[brcm63xx] add support for BT Voyager 2110 (#8810)
authorFlorian Fainelli <florian@openwrt.org>
Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959

target/linux/brcm63xx/base-files/etc/defconfig/V2110/network [new file with mode: 0644]
target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
target/linux/brcm63xx/base-files/lib/brcm63xx.sh
target/linux/brcm63xx/patches-2.6.37/980-board_BTV2110.patch [new file with mode: 0644]

diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/V2110/network b/target/linux/brcm63xx/base-files/etc/defconfig/V2110/network
new file mode 100644 (file)
index 0000000..4758140
--- /dev/null
@@ -0,0 +1,14 @@
+# Copyright (C) 2011 OpenWrt.org
+
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
index 65d00d654d0a794d0fee524961fda02bed86bdad..72ba3cc30bada7cbc5eefe136685316544bc8214 100755 (executable)
@@ -13,7 +13,7 @@ do_fixcrc() {
 brcm63xx_detect
 
 case "$board_name" in
-       "bcm63xx/CPVA642 "* | "bcm63xx/MAGIC "* | "bcm63xx/V2500V_BB "* )
+       "bcm63xx/CPVA642 "* | "bcm63xx/MAGIC "* | "bcm63xx/V2500V_BB "* | "bcm63xx/V2110 "*)
                do_fixcrc
                ;;
 esac
index d2ffabd176fcb17579cc9afa8a68ec0a3cf3a976..ed3447d0132e7f8e1a5442a62f79fda7aaa8280a 100755 (executable)
@@ -54,6 +54,11 @@ brcm63xx_detect() {
                brcm63xx_has_reset_button="true"
                ifname=eth0
                ;;
+       "bcm63xx/V2110 "*)
+               status_led="V2110:power:green"
+               brcm63xx_has_reset_button="true"
+               ifname=eth0
+               ;;
        "bcm63xx/CPVA642 "* )
                status_led="power:green"
                brcm63xx_has_reset_button="true"
diff --git a/target/linux/brcm63xx/patches-2.6.37/980-board_BTV2110.patch b/target/linux/brcm63xx/patches-2.6.37/980-board_BTV2110.patch
new file mode 100644 (file)
index 0000000..95b2b33
--- /dev/null
@@ -0,0 +1,73 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -444,6 +444,62 @@ static struct board_info __initdata boar
+       },
+ };
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++      .name                           = "V2110",
++      .expected_cpu_id                = 0x6348,
++
++      .has_uart0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "V2110:green:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name           = "V2110:red:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:adsl",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {       .name           = "V2110:green:ppp",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "V2110:green:wireless",
++                      .gpio           = 6,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 33,
++                      .active_low     = 1,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++      },
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+       .name                           = "96348GW",
+       .expected_cpu_id                = 0x6348,
+@@ -1933,6 +1989,7 @@ static const struct board_info __initdat
+       &board_96348_D4PW,
+       &board_spw500v,
+       &board_ct536_ct5621,
++      &board_V2110,
+       &board_96348sv,
+ #endif