+++ /dev/null
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -629,7 +629,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
-
- static int __init parse_tag_cmdline(const struct tag *tag)
- {
-- strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-+// strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
- return 0;
- }
-
+++ /dev/null
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -15,6 +15,9 @@
- #include <linux/mtd/physmap.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/ethtool.h>
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <net/dsa.h>
- #include <asm/mach-types.h>
- #include <asm/gpio.h>
-@@ -24,6 +27,80 @@
- #include "common.h"
- #include "mpp.h"
-
-+/*
-+ * LEDs attached to GPIO
-+ */
-+static struct gpio_led wrt350n_v2_led_pins[] = {
-+ {
-+ .name = "wrt350nv2:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }, {
-+ .name = "wrt350nv2:green:security",
-+ .gpio = 1,
-+ .active_low = 1,
-+ }, {
-+ .name = "wrt350nv2:orange:power",
-+ .gpio = 5,
-+ .active_low = 1,
-+ }, {
-+ .name = "wrt350nv2:green:usb",
-+ .gpio = 6,
-+ .active_low = 1,
-+ }, {
-+ .name = "wrt350nv2:green:wireless",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_led_platform_data wrt350n_v2_led_data = {
-+ .leds = wrt350n_v2_led_pins,
-+ .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
-+};
-+
-+static struct platform_device wrt350n_v2_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &wrt350n_v2_led_data,
-+ },
-+};
-+
-+/*
-+ * Buttons attached to GPIO
-+ */
-+static struct gpio_keys_button wrt350n_v2_buttons[] = {
-+ {
-+ .code = KEY_RESTART,
-+ .gpio = 3,
-+ .desc = "Reset Button",
-+ .active_low = 1,
-+ }, {
-+ .code = KEY_WLAN,
-+ .gpio = 2,
-+ .desc = "WPS Button",
-+ .active_low = 1,
-+ },
-+};
-+
-+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-+ .buttons = wrt350n_v2_buttons,
-+ .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
-+};
-+
-+static struct platform_device wrt350n_v2_button_device = {
-+ .name = "gpio-keys",
-+ .id = -1,
-+ .num_resources = 0,
-+ .dev = {
-+ .platform_data = &wrt350n_v2_button_data,
-+ },
-+};
-+
-+/*
-+ * General setup
-+ */
- static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Power LED green (0=on) */
- { 1, MPP_GPIO }, /* Security LED (0=on) */
-@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
- orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
- WRT350N_V2_NOR_BOOT_SIZE);
- platform_device_register(&wrt350n_v2_nor_flash);
-+ platform_device_register(&wrt350n_v2_button_device);
-+ platform_device_register(&wrt350n_v2_leds);
- }
-
- static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+++ /dev/null
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -135,11 +135,11 @@ static struct mtd_partition wrt350n_v2_n
- {
- .name = "kernel",
- .offset = 0x00000000,
-- .size = 0x00760000,
-+ .size = 0x00100000, // change to kernel mtd size here (1/3)
- }, {
- .name = "rootfs",
-- .offset = 0x001a0000,
-- .size = 0x005c0000,
-+ .offset = 0x00100000, // change to kernel mtd size here (2/3)
-+ .size = 0x00650000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
- }, {
- .name = "lang",
- .offset = 0x00760000,
-@@ -152,6 +152,14 @@ static struct mtd_partition wrt350n_v2_n
- .name = "u-boot",
- .offset = 0x007c0000,
- .size = 0x00040000,
-+ }, {
-+ .name = "eRcOmM_do_not_touch",
-+ .offset = 0x00750000,
-+ .size = 0x00010000, // erasesize
-+ }, {
-+ .name = "image", // for sysupgrade
-+ .offset = 0x00000000,
-+ .size = 0x00750000,
- },
- };
-
+++ /dev/null
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -67,6 +67,10 @@ static struct mtd_partition wnr854t_nor_
- .name = "uboot",
- .offset = 0x00760000,
- .size = 0x00040000,
-+ }, {
-+ .name = "image", // for sysupgrade
-+ .offset = 0x00000000,
-+ .size = 0x00760000,
- },
- };
-
+++ /dev/null
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -16,6 +16,13 @@ config MACH_RD88F5182
- Say 'Y' here if you want your kernel to support the
- Marvell Orion-NAS (88F5182) RD2
-
-+config MACH_DT2
-+ bool "Freecom DataTank Gateway"
-+ select I2C_BOARDINFO
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Freecom DataTank Gateway
-+
- config MACH_KUROBOX_PRO
- bool "KuroBox Pro"
- select I2C_BOARDINFO
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-se
- obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
- obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
- obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
-+obj-$(CONFIG_MACH_DT2) += dt2-setup.o
+++ /dev/null
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -332,7 +332,7 @@ struct sk_buff {
- * want to keep them across layers you have to do a skb_clone()
- * first. This is owned by whoever has the skb queued ATM.
- */
-- char cb[48];
-+ char cb[48] __attribute__((aligned(8)));
- #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
- void *cb_next;
- #endif
projects / openwrt / svn-archive / archive.git / commitdiff