIP                   3
-#define BP_MEMORY_32MB_2_CHIP                   4
-#define BP_MEMORY_16MB_2_CHIP                   5
-
-/* Values for EthernetMacInfo PhyType. */
-#define BP_ENET_NO_PHY                          0
-#define BP_ENET_INTERNAL_PHY                    1
-#define BP_ENET_EXTERNAL_PHY                    2
-#define BP_ENET_EXTERNAL_SWITCH                 3
-
-/* Values for EthernetMacInfo Configuration type. */
-#define BP_ENET_CONFIG_MDIO                     0       /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */
-#define BP_ENET_CONFIG_GPIO                     1       /* Bcm96345GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY          2       /* Bcm96348GW board + Bcm5325E */
-#define BP_ENET_CONFIG_SPI_SSB_0                3       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_1                4       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_2                5       /* Bcm96348GW board + Bcm5325M/E */
-#define BP_ENET_CONFIG_SPI_SSB_3                6       /* Bcm96348GW board + Bcm5325M/E */
-
-/* Values for EthernetMacInfo Reverse MII. */
-#define BP_ENET_NO_REVERSE_MII                  0
-#define BP_ENET_REVERSE_MII                     1
-
-/* Values for VoIPDSPInfo DSPType. */
-#define BP_VOIP_NO_DSP                          0
-#define BP_VOIP_DSP                             1
-
-
-/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */
-#define BP_ACTIVE_MASK                          0x8000
-#define BP_ACTIVE_HIGH                          0x0000
-#define BP_ACTIVE_LOW                           0x8000
-#define BP_GPIO_0_AH                            (0  | BP_ACTIVE_HIGH)
-#define BP_GPIO_0_AL                            (0  | BP_ACTIVE_LOW)
-#define BP_GPIO_1_AH                            (1  | BP_ACTIVE_HIGH)
-#define BP_GPIO_1_AL                            (1  | BP_ACTIVE_LOW)
-#define BP_GPIO_2_AH                            (2  | BP_ACTIVE_HIGH)
-#define BP_GPIO_2_AL                            (2  | BP_ACTIVE_LOW)
-#define BP_GPIO_3_AH                            (3  | BP_ACTIVE_HIGH)
-#define BP_GPIO_3_AL                            (3  | BP_ACTIVE_LOW)
-#define BP_GPIO_4_AH                            (4  | BP_ACTIVE_HIGH)
-#define BP_GPIO_4_AL                            (4  | BP_ACTIVE_LOW)
-#define BP_GPIO_5_AH                            (5  | BP_ACTIVE_HIGH)
-#define BP_GPIO_5_AL                            (5  | BP_ACTIVE_LOW)
-#define BP_GPIO_6_AH                            (6  | BP_ACTIVE_HIGH)
-#define BP_GPIO_6_AL                            (6  | BP_ACTIVE_LOW)
-#define BP_GPIO_7_AH                            (7  | BP_ACTIVE_HIGH)
-#define BP_GPIO_7_AL                            (7  | BP_ACTIVE_LOW)
-#define BP_GPIO_8_AH                            (8  | BP_ACTIVE_HIGH)
-#define BP_GPIO_8_AL                            (8  | BP_ACTIVE_LOW)
-#define BP_GPIO_9_AH                            (9  | BP_ACTIVE_HIGH)
-#define BP_GPIO_9_AL                            (9  | BP_ACTIVE_LOW)
-#define BP_GPIO_10_AH                           (10 | BP_ACTIVE_HIGH)
-#define BP_GPIO_10_AL                           (10 | BP_ACTIVE_LOW)
-#define BP_GPIO_11_AH                           (11 | BP_ACTIVE_HIGH)
-#define BP_GPIO_11_AL                           (11 | BP_ACTIVE_LOW)
-#define BP_GPIO_12_AH                           (12 | BP_ACTIVE_HIGH)
-#define BP_GPIO_12_AL                           (12 | BP_ACTIVE_LOW)
-#define BP_GPIO_13_AH                           (13 | BP_ACTIVE_HIGH)
-#define BP_GPIO_13_AL                           (13 | BP_ACTIVE_LOW)
-#define BP_GPIO_14_AH                           (14 | BP_ACTIVE_HIGH)
-#define BP_GPIO_14_AL                           (14 | BP_ACTIVE_LOW)
-#define BP_GPIO_15_AH                           (15 | BP_ACTIVE_HIGH)
-#define BP_GPIO_15_AL                           (15 | BP_ACTIVE_LOW)
-#define BP_GPIO_16_AH                           (16 | BP_ACTIVE_HIGH)
-#define BP_GPIO_16_AL                           (16 | BP_ACTIVE_LOW)
-#define BP_GPIO_17_AH                           (17 | BP_ACTIVE_HIGH)
-#define BP_GPIO_17_AL                           (17 | BP_ACTIVE_LOW)
-#define BP_GPIO_18_AH                           (18 | BP_ACTIVE_HIGH)
-#define BP_GPIO_18_AL                           (18 | BP_ACTIVE_LOW)
-#define BP_GPIO_19_AH                           (19 | BP_ACTIVE_HIGH)
-#define BP_GPIO_19_AL                           (19 | BP_ACTIVE_LOW)
-#define BP_GPIO_20_AH                           (20 | BP_ACTIVE_HIGH)
-#define BP_GPIO_20_AL                           (20 | BP_ACTIVE_LOW)
-#define BP_GPIO_21_AH                           (21 | BP_ACTIVE_HIGH)
-#define BP_GPIO_21_AL                           (21 | BP_ACTIVE_LOW)
-#define BP_GPIO_22_AH                           (22 | BP_ACTIVE_HIGH)
-#define BP_GPIO_22_AL                           (22 | BP_ACTIVE_LOW)
-#define BP_GPIO_23_AH                           (23 | BP_ACTIVE_HIGH)
-#define BP_GPIO_23_AL                           (23 | BP_ACTIVE_LOW)
-#define BP_GPIO_24_AH                           (24 | BP_ACTIVE_HIGH)
-#define BP_GPIO_24_AL                           (24 | BP_ACTIVE_LOW)
-#define BP_GPIO_25_AH                           (25 | BP_ACTIVE_HIGH)
-#define BP_GPIO_25_AL                           (25 | BP_ACTIVE_LOW)
-#define BP_GPIO_26_AH                           (26 | BP_ACTIVE_HIGH)
-#define BP_GPIO_26_AL                           (26 | BP_ACTIVE_LOW)
-#define BP_GPIO_27_AH                           (27 | BP_ACTIVE_HIGH)
-#define BP_GPIO_27_AL                           (27 | BP_ACTIVE_LOW)
-#define BP_GPIO_28_AH                           (28 | BP_ACTIVE_HIGH)
-#define BP_GPIO_28_AL                           (28 | BP_ACTIVE_LOW)
-#define BP_GPIO_29_AH                           (29 | BP_ACTIVE_HIGH)
-#define BP_GPIO_29_AL                           (29 | BP_ACTIVE_LOW)
-#define BP_GPIO_30_AH                           (30 | BP_ACTIVE_HIGH)
-#define BP_GPIO_30_AL                           (30 | BP_ACTIVE_LOW)
-#define BP_GPIO_31_AH                           (31 | BP_ACTIVE_HIGH)
-#define BP_GPIO_31_AL                           (31 | BP_ACTIVE_LOW)
-#define BP_GPIO_32_AH                           (32 | BP_ACTIVE_HIGH)
-#define BP_GPIO_32_AL                           (32 | BP_ACTIVE_LOW)
-#define BP_GPIO_33_AH                           (33 | BP_ACTIVE_HIGH)
-#define BP_GPIO_33_AL                           (33 | BP_ACTIVE_LOW)
-#define BP_GPIO_34_AH                           (34 | BP_ACTIVE_HIGH)
-#define BP_GPIO_34_AL                           (34 | BP_ACTIVE_LOW)
-#define BP_GPIO_35_AH                           (35 | BP_ACTIVE_HIGH)
-#define BP_GPIO_35_AL                           (35 | BP_ACTIVE_LOW)
-#define BP_GPIO_36_AH                           (36 | BP_ACTIVE_HIGH)
-#define BP_GPIO_36_AL                           (36 | BP_ACTIVE_LOW)
-
-/* Values for external interrupt assignments. */
-#define BP_EXT_INTR_0                           0
-#define BP_EXT_INTR_1                           1
-#define BP_EXT_INTR_2                           2
-#define BP_EXT_INTR_3                           3
-
-/* Values for chip select assignments. */
-#define BP_CS_0                                 0
-#define BP_CS_1                                 1
-#define BP_CS_2                                 2
-#define BP_CS_3                                 3
-
-/* Value for GPIO and external interrupt fields that are not used. */
-#define BP_NOT_DEFINED                          0xffff
-#define BP_HW_DEFINED                           0xfff0
-#define BP_UNEQUIPPED                           0xfff1
-
-/* Maximum size of the board id string. */
-#define BP_BOARD_ID_LEN                         16
-
-/* Maximum number of Ethernet MACs. */
-#define BP_MAX_ENET_MACS                        2
-
-/* Maximum number of VoIP DSPs. */
-#define BP_MAX_VOIP_DSP                         2
-
-/* Wireless Antenna Settings. */
-#define BP_WLAN_ANT_MAIN                        0
-#define BP_WLAN_ANT_AUX                         1
-#define BP_WLAN_ANT_BOTH                        3
-
-#if !defined(__ASSEMBLER__)
-
-/* Information about an Ethernet MAC.  If ucPhyType is BP_ENET_NO_PHY,
- * then the other fields are not valid.
- */
-typedef struct EthernetMacInfo
-{
-    unsigned char ucPhyType;                    /* BP_ENET_xxx             */
-    unsigned char ucPhyAddress;                 /* 0 to 31                 */
-    unsigned short usGpioPhySpiSck;             /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiSs;              /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiMosi;            /* GPIO pin or not defined */
-    unsigned short usGpioPhySpiMiso;            /* GPIO pin or not defined */
-    unsigned short usGpioPhyReset;              /* GPIO pin or not defined (96348LV) */
-    unsigned short numSwitchPorts;              /* Number of PHY ports */
-    unsigned short usConfigType;                /* Configuration type */
-    unsigned short usReverseMii;                /* Reverse MII */
-} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO;
-
-
-/* Information about VoIP DSPs.  If ucDspType is BP_VOIP_NO_DSP,
- * then the other fields are not valid.
- */
-typedef struct VoIPDspInfo
-{
-    unsigned char  ucDspType;
-    unsigned char  ucDspAddress;
-    unsigned short usExtIntrVoip;
-    unsigned short usGpioVoipReset;
-    unsigned short usGpioVoipIntr;
-    unsigned short usGpioLedVoip;
-    unsigned short usCsVoip;
-
-} VOIP_DSP_INFO;
-
-
-/**************************************************************************
- * Name       : BpSetBoardId
- *
- * Description: This function find the BOARD_PARAMETERS structure for the
- *              specified board id string and assigns it to a global, static
- *              variable.
- *
- * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_FOUND - Error, board id input string does not
- *                  have a board parameters configuration record.
- ***************************************************************************/
-int BpSetBoardId( char *pszBoardId );
-
-/**************************************************************************
- * Name       : BpGetBoardIds
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id
- *                  strings are returned in.  Each id starts at BP_BOARD_ID_LEN
- *                  boundary.
- *              [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that
- *                  were allocated in pszBoardIds.
- *
- * Returns    : Number of board id strings returned.
- ***************************************************************************/
-int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize );
-
-/**************************************************************************
- * Name       : BpGetEthernetMacInfo
- *
- * Description: This function returns all of the supported board id strings.
- *
- * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO
- *                  buffers.
- *              [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that
- *                  are pointed to by pEnetInfos.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos );
-
-/**************************************************************************
- * Name       : BpGetSdramSize
- *
- * Description: This function returns a constant that describees the board's
- *              SDRAM type and size.
- *
- * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size
- *                  is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetSdramSize( unsigned long *pulSdramSize );
-
-/**************************************************************************
- * Name       : BpGetPsiSize
- *
- * Description: This function returns the persistent storage size in K bytes.
- *
- * Parameters : [OUT] pulPsiSize - Address of short word that the persistent
- *                  storage size is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- ***************************************************************************/
-int BpGetPsiSize( unsigned long *pulPsiSize );
-
-/**************************************************************************
- * Name       : BpGetRj11InnerOuterPairGpios
- *
- * Description: This function returns the GPIO pin assignments for changing
- *              between the RJ11 inner pair and RJ11 outer pair.
- *
- * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair
- *                  GPIO pin is returned in.
- *              [OUT] pusOuter - Address of short word that the RJ11 outer pair
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner,
-    unsigned short *pusOuter );
-
-/**************************************************************************
- * Name       : BpGetPressAndHoldResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the press
- *              and hold reset button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the press and hold
- *                  reset button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPressAndHoldResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP reset
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipIntrGpio
- *
- * Description: This function returns the GPIO pin assignment for VoIP interrupt.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt
- *                  GPIO pin is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPcmciaResetGpio
- *
- * Description: This function returns the GPIO pin assignment for the PCMCIA
- *              Reset operation.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPcmciaResetGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetUartRtsCtsGpios
- *
- * Description: This function returns the GPIO pin assignments for RTS and CTS
- *              UART signals.
- *
- * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO
- *                  pin is returned in.
- *              [OUT] pusCts - Address of short word that the UART CTS GPIO
- *                  pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, values are returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts );
-
-/**************************************************************************
- * Name       : BpGetAdslLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetAdslFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the ADSL
- *              LED that is used when there is a DSL connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the ADSL LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessAntInUse
- *
- * Description: This function returns the antennas in use for wireless
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna
- *                  is in use.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessAntInUse( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesBtnGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Button GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesBtnGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesExtIntr
- *
- * Description: This function returns the external interrupt number for the 
- *              Wireless Ses Button.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  external interrup is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesExtIntr( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessSesLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the Wireless
- *              Ses Led.
- *
- * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses
- *                  Led GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessSesLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetUsbLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the USB
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the USB LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetUsbLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the HPNA
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the HPNA LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWanDataLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the WAN Data
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWanDataLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPppLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetPppFailLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the PPP
- *              LED that is used when there is a PPP connection failure.
- *
- * Parameters : [OUT] pusValue - Address of short word that the PPP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetPppFailLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetVoipLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the VOIP
- *              LED.
- *
- * Parameters : [OUT] pusValue - Address of short word that the VOIP LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderPowerOnLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the power
- *              on LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderAlarmLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the alarm
- *              LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the alarm LED
- *                  GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderResetCfgLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the reset
- *              configuration LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the reset
- *                  configuration LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetBootloaderStopLedGpio
- *
- * Description: This function returns the GPIO pin assignment for the break
- *              into bootloader LED that is set by the bootloader.
- *
- * Parameters : [OUT] pusValue - Address of short word that the break into
- *                  bootloader LED GPIO pin is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetBootloaderStopLedGpio( unsigned short *pusValue );
-
-/**************************************************************************
- * Name       : BpGetWirelessExtIntr
- *
- * Description: This function returns the Wireless external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the wireless
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetWirelessExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetAdslDyingGaspExtIntr
- *
- * Description: This function returns the ADSL Dying Gasp external interrupt
- *              number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetVoipExtIntr
- *
- * Description: This function returns the VOIP external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  external interrupt number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaExtIntr
- *
- * Description: This function returns the HPNA external interrupt number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  external interrupt number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaExtIntr( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetHpnaChipSelect
- *
- * Description: This function returns the HPNA chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the HPNA
- *                  chip select number is returned in.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetHpnaChipSelect( unsigned long *pulValue );
-
-/**************************************************************************
- * Name       : BpGetVoipChipSelect
- *
- * Description: This function returns the VOIP chip select number.
- *
- * Parameters : [OUT] pulValue - Address of short word that the VOIP
- *                  chip select number is returned in.
- *              [IN] dspNum - Address of the DSP to query.
- *
- * Returns    : BP_SUCCESS - Success, value is returned.
- *              BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called.
- *              BP_VALUE_NOT_DEFINED - At least one return value is not defined
- *                  for the board.
- ***************************************************************************/
-int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue );
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* _BOARDPARMS_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h
deleted file mode 100644 (file)
index 3a6e00a..0000000
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6338_INTR_H
-#define __6338_INTR_H
-
-/*=====================================================================*/
-/* BCM6338 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6338 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER               (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI                 (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART                (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_DG                  (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ADSL                (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_ATM                 (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_USBS                (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1               (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY                (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_SDRAM               (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_USB_BULK_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_BULK_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_EMAC1_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_EMAC1_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_SDIO                (INTERNAL_ISR_TABLE_OFFSET + 17)
-
-#endif  /* __BCM6338_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h
deleted file mode 100644 (file)
index 70bf807..0000000
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6338_MAP_H
-#define __BCM6338_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE           0xfffe0000
-#define TIMR_BASE           0xfffe0200 
-#define UART_BASE           0xfffe0300
-#define GPIO_BASE           0xfffe0400
-#define SPI_BASE            0xfffe0c00
-
-typedef struct PerfControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define EMAC_CLK_EN     0x0010
-#define USBS_CLK_EN     0x0010
-#define SAR_CLK_EN      0x0020
-
-#define SPI_CLK_EN      0x0200
-
-  uint32        pll_control;
-#define SOFT_RESET 0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  5
-#define EI_CLEAR_SHFT   10
-#define EI_MASK_SHFT    15
-#define EI_INSENS_SHFT  20
-#define EI_LEVEL_SHFT   25
-
-  uint32        unused[4];      /* (18) */
-  uint32        BlockSoftReset; /* (28) */
-#define BSR_SPI             0x00000001
-#define BSR_EMAC            0x00000004
-#define BSR_USBH            0x00000008
-#define BSR_USBS            0x00000010
-#define BSR_ADSL            0x00000020
-#define BSR_DMAMEM          0x00000040
-#define BSR_SAR             0x00000080
-#define BSR_ACLC            0x00000100
-#define BSR_ADSL_MIPS_PLL   0x00000400
-#define BSR_ALL_BLOCKS      \
-    (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-     BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) 
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define LOOPBK          0x10
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-
-  byte          config;
-#define XMITBREAK       0x40
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-  /* 4-LSBS represent STOP bits/char
-   * in 1/8 bit-time intervals.  Zero
-   * represents 1/8 stop bit interval.
-   * Fifteen represents 2 stop bits.
-   */
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  /* 5-bit TimeoutCnt is in low bits of this register.
-   *  This count represents the number of characters 
-   *  idle times before setting receive Irq when below threshold
-   */
-  uint32        baudword;
-  /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-   */
-
-  byte          txf_levl;       /* Read-only fifo depth */
-  byte          rxf_levl;       /* Read-only fifo depth */
-  byte          fifocfg;        /* Upper 4-bits are TxThresh, Lower are
-                                 *      RxThreshold.  Irq can be asserted
-                                 *      when rx fifo> thresh, txfifo<thresh
-                                 */
-  byte          prog_out;       /* Set value of DTR (Bit0), RTS (Bit1)
-                                 *  if these bits are also enabled to GPIO_o
-                                 */
-#define        DTREN   0x01
-#define        RTSEN   0x02
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;     /* Low 4-bits, set corr bit to 1 to 
-                                         * detect irq on rising AND falling 
-                                         * edges for corresponding GPIO_i
-                                         * if enabled (edge insensitive)
-                                         */
-  byte          DeltaIPConfig_Mask;     /* Upper 4 bits: 1 for posedge sense
-                                         *      0 for negedge sense if
-                                         *      not configured for edge
-                                         *      insensitive (see above)
-                                         * Lower 4 bits: Mask to enable change
-                                         *  detection IRQ for corresponding
-                                         *  GPIO_i
-                                         */
-  byte          DeltaIP_SyncIP;         /* Upper 4 bits show which bits
-                                         *  have changed (may set IRQ).
-                                         *  read automatically clears bit
-                                         * Lower 4 bits are actual status
-                                         */
-
-  uint16        intMask;                               /* Same Bit defs for Mask and status */
-  uint16        intStatus;
-#define DELTAIP         0x0001
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOTHOLD     0x0008
-#define TXREADLATCH     0x0010
-#define TXFIFOEMT       0x0020
-#define RXUNDERR        0x0040
-#define RXOVFERR        0x0080
-#define RXTIMEOUT       0x0100
-#define RXFIFOFULL      0x0200
-#define RXFIFOTHOLD     0x0400
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;                   /* Write to TX, Read from RX */
-                                        /* bits 11:8 are BRK,PAR,FRM errors */
-
-  uint32               unused3;
-  uint32               unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint32        unused0;
-  uint32        GPIODir;      /* bits 7:0 */
-  uint32        unused1;
-  uint32        GPIOio;       /* bits 7:0 */
-  uint32        LEDCtrl;
-#define         LED3_STROBE             0x08000000
-#define         LED2_STROBE             0x04000000
-#define         LED1_STROBE             0x02000000
-#define         LED0_STROBE             0x01000000
-#define         LED_TEST                0x00010000
-#define         LED3_DISABLE_LINK_ACT   0x00008000
-#define         LED2_DISABLE_LINK_ACT   0x00004000
-#define         LED1_DISABLE_LINK_ACT   0x00002000
-#define         LED0_DISABLE_LINK_ACT   0x00001000
-#define         LED_INTERVAL_SET_MASK   0x00000f00
-#define         LED_INTERVAL_SET_320MS  0x00000500
-#define         LED_INTERVAL_SET_160MS  0x00000400
-#define         LED_INTERVAL_SET_80MS   0x00000300
-#define         LED_INTERVAL_SET_40MS   0x00000200
-#define         LED_INTERVAL_SET_20MS   0x00000100
-#define         LED3_ON                 0x00000080
-#define         LED2_ON                 0x00000040
-#define         LED1_ON                 0x00000020
-#define         LED0_ON                 0x00000010
-#define         LED3_ENABLE             0x00000008
-#define         LED2_ENABLE             0x00000004
-#define         LED1_ENABLE             0x00000002
-#define         LED0_ENABLE             0x00000001
-  uint32        SpiSlaveCfg;
-#define         SPI_SLAVE_RESET         0x00010000
-#define         SPI_RESTRICT            0x00000400
-#define         SPI_DELAY_DISABLE       0x00000200
-#define         SPI_PROBE_MUX_SEL_MASK  0x000001e0
-#define         SPI_SER_ADDR_CFG_MASK   0x0000000c
-#define         SPI_MODE                0x00000001
-  uint32        vRegConfig;
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_MAX_BITS_MASK          0x0f
-#define GPIO_NUM_TO_MASK(X)             (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-/*
-** Spi Controller
-*/
-
-typedef struct SpiControl {
-  uint16        spiCmd;                 /* (0x0): SPI command */
-#define SPI_CMD_START_IMMEDIATE         3
-
-#define SPI_CMD_COMMAND_SHIFT           0
-#define SPI_CMD_DEVICE_ID_SHIFT         4
-#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT  8
-
-  byte          spiIntStatus;           /* (0x2): SPI interrupt status */
-  byte          spiMaskIntStatus;       /* (0x3): SPI masked interrupt status */
-
-  byte          spiIntMask;             /* (0x4): SPI interrupt mask */
-#define SPI_INTR_CMD_DONE               0x01
-#define SPI_INTR_CLEAR_ALL              0x1f
-
-  byte          spiStatus;              /* (0x5): SPI status */
-
-  byte          spiClkCfg;              /* (0x6): SPI clock configuration */
-
-  byte          spiFillByte;            /* (0x7): SPI fill byte */
-
-  byte          unused0; 
-  byte          spiMsgTail;             /* (0x9): msgtail */
-  byte          unused1; 
-  byte          spiRxTail;              /* (0xB): rxtail */
-
-  uint32        unused2[13];            /* (0x0c - 0x3c) reserved */
-
-  byte          spiMsgCtl;              /* (0x40) control byte */
-#define HALF_DUPLEX_W                   1
-#define HALF_DUPLEX_R                   2
-#define SPI_MSG_TYPE_SHIFT              6
-#define SPI_BYTE_CNT_SHIFT              0
-  byte          spiMsgData[63];         /* (0x41 - 0x7f) msg data */
-  byte          spiRxDataFifo[64];      /* (0x80 - 0xbf) rx data */
-  byte          unused3[64];            /* (0xc0 - 0xff) reserved */
-} SpiControl;
-
-#define SPI ((volatile SpiControl * const) SPI_BASE)
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
-  uint32        base;                   /* base address in upper 24 bits */
-#define EBI_SIZE_8K         0
-#define EBI_SIZE_16K        1
-#define EBI_SIZE_32K        2
-#define EBI_SIZE_64K        3
-#define EBI_SIZE_128K       4
-#define EBI_SIZE_256K       5
-#define EBI_SIZE_512K       6
-#define EBI_SIZE_1M         7
-#define EBI_SIZE_2M         8
-#define EBI_SIZE_4M         9
-#define EBI_SIZE_8M         10
-#define EBI_SIZE_16M        11
-#define EBI_SIZE_32M        12
-#define EBI_SIZE_64M        13
-#define EBI_SIZE_128M       14
-#define EBI_SIZE_256M       15
-  uint32        config;
-#define EBI_ENABLE          0x00000001      /* .. enable this range */
-#define EBI_WAIT_STATES     0x0000000e      /* .. mask for wait states */
-#define EBI_WTST_SHIFT      1               /* .. for shifting wait states */
-#define EBI_WORD_WIDE       0x00000010      /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN            0x00000020      /* enable posted writes */
-#define EBI_POLARITY        0x00000040      /* .. set to invert something, 
-                                        **    don't know what yet */
-#define EBI_TS_TA_MODE      0x00000080      /* .. use TS/TA mode */
-#define EBI_TS_SEL          0x00000100      /* .. drive tsize, not bs_b */
-#define EBI_FIFO            0x00000200      /* .. use fifo */
-#define EBI_RE              0x00000400      /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
-  EbiChipSelect cs[1];                  /* size chip select configuration */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-
-#endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_intr.h
deleted file mode 100644 (file)
index fb77cbc..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6345_INTR_H
-#define __6345_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6345 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6345 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-#define DMA_ISR_TABLE_OFFSET            (INTERNAL_ISR_TABLE_OFFSET + 13)
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-/* Internal peripheral interrupt IDs */
-#define INTERRUPT_ID_TIMER              (INTERNAL_ISR_TABLE_OFFSET +  0)
-#define INTERRUPT_ID_UART               (INTERNAL_ISR_TABLE_OFFSET +  2)
-#define INTERRUPT_ID_ADSL               (INTERNAL_ISR_TABLE_OFFSET +  3)
-#define INTERRUPT_ID_ATM                (INTERNAL_ISR_TABLE_OFFSET +  4)
-#define INTERRUPT_ID_USB                (INTERNAL_ISR_TABLE_OFFSET +  5)
-#define INTERRUPT_ID_EMAC               (INTERNAL_ISR_TABLE_OFFSET +  8)
-#define INTERRUPT_ID_EPHY               (INTERNAL_ISR_TABLE_OFFSET +  12)
-
-/* DMA channel interrupt IDs */        
-#define INTERRUPT_ID_EMAC_RX_CHAN       (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
-#define INTERRUPT_ID_EMAC_TX_CHAN       (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
-#define INTERRUPT_ID_EBI_RX_CHAN        (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
-#define INTERRUPT_ID_EBI_TX_CHAN        (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
-#define INTERRUPT_ID_RESERVED_RX_CHAN   (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
-#define INTERRUPT_ID_RESERVED_TX_CHAN   (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
-#define INTERRUPT_ID_USB_BULK_RX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
-#define INTERRUPT_ID_USB_BULK_TX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_RX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
-#define INTERRUPT_ID_USB_CNTL_TX_CHAN   (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
-#define INTERRUPT_ID_USB_ISO_RX_CHAN    (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
-#define INTERRUPT_ID_USB_ISO_TX_CHAN    (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
-
-
-#endif  /* __BCM6345_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h
deleted file mode 100644 (file)
index 78e59a4..0000000
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6345_MAP_H
-#define __BCM6345_MAP_H
-
-
-#include "bcmtypes.h"
-#include "6345_intr.h"
-
-typedef struct IntControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define USB_CLK_EN      0x0100
-#define EMAC_CLK_EN     0x0080
-#define UART_CLK_EN     0x0008
-#define CPU_CLK_EN      0x0001
-
-  uint32        pll_control;
-#define SOFT_RESET     0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  4
-#define EI_CLEAR_SHFT   8
-#define EI_MASK_SHFT    12
-#define EI_INSENS_SHFT  16
-#define EI_LEVEL_SHFT   20
-} IntControl;
-
-#define INTC_BASE     0xfffe0000
-#define PERF ((volatile IntControl * const) INTC_BASE)
-
-#define TIMR_BASE     0xfffe0200    
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-  byte          config;
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define XMITBREAK       0x40
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  uint32        baudword;
-
-  byte          txf_levl;
-  byte          rxf_levl;
-  byte          fifocfg;
-  byte          prog_out;
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;
-  byte          DeltaIPConfig_Mask;
-  byte          DeltaIP_SyncIP;
-  uint16        intMask;
-  uint16        intStatus;
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOEMT       0x0020
-#define RXOVFERR        0x0080
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;
-  uint32               unused3;
-  uint32               unused4;
-} Uart;
-
-#define UART_BASE     0xfffe0300
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint16        unused0;
-  byte          unused1;
-  byte          TBusSel;
-
-  uint16        unused2;
-  uint16        GPIODir;
-  byte          unused3;
-  byte          Leds;
-  uint16        GPIOio;
-
-  uint32        UartCtl;
-} GpioControl;
-
-#define GPIO_BASE     0xfffe0400
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-#define GPIO_NUM_MAX_BITS_MASK          0x0f
-#define GPIO_NUM_TO_MASK(X)             (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
-
-
-#endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h
deleted file mode 100644 (file)
index da3ee9f..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __6348_INTR_H
-#define __6348_INTR_H
-
-
-/*=====================================================================*/
-/* BCM6348 External Interrupt Level Assignments                       */
-/*=====================================================================*/
-#define INTERRUPT_ID_EXTERNAL_0         3
-#define INTERRUPT_ID_EXTERNAL_1         4
-#define INTERRUPT_ID_EXTERNAL_2         5
-#define INTERRUPT_ID_EXTERNAL_3         6
-
-/*=====================================================================*/
-/* BCM6348 Timer Interrupt Level Assignments                          */
-/*=====================================================================*/
-#define MIPS_TIMER_INT                  7
-
-/*=====================================================================*/
-/* Peripheral ISR Table Offset                                              */
-/*=====================================================================*/
-#define INTERNAL_ISR_TABLE_OFFSET       8
-
-/*=====================================================================*/
-/* Logical Peripheral Interrupt IDs                                    */
-/*=====================================================================*/
-
-#define INTERRUPT_ID_TIMER               (INTERNAL_ISR_TABLE_OFFSET + 0)
-#define INTERRUPT_ID_SPI                 (INTERNAL_ISR_TABLE_OFFSET + 1)
-#define INTERRUPT_ID_UART                (INTERNAL_ISR_TABLE_OFFSET + 2)
-#define INTERRUPT_ID_ADSL                (INTERNAL_ISR_TABLE_OFFSET + 4)
-#define INTERRUPT_ID_ATM                 (INTERNAL_ISR_TABLE_OFFSET + 5)
-#define INTERRUPT_ID_USBS                (INTERNAL_ISR_TABLE_OFFSET + 6)
-#define INTERRUPT_ID_EMAC2               (INTERNAL_ISR_TABLE_OFFSET + 7)
-#define INTERRUPT_ID_EMAC1               (INTERNAL_ISR_TABLE_OFFSET + 8)
-#define INTERRUPT_ID_EPHY                (INTERNAL_ISR_TABLE_OFFSET + 9)
-#define INTERRUPT_ID_M2M                 (INTERNAL_ISR_TABLE_OFFSET + 10)
-#define INTERRUPT_ID_ACLC                (INTERNAL_ISR_TABLE_OFFSET + 11)
-#define INTERRUPT_ID_USBH                (INTERNAL_ISR_TABLE_OFFSET + 12)
-#define INTERRUPT_ID_SDRAM               (INTERNAL_ISR_TABLE_OFFSET + 13)
-#define INTERRUPT_ID_USB_CNTL_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 14)
-#define INTERRUPT_ID_USB_CNTL_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 15)
-#define INTERRUPT_ID_USB_BULK_RX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 16)
-#define INTERRUPT_ID_USB_BULK_TX_DMA     (INTERNAL_ISR_TABLE_OFFSET + 17)
-#define INTERRUPT_ID_USB_ISO_RX_DMA      (INTERNAL_ISR_TABLE_OFFSET + 18)
-#define INTERRUPT_ID_USB_ISO_TX_DMA      (INTERNAL_ISR_TABLE_OFFSET + 19)
-#define INTERRUPT_ID_EMAC1_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 20)
-#define INTERRUPT_ID_EMAC1_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 21)
-#define INTERRUPT_ID_EMAC2_RX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 22)
-#define INTERRUPT_ID_EMAC2_TX_DMA        (INTERNAL_ISR_TABLE_OFFSET + 23)
-#define INTERRUPT_ID_MPI                 (INTERNAL_ISR_TABLE_OFFSET + 24)
-#define INTERRUPT_ID_DG                  (INTERNAL_ISR_TABLE_OFFSET + 25)
-
-
-#endif  /* __BCM6348_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h
deleted file mode 100644 (file)
index 199ef9e..0000000
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM6348_MAP_H
-#define __BCM6348_MAP_H
-
-#include "bcmtypes.h"
-
-#define PERF_BASE           0xfffe0000
-#define TIMR_BASE           0xfffe0200    
-#define UART_BASE           0xfffe0300
-#define GPIO_BASE           0xfffe0400
-#define MPI_BASE            0xfffe2000    /* MPI control registers */
-#define USB_HOST_BASE       0xfffe1b00    /* USB host registers */
-#define USB_HOST_NON_OHCI   0xfffe1c00    /* USB host non-OHCI registers */
-
-typedef struct PerfControl {
-  uint32        RevID;
-  uint16        testControl;
-  uint16        blkEnables;
-#define EMAC_CLK_EN     0x0010
-#define SAR_CLK_EN      0x0020
-#define USBS_CLK_EN     0x0040
-#define USBH_CLK_EN     0x0100
-
-  uint32        pll_control;
-#define SOFT_RESET 0x00000001
-
-  uint32        IrqMask;
-  uint32        IrqStatus;
-
-  uint32        ExtIrqCfg;
-#define EI_SENSE_SHFT   0
-#define EI_STATUS_SHFT  5
-#define EI_CLEAR_SHFT   10
-#define EI_MASK_SHFT    15
-#define EI_INSENS_SHFT  20
-#define EI_LEVEL_SHFT   25
-
-  uint32        unused[4];      /* (18) */
-  uint32        BlockSoftReset; /* (28) */
-#define BSR_SPI             0x00000001
-#define BSR_EMAC            0x00000004
-#define BSR_USBH            0x00000008
-#define BSR_USBS            0x00000010
-#define BSR_ADSL            0x00000020
-#define BSR_DMAMEM          0x00000040
-#define BSR_SAR             0x00000080
-#define BSR_ACLC            0x00000100
-#define BSR_ADSL_MIPS_PLL   0x00000400
-#define BSR_ALL_BLOCKS      \
-    (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
-     BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) 
-  uint32        unused2[2];     /* (2c) */
-  uint32        PllStrap;       /* (34) */
-#define PLL_N1_SHFT         20
-#define PLL_N1_MASK         (7<<PLL_N1_SHFT)
-#define PLL_N2_SHFT         15
-#define PLL_N2_MASK         (0x1f<<PLL_N2_SHFT)
-#define PLL_M1_REF_SHFT     12
-#define PLL_M1_REF_MASK     (7<<PLL_M1_REF_SHFT)
-#define PLL_M2_REF_SHFT     9
-#define PLL_M2_REF_MASK     (7<<PLL_M2_REF_SHFT)
-#define PLL_M1_CPU_SHFT     6
-#define PLL_M1_CPU_MASK     (7<<PLL_M1_CPU_SHFT)
-#define PLL_M1_BUS_SHFT     3
-#define PLL_M1_BUS_MASK     (7<<PLL_M1_BUS_SHFT)
-#define PLL_M2_BUS_SHFT     0
-#define PLL_M2_BUS_MASK     (7<<PLL_M2_BUS_SHFT)
-} PerfControl;
-
-#define PERF ((volatile PerfControl * const) PERF_BASE)
-
-typedef struct Timer {
-  uint16        unused0;
-  byte          TimerMask;
-#define TIMER0EN        0x01
-#define TIMER1EN        0x02
-#define TIMER2EN        0x04
-  byte          TimerInts;
-#define TIMER0          0x01
-#define TIMER1          0x02
-#define TIMER2          0x04
-#define WATCHDOG        0x08
-  uint32        TimerCtl0;
-  uint32        TimerCtl1;
-  uint32        TimerCtl2;
-#define TIMERENABLE     0x80000000
-#define RSTCNTCLR       0x40000000      
-  uint32        TimerCnt0;
-  uint32        TimerCnt1;
-  uint32        TimerCnt2;
-  uint32        WatchDogDefCount;
-
-  /* Write 0xff00 0x00ff to Start timer
-   * Write 0xee00 0x00ee to Stop and re-load default count
-   * Read from this register returns current watch dog count
-   */
-  uint32        WatchDogCtl;
-
-  /* Number of 40-MHz ticks for WD Reset pulse to last */
-  uint32        WDResetCount;
-} Timer;
-
-#define TIMER ((volatile Timer * const) TIMR_BASE)
-
-typedef struct UartChannel {
-  byte          unused0;
-  byte          control;
-#define BRGEN           0x80    /* Control register bit defs */
-#define TXEN            0x40
-#define RXEN            0x20
-#define LOOPBK          0x10
-#define TXPARITYEN      0x08
-#define TXPARITYEVEN    0x04
-#define RXPARITYEN      0x02
-#define RXPARITYEVEN    0x01
-
-  byte          config;
-#define XMITBREAK       0x40
-#define BITS5SYM        0x00
-#define BITS6SYM        0x10
-#define BITS7SYM        0x20
-#define BITS8SYM        0x30
-#define ONESTOP         0x07
-#define TWOSTOP         0x0f
-  /* 4-LSBS represent STOP bits/char
-   * in 1/8 bit-time intervals.  Zero
-   * represents 1/8 stop bit interval.
-   * Fifteen represents 2 stop bits.
-   */
-  byte          fifoctl;
-#define RSTTXFIFOS      0x80
-#define RSTRXFIFOS      0x40
-  /* 5-bit TimeoutCnt is in low bits of this register.
-   *  This count represents the number of characters 
-   *  idle times before setting receive Irq when below threshold
-   */
-  uint32        baudword;
-  /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
-   */
-
-  byte          txf_levl;       /* Read-only fifo depth */
-  byte          rxf_levl;       /* Read-only fifo depth */
-  byte          fifocfg;        /* Upper 4-bits are TxThresh, Lower are
-                                 *      RxThreshold.  Irq can be asserted
-                                 *      when rx fifo> thresh, txfifo<thresh
-                                 */
-  byte          prog_out;       /* Set value of DTR (Bit0), RTS (Bit1)
-                                 *  if these bits are also enabled to GPIO_o
-                                 */
-#define        DTREN   0x01
-#define        RTSEN   0x02
-
-  byte          unused1;
-  byte          DeltaIPEdgeNoSense;     /* Low 4-bits, set corr bit to 1 to 
-                                         * detect irq on rising AND falling 
-                                         * edges for corresponding GPIO_i
-                                         * if enabled (edge insensitive)
-                                         */
-  byte          DeltaIPConfig_Mask;     /* Upper 4 bits: 1 for posedge sense
-                                         *      0 for negedge sense if
-                                         *      not configured for edge
-                                         *      insensitive (see above)
-                                         * Lower 4 bits: Mask to enable change
-                                         *  detection IRQ for corresponding
-                                         *  GPIO_i
-                                         */
-  byte          DeltaIP_SyncIP;         /* Upper 4 bits show which bits
-                                         *  have changed (may set IRQ).
-                                         *  read automatically clears bit
-                                         * Lower 4 bits are actual status
-                                         */
-
-  uint16        intMask;                               /* Same Bit defs for Mask and status */
-  uint16        intStatus;
-#define DELTAIP         0x0001
-#define TXUNDERR        0x0002
-#define TXOVFERR        0x0004
-#define TXFIFOTHOLD     0x0008
-#define TXREADLATCH     0x0010
-#define TXFIFOEMT       0x0020
-#define RXUNDERR        0x0040
-#define RXOVFERR        0x0080
-#define RXTIMEOUT       0x0100
-#define RXFIFOFULL      0x0200
-#define RXFIFOTHOLD     0x0400
-#define RXFIFONE        0x0800
-#define RXFRAMERR       0x1000
-#define RXPARERR        0x2000
-#define RXBRK           0x4000
-
-  uint16        unused2;
-  uint16        Data;                   /* Write to TX, Read from RX */
-                                        /* bits 11:8 are BRK,PAR,FRM errors */
-
-  uint32               unused3;
-  uint32               unused4;
-} Uart;
-
-#define UART ((volatile Uart * const) UART_BASE)
-
-typedef struct GpioControl {
-  uint32        GPIODir_high; /* bits 36:32 */
-  uint32        GPIODir;      /* bits 31:00 */
-  uint32        GPIOio_high;  /* bits 36:32 */
-  uint32        GPIOio;       /* bits 31:00 */
-  uint32        LEDCtrl;
-#define         LED3_STROBE             0x08000000
-#define         LED2_STROBE             0x04000000
-#define         LED1_STROBE             0x02000000
-#define         LED0_STROBE             0x01000000
-#define         LED_TEST                0x00010000
-#define         LED3_DISABLE_LINK_ACT   0x00008000
-#define         LED2_DISABLE_LINK_ACT   0x00004000
-#define         LED1_DISABLE_LINK_ACT   0x00002000
-#define         LED0_DISABLE_LINK_ACT   0x00001000
-#define         LED_INTERVAL_SET_MASK   0x00000f00
-#define         LED_INTERVAL_SET_320MS  0x00000500
-#define         LED_INTERVAL_SET_160MS  0x00000400
-#define         LED_INTERVAL_SET_80MS   0x00000300
-#define         LED_INTERVAL_SET_40MS   0x00000200
-#define         LED_INTERVAL_SET_20MS   0x00000100
-#define         LED3_ON                 0x00000080
-#define         LED2_ON                 0x00000040
-#define         LED1_ON                 0x00000020
-#define         LED0_ON                 0x00000010
-#define         LED3_ENABLE             0x00000008
-#define         LED2_ENABLE             0x00000004
-#define         LED1_ENABLE             0x00000002
-#define         LED0_ENABLE             0x00000001
-  uint32        SpiSlaveCfg;
-#define         SPI_SLAVE_RESET         0x00010000
-#define         SPI_RESTRICT            0x00000400
-#define         SPI_DELAY_DISABLE       0x00000200
-#define         SPI_PROBE_MUX_SEL_MASK  0x000001e0
-#define         SPI_SER_ADDR_CFG_MASK   0x0000000c
-#define         SPI_MODE                0x00000001
-  uint32        GPIOMode;
-#define         GROUP4_DIAG             0x00090000
-#define         GROUP4_UTOPIA           0x00080000
-#define         GROUP4_LEGACY_LED       0x00030000
-#define         GROUP4_MII_SNOOP        0x00020000
-#define         GROUP4_EXT_EPHY         0x00010000
-#define         GROUP3_DIAG             0x00009000
-#define         GROUP3_UTOPIA           0x00008000
-#define         GROUP3_EXT_MII          0x00007000
-#define         GROUP2_DIAG             0x00000900
-#define         GROUP2_PCI              0x00000500
-#define         GROUP1_DIAG             0x00000090
-#define         GROUP1_UTOPIA           0x00000080
-#define         GROUP1_SPI_UART         0x00000060
-#define         GROUP1_SPI_MASTER       0x00000060
-#define         GROUP1_MII_PCCARD       0x00000040
-#define         GROUP1_MII_SNOOP        0x00000020
-#define         GROUP1_EXT_EPHY         0x00000010
-#define         GROUP0_DIAG             0x00000009
-#define         GROUP0_EXT_MII          0x00000007
-
-} GpioControl;
-
-#define GPIO ((volatile GpioControl * const) GPIO_BASE)
-
-/* Number to mask conversion macro used for GPIODir and GPIOio */
-#define GPIO_NUM_TOTAL_BITS_MASK        0x3f
-#define GPIO_NUM_MAX_BITS_MASK          0x1f
-#define GPIO_NUM_TO_MASK(X)             ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
-
-/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
-#define GPIO_NUM_MAX_BITS_MASK_HIGH     0x07
-#define GPIO_NUM_TO_MASK_HIGH(X)        ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
-
-
-/*
-** External Bus Interface
-*/
-typedef struct EbiChipSelect {
-  uint32        base;                   /* base address in upper 24 bits */
-#define EBI_SIZE_8K         0
-#define EBI_SIZE_16K        1
-#define EBI_SIZE_32K        2
-#define EBI_SIZE_64K        3
-#define EBI_SIZE_128K       4
-#define EBI_SIZE_256K       5
-#define EBI_SIZE_512K       6
-#define EBI_SIZE_1M         7
-#define EBI_SIZE_2M         8
-#define EBI_SIZE_4M         9
-#define EBI_SIZE_8M         10
-#define EBI_SIZE_16M        11
-#define EBI_SIZE_32M        12
-#define EBI_SIZE_64M        13
-#define EBI_SIZE_128M       14
-#define EBI_SIZE_256M       15
-  uint32        config;
-#define EBI_ENABLE          0x00000001      /* .. enable this range */
-#define EBI_WAIT_STATES     0x0000000e      /* .. mask for wait states */
-#define EBI_WTST_SHIFT      1               /* .. for shifting wait states */
-#define EBI_WORD_WIDE       0x00000010      /* .. 16-bit peripheral, else 8 */
-#define EBI_WREN            0x00000020      /* enable posted writes */
-#define EBI_POLARITY        0x00000040      /* .. set to invert something, 
-                                        **    don't know what yet */
-#define EBI_TS_TA_MODE      0x00000080      /* .. use TS/TA mode */
-#define EBI_TS_SEL          0x00000100      /* .. drive tsize, not bs_b */
-#define EBI_FIFO            0x00000200      /* .. use fifo */
-#define EBI_RE              0x00000400      /* .. Reverse Endian */
-} EbiChipSelect;
-
-typedef struct MpiRegisters {
-  EbiChipSelect cs[7];                  /* size chip select configuration */
-#define EBI_CS0_BASE            0
-#define EBI_CS1_BASE            1
-#define EBI_CS2_BASE            2
-#define EBI_CS3_BASE            3
-#define PCMCIA_COMMON_BASE      4
-#define PCMCIA_ATTRIBUTE_BASE   5
-#define PCMCIA_IO_BASE          6
-  uint32        unused0[2];             /* reserved */
-  uint32        ebi_control;            /* ebi control */
-  uint32        unused1[4];             /* reserved */
-#define EBI_ACCESS_TIMEOUT      0x000007FF
-  uint32        pcmcia_cntl1;           /* pcmcia control 1 */
-#define PCCARD_CARD_RESET       0x00040000
-#define CARDBUS_ENABLE          0x00008000
-#define PCMCIA_ENABLE           0x00004000
-#define PCMCIA_GPIO_ENABLE      0x00002000
-#define CARDBUS_IDSEL           0x00001F00
-#define VS2_OEN                 0x00000080
-#define VS1_OEN                 0x00000040
-#define VS2_OUT                 0x00000020
-#define VS1_OUT                 0x00000010
-#define VS2_IN                  0x00000008
-#define VS1_IN                  0x00000004
-#define CD2_IN                  0x00000002
-#define CD1_IN                  0x00000001
-#define VS_MASK                 0x0000000C
-#define CD_MASK                 0x00000003
-  uint32        unused2;                /* reserved */
-  uint32        pcmcia_cntl2;           /* pcmcia control 2 */
-#define PCMCIA_BYTESWAP_DIS     0x00000002
-#define PCMCIA_HALFWORD_EN      0x00000001
-#define RW_ACTIVE_CNT_BIT       2
-#define INACTIVE_CNT_BIT        8
-#define CE_SETUP_CNT_BIT        16
-#define CE_HOLD_CNT_BIT         24
-  uint32        unused3[40];            /* reserved */
-
-  uint32        sp0range;               /* PCI to internal system bus address space */
-  uint32        sp0remap;
-  uint32        sp0cfg;
-  uint32        sp1range;
-  uint32        sp1remap;
-  uint32        sp1cfg;
-
-  uint32        EndianCfg;
-
-  uint32        l2pcfgctl;              /* internal system bus to PCI IO/Cfg control */
-#define DIR_CFG_SEL             0x80000000 /* change from PCI I/O access to PCI config access */
-#define DIR_CFG_USEREG          0x40000000 /* use this register info for PCI configuration access */
-#define DEVICE_NUMBER           0x00007C00 /* device number for the PCI configuration access */
-#define FUNC_NUMBER             0x00000300 /* function number for the PCI configuration access */
-#define REG_NUMBER              0x000000FC /* register number for the PCI configuration access */
-#define CONFIG_TYPE             0x00000003 /* configuration type for the PCI configuration access */
-
-  uint32        l2pmrange1;             /* internal system bus to PCI memory space */
-#define PCI_SIZE_64K            0xFFFF0000
-#define PCI_SIZE_128K           0xFFFE0000
-#define PCI_SIZE_256K           0xFFFC0000
-#define PCI_SIZE_512K           0xFFF80000
-#define PCI_SIZE_1M             0xFFF00000
-#define PCI_SIZE_2M             0xFFE00000
-#define PCI_SIZE_4M             0xFFC00000
-#define PCI_SIZE_8M             0xFF800000
-#define PCI_SIZE_16M            0xFF000000
-#define PCI_SIZE_32M            0xFE000000
-  uint32        l2pmbase1;              /* kseg0 or kseg1 address & 0x1FFFFFFF */
-  uint32        l2pmremap1;
-#define CARDBUS_MEM             0x00000004
-#define MEM_WINDOW_EN           0x00000001
-  uint32        l2pmrange2;
-  uint32        l2pmbase2;
-  uint32        l2pmremap2;
-  uint32        l2piorange;             /* internal system bus to PCI I/O space */
-  uint32        l2piobase;
-  uint32        l2pioremap;
-
-  uint32        pcimodesel;
-#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
-#define PCI_BAR2_NOSWAP         0x00000002 /* BAR at offset 0x20 */
-#define PCI_BAR1_NOSWAP         0x00000001 /* BAR at affset 0x1c */
-
-  uint32        pciintstat;             /* PCI interrupt mask/status */
-#define MAILBOX1_SENT           0x08
-#define MAILBOX0_SENT           0x04
-#define MAILBOX1_MSG_RCV        0x02
-#define MAILBOX0_MSG_RCV        0x01
-  uint32        locbuscntrl;            /* internal system bus control */
-#define DIR_U2P_NOSWAP          0x00000002
-#define EN_PCI_GPIO             0x00000001
-  uint32        locintstat;             /* internal system bus interrupt mask/status */
-#define CSERR                   0x0200
-#define SERR                    0x0100
-#define EXT_PCI_INT             0x0080
-#define DIR_FAILED              0x0040
-#define DIR_COMPLETE            0x0020
-#define PCI_CFG                 0x0010
-  uint32        unused5[7];
-
-  uint32        mailbox0;
-  uint32        mailbox1;
-
-  uint32        pcicfgcntrl;            /* internal system bus PCI configuration control */
-#define PCI_CFG_REG_WRITE_EN    0x00000080
-#define PCI_CFG_ADDR            0x0000003C
-  uint32        pcicfgdata;             /* internal system bus PCI configuration data */
-
-  uint32        locch2ctl;              /* PCI to interrnal system bus DMA (downstream) local control */
-#define MPI_DMA_HALT            0x00000008  /* idle after finish current memory burst */
-#define MPI_DMA_PKT_HALT        0x00000004  /* idle after an EOP flag is detected */
-#define MPI_DMA_STALL           0x00000002  /* idle after an EOP flag is detected */
-#define MPI_DMA_ENABLE          0x00000001  /* set to enable channel */
-  uint32        locch2intStat;
-#define MPI_DMA_NO_DESC         0x00000004  /* no valid descriptors */
-#define MPI_DMA_DONE            0x00000002  /* packet xfer complete */
-#define MPI_DMA_BUFF_DONE       0x00000001  /* buffer done */
-  uint32        locch2intMask;
-  uint32        unused6;
-  uint32        locch2descaddr;
-  uint32        locch2status1;
-#define LOCAL_DESC_STATE        0xE0000000
-#define PCI_DESC_STATE          0x1C000000
-#define BYTE_DONE               0x03FFC000
-#define RING_ADDR               0x00003FFF
-  uint32        locch2status2;
-#define BUFPTR_OFFSET           0x1FFF0000
-#define PCI_MASTER_STATE        0x000000C0
-#define LOC_MASTER_STATE        0x00000038
-#define CONTROL_STATE           0x00000007
-  uint32        unused7;
-
-  uint32        locch1Ctl;              /*internal system bus to PCI DMA (upstream) local control */
-#define DMA_U2P_LE              0x00000200  /* local bus is little endian */
-#define DMA_U2P_NOSWAP          0x00000100  /* lccal bus is little endian but no data swapped */
-  uint32        locch1intstat;
-  uint32        locch1intmask;
-  uint32        unused8;
-  uint32        locch1descaddr;
-  uint32        locch1status1;
-  uint32        locch1status2;
-  uint32        unused9;
-
-  uint32        pcich1ctl;              /* internal system bus to PCI DMA PCI control */
-  uint32        pcich1intstat;
-  uint32        pcich1intmask;
-  uint32        pcich1descaddr;
-  uint32        pcich1status1;
-  uint32        pcich1status2;
-
-  uint32        pcich2Ctl;              /* PCI to internal system bus DMA PCI control */
-  uint32        pcich2intstat;
-  uint32        pcich2intmask;
-  uint32        pcich2descaddr;
-  uint32        pcich2status1;
-  uint32        pcich2status2;
-
-  uint32        perm_id;                /* permanent device and vendor id */
-  uint32        perm_rev;               /* permanent revision id */
-} MpiRegisters;
-
-#define MPI ((volatile MpiRegisters * const) MPI_BASE)
-
-/* PCI configuration address space start offset 0x40 */
-#define BRCM_PCI_CONFIG_TIMER               0x40
-#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK       0x0000FF00
-#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK                0x000000FF
-
-/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
-#define NON_OHCI_ENABLE_PORT1   0x00000001 /* Use USB port 1 for host, not dev */
-#define NON_OHCI_BYTE_SWAP      0x00000008 /* Swap USB host registers */
-
-#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
-
-#endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h
deleted file mode 100644 (file)
index e902e96..0000000
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-//**************************************************************************************
-// File Name  : bcmTag.h
-//
-// Description: add tag with validation system to the firmware image file to be uploaded
-//              via http
-//
-// Created    : 02/28/2002  seanl
-//**************************************************************************************
-
-#ifndef _BCMTAG_H_
-#define _BCMTAG_H_
-
-
-#define BCM_SIG_1   "Broadcom Corporation"
-#define BCM_SIG_2   "ver. 2.0"          // was "firmware version 2.0" now it is split 6 char out for chip id.
-
-#define BCM_TAG_VER         "6"
-#define BCM_TAG_VER_LAST    "26"
-
-// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
-#define TAG_LEN         256
-#define TAG_VER_LEN     4
-#define SIG_LEN         20
-#define SIG_LEN_2       14   // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
-#define CHIP_ID_LEN            6       
-#define IMAGE_LEN       10
-#define ADDRESS_LEN     12
-#define FLAG_LEN        2
-#define TOKEN_LEN       20
-#define BOARD_ID_LEN    16
-#define RESERVED_LEN    (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
-                        (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
-
-
-// TAG for downloadable image (kernel plus file system)
-typedef struct _FILE_TAG
-{
-    unsigned char tagVersion[TAG_VER_LEN];       // tag version.  Will be 2 here.
-    unsigned char signiture_1[SIG_LEN];          // text line for company info
-    unsigned char signiture_2[SIG_LEN_2];        // additional info (can be version number)
-    unsigned char chipId[CHIP_ID_LEN];                  // chip id 
-    unsigned char boardId[BOARD_ID_LEN];         // board id
-    unsigned char bigEndian[FLAG_LEN];           // if = 1 - big, = 0 - little endia of the host
-    unsigned char totalImageLen[IMAGE_LEN];      // the sum of all the following length
-    unsigned char cfeAddress[ADDRESS_LEN];       // if non zero, cfe starting address
-    unsigned char cfeLen[IMAGE_LEN];             // if non zero, cfe size in clear ASCII text.
-    unsigned char rootfsAddress[ADDRESS_LEN];    // if non zero, filesystem starting address
-    unsigned char rootfsLen[IMAGE_LEN];          // if non zero, filesystem size in clear ASCII text.
-    unsigned char kernelAddress[ADDRESS_LEN];    // if non zero, kernel starting address
-    unsigned char kernelLen[IMAGE_LEN];          // if non zero, kernel size in clear ASCII text.
-    unsigned char dualImage[FLAG_LEN];           // if 1, dual image
-    unsigned char inactiveLen[FLAG_LEN];         // if 1, the image is INACTIVE; if 0, active 
-    unsigned char reserved[RESERVED_LEN];        // reserved for later use
-    unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha;  for
-                                                 // now will be 4 unsigned char crc
-    unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
-} FILE_TAG, *PFILE_TAG;
-
-#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-#define CRC_LEN 4
-
-// only included if for bcmTag.exe program
-#ifdef BCMTAG_EXE_USE
-
-static unsigned long Crc32_table[256] = {
-    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-};
-#endif // BCMTAG_USE
-
-
-#endif // _BCMTAG_H_
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h
deleted file mode 100644 (file)
index 8c56840..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2003 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM_INTR_H
-#define __BCM_INTR_H
-
-#ifdef __cplusplus
-    extern "C" {
-#endif
-
-#if defined(CONFIG_BCM96338)
-#include <6338_intr.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_intr.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_intr.h>
-#endif
-
-/* defines */
-struct pt_regs;
-typedef int (*FN_HANDLER) (int, void *);
-
-/* prototypes */
-extern void enable_brcm_irq(unsigned int irq);
-extern void disable_brcm_irq(unsigned int irq);
-extern int request_external_irq(unsigned int irq,
-    FN_HANDLER handler, unsigned long irqflags, 
-    const char * devname, void *dev_id);
-extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
-    unsigned int interruptId);
-extern void dump_intr_regs(void);
-
-/* compatibility definitions */
-#define BcmHalInterruptEnable(irq)      enable_brcm_irq( irq )
-#define BcmHalInterruptDisable(irq)     disable_brcm_irq( irq )
-
-#ifdef __cplusplus
-    }
-#endif
-
-#endif
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h
deleted file mode 100644 (file)
index ccfe965..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-#ifndef __BCM_MAP_PART_H
-#define __BCM_MAP_PART_H
-
-#if defined(CONFIG_BCM96338)
-#include <6338_map_part.h>
-#endif
-#if defined(CONFIG_BCM96345)
-#include <6345_map_part.h>
-#endif
-#if defined(CONFIG_BCM96348)
-#include <6348_map_part.h>
-#endif
-
-#endif
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h
deleted file mode 100644 (file)
index cecbd99..0000000
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2004 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-//
-// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
-//
-#ifndef BCMPCI_H
-#define BCMPCI_H
-
-/* Memory window in internal system bus address space */ 
-#define BCM_PCI_MEM_BASE        0x08000000
-/* IO window in internal system bus address space */ 
-#define BCM_PCI_IO_BASE         0x0C000000
-
-#define BCM_PCI_ADDR_MASK       0x1fffffff
-
-/* Memory window size (range) */
-#define BCM_PCI_MEM_SIZE_16MB   0x01000000
-/* IO window size (range) */
-#define BCM_PCI_IO_SIZE_64KB    0x00010000
-
-/* PCI Configuration and I/O space acesss */
-#define BCM_PCI_CFG(d, f, o)    ( (d << 11) | (f << 8) | (o/4 << 2) )
-
-/* fake USB PCI slot */
-#define USB_HOST_SLOT           9
-#define USB_BAR0_MEM_SIZE       0x0800
-
-#define BCM_HOST_MEM_SPACE1     0x10000000
-#define BCM_HOST_MEM_SPACE2     0x00000000
-
-/* 
- * EBI bus clock is 33MHz and share with PCI bus
- * each clock cycle is 30ns.
- */
-/* attribute memory access wait cnt for 4306 */
-#define PCMCIA_ATTR_CE_HOLD     3  // data hold time 70ns
-#define PCMCIA_ATTR_CE_SETUP    3  // data setup time 50ns
-#define PCMCIA_ATTR_INACTIVE    6  // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_ATTR_ACTIVE      10 // OE/WE pulse width 300ns
-
-/* common memory access wait cnt for 4306 */
-#define PCMCIA_MEM_CE_HOLD      1  // data hold time 30ns
-#define PCMCIA_MEM_CE_SETUP     1  // data setup time 30ns
-#define PCMCIA_MEM_INACTIVE     2  // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
-#define PCMCIA_MEM_ACTIVE       5  // OE/WE pulse width 150ns
-
-#define PCCARD_VCC_MASK     0x00070000  // Mask Reset also
-#define PCCARD_VCC_33V      0x00010000
-#define PCCARD_VCC_50V      0x00020000
-
-typedef enum {
-    MPI_CARDTYPE_NONE,      // No Card in slot
-    MPI_CARDTYPE_PCMCIA,    // 16-bit PCMCIA card in slot    
-    MPI_CARDTYPE_CARDBUS,   // 32-bit CardBus card in slot
-}   CardType;
-
-#define CARDBUS_SLOT        0    // Slot 0 is default for CardBus
-
-#define pcmciaAttrOffset    0x00200000
-#define pcmciaMemOffset     0x00000000
-// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. 
-#define pcmciaIoOffset      (BCM_PCI_IO_BASE + 0x80000)
-// Base Address is that mapped into the MPI ChipSelect registers. 
-// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
-#define pcmciaBase          0xbf000000
-#define pcmciaAttr          (pcmciaAttrOffset | pcmciaBase)
-#define pcmciaMem           (pcmciaMemOffset  | pcmciaBase)
-#define pcmciaIo            (pcmciaIoOffset   | pcmciaBase)
-
-#endif
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h
deleted file mode 100644 (file)
index 43aebc9..0000000
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-
-//
-// bcmtypes.h - misc useful typedefs
-//
-#ifndef BCMTYPES_H
-#define BCMTYPES_H
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-
-#ifndef _TYPEDEFS_H_
-typedef unsigned char   uint8;
-typedef unsigned short  uint16;
-typedef unsigned long   uint32;
-typedef signed char     int8;
-typedef signed short    int16;
-typedef signed long     int32;
-#endif
-
-typedef unsigned char   byte;
-// typedef unsigned long   sem_t;
-
-typedef unsigned long   HANDLE,*PULONG,DWORD,*PDWORD;
-typedef signed long     LONG,*PLONG;
-
-typedef unsigned int    *PUINT;
-typedef signed int      INT;
-
-typedef unsigned short  *PUSHORT;
-typedef signed short    SHORT,*PSHORT;
-typedef unsigned short  WORD,*PWORD;
-
-typedef unsigned char   *PUCHAR;
-typedef signed char     *PCHAR;
-
-typedef void            *PVOID;
-
-typedef unsigned char   BOOLEAN, *PBOOL, *PBOOLEAN;
-
-typedef unsigned char   BYTE,*PBYTE;
-
-//#ifndef __GNUC__
-//The following has been defined in Vxworks internally: vxTypesOld.h
-//redefine under vxworks will cause error
-typedef signed int      *PINT;
-
-typedef signed char     INT8;
-typedef signed short    INT16;
-typedef signed long     INT32;
-
-typedef unsigned char   UINT8;
-typedef unsigned short  UINT16;
-typedef unsigned long   UINT32;
-
-typedef unsigned char   UCHAR;
-typedef unsigned short  USHORT;
-typedef unsigned int    UINT;
-typedef unsigned long   ULONG;
-
-typedef void            VOID;
-typedef unsigned char   BOOL;
-
-//#endif  /* __GNUC__ */
-
-
-// These are also defined in typedefs.h in the application area, so I need to
-// protect against re-definition.
-#ifndef TYPEDEFS_H
-
-// Maximum and minimum values for a signed 16 bit integer.
-#define MAX_INT16 32767
-#define MIN_INT16 -32768
-
-// Useful for true/false return values.  This uses the
-// Taligent notation (k for constant).
-typedef enum
-{
-    kFalse = 0,
-    kTrue = 1
-} Bool;
-
-#endif
-
-/* macros to protect against unaligned accesses */
-
-#if 0
-/* first arg is an address, second is a value */
-#define PUT16( a, d ) {                \
-  *((byte *)a) = (byte)((d)>>8);       \
-  *(((byte *)a)+1) = (byte)(d);        \
-}
-
-#define PUT32( a, d ) {                \
-  *((byte *)a) = (byte)((d)>>24);      \
-  *(((byte *)a)+1) = (byte)((d)>>16);  \
-  *(((byte *)a)+2) = (byte)((d)>>8);   \
-  *(((byte *)a)+3) = (byte)(d);        \
-}
-
-/* first arg is an address, returns a value */
-#define GET16( a ) (                   \
-  (*((byte *)a) << 8) |                        \
-  (*(((byte *)a)+1))                   \
-)
-
-#define GET32( a ) (                   \
-  (*((byte *)a) << 24)     |           \
-  (*(((byte *)a)+1) << 16) |           \
-  (*(((byte *)a)+2) << 8)  |           \
-  (*(((byte *)a)+3))                   \
-)
-#endif
-
-#ifndef YES
-#define YES 1
-#endif
-
-#ifndef NO
-#define NO  0
-#endif
-
-#ifndef IN
-#define IN
-#endif
-
-#ifndef OUT
-#define OUT
-#endif
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE  0
-#endif
-
-#define READ32(addr)        (*(volatile UINT32 *)((ULONG)&addr))
-#define READ16(addr)        (*(volatile UINT16 *)((ULONG)&addr))
-#define READ8(addr)         (*(volatile UINT8  *)((ULONG)&addr))
-
-#endif
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h
deleted file mode 100644 (file)
index e674cb1..0000000
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
-<:copyright-gpl 
- Copyright 2002 Broadcom Corp. All Rights Reserved. 
- This program is free software; you can distribute it and/or modify it 
- under the terms of the GNU General Public License (Version 2) as 
- published by the Free Software Foundation. 
- This program is distributed in the hope it will be useful, but WITHOUT 
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
- FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
- for more details. 
- You should have received a copy of the GNU General Public License along 
- with this program; if not, write to the Free Software Foundation, Inc., 
- 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. 
-:>
-*/
-/***********************************************************************/
-/*                                                                     */
-/*   MODULE:  board.h                                                  */
-/*   DATE:    97/02/18                                                 */
-/*   PURPOSE: Board specific information.  This module should include  */
-/*            all base device addresses and board specific macros.     */
-/*                                                                     */
-/***********************************************************************/
-#ifndef _BOARD_H
-#define _BOARD_H
-
-/*****************************************************************************/
-/*                    Misc board definitions                                 */
-/*****************************************************************************/
-
-#define        DYING_GASP_API
-
-/*****************************************************************************/
-/*                    Physical Memory Map                                    */
-/*****************************************************************************/
-
-#define PHYS_DRAM_BASE           0x00000000     /* Dynamic RAM Base */
-#define PHYS_FLASH_BASE          0x1FC00000     /* Flash Memory         */
-
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs    */
-/* have to use converted addresses defined below:                            */
-/*****************************************************************************/
-#define DRAM_BASE           (0x80000000 | PHYS_DRAM_BASE)   /* cached DRAM */
-#define DRAM_BASE_NOCACHE   (0xA0000000 | PHYS_DRAM_BASE)   /* uncached DRAM */
-#define FLASH_BASE          (0xA0000000 | PHYS_FLASH_BASE)  /* uncached Flash  */
-
-/*****************************************************************************/
-/*  Select the PLL value to get the desired CPU clock frequency.             */
-/*                                                                           */
-/*                                                                           */
-/*****************************************************************************/
-#define FPERIPH            50000000
-
-#define ONEK                            1024
-#define BLK64K                          (64*ONEK)
-#define FLASH45_BLKS_BOOT_ROM           1
-#define FLASH45_LENGTH_BOOT_ROM         (FLASH45_BLKS_BOOT_ROM * BLK64K)
-#define FLASH_RESERVED_AT_END           (64*ONEK) /*reserved for PSI, scratch pad*/
-    
-/*****************************************************************************/
-/* Note that the addresses above are physical addresses and that programs    */
-/* have to use converted addresses defined below:                            */
-/*****************************************************************************/
-#define DRAM_BASE           (0x80000000 | PHYS_DRAM_BASE)   /* cached DRAM */
-#define DRAM_BASE_NOCACHE   (0xA0000000 | PHYS_DRAM_BASE)   /* uncached DRAM */
-#define FLASH_BASE          (0xA0000000 | PHYS_FLASH_BASE)  /* uncached Flash  */
-
-/*****************************************************************************/
-/*  Select the PLL value to get the desired CPU clock frequency.             */
-/*                                                                           */
-/*                                                                           */
-/*****************************************************************************/
-#define FPERIPH            50000000
-    
-#define SDRAM_TYPE_ADDRESS_OFFSET   16
-#define NVRAM_DATA_OFFSET           0x0580
-#define NVRAM_DATA_ID               0x0f1e2d3c
-#define BOARD_SDRAM_TYPE            *(unsigned long *) \
-                                    (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
-
-#define ONEK                1024
-#define BLK64K              (64*ONEK)
-
-// nvram and psi flash definitions for 45
-#define FLASH45_LENGTH_NVRAM            ONEK            // 1k nvram 
-#define NVRAM_PSI_DEFAULT               24              // default psi in K byes
-
-/*****************************************************************************/
-/*       NVRAM Offset and definition                                         */
-/*****************************************************************************/
-
-#define NVRAM_VERSION_NUMBER            2
-#define NVRAM_VERSION_NUMBER_ADDRESS    0
-
-#define NVRAM_BOOTLINE_LEN              256
-#define NVRAM_BOARD_ID_STRING_LEN       16
-#define NVRAM_MAC_ADDRESS_LEN           6
-#define NVRAM_MAC_COUNT_MAX             32
-
-/*****************************************************************************/
-/*       Misc Offsets                                                        */
-/*****************************************************************************/
-
-#define CFE_VERSION_OFFSET           0x0570
-#define CFE_VERSION_MARK_SIZE        5
-#define CFE_VERSION_SIZE             5
-
-typedef struct
-{
-    unsigned long ulVersion;
-    char szBootline[NVRAM_BOOTLINE_LEN];
-    char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
-    unsigned long ulReserved1[2];
-    unsigned long ulNumMacAddrs;
-    unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
-    char chReserved[2];
-    unsigned long ulCheckSum;
-} NVRAM_DATA, *PNVRAM_DATA;
-
-
-/*****************************************************************************/
-/*          board ioctl calls for flash, led and some other utilities        */
-/*****************************************************************************/
-
-
-/* Defines. for board driver */
-#define BOARD_IOCTL_MAGIC       'B'
-#define BOARD_DRV_MAJOR          206
-
-#define MAC_ADDRESS_ANY         (unsigned long) -1
-
-#define BOARD_IOCTL_FLASH_INIT \
-    _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_WRITE \
-    _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_FLASH_READ \
-    _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NR_PAGES \
-    _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_DUMP_ADDR \
-    _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MEMORY \
-    _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_MIPS_SOFT_RESET \
-    _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_LED_CTRL \
-    _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ID \
-    _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_PSI_SIZE \
-    _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_SDRAM_SIZE \
-    _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_MONITOR_FD \
-    _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
-    
-#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
-    _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BOOTLINE \
-    _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_SET_BOOTLINE \
-    _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
-    _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CHIP_ID \
-    _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_NUM_ENET \
-    _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_CFE_VER \
-    _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_ENET_CFG \
-    _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
-
-#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
-    _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
-    
-#define BOARD_IOCTL_SET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)        
-
-#define BOARD_IOCTL_GET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)        
-
-#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
-    _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) 
-
-#define BOARD_IOCTL_SET_SES_LED \
-    _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
-
-//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
-#define RESET_BUTTON_UP           1
-#define RESET_BUTTON_PRESSDOWN    0
-#define BOARD_IOCTL_GET_RESETHOLD \
-    _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
-//>>JUNHON, 2004/09/15    
-    
-// for the action in BOARD_IOCTL_PARMS for flash operation
-typedef enum 
-{
-    PERSISTENT,
-    NVRAM,
-    BCM_IMAGE_CFE,
-    BCM_IMAGE_FS,
-    BCM_IMAGE_KERNEL,
-    BCM_IMAGE_WHOLE,
-    SCRATCH_PAD,
-    FLASH_SIZE,
-} BOARD_IOCTL_ACTION;
-    
-    
-typedef struct boardIoctParms
-{
-    char *string;
-    char *buf;
-    int strLen;
-    int offset;
-    BOARD_IOCTL_ACTION  action;        /* flash read/write: nvram, persistent, bcm image */
-    int result;
-} BOARD_IOCTL_PARMS;
-
-
-// LED defines 
-typedef enum
-{   
-    kLedAdsl,
-    kLedWireless,
-    kLedUsb,
-    kLedHpna,
-    kLedWanData,
-    kLedPPP,
-    kLedVoip,
-    kLedSes,
-    kLedLan,
-    kLedSelfTest,
-    kLedEnd,                // NOTE: Insert the new led name before this one.  Alway stay at the end.
-} BOARD_LED_NAME;
-
-typedef enum
-{
-    kLedStateOff,                        /* turn led off */
-    kLedStateOn,                         /* turn led on */
-    kLedStateFail,                       /* turn led on red */
-    kLedStateBlinkOnce,                  /* blink once, ~100ms and ignore the same call during the 100ms period */
-    kLedStateSlowBlinkContinues,         /* slow blink continues at ~600ms interval */
-    kLedStateFastBlinkContinues,         /* fast blink continues at ~200ms interval */
-} BOARD_LED_STATE;
-
-
-// virtual and physical map pair defined in board.c
-typedef struct ledmappair
-{
-    BOARD_LED_NAME ledName;         // virtual led name
-    BOARD_LED_STATE ledInitState;   // initial led state when the board boots.
-    unsigned short ledMask;         // physical GPIO pin mask
-    unsigned short ledActiveLow;    // reset bit to turn on LED
-    unsigned short ledMaskFail;     // physical GPIO pin mask for state failure
-    unsigned short ledActiveLowFail;// reset bit to turn on LED
-} LED_MAP_PAIR, *PLED_MAP_PAIR;
-
-typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
-
-/* Flash storage address information that is determined by the flash driver. */
-typedef struct flashaddrinfo
-{
-    int flash_persistent_start_blk;
-    int flash_persistent_number_blk;
-    int flash_persistent_length;
-    unsigned long flash_persistent_blk_offset;
-    int flash_scratch_pad_start_blk;         // start before psi (SP_BUF_LEN)
-    int flash_scratch_pad_number_blk;
-    int flash_scratch_pad_length;
-    unsigned long flash_scratch_pad_blk_offset;
-    int flash_nvram_start_blk;
-    int flash_nvram_number_blk;
-    int flash_nvram_length;
-    unsigned long flash_nvram_blk_offset;
-} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
-
-// scratch pad defines
-/* SP - Persisten Scratch Pad format:
-       sp header        : 32 bytes
-       tokenId-1        : 8 bytes
-       tokenId-1 len    : 4 bytes
-       tokenId-1 data    
-       ....
-       tokenId-n        : 8 bytes
-       tokenId-n len    : 4 bytes
-       tokenId-n data    
-*/
-
-#define MAGIC_NUM_LEN       8
-#define MAGIC_NUMBER        "gOGoBrCm"
-#define TOKEN_NAME_LEN      16
-#define SP_VERSION          1
-#define SP_MAX_LEN          8 * 1024            // 8k buf before psi
-#define SP_RESERVERD        16
-
-typedef struct _SP_HEADER
-{
-    char SPMagicNum[MAGIC_NUM_LEN];             // 8 bytes of magic number
-    int SPVersion;                              // version number
-    int SPUsedLen;                              // used sp len   
-    char SPReserved[SP_RESERVERD];              // reservied, total 32 bytes
-} SP_HEADER, *PSP_HEADER;
-
-typedef struct _TOKEN_DEF
-{
-    char tokenName[TOKEN_NAME_LEN];
-    int tokenLen;
-} SP_TOKEN, *PSP_TOKEN;
-
-
-/*****************************************************************************/
-/*          Function Prototypes                                              */
-/*****************************************************************************/
-#if !defined(__ASM_ASM_H)
-void dumpaddr( unsigned char *pAddr, int nLen );
-
-int kerSysNvRamGet(char *string, int strLen, int offset);
-int kerSysNvRamSet(char *string, int strLen, int offset);
-int kerSysPersistentGet(char *string, int strLen, int offset);
-int kerSysPersistentSet(char *string, int strLen, int offset);
-int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
-int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
-int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
-int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
-int kerSysReleaseMacAddress( unsigned char *pucaAddr );
-int kerSysGetSdramSize( void );
-void kerSysGetBootline(char *string, int strLen);
-void kerSysSetBootline(char *string, int strLen);
-void kerSysMipsSoftReset(void);
-void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
-void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
-int kerSysFlashSizeGet(void);
-void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
-void kerSysDeregisterDyingGaspHandler(char *devname);    
-void kerSysWakeupMonitorTask( void );
-#endif
-
-#define BOOT_CFE     0
-#define BOOT_REDBOOT 1
-
-extern int boot_loader_type;
-
-#endif /* _BOARD_H */
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c
new file mode 100644 (file)
index 0000000..d492aa3
--- /dev/null
@@ -0,0 +1,86 @@
+/*
+ * $Id$
+ *
+ * Copyright (C) 2007 OpenWrt.org
+ * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+
+static char *boot_loader_names[BOOT_LOADER_LAST+1] = {
+        [BOOT_LOADER_UNKNOWN]   = "Unknown",
+        [BOOT_LOADER_CFE]       = "CFE",
+        [BOOT_LOADER_REDBOOT]  = "RedBoot"
+};
+
+/* boot loaders specific definitions */
+#define CFE_EPTSEAL    0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */
+
+int boot_loader_type;
+/*
+ * Boot loader detection routines
+ */
+static int __init detect_cfe(void)
+{
+       /*
+        * This method only works, when we are booted directly from the CFE.
+        */
+       uint32_t cfe_handle = (uint32_t) fw_arg0;
+       uint32_t cfe_a1_val = (uint32_t) fw_arg1;
+       uint32_t cfe_entry = (uint32_t) fw_arg2;
+       uint32_t cfe_seal = (uint32_t) fw_arg3;
+
+       /* Check for CFE by finding the CFE magic number */
+       if (cfe_seal != CFE_EPTSEAL)
+               /* We are not booted from CFE */
+               return 0;
+
+       /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */
+       if (cfe_a1_val != 0)
+               return 0;
+
+       /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
+       if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
+               return 0;
+
+       return 1;
+}
+
+static int __init detect_redboot(void)
+{
+       /* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */
+       if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19))
+               return 1;
+       return 0;
+}
+
+void __init detect_bootloader(void)
+{
+       if (detect_cfe()) {
+               boot_loader_type = BOOT_LOADER_CFE;
+               printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]);
+       }
+
+       if (detect_redboot()) {
+               boot_loader_type = BOOT_LOADER_REDBOOT;
+       }
+       else
+               boot_loader_type = BOOT_LOADER_UNKNOWN;
+}
+
+EXPORT_SYMBOL(boot_loader_type);
index 7ee7526840086ca5791b368ad089a86e6f17b272..a606838f338cde6cf2a58bc38e018cfe89e3fc64 100644 (file)
@@ -35,6 +35,8 @@
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
 #include <asm/signal.h>
+#include <6348_map_part.h>
+#include <6348_intr.h>
 #include <bcm_map_part.h>
 #include <bcm_intr.h>
 
index 44a542d2f827446a0b2bbc4f6ac78725c97713df..af278a263ad67606d43f2223dd3a2a279680c75f 100644 (file)
 #include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
+
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/time.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
+#include <asm/mach-bcm963xx/6348_map_part.h>
 
-#include <bcm_map_part.h>
-#include <board.h>
-#include "boardparms.h"
-#include "softdsl/AdslCoreDefs.h"
-
-
-//char arcs_cmdline[CL_SIZE] __initdata = {0};
-/* inv_xde */
-int boot_loader_type;
-int prom_argc;
-char **prom_argv, **prom_envp;
+#include "../cfe/cfe_private.h"
 
-extern int  do_syslog(int, char *, int);
+extern void __init detect_bootloader(void); 
 extern void serial_init(void);
-extern void __init InitNvramInfo( void );
-extern void kerSysFlashInit( void );
-extern unsigned long get_nvram_start_addr(void);
-void __init create_root_nfs_cmdline( char *cmdline );
+extern int boot_loader_type;
 
 #define MACH_BCM                    MACH_BCM96348
 
 const char *get_system_type(void)
 {
-    /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr();
-
-    return( pNvramData->szBoardId );*/
-    return "brcm63xx";
-}
-
-unsigned long getMemorySize(void)
-{
-    unsigned long ulSdramType = BOARD_SDRAM_TYPE;
-
-    unsigned long ulSdramSize;
-
-    switch( ulSdramType )
-    {
-    case BP_MEMORY_16MB_1_CHIP:
-    case BP_MEMORY_16MB_2_CHIP:
-        ulSdramSize = 16 * 1024 * 1024;
-        break;
-    case BP_MEMORY_32MB_1_CHIP:
-    case BP_MEMORY_32MB_2_CHIP:
-        ulSdramSize = 32 * 1024 * 1024;
-        break;
-    case BP_MEMORY_64MB_2_CHIP:
-        ulSdramSize = 64 * 1024 * 1024;
-        break;
-    default:
-        ulSdramSize = 8 * 1024 * 1024;
-        break;
-    }
-    if (boot_loader_type == BOOT_CFE)
-      return ulSdramSize;
-    else
-      // assume that there is one contiguous memory map
-      return boot_mem_map.map[0].size;
+       return "Broadcom BCM963xx";
 }
 
-/* --------------------------------------------------------------------------
-    Name: prom_init
- -------------------------------------------------------------------------- */
 void __init prom_init(void)
 {
-    extern ulong r4k_interval;
+       serial_init();
 
-    serial_init();
+       printk( "%s prom init\n", get_system_type() );
 
-    prom_argc = fw_arg0;
-    prom_argv = (char **) fw_arg1;
-    prom_envp = (char **) fw_arg2;
+       PERF->IrqMask = 0;
 
-    if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) {
-      strncpy(arcs_cmdline, prom_argv[1], CL_SIZE);
-    }
+       detect_bootloader();
 
-    if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) {
-      boot_loader_type =  BOOT_CFE;
-    }
-    else {
-      boot_loader_type = BOOT_REDBOOT;
-    }
-
-    do_syslog(8, NULL, 8);
-
-    printk( "%s prom init\n", get_system_type() );
-
-    PERF->IrqMask = 0;
-
-    arcs_cmdline[0] = '\0';
-
-       if (boot_loader_type == BOOT_CFE)
-      add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-    else
-       add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
-
-    mips_machgroup = MACH_GROUP_BRCM;
-    mips_machtype = MACH_BCM;
-
-       BpSetBoardId("96348GW-10");
+       if (boot_loader_type == BOOT_LOADER_CFE) {
+               cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3);
+               add_memory_region(0, (boot_mem_map.map[0].size - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+       }
+       else
+               add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM);
+       
+       mips_machgroup = MACH_GROUP_BRCM;
+       mips_machtype = MACH_BCM;
 }
 
-/* --------------------------------------------------------------------------
-    Name: prom_free_prom_memory
-Abstract:
- -------------------------------------------------------------------------- */
 void __init prom_free_prom_memory(void)
 {
-
+       /* We do not have any memory to free */
 }
-
index bd53abb5f27dcf4af69f34ed4749c2ffef0a5a7f..bb745aec6edbac4bdd7dd8347d95c6cbf57a47f3 100644 (file)
@@ -37,6 +37,7 @@
 #include <asm/mc146818rtc.h> 
 
 #include <bcm_map_part.h>
+#include <6348_map_part.h>
 #include <board.h>
 
 #define  SER63XX_DEFAULT_BAUD      115200
@@ -54,7 +55,7 @@
 -------------------------------------------------------------------------- */
 void __init serial_init(void)
 {
-    UINT32 tmpVal = SER63XX_DEFAULT_BAUD;
+    u32 tmpVal = SER63XX_DEFAULT_BAUD;
     ULONG clockFreqHz;    
 
 #if defined(CONFIG_BCM96345)
index 4a4fdadba59edac6ba71ce425c4b6266df1ac9ff..bc28b549e5c0f4149fb7e34e26582c6105a885dd 100644 (file)
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/pm.h>
+#include <linux/bootmem.h>
 
 #include <asm/addrspace.h>
 #include <asm/bcache.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
 #include <asm/gdb-stub.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/mach-bcm963xx/bootloaders.h>
 
 extern void brcm_time_init(void);
-extern unsigned long getMemorySize(void);
+extern int boot_loader_type;
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
 #include <linux/pci.h>
@@ -58,15 +62,15 @@ static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE);
  */
 static void brcm_machine_restart(char *command)
 {
-    const unsigned long ulSoftReset = 0x00000001;
-    unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
-    *pulPllCtrl |= ulSoftReset;
+       const unsigned long ulSoftReset = 0x00000001;
+       unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008;
+       *pulPllCtrl |= ulSoftReset;
 }
 
 static void brcm_machine_halt(void)
 {
-    printk("System halted\n");
-    while (1);
+       printk("System halted\n");
+       while (1);
 }
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
@@ -372,20 +376,23 @@ static int mpi_DetectPcCard(void)
 
 static int mpi_init(void)
 {
-    unsigned long data;
-    unsigned int chipid;
-    unsigned int chiprev;
-    unsigned int sdramsize;
-
-    chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
-    chiprev = (PERF->RevID & 0xFF);
-    sdramsize = getMemorySize();
-    /*
-     * Init the pci interface 
-     */
-    data = GPIO->GPIOMode; // GPIO mode register
-    data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
-    GPIO->GPIOMode = data; // PCI internal arbiter
+       unsigned long data;
+       unsigned int chipid, chiprev, sdramsize;
+
+       printk("Broadcom BCM963xx MPI\n");
+       chipid  = (PERF->RevID & 0xFFFF0000) >> 16;
+       chiprev = (PERF->RevID & 0xFF);
+
+       if (boot_loader_type == BOOT_LOADER_CFE)
+               sdramsize = boot_mem_map.map[0].size;
+       else
+               sdramsize = 0x01000000; 
+       /*
+        * Init the pci interface 
+        */
+       data = GPIO->GPIOMode; // GPIO mode register
+       data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus
+       GPIO->GPIOMode = data; // PCI internal arbiter
 
     /*
      * In the BCM6348 CardBus support is defaulted to Slot 0
@@ -456,68 +463,16 @@ static int mpi_init(void)
 }
 #endif
 
-static int __init brcm63xx_setup(void)
+void __init plat_mem_setup(void)
 {
-    extern int panic_timeout;
-
-    _machine_restart = brcm_machine_restart;
-    _machine_halt = brcm_machine_halt;
-    pm_power_off = brcm_machine_halt;
+       _machine_restart = brcm_machine_restart;
+       _machine_halt = brcm_machine_halt;
+       pm_power_off = brcm_machine_halt;
 
-    board_time_init = brcm_time_init;
-
-    panic_timeout = 5;
+       board_time_init = brcm_time_init;
 
 #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI)
-    /* mpi initialization */
-    mpi_init();
+       /* mpi initialization */
+       mpi_init();
 #endif
-    return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-    brcm63xx_setup();
-}
-
-/***************************************************************************
- * C++ New and delete operator functions
- ***************************************************************************/
-
-/* void *operator new(unsigned int sz) */
-void *_Znwj(unsigned int sz)
-{
-    return( kmalloc(sz, GFP_KERNEL) );
 }
-
-/* void *operator new[](unsigned int sz)*/
-void *_Znaj(unsigned int sz)
-{
-    return( kmalloc(sz, GFP_KERNEL) );
-}
-
-/* placement new operator */
-/* void *operator new (unsigned int size, void *ptr) */
-void *ZnwjPv(unsigned int size, void *ptr)
-{
-    return ptr;
-}
-
-/* void operator delete(void *m) */
-void _ZdlPv(void *m)
-{
-    kfree(m);
-}
-
-/* void operator delete[](void *m) */
-void _ZdaPv(void *m)
-{
-    kfree(m);
-}
-
-EXPORT_SYMBOL(_Znwj);
-EXPORT_SYMBOL(_Znaj);
-EXPORT_SYMBOL(ZnwjPv);
-EXPORT_SYMBOL(_ZdlPv);
-EXPORT_SYMBOL(_ZdaPv);
-
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h
deleted file mode 100644 (file)
index b05d98e..0000000
+++ /dev/null
@@ -1,2 +0,0 @@
-#define ADSL_SDRAM_IMAGE_SIZE (384*1024)
-
index b615c2842988cfa6fd9eda730ad63764ae9ec410..8b82ada371f883828fab8edbe69e3ed029083035 100644 (file)
@@ -35,6 +35,8 @@
 #include <asm/div64.h>
 #include <asm/time.h>
 
+#include <6348_map_part.h>
+#include <6348_intr.h>
 #include <bcm_map_part.h>
 #include <bcm_intr.h>
 
@@ -54,7 +56,7 @@ static unsigned long r4k_cur;         /* What counter should be at next timer irq */
 
 static inline unsigned long __init calculateCpuSpeed(void)
 {
-    UINT32 pllStrap = PERF->PllStrap;
+    u32 pllStrap = PERF->PllStrap;
     int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT;
     int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT;
     int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT;
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile
new file mode 100644 (file)
index 0000000..d9f046a
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for the Broadcom Common Firmware Environment support
+#
+
+obj-y += cfe.o
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c
new file mode 100644 (file)
index 0000000..6d16111
--- /dev/null
@@ -0,0 +1,533 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors:  Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions.  Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ *    retain this copyright notice and list of conditions as they appear in
+ *    the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
+ *    used to endorse or promote products derived from this software
+ *    without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/cfe.h>
+
+#include "cfe_private.h"
+
+
+static cfe_uint_t cfe_handle;
+static int (*cfe_trampoline)(long handle, long iocb);
+
+
+#include <linux/kernel.h>
+
+void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1,
+                     unsigned long fwarg2, unsigned long fwarg3)
+{
+       if (fwarg3 == 0x80300000) {
+               /* WRT54G workaround */
+               fwarg3 = CFE_EPTSEAL;
+               fwarg2 = 0xBFC00500;
+       }
+       if (fwarg3 != CFE_EPTSEAL) {
+               /* We are not booted from CFE */
+               return;
+       }
+       if (fwarg1 == 0) {
+               /* We are on the boot CPU */
+               cfe_handle = (cfe_uint_t)fwarg0;
+               cfe_trampoline = CFE_TO_PTR(fwarg2);
+       }
+}
+
+int cfe_vprintk(const char *fmt, va_list args)
+{
+       static char buffer[1024];
+       static DEFINE_SPINLOCK(lock);
+       static const char pfx[] = "CFE-console: ";
+       static const size_t pfx_len = sizeof(pfx) - 1;
+       unsigned long flags;
+       int len, cnt, pos;
+       int handle;
+       int res;
+
+       if (!cfe_present())
+               return -ENODEV;
+
+       spin_lock_irqsave(&lock, flags);
+       handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+       if (CFE_ISERR(handle)) {
+               len = -EIO;
+               goto out;
+       }
+       strcpy(buffer, pfx);
+       len = vscnprintf(buffer + pfx_len,
+                        sizeof(buffer) - pfx_len - 2,
+                        fmt, args);
+       len += pfx_len;
+       /* The CFE console requires CR-LF line-ends.
+        * Add a CR, if we only terminate lines with a LF.
+        * This does only fix CR-LF at the end of the string.
+        * So for multiple lines, use multiple cfe_vprintk calls.
+        */
+       if (len > 1 &&
+           buffer[len - 1] == '\n' && buffer[len - 2] != '\r') {
+               buffer[len - 1] = '\r';
+               buffer[len] = '\n';
+               len += 1;
+       }
+       cnt = len;
+       pos = 0;
+       while (cnt > 0) {
+               res = cfe_write(handle, buffer + pos, len - pos);
+               if (CFE_ISERR(res)) {
+                       len = -EIO;
+                       goto out;
+               }
+               cnt -= res;
+               pos += res;
+       }
+out:
+       spin_unlock_irqrestore(&lock, flags);
+
+       return len;
+}
+
+int cfe_printk(const char *fmt, ...)
+{
+       va_list args;
+       int res;
+
+       va_start(args, fmt);
+       res = cfe_vprintk(fmt, args);
+       va_end(args);
+
+       return res;
+}
+
+static int cfe_iocb_dispatch(struct cfe_iocb *iocb)
+{
+       if (!cfe_present())
+               return CFE_ERR_UNSUPPORTED;
+       return cfe_trampoline((long)cfe_handle, (long)iocb);
+}
+
+int cfe_present(void)
+{
+       return (cfe_trampoline != NULL);
+}
+
+int cfe_close(int handle)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_CLOSE;
+       iocb.handle = handle;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_CPUCTL;
+       iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+       iocb.cpuctl.number = cpu;
+       iocb.cpuctl.command = CFE_CPU_CMD_START;
+       iocb.cpuctl.gp = gp;
+       iocb.cpuctl.sp = sp;
+       iocb.cpuctl.a1 = a1;
+       iocb.cpuctl.start_addr = (long)fn;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_cpu_stop(int cpu)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_CPUCTL;
+       iocb.psize = sizeof(struct cfe_iocb_cpuctl);
+       iocb.cpuctl.number = cpu;
+       iocb.cpuctl.command = CFE_CPU_CMD_STOP;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_ENV_ENUM;
+       iocb.psize = sizeof(struct cfe_iocb_envbuf);
+       iocb.envbuf.index = idx;
+       iocb.envbuf.name = PTR_TO_CFE(name);
+       iocb.envbuf.name_len = namelen;
+       iocb.envbuf.val = PTR_TO_CFE(val);
+       iocb.envbuf.val_len = vallen;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enumdev(int idx, char *name, int namelen)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+
+       iocb.fcode = CFE_CMD_DEV_ENUM;
+       iocb.psize = sizeof(struct cfe_iocb_envbuf);
+       iocb.envbuf.index = idx;
+       iocb.envbuf.name = PTR_TO_CFE(name);
+       iocb.envbuf.name_len = namelen;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_enummem(int idx, int flags, u64 *start, u64 *length,
+               u64 *type)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+
+       iocb.fcode = CFE_CMD_FW_MEMENUM;
+       iocb.flags = flags;
+       iocb.psize = sizeof(struct cfe_iocb_meminfo);
+       iocb.meminfo.index = idx;
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (!CFE_ISERR(iocb.status)) {
+               *start = iocb.meminfo.addr;
+               *length = iocb.meminfo.size;
+               *type = iocb.meminfo.type;
+       }
+
+       return iocb.status;
+}
+
+int cfe_exit(int warm, int status)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+printk("CFE REBOOT\n");
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_RESTART;
+       if (warm)
+               iocb.flags = CFE_FLG_WARMSTART;
+       iocb.psize = sizeof(struct cfe_iocb_exitstat);
+       iocb.exitstat.status = status;
+
+printk("CALL\n");
+       err = cfe_iocb_dispatch(&iocb);
+printk("DONE\n");
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_flushcache(int flags)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_FLUSHCACHE;
+       iocb.flags = flags;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getdevinfo(char *name)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_GETINFO;
+       iocb.psize = sizeof(struct cfe_iocb_buf);
+       iocb.buffer.ptr = PTR_TO_CFE(name);
+       iocb.buffer.length = strlen(name);
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.buffer.devflags;
+}
+
+int cfe_getenv(char *name, char *dest, int destlen)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       dest[0] = '\0';
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_ENV_GET;
+       iocb.psize = sizeof(struct cfe_iocb_envbuf);
+       iocb.envbuf.name = PTR_TO_CFE(name);
+       iocb.envbuf.name_len = strlen(name);
+       iocb.envbuf.val = PTR_TO_CFE(dest);
+       iocb.envbuf.val_len = destlen;
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_getfwinfo(struct cfe_fwinfo *info)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_GETINFO;
+       iocb.psize = sizeof(struct cfe_iocb_fwinfo);
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return err;
+
+       info->version = iocb.fwinfo.version;
+       info->totalmem = iocb.fwinfo.totalmem;
+       info->flags = iocb.fwinfo.flags;
+       info->boardid = iocb.fwinfo.boardid;
+       info->bootarea_va = iocb.fwinfo.bootarea_va;
+       info->bootarea_pa = iocb.fwinfo.bootarea_pa;
+       info->bootarea_size = iocb.fwinfo.bootarea_size;
+
+       return iocb.status;
+}
+
+int cfe_getstdhandle(int handletype)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_GETHANDLE;
+       iocb.flags = handletype;
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.handle;
+}
+
+int cfe_getticks(s64 *ticks)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_FW_GETTIME;
+       iocb.psize = sizeof(struct cfe_iocb_time);
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (!CFE_ISERR(iocb.status))
+               *ticks = iocb.time.ticks;
+
+       return iocb.status;
+}
+
+int cfe_inpstat(int handle)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_INPSTAT;
+       iocb.handle = handle;
+       iocb.psize = sizeof(struct cfe_iocb_inpstat);
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.inpstat.status;
+}
+
+int cfe_ioctl(int handle, unsigned int ioctlnum,
+             unsigned char *buffer, int length,
+             int *retlen, u64 offset)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_IOCTL;
+       iocb.handle = handle;
+       iocb.psize = sizeof(struct cfe_iocb_buf);
+       iocb.buffer.offset = offset;
+       iocb.buffer.ioctlcmd = ioctlnum;
+       iocb.buffer.ptr = PTR_TO_CFE(buffer);
+       iocb.buffer.length = length;
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+       if (retlen)
+               *retlen = iocb.buffer.retlen;
+
+       return iocb.status;
+}
+
+int cfe_open(char *name)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_OPEN;
+       iocb.psize = sizeof(struct cfe_iocb_buf);
+       iocb.buffer.ptr = PTR_TO_CFE(name);
+       iocb.buffer.length = strlen(name);
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.handle;
+}
+
+int cfe_read(int handle, unsigned char *buffer, int length)
+{
+       return cfe_readblk(handle, 0, buffer, length);
+}
+
+int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_READ;
+       iocb.handle = handle;
+       iocb.psize = sizeof(struct cfe_iocb_buf);
+       iocb.buffer.offset = offset;
+       iocb.buffer.ptr = PTR_TO_CFE(buffer);
+       iocb.buffer.length = length;
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.buffer.retlen;
+}
+
+int cfe_setenv(char *name, char *val)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_ENV_SET;
+       iocb.psize = sizeof(struct cfe_iocb_envbuf);
+       iocb.envbuf.name = PTR_TO_CFE(name);
+       iocb.envbuf.name_len = strlen(name);
+       iocb.envbuf.val = PTR_TO_CFE(val);
+       iocb.envbuf.val_len = strlen(val);
+
+       err = cfe_iocb_dispatch(&iocb);
+
+       return (CFE_ISERR(err)) ? err : iocb.status;
+}
+
+int cfe_write(int handle, unsigned char *buffer, int length)
+{
+       return cfe_writeblk(handle, 0, buffer, length);
+}
+
+int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
+{
+       struct cfe_iocb iocb;
+       int err;
+
+       memset(&iocb, 0, sizeof(iocb));
+       iocb.fcode = CFE_CMD_DEV_WRITE;
+       iocb.handle = handle;
+       iocb.psize = sizeof(struct cfe_iocb_buf);
+       iocb.buffer.offset = offset;
+       iocb.buffer.ptr = PTR_TO_CFE(buffer);
+       iocb.buffer.length = length;
+
+       err = cfe_iocb_dispatch(&iocb);
+       if (CFE_ISERR(err))
+               return err;
+       if (CFE_ISERR(iocb.status))
+               return iocb.status;
+
+       return iocb.buffer.retlen;
+}
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h
new file mode 100644 (file)
index 0000000..0a604d3
--- /dev/null
@@ -0,0 +1,176 @@
+/*
+ * Broadcom Common Firmware Environment (CFE) support
+ *
+ * Copyright 2000, 2001, 2002
+ * Broadcom Corporation. All rights reserved.
+ *
+ * Copyright (C) 2006 Michael Buesch
+ *
+ * Original Authors:  Mitch Lichtenberg, Chris Demetriou
+ *
+ * This software is furnished under license and may be used and copied only
+ * in accordance with the following terms and conditions.  Subject to these
+ * conditions, you may download, copy, install, use, modify and distribute
+ * modified or unmodified copies of this software in source and/or binary
+ * form. No title or ownership is transferred hereby.
+ *
+ * 1) Any source code used, modified or distributed must reproduce and
+ *    retain this copyright notice and list of conditions as they appear in
+ *    the source file.
+ *
+ * 2) No right is granted to use any trade name, trademark, or logo of
+ *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
+ *    used to endorse or promote products derived from this software
+ *    without the prior written permission of Broadcom Corporation.
+ *
+ * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
+ *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
+ *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
+ *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
+ *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
+ *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LINUX_CFE_PRIVATE_H_
+#define LINUX_CFE_PRIVATE_H_
+
+#ifndef __ASSEMBLY__
+
+/* Seal indicating CFE's presence, passed to the kernel. */
+#define CFE_EPTSEAL            0x43464531
+
+#define CFE_CMD_FW_GETINFO     0
+#define CFE_CMD_FW_RESTART     1
+#define CFE_CMD_FW_BOOT                2
+#define CFE_CMD_FW_CPUCTL      3
+#define CFE_CMD_FW_GETTIME      4
+#define CFE_CMD_FW_MEMENUM     5
+#define CFE_CMD_FW_FLUSHCACHE  6
+
+#define CFE_CMD_DEV_GETHANDLE  9
+#define CFE_CMD_DEV_ENUM       10
+#define CFE_CMD_DEV_OPEN       11
+#define CFE_CMD_DEV_INPSTAT    12
+#define CFE_CMD_DEV_READ       13
+#define CFE_CMD_DEV_WRITE      14
+#define CFE_CMD_DEV_IOCTL      15
+#define CFE_CMD_DEV_CLOSE      16
+#define CFE_CMD_DEV_GETINFO    17
+
+#define CFE_CMD_ENV_ENUM       20
+#define CFE_CMD_ENV_GET                22
+#define CFE_CMD_ENV_SET                23
+#define CFE_CMD_ENV_DEL                24
+
+#define CFE_CMD_MAX            32
+
+#define CFE_CMD_VENDOR_USE     0x8000  /* codes above this are for customer use */
+
+typedef u64 cfe_uint_t;
+typedef s64 cfe_int_t;
+typedef s64 cfe_ptr_t;
+
+/* Cast a pointer from native to CFE-API pointer and back */
+#define CFE_TO_PTR(p)          ((void *)(unsigned long)(p))
+#define PTR_TO_CFE(p)          ((cfe_ptr_t)(unsigned long)(p))
+
+struct cfe_iocb_buf {
+       cfe_uint_t      offset;         /* offset on device (bytes) */
+       cfe_ptr_t       ptr;            /* pointer to a buffer */
+       cfe_uint_t      length;         /* length of this buffer */
+       cfe_uint_t      retlen;         /* returned length (for read ops) */
+       union {
+               cfe_uint_t      ioctlcmd;       /* IOCTL command (used only for IOCTLs) */
+               cfe_uint_t      devflags;       /* Returned device info flags */
+       };
+};
+
+struct cfe_iocb_inpstat {
+       cfe_uint_t      status;         /* 1 means input available */
+};
+
+struct cfe_iocb_envbuf {
+       cfe_int_t       index;          /* 0-based enumeration index */
+       cfe_ptr_t       name;           /* name string buffer */
+       cfe_int_t       name_len;       /* size of name buffer */
+       cfe_ptr_t       val;            /* value string buffer */
+       cfe_int_t       val_len;        /* size of value string buffer */
+};
+
+struct cfe_iocb_cpuctl {
+       cfe_uint_t      number;         /* cpu number to control */
+       cfe_uint_t      command;        /* command to issue to CPU */
+       cfe_uint_t      start_addr;     /* CPU start address */
+       cfe_uint_t      gp;             /* starting GP value */
+       cfe_uint_t      sp;             /* starting SP value */
+       cfe_uint_t      a1;             /* starting A1 value */
+};
+
+struct cfe_iocb_time {
+       cfe_int_t       ticks;          /* current time in ticks */
+};
+
+struct cfe_iocb_exitstat {
+       cfe_int_t       status;
+};
+
+struct cfe_iocb_meminfo {
+       cfe_int_t       index;          /* 0-based enumeration index */
+       cfe_int_t       type;           /* type of memory block */
+       cfe_uint_t      addr;           /* physical start address */
+       cfe_uint_t      size;           /* block size */
+};
+
+struct cfe_iocb_fwinfo {
+       cfe_int_t       version;        /* major, minor, eco version */
+       cfe_int_t       totalmem;       /* total installed mem */
+       cfe_int_t       flags;          /* various flags */
+       cfe_int_t       boardid;        /* board ID */
+       cfe_int_t       bootarea_va;    /* VA of boot area */
+       cfe_int_t       bootarea_pa;    /* PA of boot area