[mac80211] Update compat-wireless to 2009-03-18
authorHauke Mehrtens <hauke@hauke-m.de>
Wed, 18 Mar 2009 22:22:57 +0000 (22:22 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Wed, 18 Mar 2009 22:22:57 +0000 (22:22 +0000)
Removing of include/net/ieee80211_radiotap.h is not needed, because it is only used by this compat-wireless.
There are changes in that file and compat-wireless needs the newest version.

Some more symbols are deactivated in the default config file, this will make building faster.
The rt2800pci patches are up to date now.

SVN-Revision: 14946

22 files changed:
package/mac80211/Makefile
package/mac80211/patches/007-remove_unused_stuff.patch
package/mac80211/patches/201-ath5k_eeprom.patch [deleted file]
package/mac80211/patches/202-ath5k_txpower_2413.patch [deleted file]
package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch [new file with mode: 0644]
package/mac80211/patches/301-rt2x00-Implement-support-for-802.11n.patch
package/mac80211/patches/302-rt2x00-Implement-support-for-rt2800pci.patch
package/mac80211/patches/303-rt2x00-Implement-support-for-rt2800usb.patch
package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch [deleted file]
package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch [new file with mode: 0644]
package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch [deleted file]
package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch [new file with mode: 0644]
package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch [deleted file]
package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch [new file with mode: 0644]
package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch [new file with mode: 0644]
package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch [deleted file]
package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch [new file with mode: 0644]
package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch [deleted file]
package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch [new file with mode: 0644]
package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
package/mac80211/patches/402-ath9k-enable-debug.patch
package/mac80211/patches/403-ath9k-fix-invalid-mac-address-handling.patch

index de3b4c5..b1e5a60 100644 (file)
@@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI
   PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
   PATCH_DIR:=./patches-old
 else
-  PKG_VERSION:=2009-03-13
+  PKG_VERSION:=2009-03-18
   PKG_RELEASE:=1
   PKG_SOURCE_URL:= \
        http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \
        http://wireless.kernel.org/download/compat-wireless-2.6
-  PKG_MD5SUM:=bc924e8914a78d5a40ce4c17e5d28447
+  PKG_MD5SUM:=d46d230f62aed9bdec7a1f168feb221b
 endif
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
@@ -428,7 +428,6 @@ define Build/Prepare
        $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
        rm -rf $(PKG_BUILD_DIR)/include/linux/ssb
        rm -f $(PKG_BUILD_DIR)/include/net/ieee80211.h
-       rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h
        rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h
 endef
 
index 965416d..66b5c47 100644 (file)
@@ -1,10 +1,8 @@
-Index: compat-wireless-2009-03-13/config.mk
-===================================================================
---- compat-wireless-2009-03-13.orig/config.mk  2009-03-17 23:34:31.000000000 +0100
-+++ compat-wireless-2009-03-13/config.mk       2009-03-17 23:40:08.000000000 +0100
-@@ -91,10 +91,10 @@ CONFIG_MAC80211_MESH=y
+--- a/config.mk
++++ b/config.mk
+@@ -104,10 +104,10 @@ CONFIG_MAC80211_MESH=y
  CONFIG_CFG80211=m
- # CONFIG_CFG80211_REG_DEBUG is not set
+ # CONFIG_CFG80211_REG_DEBUG=y
  
 -CONFIG_LIB80211=m
 -CONFIG_LIB80211_CRYPT_WEP=m
@@ -14,47 +12,80 @@ Index: compat-wireless-2009-03-13/config.mk
 +# CONFIG_LIB80211_CRYPT_WEP=m
 +# CONFIG_LIB80211_CRYPT_CCMP=m
 +# CONFIG_LIB80211_CRYPT_TKIP=m
+ # CONFIG_LIB80211_DEBUG=y
  
  CONFIG_NL80211=y
+@@ -128,54 +128,54 @@ CONFIG_ATH9K=m
+ # CONFIG_ATH9K_DEBUG=y
  
-@@ -129,18 +129,18 @@ CONFIG_IWL3945_LEDS=y
  
+-CONFIG_IWLWIFI=m
+-CONFIG_IWLWIFI_LEDS=y
++# CONFIG_IWLWIFI=m
++# CONFIG_IWLWIFI_LEDS=y
+ # CONFIG_IWLWIFI_RFKILL=y
+-CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+ # CONFIG_IWLWIFI_DEBUG=y
+ # CONFIG_IWLWIFI_DEBUGFS=y
+-CONFIG_IWLAGN=m
+-CONFIG_IWL4965=y
+-CONFIG_IWL5000=y
+-CONFIG_IWL3945=m
+-CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
++# CONFIG_IWLAGN=m
++# CONFIG_IWL4965=y
++# CONFIG_IWL5000=y
++# CONFIG_IWL3945=m
++# CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
  
- CONFIG_B43=m
+-CONFIG_B43=m
 -CONFIG_B43_PCI_AUTOSELECT=y
 -CONFIG_B43_PCICORE_AUTOSELECT=y
 -CONFIG_B43_PCMCIA=y
 -CONFIG_B43_PIO=y
 -CONFIG_B43_LEDS=y
++# CONFIG_B43=m
 +# CONFIG_B43_PCI_AUTOSELECT=y
 +# CONFIG_B43_PCICORE_AUTOSELECT=y
 +# CONFIG_B43_PCMCIA=y
 +# CONFIG_B43_PIO=y
 +# CONFIG_B43_LEDS=y
  # CONFIG_B43_RFKILL=y
- # CONFIG_B43_DEBUG is not set
+ # CONFIG_B43_DEBUG=y
+ # CONFIG_B43_FORCE_PIO=y
  
- CONFIG_B43LEGACY=m
- CONFIG_B43LEGACY_PCI_AUTOSELECT=y
- CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+-CONFIG_B43LEGACY=m
+-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
 -CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY=m
++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
 +# CONFIG_B43LEGACY_LEDS=y
  # CONFIG_B43LEGACY_RFKILL=y
  # CONFIG_B43LEGACY_DEBUG=y
- CONFIG_B43LEGACY_DMA=y
-@@ -150,17 +150,17 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
- # CONFIG_B43LEGACY_PIO_MODE is not set
+-CONFIG_B43LEGACY_DMA=y
+-CONFIG_B43LEGACY_PIO=y
+-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
++# CONFIG_B43LEGACY_DMA=y
++# CONFIG_B43LEGACY_PIO=y
++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+ # CONFIG_B43LEGACY_DMA_MODE=y
+ # CONFIG_B43LEGACY_PIO_MODE=y
  
  # The Intel ipws
 -CONFIG_LIBIPW=m
 +# CONFIG_LIBIPW=m
- # CONFIG_LIBIPW_DEBUG is not set
+ # CONFIG_LIBIPW_DEBUG=y
  
 -CONFIG_IPW2100=m
 -CONFIG_IPW2100_MONITOR=y
 +# CONFIG_IPW2100=m
 +# CONFIG_IPW2100_MONITOR=y
- # CONFIG_IPW2100_DEBUG is not set
+ # CONFIG_IPW2100_DEBUG=y
 -CONFIG_IPW2200=m
 -CONFIG_IPW2200_MONITOR=y
 -CONFIG_IPW2200_RADIOTAP=y
@@ -65,52 +96,119 @@ Index: compat-wireless-2009-03-13/config.mk
 +# CONFIG_IPW2200_RADIOTAP=y
 +# CONFIG_IPW2200_PROMISCUOUS=y
 +# CONFIG_IPW2200_QOS=y
- # CONFIG_IPW2200_DEBUG is not set
+ # CONFIG_IPW2200_DEBUG=y
  # The above enables use a second interface prefixed 'rtap'.
  #           Example usage:
-@@ -176,13 +176,13 @@ CONFIG_IPW2200_QOS=y
+@@ -190,27 +190,27 @@ CONFIG_IPW2200_QOS=y
+ #
  # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
  
- CONFIG_SSB_BLOCKIO=y
+-CONFIG_SSB_BLOCKIO=y
 -CONFIG_SSB_PCIHOST_POSSIBLE=y
 -CONFIG_SSB_PCIHOST=y
-+# CONFIG_SSB_PCIHOST_POSSIBLE=y
-+# CONFIG_SSB_PCIHOST=y
- CONFIG_SSB_B43_PCI_BRIDGE=y
+-CONFIG_SSB_B43_PCI_BRIDGE=y
 -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 -CONFIG_SSB_PCMCIAHOST=y
--CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
--CONFIG_SSB_DRIVER_PCICORE=y
++# CONFIG_SSB_BLOCKIO=y
++# CONFIG_SSB_PCIHOST_POSSIBLE=y
++# CONFIG_SSB_PCIHOST=y
++# CONFIG_SSB_B43_PCI_BRIDGE=y
 +# CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 +# CONFIG_SSB_PCMCIAHOST=y
+ # CONFIG_SSB_DEBUG=y
+-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+-CONFIG_SSB_DRIVER_PCICORE=y
 +# CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 +# CONFIG_SSB_DRIVER_PCICORE=y
  
  CONFIG_P54_PCI=m
  
-@@ -277,21 +277,21 @@ CONFIG_P54_COMMON=m
+-CONFIG_B44=m
+-CONFIG_B44_PCI_AUTOSELECT=y
+-CONFIG_B44_PCICORE_AUTOSELECT=y
+-CONFIG_B44_PCI=y
++# CONFIG_B44=m
++# CONFIG_B44_PCI_AUTOSELECT=y
++# CONFIG_B44_PCICORE_AUTOSELECT=y
++# CONFIG_B44_PCI=y
+-CONFIG_RTL8180=m
++# CONFIG_RTL8180=m
+-CONFIG_ADM8211=m
+-CONFIG_PCMCIA_ATMEL=m
++# CONFIG_ADM8211=m
++# CONFIG_PCMCIA_ATMEL=m
+ CONFIG_RT2X00_LIB_PCI=m
+ CONFIG_RT2400PCI=m
+@@ -226,16 +226,16 @@ CONFIG_RT61PCI=m
+ NEED_RT2X00_FIRMWARE=y
+ endif
+-CONFIG_ATMEL=m
+-CONFIG_PCI_ATMEL=m
++# CONFIG_ATMEL=m
++# CONFIG_PCI_ATMEL=m
+-CONFIG_MWL8K=m
++# CONFIG_MWL8K=m
+ endif
+ ## end of PCI
+ # This is required for some cards
+-CONFIG_EEPROM_93CX6=m
++# CONFIG_EEPROM_93CX6=m
+ # USB Drivers
+ ifneq ($(CONFIG_USB),)
+@@ -249,15 +249,15 @@ CONFIG_ZD1211RW=m
+ # is only wireless RNDIS chip known to date.
+ # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
+ # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
+-CONFIG_USB_NET_RNDIS_HOST=m
+-CONFIG_USB_NET_RNDIS_WLAN=m
+-CONFIG_USB_NET_CDCETHER=m
++# CONFIG_USB_NET_RNDIS_HOST=m
++# CONFIG_USB_NET_RNDIS_WLAN=m
++# CONFIG_USB_NET_CDCETHER=m
+ CONFIG_P54_USB=m
+-CONFIG_RTL8187=m
++# CONFIG_RTL8187=m
+-CONFIG_AT76C50X_USB=m
++# CONFIG_AT76C50X_USB=m
+ # RT2500USB does not require firmware
+ CONFIG_RT2500USB=m
+@@ -294,20 +294,20 @@ CONFIG_P54_COMMON=m
  # Sonics Silicon Backplane
- CONFIG_SSB_POSSIBLE=y
- CONFIG_SSB=m
+-CONFIG_SSB_POSSIBLE=y
+-CONFIG_SSB=m
 -CONFIG_SSB_SPROM=y
++# CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB=m
 +# CONFIG_SSB_SPROM=y
- # CONFIG_SSB_DEBUG is not set
+ # CONFIG_SSB_DEBUG=y
  
  ifneq ($(CONFIG_USB),)
  ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
- CONFIG_LIBERTAS_USB=m
+-CONFIG_LIBERTAS_USB=m
 -NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_USB=m
++# NEED_LIBERTAS=y
  endif
  endif
  ifneq ($(CONFIG_PCMCIA),)
- CONFIG_LIBERTAS_CS=m
+-CONFIG_LIBERTAS_CS=m
 -NEED_LIBERTAS=y
-+#NEED_LIBERTAS=y
++# CONFIG_LIBERTAS_CS=m
++# NEED_LIBERTAS=y
  endif
  ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS=m
-+#CONFIG_LIBERTAS=m
- # Libertas uses the old stack but not fully, it will soon 
- # be cleaned.
- endif
+ CONFIG_LIBERTAS=m
diff --git a/package/mac80211/patches/201-ath5k_eeprom.patch b/package/mac80211/patches/201-ath5k_eeprom.patch
deleted file mode 100644 (file)
index b42110d..0000000
+++ /dev/null
@@ -1,494 +0,0 @@
-Clean up the eeprom parsing code and prepare the pdgain
-data for 2413, which will be required for power calibration code.
-Also clean up some ugly line wrapping to make the code easier on
-the eyes.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/drivers/net/wireless/ath5k/eeprom.c
-+++ b/drivers/net/wireless/ath5k/eeprom.c
-@@ -541,31 +541,30 @@ ath5k_eeprom_read_freq_list(struct ath5k
- {
-       struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-       int o = *offset;
--      int i = 0;
-+      int i = 0 ;
-       u8 freq1, freq2;
-       int ret;
-       u16 val;
-+      ee->ee_n_piers[mode] = 0;
-       while(i < max) {
-               AR5K_EEPROM_READ(o++, val);
--              freq1 = (val >> 8) & 0xff;
--              freq2 = val & 0xff;
-+              freq1 = val & 0xff;
-+              if (!freq1)
-+                      break;
--              if (freq1) {
--                      pc[i++].freq = ath5k_eeprom_bin2freq(ee,
--                                      freq1, mode);
--                      ee->ee_n_piers[mode]++;
--              }
-+              pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-+                              freq1, mode);
-+              ee->ee_n_piers[mode]++;
--              if (freq2) {
--                      pc[i++].freq = ath5k_eeprom_bin2freq(ee,
--                                      freq2, mode);
--                      ee->ee_n_piers[mode]++;
--              }
--
--              if (!freq1 || !freq2)
-+              freq2 = (val >> 8) & 0xff;
-+              if (!freq2)
-                       break;
-+
-+              pc[i++].freq = ath5k_eeprom_bin2freq(ee,
-+                              freq2, mode);
-+              ee->ee_n_piers[mode]++;
-       }
-       /* return new offset */
-@@ -918,84 +917,46 @@ ath5k_cal_data_offset_2413(struct ath5k_
-  * curves on eeprom. The final curve (higher power) has an extra
-  * point for better accuracy like RF5112.
-  */
-+
- static int
--ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
-+ath5k_eeprom_parse_pcal_info_2413(struct ath5k_hw *ah, int mode, u32 offset,
-+                                  struct ath5k_chan_pcal_info *chinfo)
- {
-       struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
--      struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info;
--      struct ath5k_chan_pcal_info *gen_chan_info;
--      unsigned int i, c;
--      u32 offset;
-+      struct ath5k_chan_pcal_info_rf2413 *pcinfo;
-+      unsigned int i;
-       int ret;
-       u16 val;
--      u8 pd_gains = 0;
--
--      if (ee->ee_x_gain[mode] & 0x1) pd_gains++;
--      if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++;
--      if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++;
--      if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++;
--      ee->ee_pd_gains[mode] = pd_gains;
--
--      offset = ath5k_cal_data_offset_2413(ee, mode);
--      ee->ee_n_piers[mode] = 0;
--      switch (mode) {
--      case AR5K_EEPROM_MODE_11A:
--              if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
--                      return 0;
--
--              ath5k_eeprom_init_11a_pcal_freq(ah, offset);
--              offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
--              gen_chan_info = ee->ee_pwr_cal_a;
--              break;
--      case AR5K_EEPROM_MODE_11B:
--              if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
--                      return 0;
-+      u8 pd_gains;
--              ath5k_eeprom_init_11bg_2413(ah, mode, offset);
--              offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
--              gen_chan_info = ee->ee_pwr_cal_b;
--              break;
--      case AR5K_EEPROM_MODE_11G:
--              if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
--                      return 0;
--
--              ath5k_eeprom_init_11bg_2413(ah, mode, offset);
--              offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
--              gen_chan_info = ee->ee_pwr_cal_g;
--              break;
--      default:
--              return -EINVAL;
--      }
-+      pd_gains = ee->ee_pd_gains[mode];
-       if (pd_gains == 0)
-               return 0;
-       for (i = 0; i < ee->ee_n_piers[mode]; i++) {
--              chan_pcal_info = &gen_chan_info[i].rf2413_info;
-+              pcinfo = &chinfo[i].rf2413_info;
-               /*
-                * Read pwr_i, pddac_i and the first
-                * 2 pd points (pwr, pddac)
-                */
-               AR5K_EEPROM_READ(offset++, val);
--              chan_pcal_info->pwr_i[0] = val & 0x1f;
--              chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f;
--              chan_pcal_info->pwr[0][0] =
--                                      (val >> 12) & 0xf;
-+              pcinfo->pwr_i[0] = val & 0x1f;
-+              pcinfo->pddac_i[0] = (val >> 5) & 0x7f;
-+              pcinfo->pwr[0][0] = (val >> 12) & 0xf;
-               AR5K_EEPROM_READ(offset++, val);
--              chan_pcal_info->pddac[0][0] = val & 0x3f;
--              chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf;
--              chan_pcal_info->pddac[0][1] =
--                                      (val >> 10) & 0x3f;
-+              pcinfo->pddac[0][0] = val & 0x3f;
-+              pcinfo->pwr[0][1] = (val >> 6) & 0xf;
-+              pcinfo->pddac[0][1] = (val >> 10) & 0x3f;
-               AR5K_EEPROM_READ(offset++, val);
--              chan_pcal_info->pwr[0][2] = val & 0xf;
--              chan_pcal_info->pddac[0][2] =
--                                      (val >> 4) & 0x3f;
-+              pcinfo->pwr[0][2] = val & 0xf;
-+              pcinfo->pddac[0][2] = (val >> 4) & 0x3f;
--              chan_pcal_info->pwr[0][3] = 0;
--              chan_pcal_info->pddac[0][3] = 0;
-+              pcinfo->pwr[0][3] = 0;
-+              pcinfo->pddac[0][3] = 0;
-               if (pd_gains > 1) {
-                       /*
-@@ -1003,44 +964,36 @@ ath5k_eeprom_read_pcal_info_2413(struct 
-                        * so it only has 2 pd points.
-                        * Continue wih pd gain 1.
-                        */
--                      chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f;
-+                      pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
--                      chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1;
-+                      pcinfo->pddac_i[1] = (val >> 15) & 0x1;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1;
-+                      pcinfo->pddac_i[1] |= (val & 0x3F) << 1;
--                      chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf;
--                      chan_pcal_info->pddac[1][0] =
--                                              (val >> 10) & 0x3f;
-+                      pcinfo->pwr[1][0] = (val >> 6) & 0xf;
-+                      pcinfo->pddac[1][0] = (val >> 10) & 0x3f;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pwr[1][1] = val & 0xf;
--                      chan_pcal_info->pddac[1][1] =
--                                              (val >> 4) & 0x3f;
--                      chan_pcal_info->pwr[1][2] =
--                                              (val >> 10) & 0xf;
-+                      pcinfo->pwr[1][1] = val & 0xf;
-+                      pcinfo->pddac[1][1] = (val >> 4) & 0x3f;
-+                      pcinfo->pwr[1][2] = (val >> 10) & 0xf;
--                      chan_pcal_info->pddac[1][2] =
--                                              (val >> 14) & 0x3;
-+                      pcinfo->pddac[1][2] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac[1][2] |=
--                                              (val & 0xF) << 2;
-+                      pcinfo->pddac[1][2] |= (val & 0xF) << 2;
--                      chan_pcal_info->pwr[1][3] = 0;
--                      chan_pcal_info->pddac[1][3] = 0;
-+                      pcinfo->pwr[1][3] = 0;
-+                      pcinfo->pddac[1][3] = 0;
-               } else if (pd_gains == 1) {
-                       /*
-                        * Pd gain 0 is the last one so
-                        * read the extra point.
-                        */
--                      chan_pcal_info->pwr[0][3] =
--                                              (val >> 10) & 0xf;
-+                      pcinfo->pwr[0][3] = (val >> 10) & 0xf;
--                      chan_pcal_info->pddac[0][3] =
--                                              (val >> 14) & 0x3;
-+                      pcinfo->pddac[0][3] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac[0][3] |=
--                                              (val & 0xF) << 2;
-+                      pcinfo->pddac[0][3] |= (val & 0xF) << 2;
-               }
-               /*
-@@ -1048,105 +1001,159 @@ ath5k_eeprom_read_pcal_info_2413(struct 
-                * as above.
-                */
-               if (pd_gains > 2) {
--                      chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f;
--                      chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f;
-+                      pcinfo->pwr_i[2] = (val >> 4) & 0x1f;
-+                      pcinfo->pddac_i[2] = (val >> 9) & 0x7f;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pwr[2][0] =
--                                              (val >> 0) & 0xf;
--                      chan_pcal_info->pddac[2][0] =
--                                              (val >> 4) & 0x3f;
--                      chan_pcal_info->pwr[2][1] =
--                                              (val >> 10) & 0xf;
--
--                      chan_pcal_info->pddac[2][1] =
--                                              (val >> 14) & 0x3;
--                      AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac[2][1] |=
--                                              (val & 0xF) << 2;
--
--                      chan_pcal_info->pwr[2][2] =
--                                              (val >> 4) & 0xf;
--                      chan_pcal_info->pddac[2][2] =
--                                              (val >> 8) & 0x3f;
-+                      pcinfo->pwr[2][0] = (val >> 0) & 0xf;
-+                      pcinfo->pddac[2][0] = (val >> 4) & 0x3f;
-+                      pcinfo->pwr[2][1] = (val >> 10) & 0xf;
--                      chan_pcal_info->pwr[2][3] = 0;
--                      chan_pcal_info->pddac[2][3] = 0;
-+                      pcinfo->pddac[2][1] = (val >> 14) & 0x3;
-+                      AR5K_EEPROM_READ(offset++, val);
-+                      pcinfo->pddac[2][1] |= (val & 0xF) << 2;
-+
-+                      pcinfo->pwr[2][2] = (val >> 4) & 0xf;
-+                      pcinfo->pddac[2][2] = (val >> 8) & 0x3f;
-+
-+                      pcinfo->pwr[2][3] = 0;
-+                      pcinfo->pddac[2][3] = 0;
-               } else if (pd_gains == 2) {
--                      chan_pcal_info->pwr[1][3] =
--                                              (val >> 4) & 0xf;
--                      chan_pcal_info->pddac[1][3] =
--                                              (val >> 8) & 0x3f;
-+                      pcinfo->pwr[1][3] = (val >> 4) & 0xf;
-+                      pcinfo->pddac[1][3] = (val >> 8) & 0x3f;
-               }
-               if (pd_gains > 3) {
--                      chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3;
-+                      pcinfo->pwr_i[3] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
-+                      pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2;
--                      chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f;
--                      chan_pcal_info->pwr[3][0] =
--                                              (val >> 10) & 0xf;
--                      chan_pcal_info->pddac[3][0] =
--                                              (val >> 14) & 0x3;
-+                      pcinfo->pddac_i[3] = (val >> 3) & 0x7f;
-+                      pcinfo->pwr[3][0] = (val >> 10) & 0xf;
-+                      pcinfo->pddac[3][0] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac[3][0] |=
--                                              (val & 0xF) << 2;
--                      chan_pcal_info->pwr[3][1] =
--                                              (val >> 4) & 0xf;
--                      chan_pcal_info->pddac[3][1] =
--                                              (val >> 8) & 0x3f;
-+                      pcinfo->pddac[3][0] |= (val & 0xF) << 2;
-+                      pcinfo->pwr[3][1] = (val >> 4) & 0xf;
-+                      pcinfo->pddac[3][1] = (val >> 8) & 0x3f;
--                      chan_pcal_info->pwr[3][2] =
--                                              (val >> 14) & 0x3;
-+                      pcinfo->pwr[3][2] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pwr[3][2] |=
--                                              ((val >> 0) & 0x3) << 2;
-+                      pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2;
--                      chan_pcal_info->pddac[3][2] =
--                                              (val >> 2) & 0x3f;
--                      chan_pcal_info->pwr[3][3] =
--                                              (val >> 8) & 0xf;
-+                      pcinfo->pddac[3][2] = (val >> 2) & 0x3f;
-+                      pcinfo->pwr[3][3] = (val >> 8) & 0xf;
--                      chan_pcal_info->pddac[3][3] =
--                                              (val >> 12) & 0xF;
-+                      pcinfo->pddac[3][3] = (val >> 12) & 0xF;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pddac[3][3] |=
--                                              ((val >> 0) & 0x3) << 4;
-+                      pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4;
-               } else if (pd_gains == 3) {
--                      chan_pcal_info->pwr[2][3] =
--                                              (val >> 14) & 0x3;
-+                      pcinfo->pwr[2][3] = (val >> 14) & 0x3;
-                       AR5K_EEPROM_READ(offset++, val);
--                      chan_pcal_info->pwr[2][3] |=
--                                              ((val >> 0) & 0x3) << 2;
-+                      pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2;
--                      chan_pcal_info->pddac[2][3] =
--                                              (val >> 2) & 0x3f;
-+                      pcinfo->pddac[2][3] = (val >> 2) & 0x3f;
-               }
-+      }
-+      return 0;
-+}
-+
-+static int
-+ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode,
-+                                    struct ath5k_chan_pcal_info *chinfo,
-+                                    unsigned int *xgains)
-+{
-+      struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+      struct ath5k_chan_pcal_info_rf2413 *pcinfo;
-+      unsigned int i, j, k;
--              for (c = 0; c < pd_gains; c++) {
--                      /* Recreate pwr table for this channel using pwr steps */
--                      chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2;
--                      chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0];
--                      chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1];
--                      chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2];
--                      if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2])
--                              chan_pcal_info->pwr[c][3] = 0;
--
--                      /* Recreate pddac table for this channel using pddac steps */
--                      chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c];
--                      chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0];
--                      chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1];
--                      chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2];
--                      if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2])
--                              chan_pcal_info->pddac[c][3] = 0;
-+      /* prepare the raw values */
-+      for (i = 0; i < ee->ee_n_piers[mode]; i++) {
-+              pcinfo = &chinfo[i].rf2413_info;
-+              for (j = 0; j < ee->ee_pd_gains[mode]; j++) {
-+                      unsigned int idx = xgains[j];
-+                      struct ath5k_pdgain_info *pd = &pcinfo->pdgains[idx];
-+
-+                      /* one more point for the highest power (lowest gain) */
-+                      if (j == ee->ee_pd_gains[mode] - 1) {
-+                              pd->n_vpd = AR5K_EEPROM_N_PD_POINTS;
-+                      } else {
-+                              pd->n_vpd = AR5K_EEPROM_N_PD_POINTS - 1;
-+                      }
-+
-+                      pd->vpd[0] = pcinfo->pddac_i[j];
-+                      pd->pwr_t4[0] = 4 * pcinfo->pwr_i[j];
-+                      for (k = 1; k < pd->n_vpd; k++) {
-+                              pd->pwr_t4[k] = pd->pwr_t4[k - 1] + 2 * pcinfo->pwr[j][k - 1];
-+                              pd->vpd[k] = pd->vpd[k - 1] + pcinfo->pddac[j][k - 1];
-+                      }
-               }
-       }
-       return 0;
- }
-+static int
-+ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
-+{
-+      struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+      struct ath5k_chan_pcal_info *chinfo;
-+      unsigned int xgains[AR5K_EEPROM_N_PD_GAINS];
-+      u32 offset;
-+      u8 pd_gains = 0;
-+      int i, ret;
-+
-+      memset(xgains, 0, sizeof(xgains));
-+      for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) {
-+              int idx = AR5K_EEPROM_N_PD_GAINS - i - 1;
-+
-+              if ((ee->ee_x_gain[mode] >> idx) & 0x1)
-+                      xgains[pd_gains++] = idx;
-+      }
-+      ee->ee_pd_gains[mode] = pd_gains;
-+
-+      offset = ath5k_cal_data_offset_2413(ee, mode);
-+      switch (mode) {
-+      case AR5K_EEPROM_MODE_11A:
-+              if (!AR5K_EEPROM_HDR_11A(ee->ee_header))
-+                      return 0;
-+
-+              ath5k_eeprom_init_11a_pcal_freq(ah, offset);
-+              offset += AR5K_EEPROM_N_5GHZ_CHAN / 2;
-+              chinfo = ee->ee_pwr_cal_a;
-+              break;
-+      case AR5K_EEPROM_MODE_11B:
-+              if (!AR5K_EEPROM_HDR_11B(ee->ee_header))
-+                      return 0;
-+
-+              ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-+              offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-+              chinfo = ee->ee_pwr_cal_b;
-+              break;
-+      case AR5K_EEPROM_MODE_11G:
-+              if (!AR5K_EEPROM_HDR_11G(ee->ee_header))
-+                      return 0;
-+
-+              ath5k_eeprom_init_11bg_2413(ah, mode, offset);
-+              offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2;
-+              chinfo = ee->ee_pwr_cal_g;
-+              break;
-+      default:
-+              return -EINVAL;
-+      }
-+
-+
-+      ret = ath5k_eeprom_parse_pcal_info_2413(ah, mode, offset, chinfo);
-+      if (ret)
-+              return ret;
-+
-+      ret = ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo, xgains);
-+      if (ret)
-+              return ret;
-+
-+      return 0;
-+}
-+
- /*
-  * Read per rate target power (this is the maximum tx power
-  * supported by the card). This info is used when setting
-@@ -1264,6 +1271,7 @@ ath5k_eeprom_read_pcal_info(struct ath5k
-       else
-               read_pcal = ath5k_eeprom_read_pcal_info_5111;
-+
-       for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) {
-               err = read_pcal(ah, mode);
-               if (err)
---- a/drivers/net/wireless/ath5k/eeprom.h
-+++ b/drivers/net/wireless/ath5k/eeprom.h
-@@ -266,15 +266,27 @@ struct ath5k_chan_pcal_info_rf5112 {
-       u8      pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
- };
-+
-+struct ath5k_pdgain_info {
-+      u16 n_vpd;
-+      u16 vpd[AR5K_EEPROM_N_PD_POINTS];
-+      s16 pwr_t4[AR5K_EEPROM_N_PD_POINTS];
-+};
-+
- struct ath5k_chan_pcal_info_rf2413 {
-+      /* --- EEPROM VALUES --- */
-       /* Starting pwr/pddac values */
--      s8              pwr_i[AR5K_EEPROM_N_PD_GAINS];
--      u8      pddac_i[AR5K_EEPROM_N_PD_GAINS];
-+      s8 pwr_i[AR5K_EEPROM_N_PD_GAINS];
-+      u8 pddac_i[AR5K_EEPROM_N_PD_GAINS];
-       /* (pwr,pddac) points */
--      s8              pwr[AR5K_EEPROM_N_PD_GAINS]
--                              [AR5K_EEPROM_N_PD_POINTS];
--      u8      pddac[AR5K_EEPROM_N_PD_GAINS]
--                              [AR5K_EEPROM_N_PD_POINTS];
-+      s8 pwr[AR5K_EEPROM_N_PD_GAINS]
-+            [AR5K_EEPROM_N_PD_POINTS];
-+      u8 pddac[AR5K_EEPROM_N_PD_GAINS]
-+              [AR5K_EEPROM_N_PD_POINTS];
-+
-+      /* --- RAW VALUES --- */
-+      struct ath5k_pdgain_info pdgains
-+              [AR5K_EEPROM_N_PD_GAINS];
- };
- struct ath5k_chan_pcal_info {
diff --git a/package/mac80211/patches/202-ath5k_txpower_2413.patch b/package/mac80211/patches/202-ath5k_txpower_2413.patch
deleted file mode 100644 (file)
index ddecd9e..0000000
+++ /dev/null
@@ -1,672 +0,0 @@
-Implement the power curve interpolation, which is required for
-proper tx on 2413 and newer RF designs.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/drivers/net/wireless/ath5k/phy.c
-+++ b/drivers/net/wireless/ath5k/phy.c
-@@ -4,6 +4,7 @@
-  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
-  * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
-  * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
-+ * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org>
-  *
-  * Permission to use, copy, modify, and distribute this software for any
-  * purpose with or without fee is hereby granted, provided that the above
-@@ -1438,31 +1439,449 @@ unsigned int ath5k_hw_get_def_antenna(st
-  */
- /*
-- * Initialize the tx power table (not fully implemented)
-+ * find the lower and upper index of the values in the table surrounding the target value
-  */
--static void ath5k_txpower_table(struct ath5k_hw *ah,
--              struct ieee80211_channel *channel, s16 max_power)
-+static void
-+ath5k_get_table_index(const u16 *tbl, unsigned int tbl_sz, u16 target,
-+                      unsigned int idx[2])
- {
--      unsigned int i, min, max, n;
--      u16 txpower, *rates;
-+      const u16 *ti;
--      rates = ah->ah_txpower.txp_rates;
-+      if (target < tbl[0]) {
-+              idx[0] = idx[1] = 0;
-+              return;
-+      }
-+
-+      if (target > tbl[tbl_sz - 1]) {
-+              idx[0] = idx[1] = tbl_sz - 1;
-+              return;
-+      }
-+
-+      /* look for the surrounding values */
-+      for (ti = tbl; ti < &tbl[tbl_sz - 1]; ti++) {
-+
-+              /* if the value is equal to the target, set lo = hi = index */
-+              if (*ti == target) {
-+                      idx[0] = idx[1] = ti - tbl;
-+                      return;
-+              }
-+
-+              /* if the target is between the current value and the next one,
-+               * set lo = cur, hi = lo + 1 */
-+              if (target < ti[1]) {
-+                      idx[0] = ti - tbl;
-+                      idx[1] = idx[0] + 1;
-+                      return;
-+              }
-+      }
-+}
-+
-+/* find the lower and upper frequency info */
-+static void
-+ath5k_get_freq_tables(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-+                     struct ath5k_chan_pcal_info **pcinfo_l,
-+                     struct ath5k_chan_pcal_info **pcinfo_r,
-+                     struct ath5k_rate_pcal_info *rates)
-+{
-+      struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-+      struct ath5k_chan_pcal_info *pcinfo;
-+      unsigned int idx_l, idx_r;
-+      int mode, max, i;
-+      unsigned int target = channel->center_freq;
-+      struct ath5k_rate_pcal_info *rpinfo;
-+
-+      if (!(channel->hw_value & CHANNEL_OFDM)) {
-+              pcinfo = ee->ee_pwr_cal_b;
-+              rpinfo = ee->ee_rate_tpwr_b;
-+              mode = AR5K_EEPROM_MODE_11B;
-+      } else if (channel->hw_value & CHANNEL_2GHZ) {
-+              pcinfo = ee->ee_pwr_cal_g;
-+              rpinfo = ee->ee_rate_tpwr_g;
-+              mode = AR5K_EEPROM_MODE_11G;
-+      } else {
-+              pcinfo = ee->ee_pwr_cal_a;
-+              rpinfo = ee->ee_rate_tpwr_a;
-+              mode = AR5K_EEPROM_MODE_11A;
-+      }
-+      max = ee->ee_n_piers[mode] - 1;
-+
-+      if (target < pcinfo[0].freq) {
-+              idx_l = idx_r = 0;
-+              goto done;
-+      }
-+
-+      if (target > pcinfo[max].freq) {
-+              idx_l = idx_r = max;
-+              goto done;
-+      }
-+
-+      /* look for the surrounding values */
-+      for (i = 0; i <= max; i++) {
-+
-+              /* if the value is equal to the target, set lo = hi = index */
-+              if (pcinfo[i].freq == target) {
-+                      idx_l = idx_r = i;
-+                      goto done;
-+              }
-+
-+              /* if the target is between the current value and the next one,
-+               * set lo = cur, hi = lo + 1 */
-+              if (target < pcinfo[i].freq) {
-+                      idx_l = i;
-+                      idx_r = idx_l + 1;
-+                      goto done;
-+              }
-+      }
-+
-+done:
-+      *pcinfo_l = &pcinfo[idx_l];
-+      *pcinfo_r = &pcinfo[idx_r];
-+
-+      if (!rates)
-+              return;
-+
-+      /* rate info minimum values */
-+      rates->freq = channel->center_freq;
-+      rates->target_power_6to24 =
-+              min(rpinfo[idx_l].target_power_6to24,
-+                  rpinfo[idx_r].target_power_6to24);
-+      rates->target_power_36 =
-+              min(rpinfo[idx_l].target_power_36,
-+                  rpinfo[idx_r].target_power_36);
-+      rates->target_power_48 =
-+              min(rpinfo[idx_l].target_power_48,
-+                  rpinfo[idx_r].target_power_48);
-+      rates->target_power_54 =
-+              min(rpinfo[idx_l].target_power_54,
-+                  rpinfo[idx_r].target_power_54);
-+}
-+
-+
-+/* Fill the VPD table for all indices between pmin and pmax */
-+static void
-+ath5k_fill_vpdtable(s16 pmin, s16 pmax, const s16 *pwr,
-+                    const u16 *vpd, unsigned int intercepts,
-+                    u16 vpdtable[AR5K_EEPROM_POWER_TABLE_SIZE])
-+{
-+      unsigned int idx[2] = { 0, 0 };
-+      s16 cur_pwr = 2 * pmin;
-+      int i;
-+
-+      if (intercepts < 2)
-+              return;
-+
-+      for(i = 0; i <= (pmax - pmin); i++) {
-+              ath5k_get_table_index(pwr, intercepts, cur_pwr, idx);
-+
-+              if (!idx[1])
-+                      idx[1] = 1;
-+
-+              if (idx[0] == intercepts - 1)
-+                      idx[0] = intercepts - 2;
-+
-+              if (pwr[idx[0]] == pwr[idx[1]])
-+                      vpdtable[i] = vpd[idx[0]];
-+              else
-+                      vpdtable[i] = (((cur_pwr - pwr[idx[0]]) * vpd[idx[1]] +
-+                                      (pwr[idx[1]] - cur_pwr) * vpd[idx[0]]) /
-+                                         (pwr[idx[1]] - pwr[idx[0]]));
-+
-+              cur_pwr += 2;
-+      }
-+}
-+
-+static inline s16
-+ath5k_interpolate_signed(u16 ref, u16 ref_l, u16 ref_r, s16 val_l, s16 val_r)
-+{
-+      if (ref_l == ref_r)
-+              return val_l;
-+
-+      return ((ref - ref_l)*val_r + (ref_r - ref)*val_l) / (ref_r - ref_l);
-+}
-+
-+static inline s16
-+ath5k_get_min_power_2413(struct ath5k_chan_pcal_info *pcinfo)
-+{
-+      struct ath5k_pdgain_info *pd;
-+      int i;
-+
-+      /* backwards - highest pdgain == lowest power */
-+      for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) {
-+              pd = &pcinfo->rf2413_info.pdgains[i];
-+              if (!pd->n_vpd)
-+                      continue;
-+
-+              return pd->pwr_t4[0];
-+      }
-+      return 0;
-+}
-+
-+static inline s16
-+ath5k_get_max_power_2413(struct ath5k_chan_pcal_info *pcinfo)
-+{
-+      struct ath5k_pdgain_info *pd;
-+      int i;
-+
-+      /* forwards: lowest pdgain == highest power */
-+      for (i = 0; i < AR5K_EEPROM_N_PD_GAINS; i++) {
-+              pd = &pcinfo->rf2413_info.pdgains[i];
-+              if (!pd->n_vpd)
-+                      continue;
-+
-+              return pd->pwr_t4[pd->n_vpd];
-+      }
-+      return 0;
-+}
-+
-+
-+
-+static int
-+ath5k_txpower_table_2413(struct ath5k_hw *ah, struct ieee80211_channel *ch,
-+                         struct ath5k_chan_pcal_info *pcinfo_l,
-+                         struct ath5k_chan_pcal_info *pcinfo_r)
-+{
-+      struct ath5k_pdgain_info *pd_l, *pd_r;
-+      u16 gain_boundaries[4];
-+      u16 *xpd = ah->ah_txpower.txp_xpd;
-+      int n_xpd = 0;
-+      s16 pmin_t2[AR5K_EEPROM_N_PD_GAINS];
-+      s16 pmax_t2[AR5K_EEPROM_N_PD_GAINS];
-+      u16 *pdadc_out = ah->ah_txpower.txp_pcdac;
-+      unsigned int gain_overlap;
-+      unsigned int vpd_size, target_idx, max_idx;
-+      unsigned int n_pdadc = 0;
-+      u16 vpd_step;
-+      u16 *pcdacL;
-+      u16 *pcdacR;
-+      int i, j, s;
-+      u32 reg;
-+      s16 ch_pmin, ch_pmax;
-+
-+      gain_overlap = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) &
-+              AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP;
-+
-+      /* loop backwards over pdgains (highest pdgain == lowest power) */
-+      for (i = AR5K_EEPROM_N_PD_GAINS - 1; i >= 0; i--) {
-+              pd_l = &pcinfo_l->rf2413_info.pdgains[i];
-+              pd_r = &pcinfo_r->rf2413_info.pdgains[i];
-+              pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[n_xpd];
-+              pcdacR = ah->ah_txpower.txp_rfdata.rf2413.pcdacR[n_xpd];
-+
-+              if (!pd_l->n_vpd)
-+                      continue;
-+
-+              xpd[n_xpd] = i;
-+
-+              pmin_t2[n_xpd] = min(pd_l->pwr_t4[0], pd_r->pwr_t4[0]) / 2;
-+              pmax_t2[n_xpd] = min(pd_l->pwr_t4[pd_l->n_vpd - 1],
-+                      pd_r->pwr_t4[pd_r->n_vpd - 1]) / 2;
-+
-+              if ((u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]) > 64)
-+                      continue;
-+
-+              /* fill vpd tables for left and right frequency info */
-+              ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd],
-+                      pd_l->pwr_t4, pd_l->vpd, pd_l->n_vpd, pcdacL);
-+
-+              /* check if interpolation is necessary */
-+              if (pcinfo_l == pcinfo_r)
-+                      continue;
-+
-+              ath5k_fill_vpdtable(pmin_t2[n_xpd], pmax_t2[n_xpd],
-+                      pd_r->pwr_t4, pd_r->vpd, pd_r->n_vpd, pcdacR);
-+
-+              /* interpolate pcdac values,
-+               * reuse pcdacL table for interpolation output */
-+              for (j = 0; j < (u16) (pmax_t2[n_xpd] - pmin_t2[n_xpd]); j++) {
-+                      pcdacL[j] = ath5k_interpolate_signed(ch->center_freq,
-+                                      pcinfo_l->freq, pcinfo_r->freq,
-+                                      (s16) pcdacL[j], (s16) pcdacR[j]);
-+              }
-+              n_xpd++;
-+      }
-+
-+      if (!n_xpd)
-+              return 0;
-+
-+      /* create final table */
-+      for (i = 0, n_pdadc = 0; i < n_xpd; i++) {
-+              pcdacL = ah->ah_txpower.txp_rfdata.rf2413.pcdacL[i];
-+
-+              if (i == n_xpd - 1) {
-+                      /* 2 db boundary stretch */
-+                      gain_boundaries[i] = pmax_t2[i] + 4;
-+              } else {
-+                      gain_boundaries[i] = (pmax_t2[i] + pmin_t2[i + 1]) / 2;
-+              }
-+
-+              if (gain_boundaries[i] > AR5K_TUNE_MAX_TXPOWER)
-+                      gain_boundaries[i] = AR5K_TUNE_MAX_TXPOWER;
-+
-+              /* find starting index */
-+              if (i == 0)
-+                      s = 0;
-+              else
-+                      s = (gain_boundaries[i - 1] - pmin_t2[i]) -
-+                              gain_overlap;
-+
-+              if (pcdacL[1] > pcdacL[0])
-+                      vpd_step = pcdacL[1] - pcdacL[0];
-+              else
-+                      vpd_step = 1;
-+
-+              /* if s is below 0, we need to extrapolate below this pdgain */
-+              while ((s < 0) && (n_pdadc < 128)) {
-+                      s16 tmp = pcdacL[0] + s * vpd_step;
-+                      pdadc_out[n_pdadc++] = (u16) ((tmp < 0) ? 0 : tmp);
-+                      s++;
-+              }
-+
-+              vpd_size = pmax_t2[i] - pmin_t2[i];
-+              target_idx = gain_boundaries[i] + gain_overlap - pmin_t2[i];
-+              max_idx = (target_idx < vpd_size) ? target_idx : vpd_size;
-+
-+              while ((s < (s16) max_idx) && (n_pdadc < 128))
-+                      pdadc_out[n_pdadc++] = pcdacL[s++];
-+
-+              /* need to extrapolate above this pdgain? */
-+              if (target_idx <= max_idx)
-+                      continue;
--      txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2;
--      if (max_power > txpower)
--              txpower = max_power > AR5K_TUNE_MAX_TXPOWER ?
--                  AR5K_TUNE_MAX_TXPOWER : max_power;
-+              if (pcdacL[vpd_size - 1] > pcdacL[vpd_size - 2])
-+                      vpd_step = pcdacL[vpd_size - 1] - pcdacL[vpd_size - 2];
-+              else
-+                      vpd_step = 1;
--      for (i = 0; i < AR5K_MAX_RATES; i++)
--              rates[i] = txpower;
-+              while ((s < (s16) target_idx) && (n_pdadc < 128)) {
-+                      int tmp = pcdacL[vpd_size - 1] +
-+                              (s - max_idx) * vpd_step;
-+                      pdadc_out[n_pdadc++] = (tmp > 127) ? 127 : tmp;
-+                      s++;
-+              }
-+      }
--      /* XXX setup target powers by rate */
-+      while (i < AR5K_EEPROM_N_PD_GAINS) {
-+              gain_boundaries[i] = gain_boundaries[i - 1];
-+              i++;
-+      }
-+
-+      while (n_pdadc < 128) {
-+              pdadc_out[n_pdadc] = pdadc_out[n_pdadc - 1];
-+              n_pdadc++;
-+      }
-+
-+      /* select the right xpdgain curves */
-+      reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1);
-+      reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 |
-+               AR5K_PHY_TPC_RG1_PDGAIN_2 |
-+               AR5K_PHY_TPC_RG1_PDGAIN_3 |
-+               AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
-+      reg |= AR5K_REG_SM(n_xpd, AR5K_PHY_TPC_RG1_NUM_PD_GAIN);
-+      switch(n_xpd) {
-+      case 3:
-+              reg |= AR5K_REG_SM(xpd[2], AR5K_PHY_TPC_RG1_PDGAIN_3);
-+              /* fall through */
-+      case 2:
-+              reg |= AR5K_REG_SM(xpd[1], AR5K_PHY_TPC_RG1_PDGAIN_2);
-+              /* fall through */
-+      case 1:
-+              reg |= AR5K_REG_SM(xpd[0], AR5K_PHY_TPC_RG1_PDGAIN_1);
-+              break;
-+      }
-+      ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1);
-+      /*
-+       * Write TX power values
-+       */
-+      reg = AR5K_PHY_PDADC_TXPOWER_BASE;
-+      for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
-+              ath5k_hw_reg_write(ah,
-+                      ((pdadc_out[4*i + 0] & 0xff) << 0) |
-+                      ((pdadc_out[4*i + 1] & 0xff) << 8) |
-+                      ((pdadc_out[4*i + 2] & 0xff) << 16) |
-+                      ((pdadc_out[4*i + 3] & 0xff) << 24), reg);
-+              reg += 4;
-+      }
-+
-+      ath5k_hw_reg_write(ah,
-+              AR5K_REG_SM(gain_overlap,
-+                      AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) |
-+              AR5K_REG_SM(gain_boundaries[0],
-+                      AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) |
-+              AR5K_REG_SM(gain_boundaries[1],
-+                      AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) |
-+              AR5K_REG_SM(gain_boundaries[2],
-+                      AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) |
-+              AR5K_REG_SM(gain_boundaries[3],
-+                      AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4),
-+              AR5K_PHY_TPC_RG5);
-+
-+      ah->ah_txpower.txp_offset = pmin_t2[0];
-+
-+      /* look up power boundaries for this channel */
-+      ch_pmin = ath5k_get_min_power_2413(pcinfo_l);
-+      ch_pmax = ath5k_get_max_power_2413(pcinfo_l);
-+
-+      if (pcinfo_l != pcinfo_r) {
-+              s16 pwr_r;
-+
-+              pwr_r = ath5k_get_min_power_2413(pcinfo_r);
-+              ch_pmin = ath5k_interpolate_signed(ch->center_freq,
-+                                      pcinfo_l->freq, pcinfo_r->freq,
-+                                      ch_pmin, pwr_r);
-+
-+              pwr_r = ath5k_get_max_power_2413(pcinfo_r);
-+              ch_pmax = ath5k_interpolate_signed(ch->center_freq,
-+                                      pcinfo_l->freq, pcinfo_r->freq,
-+                                      ch_pmax, pwr_r);
-+      }
-+      ah->ah_txpower.txp_min = ch_pmin;
-+      ah->ah_txpower.txp_max = ch_pmax;
-+
-+      return 0;
-+}
-+
-+static void
-+ath5k_setup_rate_table(struct ath5k_hw *ah, u16 max_pwr,
-+                       struct ath5k_rate_pcal_info *rate_info)
-+{
-+      unsigned int i;
-+      u16 *rates;
-+
-+      max_pwr *= 2;
-+      max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max);
-+
-+      /* apply rate limits */
-+      rates = ah->ah_txpower.txp_rates;
-+      for (i = 0; i < 5; i++) {
-+              rates[i] = min(max_pwr, rate_info->target_power_6to24);
-+      }
-+      rates[5] = min(rates[0], rate_info->target_power_36);
-+      rates[6] = min(rates[0], rate_info->target_power_48);
-+      rates[7] = min(rates[0], rate_info->target_power_54);
-+      rates[8] = min(rates[0], rate_info->target_power_6to24);
-+      rates[9] = min(rates[0], rate_info->target_power_36);
-+      rates[10] = min(rates[0], rate_info->target_power_36);
-+      rates[11] = min(rates[0], rate_info->target_power_48);
-+      rates[12] = min(rates[0], rate_info->target_power_48);
-+      rates[13] = min(rates[0], rate_info->target_power_54);
-+      rates[14] = min(rates[0], rate_info->target_power_54);
-+
-+      ah->ah_txpower.txp_tpc = max_pwr;
-       ah->ah_txpower.txp_min = rates[7];
--      ah->ah_txpower.txp_max = rates[0];
--      ah->ah_txpower.txp_ofdm = rates[0];
-+      ah->ah_txpower.txp_max = min(ah->ah_txpower.txp_max,
-+              (s16) rate_info->target_power_36);
-+      ah->ah_txpower.txp_ofdm = ah->ah_txpower.txp_max;
-+}
-+
-+static int
-+ath5k_txpower_table(struct ath5k_hw *ah, struct ieee80211_channel *ch,
-+                    struct ath5k_chan_pcal_info *pcinfo_l,
-+                    struct ath5k_chan_pcal_info *pcinfo_r,
-+                                      u16 max_pwr)
-+{
-+      unsigned int i, min, max, n;
--      /* Calculate the power table */
-       n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac);
-       min = AR5K_EEPROM_PCDAC_START;
-       max = AR5K_EEPROM_PCDAC_STOP;
-@@ -1473,51 +1892,64 @@ static void ath5k_txpower_table(struct a
- #else
-               min;
- #endif
-+
-+      /*
-+       * Write TX power values
-+       */
-+      for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
-+              ath5k_hw_reg_write(ah,
-+                      ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) |
-+                              0xff) & 0xffff) << 16) |
-+                       (((ah->ah_txpower.txp_pcdac[(i << 1)    ] << 8) |
-+                              0xff) & 0xffff),
-+                      AR5K_PHY_PCDAC_TXPOWER(i));
-+      }
-+      return 0;
- }
-+
- /*
-  * Set transmition power
-  */
--int /*O.K. - txpower_table is unimplemented so this doesn't work*/
-+int
- ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-               unsigned int txpower)
- {
-+      struct ath5k_chan_pcal_info *pcinfo_l, *pcinfo_r;
-+      struct ath5k_rate_pcal_info rate_info;
-       bool tpc = ah->ah_txpower.txp_tpc;
--      unsigned int i;
-       ATH5K_TRACE(ah->ah_sc);
-       if (txpower > AR5K_TUNE_MAX_TXPOWER) {
-               ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
-               return -EINVAL;
-       }
--
--      /*
--       * RF2413 for some reason can't
--       * transmit anything if we call
--       * this funtion, so we skip it
--       * until we fix txpower.
--       *
--       * XXX: Assume same for RF2425
--       * to be safe.
--       */
--      if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425))
--              return 0;
-+      if (txpower == 0)
-+              txpower = AR5K_TUNE_MAX_TXPOWER;
-       /* Reset TX power values */
-       memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
-       ah->ah_txpower.txp_tpc = tpc;
-+      ah->ah_txpower.txp_min = 0;
-+      ah->ah_txpower.txp_max = AR5K_TUNE_MAX_TXPOWER;
--      /* Initialize TX power table */
--      ath5k_txpower_table(ah, channel, txpower);
-+      /* find matching frequency info */
-+      ath5k_get_freq_tables(ah, channel, &pcinfo_l, &pcinfo_r, &rate_info);
-+      ath5k_setup_rate_table(ah, txpower, &rate_info);
--      /*
--       * Write TX power values
--       */
--      for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) {
--              ath5k_hw_reg_write(ah,
--                      ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) |
--                      (((ah->ah_txpower.txp_pcdac[(i << 1)    ] << 8) | 0xff) & 0xffff),
--                      AR5K_PHY_PCDAC_TXPOWER(i));
-+      /* Initialize TX power table */
-+      switch(ah->ah_radio) {
-+      case AR5K_RF2413:
-+      case AR5K_RF5413:
-+              ath5k_txpower_table_2413(ah, channel, pcinfo_l, pcinfo_r);
-+              break;
-+      case AR5K_RF2425:
-+              /* unimplemented */
-+              return 0;
-+      default:
-+              /* Default power table */
-+              ath5k_txpower_table(ah, channel, pcinfo_l, pcinfo_r, txpower);
-+              break;
-       }
-       ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) |
-@@ -1536,12 +1968,19 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st
-               AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) |
-               AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4);
--      if (ah->ah_txpower.txp_tpc)
-+      if (ah->ah_txpower.txp_tpc) {
-               ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE |
-                       AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
--      else
-+
-+              ath5k_hw_reg_write(ah,
-+                      AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) |
-+                      AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) |
-+                      AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
-+                      AR5K_TPC);
-+      } else {
-               ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
-                       AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
-+      }
-       return 0;
- }
---- a/drivers/net/wireless/ath5k/ath5k.h
-+++ b/drivers/net/wireless/ath5k/ath5k.h
-@@ -204,7 +204,7 @@
- #define AR5K_TUNE_CWMAX_11B                   1023
- #define AR5K_TUNE_CWMAX_XR                    7
- #define AR5K_TUNE_NOISE_FLOOR                 -72
--#define AR5K_TUNE_MAX_TXPOWER                 60
-+#define AR5K_TUNE_MAX_TXPOWER                 63
- #define AR5K_TUNE_DEFAULT_TXPOWER             30
- #define AR5K_TUNE_TPC_TXPOWER                 true
- #define AR5K_TUNE_ANT_DIVERSITY                       true
-@@ -1085,11 +1085,23 @@ struct ath5k_hw {
-       struct ath5k_gain       ah_gain;
-       u8                      ah_offset[AR5K_MAX_RF_BANKS];
-+
-       struct {
--              u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
-+              union {
-+                      struct {
-+                              /* Temporary PCDAC tables for interpolation */
-+                              u16 pcdacL[AR5K_EEPROM_N_PD_GAINS]
-+                                      [AR5K_EEPROM_POWER_TABLE_SIZE];
-+                              u16 pcdacR[AR5K_EEPROM_N_PD_GAINS]
-+                                      [AR5K_EEPROM_POWER_TABLE_SIZE];
-+                      } rf2413;
-+              } txp_rfdata;
-+              u16             txp_xpd[AR5K_EEPROM_N_XPD_PER_CHANNEL];
-+              u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
-               u16             txp_rates[AR5K_MAX_RATES];
-               s16             txp_min;
-               s16             txp_max;
-+              s16             txp_offset;
-               bool            txp_tpc;
-               s16             txp_ofdm;
-       } ah_txpower;
---- a/drivers/net/wireless/ath5k/reg.h
-+++ b/drivers/net/wireless/ath5k/reg.h
-@@ -1552,6 +1552,15 @@
- /*===5212 Specific PCU registers===*/
-+#define AR5K_TPC                      0x80e8
-+#define AR5K_TPC_ACK                  0x0000003f      /* ack frames */
-+#define AR5K_TPC_ACK_S                        0
-+#define AR5K_TPC_CTS                  0x00003f00      /* cts frames */
-+#define AR5K_TPC_CTS_S                        8
-+#define AR5K_TPC_CHIRP                        0x003f0000      /* chirp frames */
-+#define AR5K_TPC_CHIRP_S              16
-+#define AR5K_TPC_DOPPLER              0x0f000000      /* doppler chirp span */
-+#define AR5K_TPC_DOPPLER_S            24
- /*
-  * XR (eXtended Range) mode register
-@@ -2550,6 +2559,12 @@
- #define       AR5K_PHY_TPC_RG1                0xa258
- #define       AR5K_PHY_TPC_RG1_NUM_PD_GAIN    0x0000c000
- #define       AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S  14
-+#define AR5K_PHY_TPC_RG1_PDGAIN_1     0x00030000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_1_S   16
-+#define AR5K_PHY_TPC_RG1_PDGAIN_2     0x000c0000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_2_S   18
-+#define AR5K_PHY_TPC_RG1_PDGAIN_3     0x00300000
-+#define AR5K_PHY_TPC_RG1_PDGAIN_3_S   20
- #define       AR5K_PHY_TPC_RG5                        0xa26C
- #define       AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP        0x0000000F
---- a/drivers/net/wireless/ath5k/desc.c
-+++ b/drivers/net/wireless/ath5k/desc.c
-@@ -194,6 +194,10 @@ static int ath5k_hw_setup_4word_tx_desc(
-               return -EINVAL;
-       }
-+      tx_power += ah->ah_txpower.txp_offset;
-+      if (tx_power > AR5K_TUNE_MAX_TXPOWER)
-+              tx_power = AR5K_TUNE_MAX_TXPOWER;
-+
-       /* Clear descriptor */
-       memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
diff --git a/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch b/package/mac80211/patches/300-rt2x00-Move-Move-pci_dev-specific-access-to-rt2x00p.patch
new file mode 100644 (file)
index 0000000..91f5a2a
--- /dev/null
@@ -0,0 +1,150 @@
+From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:02:51 +0100
+Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci
+
+pci_dev->irq and pci_name(pci_dev) access should be limited
+to rt2x00pci only. This is more generic and allows a rt2x00 pci
+driver to be controlled as PCI device but also as platform driver
+(needed for rt2800pci SoC support).
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2400pci.c |    2 +-
+ drivers/net/wireless/rt2x00/rt2500pci.c |    2 +-
+ drivers/net/wireless/rt2x00/rt2x00.h    |   18 ++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00pci.c |   16 ++++++++++++----
+ drivers/net/wireless/rt2x00/rt61pci.c   |    7 +------
+ 5 files changed, 33 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2400pci.c
++++ b/drivers/net/wireless/rt2x00/rt2400pci.c
+@@ -1361,7 +1361,7 @@ static int rt2400pci_init_eeprom(struct 
+        */
+       value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+       rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
+-      rt2x00_set_chip(rt2x00dev, RT2460, value, reg);
++      rt2x00_set_chip_rf(rt2x00dev, value, reg);
+       if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
+           !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
+--- a/drivers/net/wireless/rt2x00/rt2500pci.c
++++ b/drivers/net/wireless/rt2x00/rt2500pci.c
+@@ -1525,7 +1525,7 @@ static int rt2500pci_init_eeprom(struct 
+        */
+       value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+       rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
+-      rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
++      rt2x00_set_chip_rf(rt2x00dev, value, reg);
+       if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
+           !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -672,6 +672,12 @@ struct rt2x00_dev {
+       unsigned long flags;
+       /*
++       * Device information, Bus IRQ and name (PCI, SoC)
++       */
++      int irq;
++      const char *name;
++
++      /*
+        * Chipset identification.
+        */
+       struct rt2x00_chip chip;
+@@ -860,6 +866,18 @@ static inline void rt2x00_set_chip(struc
+       rt2x00dev->chip.rev = rev;
+ }
++static inline void rt2x00_set_chip_rt(struct rt2x00_dev *rt2x00dev,
++                                    const u16 rt)
++{
++      rt2x00dev->chip.rt = rt;
++}
++
++static inline void rt2x00_set_chip_rf(struct rt2x00_dev *rt2x00dev,
++                                    const u16 rf, const u32 rev)
++{
++      rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
++}
++
+ static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
+ {
+       return (chipset->rt == chip);
+--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
++++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
+@@ -170,7 +170,6 @@ static void rt2x00pci_free_queue_dma(str
+ int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev)
+ {
+-      struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev);
+       struct data_queue *queue;
+       int status;
+@@ -186,11 +185,11 @@ int rt2x00pci_initialize(struct rt2x00_d
+       /*
+        * Register interrupt handler.
+        */
+-      status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler,
+-                           IRQF_SHARED, pci_name(pci_dev), rt2x00dev);
++      status = request_irq(rt2x00dev->irq, rt2x00dev->ops->lib->irq_handler,
++                           IRQF_SHARED, rt2x00dev->name, rt2x00dev);
+       if (status) {
+               ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
+-                    pci_dev->irq, status);
++                    rt2x00dev->irq, status);
+               goto exit;
+       }
+@@ -270,6 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_
+       struct ieee80211_hw *hw;
+       struct rt2x00_dev *rt2x00dev;
+       int retval;
++      u16 chip;
+       retval = pci_request_regions(pci_dev, pci_name(pci_dev));
+       if (retval) {
+@@ -307,6 +307,14 @@ int rt2x00pci_probe(struct pci_dev *pci_
+       rt2x00dev->dev = &pci_dev->dev;
+       rt2x00dev->ops = ops;
+       rt2x00dev->hw = hw;
++      rt2x00dev->irq = pci_dev->irq;
++      rt2x00dev->name = pci_name(pci_dev);
++
++      /*
++       * Determine RT chipset by reading PCI header.
++       */
++      pci_read_config_word(pci_dev, PCI_DEVICE_ID, &chip);
++      rt2x00_set_chip_rt(rt2x00dev, chip);
+       retval = rt2x00pci_alloc_reg(rt2x00dev);
+       if (retval)
+--- a/drivers/net/wireless/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/rt2x00/rt61pci.c
+@@ -2308,7 +2308,6 @@ static int rt61pci_init_eeprom(struct rt
+       u32 reg;
+       u16 value;
+       u16 eeprom;
+-      u16 device;
+       /*
+        * Read EEPROM word for configuration.
+@@ -2317,14 +2316,10 @@ static int rt61pci_init_eeprom(struct rt
+       /*
+        * Identify RF chipset.
+-       * To determine the RT chip we have to read the
+-       * PCI header of the device.
+        */
+-      pci_read_config_word(to_pci_dev(rt2x00dev->dev),
+-                           PCI_CONFIG_HEADER_DEVICE, &device);
+       value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+       rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+-      rt2x00_set_chip(rt2x00dev, device, value, reg);
++      rt2x00_set_chip_rf(rt2x00dev, value, reg);
+       if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
+           !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
index 54361a9..6106789 100644 (file)
@@ -1,6 +1,6 @@
-From 48eba0e802443d417a4b011202f956b9e5a74bfb Mon Sep 17 00:00:00 2001
+From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:14:51 +0100
+Date: Sat, 14 Mar 2009 20:06:48 +0100
 Subject: [PATCH] rt2x00: Implement support for 802.11n
 
 Extend rt2x00lib capabilities to support 802.11n,
index cfb8a97..9cd2289 100644 (file)
@@ -1,6 +1,6 @@
-From b11cae133872a0ff531a1d2646f1e46378510fe0 Mon Sep 17 00:00:00 2001
+From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:18:56 +0100
+Date: Sat, 14 Mar 2009 20:41:58 +0100
 Subject: [PATCH] rt2x00: Implement support for rt2800pci
 
 Add support for the rt2800pci chipset.
@@ -15,10 +15,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 ---
  drivers/net/wireless/rt2x00/Kconfig     |   15 +
  drivers/net/wireless/rt2x00/Makefile    |    1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 2831 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800pci.h | 1867 ++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2x00.h    |    4 +
- 5 files changed, 4718 insertions(+), 0 deletions(-)
+ drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2x00.h    |    6 +
+ 5 files changed, 4937 insertions(+), 0 deletions(-)
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
  create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
 
@@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  obj-$(CONFIG_RT73USB)                 += rt73usb.o
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,2831 @@
+@@ -0,0 +1,3035 @@
 +/*
 +      Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +      <http://rt2x00.serialmonkey.com>
@@ -67,12 +67,21 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#include <linux/kernel.h>
 +#include <linux/module.h>
 +#include <linux/pci.h>
++#include <linux/platform_device.h>
 +#include <linux/eeprom_93cx6.h>
 +
 +#include "rt2x00.h"
 +#include "rt2x00pci.h"
 +#include "rt2800pci.h"
 +
++/* FIXME: Make Kconfig dependent */
++#ifdef CONFIG_PCI
++#define CONFIG_RT2800PCI_PCI
++#endif
++#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
++#define CONFIG_RT2800PCI_WISOC
++#endif
++
 +/*
 + * Allow hardware encryption to be disabled.
 + */
@@ -208,6 +217,44 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      mutex_unlock(&rt2x00dev->csr_mutex);
 +}
 +
++static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
++{
++      unsigned int i;
++      u32 reg;
++
++      for (i = 0; i < 200; i++) {
++              rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
++
++              if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
++                  (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
++                  (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
++                  (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
++                      break;
++
++              udelay(REGISTER_BUSY_DELAY);
++      }
++
++      if (i == 200)
++              ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
++
++      rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
++      rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++}
++
++#ifdef CONFIG_RT2800PCI_WISOC
++static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++      u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
++
++      memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
++}
++#else
++static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
 +static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 +{
 +      struct rt2x00_dev *rt2x00dev = eeprom->data;
@@ -238,6 +285,32 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
 +}
 +
++static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++      struct eeprom_93cx6 eeprom;
++      u32 reg;
++ 
++      rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
++
++      eeprom.data = rt2x00dev;
++      eeprom.register_read = rt2800pci_eepromregister_read;
++      eeprom.register_write = rt2800pci_eepromregister_write;
++      eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
++          PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
++      eeprom.reg_data_in = 0;
++      eeprom.reg_data_out = 0;
++      eeprom.reg_data_clock = 0;
++      eeprom.reg_chip_select = 0;
++
++      eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
++                             EEPROM_SIZE / sizeof(u16));
++}
++#else
++static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
++{
++}
++#endif /* CONFIG_RT2800PCI_PCI */
++
 +#ifdef CONFIG_RT2X00_LIB_DEBUGFS
 +static const struct rt2x00debug rt2800pci_rt2x00debug = {
 +      .owner  = THIS_MODULE,
@@ -372,10 +445,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      rt2x00pci_register_read(rt2x00dev, offset, &reg);
 +      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
 +                         !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
++      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
++                         (crypto->cmd == SET_KEY) * crypto->cipher);
 +      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
 +                         (crypto->cmd == SET_KEY) * crypto->bssidx);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
++      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
 +      rt2x00pci_register_write(rt2x00dev, offset, reg);
 +
 +      offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
@@ -429,10 +503,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +       * Using the correct defines correctly will cause overhead,
 +       * so just calculate the correct offset.
 +       */
-+      field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
++      field.bit_offset = 4 * (key->hw_key_idx % 8);
 +      field.bit_mask = 0x7 << field.bit_offset;
 +
-+      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
++      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
++
 +      rt2x00pci_register_read(rt2x00dev, offset, &reg);
 +      rt2x00_set_field32(&reg, field,
 +                         (crypto->cmd == SET_KEY) * crypto->cipher);
@@ -456,9 +531,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      if (crypto->cmd == SET_KEY) {
 +              /*
 +               * 1 pairwise key is possible per AID, this means that the AID
-+               * equals our hw_key_idx.
++               * equals our hw_key_idx. Make sure the WCID starts _after_ the
++               * last possible shared key entry.
 +               */
-+              key->hw_key_idx = crypto->aid;
++              if (crypto->aid > (256 - 32))
++                      return -ENOSPC;
++
++              key->hw_key_idx = 32 + crypto->aid;
++
 +
 +              memcpy(key_entry.key, crypto->key,
 +                     sizeof(key_entry.key));
@@ -929,9 +1009,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +              rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
 +              rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
 +
-+              rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
++              rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 +      } else {
-+              rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
++              rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 +
 +              rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
 +              rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
@@ -1530,8 +1610,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +       * BBP was enabled after firmware was loaded,
 +       * but we need to reactivate it now.
 +       */
-+      rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0x00000000);
-+      rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0x00000000);
++      rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++      rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 +      msleep(1);
 +
 +      for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
@@ -1747,9 +1827,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +{
 +      rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
 +
-+      if (state == STATE_AWAKE)
-+              rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
-+      else
++      if (state == STATE_AWAKE) {
++              rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
++              rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
++      } else
 +              rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 +
 +      return 0;
@@ -2016,7 +2097,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +               * decryption. This prevents us from correct providing
 +               * correct statistics through debugfs.
 +               */
-+              rxdesc->cipher = CIPHER_NONE;
++              rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 +              rxdesc->cipher_status =
 +                  rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
 +      }
@@ -2055,7 +2136,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      /*
 +       * Mask of 0x8 bit to remove the short preamble flag.
 +       */
-+      if (rxdesc->dev_flags == RATE_MODE_CCK)
++      if (rxdesc->rate_mode == RATE_MODE_CCK)
 +              rxdesc->signal &= ~0x8;
 +
 +      rxdesc->rssi =
@@ -2071,7 +2152,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      /*
 +       * Remove TXWI descriptor from start of buffer.
 +       */
-+      skb_pull(entry->skb, TXWI_DESC_SIZE);
++      skb_pull(entry->skb, RXWI_DESC_SIZE);
 +      skb_trim(entry->skb, rxdesc->size);
 +}
 +
@@ -2195,26 +2276,22 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + */
 +static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 +{
-+      struct eeprom_93cx6 eeprom;
-+      u32 reg;
 +      u16 word;
 +      u8 *mac;
 +      u8 default_lna_gain;
 +
-+      rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
-+
-+      eeprom.data = rt2x00dev;
-+      eeprom.register_read = rt2800pci_eepromregister_read;
-+      eeprom.register_write = rt2800pci_eepromregister_write;
-+      eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
-+          PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
-+      eeprom.reg_data_in = 0;
-+      eeprom.reg_data_out = 0;
-+      eeprom.reg_data_clock = 0;
-+      eeprom.reg_chip_select = 0;
-+
-+      eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
-+                             EEPROM_SIZE / sizeof(u16));
++      /*
++       * Read EEPROM into buffer
++       */
++      switch(rt2x00dev->chip.rt) {
++      case RT2880:
++      case RT3052:
++              rt2800pci_read_eeprom_soc(rt2x00dev);
++              break;
++      default:
++              rt2800pci_read_eeprom_pci(rt2x00dev);
++              break;
++      }
 +
 +      /*
 +       * Start validation of the data that has been read.
@@ -2320,7 +2397,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      u32 reg;
 +      u16 value;
 +      u16 eeprom;
-+      u16 device;
 +
 +      /*
 +       * Read EEPROM word for configuration.
@@ -2329,21 +2405,18 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +
 +      /*
 +       * Identify RF chipset.
-+       * To determine the RT chip we have to read the
-+       * PCI header of the device.
 +       */
-+      pci_read_config_word(to_pci_dev(rt2x00dev->dev),
-+                           PCI_CONFIG_HEADER_DEVICE, &device);
 +      value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 +      rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
-+      rt2x00_set_chip(rt2x00dev, device, value, reg);
++      rt2x00_set_chip_rf(rt2x00dev, value, reg);
 +
 +      if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
 +          !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
 +          !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
 +          !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
 +          !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-+          !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
++          !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
++          !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
 +              ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 +              return -ENODEV;
 +      }
@@ -2490,7 +2563,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 +
 +      if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-+          rt2x00_rf(&rt2x00dev->chip, RF2720)) {
++          rt2x00_rf(&rt2x00dev->chip, RF2720) ||
++          rt2x00_rf(&rt2x00dev->chip, RF3052)) {
 +              spec->num_channels = 14;
 +              spec->channels = rf_vals;
 +      } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
@@ -2824,6 +2898,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +/*
 + * RT2800pci module information.
 + */
++#ifdef CONFIG_RT2800PCI_PCI
 +static struct pci_device_id rt2800pci_device_table[] = {
 +      { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
 +      { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -2835,15 +2910,130 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
 +      { 0, }
 +};
++MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
++#endif /* CONFIG_RT2800PCI_PCI */
 +
 +MODULE_AUTHOR(DRV_PROJECT);
 +MODULE_VERSION(DRV_VERSION);
 +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
 +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
 +MODULE_FIRMWARE(FIRMWARE_RT2860);
 +MODULE_LICENSE("GPL");
 +
++#ifdef CONFIG_RT2800PCI_WISOC
++
++#ifdef CONFIG_RALINK_RT288X
++#define WSOC_RT_CHIPSET               RT2880
++#endif /* CONFIG_RALINK_RT288X */
++
++#ifdef CONFIG_RALINK_RT305X
++#define WSOC_RT_CHIPSET               RT3052
++#endif /* CONFIG_RALINK_RT305X */
++
++static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
++{
++      kfree(rt2x00dev->rf);
++      rt2x00dev->rf = NULL;
++
++      kfree(rt2x00dev->eeprom);
++      rt2x00dev->eeprom = NULL;
++}
++
++static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++{
++      struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
++      struct resource *res;
++
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!res) {
++              ERROR_PROBE("Failed to get MMIO resource\n");
++              return -ENODEV;
++      }
++
++      rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start);
++      rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
++      if (!rt2x00dev->eeprom)
++              goto exit;
++
++      rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
++      if (!rt2x00dev->rf)
++              goto exit;
++
++      return 0;
++
++exit:
++      ERROR_PROBE("Failed to allocate registers.\n");
++      rt2800soc_free_reg(rt2x00dev);
++
++      return -ENOMEM;
++}
++
++static int rt2800soc_probe(struct platform_device *pdev)
++{
++      const struct rt2x00_ops *ops = &rt2800pci_ops;
++      struct ieee80211_hw *hw;
++      struct rt2x00_dev *rt2x00dev;
++      int retval;
++
++      hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
++      if (!hw) {
++              ERROR_PROBE("Failed to allocate hardware.\n");
++              return -ENOMEM;
++      }
++
++      platform_set_drvdata(pdev, hw);
++
++      rt2x00dev = hw->priv;
++      rt2x00dev->dev = &pdev->dev;
++      rt2x00dev->ops = ops;
++      rt2x00dev->hw = hw;
++      rt2x00dev->irq = platform_get_irq(pdev, 0);
++      rt2x00dev->name = pdev->dev.driver->name;
++
++      rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
++
++      retval = rt2800soc_alloc_reg(rt2x00dev);
++      if (retval)
++              goto exit_free_device;
++
++      retval = rt2x00lib_probe_dev(rt2x00dev);
++      if (retval)
++              goto exit_free_reg;
++
++      return 0;
++
++exit_free_reg:
++      rt2800soc_free_reg(rt2x00dev);
++
++exit_free_device:
++      ieee80211_free_hw(hw);
++
++      return retval;
++}
++
++static int rt2800soc_remove(struct platform_device *pdev)
++{
++      struct ieee80211_hw *hw = platform_get_drvdata(pdev);
++      struct rt2x00_dev *rt2x00dev = hw->priv;
++
++      /*
++       * Free all allocated data.
++       */
++      rt2x00lib_remove_dev(rt2x00dev);
++      rt2800soc_free_reg(rt2x00dev);
++      ieee80211_free_hw(hw);
++
++      return 0;
++}
++
++static struct platform_driver rt2800soc_driver = {
++      .driver.name    = "rt2800_wmac",
++      .probe          = rt2800soc_probe,
++      .remove         = rt2800soc_remove,
++};
++#endif /* CONFIG_RT2800PCI_WISOC */
++
++#ifdef CONFIG_RT2800PCI_PCI
 +static struct pci_driver rt2800pci_driver = {
 +      .name           = KBUILD_MODNAME,
 +      .id_table       = rt2800pci_device_table,
@@ -2852,22 +3042,36 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      .suspend        = rt2x00pci_suspend,
 +      .resume         = rt2x00pci_resume,
 +};
++#endif /* CONFIG_RT2800PCI_PCI */
 +
 +static int __init rt2800pci_init(void)
 +{
-+      return pci_register_driver(&rt2800pci_driver);
++      int ret = 0;
++
++#ifdef CONFIG_RT2800PCI_WISOC
++      ret = platform_driver_register(&rt2800soc_driver);
++#endif
++#ifdef CONFIG_RT2800PCI_PCI
++      ret = pci_register_driver(&rt2800pci_driver);
++#endif
++      return ret;
 +}
 +
 +static void __exit rt2800pci_exit(void)
 +{
++#ifdef CONFIG_RT2800PCI_PCI
 +      pci_unregister_driver(&rt2800pci_driver);
++#endif
++#ifdef CONFIG_RT2800PCI_WISOC
++      platform_driver_unregister(&rt2800soc_driver);
++#endif
 +}
 +
 +module_init(rt2800pci_init);
 +module_exit(rt2800pci_exit);
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1867 @@
+@@ -0,0 +1,1880 @@
 +/*
 +      Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +      <http://rt2x00.serialmonkey.com>
@@ -2906,6 +3110,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + * RF2750 2.4G/5G 1T2R
 + * RF3020 2.4G 1T1R
 + * RF2020 2.4G B/G
++ * RF3052 2.4G 2T2R
 + */
 +#define RF2820                                0x0001
 +#define RF2850                                0x0002
@@ -2913,6 +3118,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define RF2750                                0x0004
 +#define RF3020                                0x0005
 +#define RF2020                                0x0006
++#define RF3052                                0x0008
 +
 +/*
 + * RT2860 version
@@ -4233,6 +4439,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + * H2M_MAILBOX_CID:
 + */
 +#define H2M_MAILBOX_CID                       0x7014
++#define H2M_MAILBOX_CID_CMD0          FIELD32(0x000000ff)
++#define H2M_MAILBOX_CID_CMD1          FIELD32(0x0000ff00)
++#define H2M_MAILBOX_CID_CMD2          FIELD32(0x00ff0000)
++#define H2M_MAILBOX_CID_CMD3          FIELD32(0xff000000)
 +
 +/*
 + * H2M_MAILBOX_STATUS:
@@ -4530,6 +4740,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + */
 +#define MCU_SLEEP                     0x30
 +#define MCU_WAKEUP                    0x31
++#define MCU_RADIO_OFF                 0x35
 +#define MCU_LED                               0x50
 +#define MCU_LED_STRENGTH              0x51
 +#define MCU_LED_1                     0x52
@@ -4537,6 +4748,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define MCU_LED_3                     0x54
 +#define MCU_RADAR                     0x60
 +#define MCU_BOOT_SIGNAL                       0x72
++#define MCU_BBP_SIGNAL                        0x80
++
++/*
++ * MCU mailbox tokens
++ */
++#define TOKEN_WAKUP                   3
 +
 +/*
 + * DMA descriptor defines.
@@ -4737,7 +4954,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#endif /* RT2800PCI_H */
 --- a/drivers/net/wireless/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -138,6 +138,10 @@ struct rt2x00_chip {
+@@ -138,6 +138,12 @@ struct rt2x00_chip {
  #define RT2561                0x0302
  #define RT2661                0x0401
  #define RT2571                0x1300
@@ -4745,6 +4962,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define RT2860D               0x0681  /* 2.4GHz, 5GHz PCI/CB */
 +#define RT2890                0x0701  /* 2.4GHz PCIe */
 +#define RT2890D               0x0781  /* 2.4GHz, 5GHz PCIe */
++#define RT2880                0x2880  /* WSOC */
++#define RT3052                0x3052  /* WSOC */
  
        u16 rf;
        u32 rev;
index 7a25490..c9152fd 100644 (file)
@@ -1,6 +1,6 @@
-From b249bc450f982cd2491448c91faf797ed37b69b8 Mon Sep 17 00:00:00 2001
+From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001
 From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 19:25:49 +0100
+Date: Sat, 14 Mar 2009 20:46:40 +0100
 Subject: [PATCH] rt2x00: Implement support for rt2800usb
 
 Add support for the rt2800usb chipset.
@@ -16,9 +16,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
  drivers/net/wireless/rt2x00/Kconfig     |   14 +
  drivers/net/wireless/rt2x00/Makefile    |    1 +
  drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800usb.h | 1932 ++++++++++++++++++++
+ drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++
  drivers/net/wireless/rt2x00/rt2x00.h    |    7 +
- 5 files changed, 4986 insertions(+), 0 deletions(-)
+ 5 files changed, 4988 insertions(+), 0 deletions(-)
  create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
  create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
 
@@ -397,10 +397,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      rt2x00usb_register_read(rt2x00dev, offset, &reg);
 +      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
 +                         !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
++      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
++                         (crypto->cmd == SET_KEY) * crypto->cipher);
 +      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
 +                         (crypto->cmd == SET_KEY) * crypto->bssidx);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
++      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
 +      rt2x00usb_register_write(rt2x00dev, offset, reg);
 +
 +      offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
@@ -459,10 +460,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +       * Using the correct defines correctly will cause overhead,
 +       * so just calculate the correct offset.
 +       */
-+      field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
++      field.bit_offset = 4 * (key->hw_key_idx % 8);
 +      field.bit_mask = 0x7 << field.bit_offset;
 +
-+      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
++      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
 +
 +      rt2x00usb_register_read(rt2x00dev, offset, &reg);
 +      rt2x00_set_field32(&reg, field,
@@ -488,9 +489,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      if (crypto->cmd == SET_KEY) {
 +              /*
 +               * 1 pairwise key is possible per AID, this means that the AID
-+               * equals our hw_key_idx.
++               * equals our hw_key_idx. Make sure the WCID starts _after_ the
++               * last possible shared key entry.
 +               */
-+              key->hw_key_idx = crypto->aid;
++              if (crypto->aid > (256 - 32))
++                      return -ENOSPC;
++
++              key->hw_key_idx = 32 + crypto->aid;
 +
 +              memcpy(key_entry.key, crypto->key,
 +                     sizeof(key_entry.key));
@@ -2183,12 +2188,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +              rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 +
 +      if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+              /*
-+               * Unfortunately we don't know the cipher type used during
-+               * decryption. This prevents us from correct providing
-+               * correct statistics through debugfs.
-+               */
-+              rxdesc->cipher = CIPHER_NONE;
++              rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 +              rxdesc->cipher_status =
 +                  rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
 +      }
@@ -2227,7 +2227,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +      /*
 +       * Mask of 0x8 bit to remove the short preamble flag.
 +       */
-+      if (rxdesc->dev_flags == RATE_MODE_CCK)
++      if (rxdesc->rate_mode == RATE_MODE_CCK)
 +              rxdesc->signal &= ~0x8;
 +
 +      rxdesc->rssi =
@@ -3066,7 +3066,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +module_exit(rt2800usb_exit);
 --- /dev/null
 +++ b/drivers/net/wireless/rt2x00/rt2800usb.h
-@@ -0,0 +1,1932 @@
+@@ -0,0 +1,1934 @@
 +/*
 +      Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
 +      <http://rt2x00.serialmonkey.com>
@@ -4783,6 +4783,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 + */
 +#define MCU_SLEEP                     0x30
 +#define MCU_WAKEUP                    0x31
++#define MCU_RADIO_OFF                 0x35
 +#define MCU_LED                               0x50
 +#define MCU_LED_STRENGTH              0x51
 +#define MCU_LED_1                     0x52
@@ -4790,6 +4791,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#define MCU_LED_3                     0x54
 +#define MCU_RADAR                     0x60
 +#define MCU_BOOT_SIGNAL                       0x72
++#define MCU_BBP_SIGNAL                        0x80
 +
 +/*
 + * DMA descriptor defines.
@@ -5001,15 +5003,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
 +#endif /* RT2800USB_H */
 --- a/drivers/net/wireless/rt2x00/rt2x00.h
 +++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -142,6 +142,7 @@ struct rt2x00_chip {
- #define RT2860D               0x0681  /* 2.4GHz, 5GHz PCI/CB */
- #define RT2890                0x0701  /* 2.4GHz PCIe */
+@@ -144,6 +144,7 @@ struct rt2x00_chip {
  #define RT2890D               0x0781  /* 2.4GHz, 5GHz PCIe */
+ #define RT2880                0x2880  /* WSOC */
+ #define RT3052                0x3052  /* WSOC */
 +#define RT2870                0x1600
  
        u16 rf;
        u32 rev;
-@@ -780,6 +781,12 @@ struct rt2x00_dev {
+@@ -788,6 +789,12 @@ struct rt2x00_dev {
        u8 freq_offset;
  
        /*
diff --git a/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch b/package/mac80211/patches/304-rt2x00-Detect-cypher-type-during-RX-rt2800pci.patch
deleted file mode 100644 (file)
index 898a209..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From f23c3d3175e55ebac81d6e29f1c1415491a78d60 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 20:12:44 +0100
-Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800pci)
-
-Use UDF field in WCID entry to pass the cipher type
-to the RXWI fields. This will allow keeping track of
-the number of frames received with a particular cipher type
-which is exported through debugfs.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -339,7 +339,7 @@ static void rt2800pci_config_wcid_attr(s
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
--      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-       rt2x00pci_register_write(rt2x00dev, offset, reg);
-       offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-@@ -1980,7 +1980,7 @@ static void rt2800pci_fill_rxdone(struct
-                * decryption. This prevents us from correct providing
-                * correct statistics through debugfs.
-                */
--              rxdesc->cipher = CIPHER_NONE;
-+              rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-               rxdesc->cipher_status =
-                   rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
-       }
diff --git a/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/304-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
new file mode 100644 (file)
index 0000000..2bd4eb2
--- /dev/null
@@ -0,0 +1,25 @@
+From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:57:27 +0100
+Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt61pci.h |    6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt61pci.h
++++ b/drivers/net/wireless/rt2x00/rt61pci.h
+@@ -63,12 +63,6 @@
+  */
+ /*
+- * PCI Configuration Header
+- */
+-#define PCI_CONFIG_HEADER_VENDOR      0x0000
+-#define PCI_CONFIG_HEADER_DEVICE      0x0002
+-
+-/*
+  * HOST_CMD_CSR: For HOST to interrupt embedded processor
+  */
+ #define HOST_CMD_CSR                  0x0008
diff --git a/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch b/package/mac80211/patches/305-rt2x00-Detect-cypher-type-during-RX-rt2800usb.patch
deleted file mode 100644 (file)
index 831dda0..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-From 35c7358f5f7ba03daeecdf1fdceabd48ebcd029a Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Tue, 3 Mar 2009 20:15:17 +0100
-Subject: [PATCH] rt2x00: Detect cypher type during RX (rt2800usb)
-
-Use UDF field in WCID entry to pass the cipher type
-to the RXWI fields. This will allow keeping track of
-the number of frames received with a particular cipher type
-which is exported through debugfs.
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800usb.c |    9 ++-------
- 1 files changed, 2 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -366,7 +366,7 @@ static void rt2800usb_config_wcid_attr(s
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
--      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-       rt2x00usb_register_write(rt2x00dev, offset, reg);
-       offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-@@ -2149,12 +2149,7 @@ static void rt2800usb_fill_rxdone(struct
-               rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
-       if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
--              /*
--               * Unfortunately we don't know the cipher type used during
--               * decryption. This prevents us from correct providing
--               * correct statistics through debugfs.
--               */
--              rxdesc->cipher = CIPHER_NONE;
-+              rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
-               rxdesc->cipher_status =
-                   rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
-       }
diff --git a/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch b/package/mac80211/patches/305-rt2x00-rt2x00-Move-Move-pci_dev-specific-access-to.patch
new file mode 100644 (file)
index 0000000..783a6d6
--- /dev/null
@@ -0,0 +1,25 @@
+From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sat, 14 Mar 2009 20:58:12 +0100
+Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.h |    6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -83,12 +83,6 @@
+  */
+ /*
+- * PCI Configuration Header
+- */
+-#define PCI_CONFIG_HEADER_VENDOR      0x0000
+-#define PCI_CONFIG_HEADER_DEVICE      0x0002
+-
+-/*
+  * E2PROM_CSR: EEPROM control register.
+  * RELOAD: Write 1 to reload eeprom content.
+  * TYPE: 0: 93c46, 1:93c66.
diff --git a/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch b/package/mac80211/patches/306-rt2x00-Fix-HW-crypto-offset-calculation-rt2800pci.patch
deleted file mode 100644 (file)
index 1fbef6c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From e63585e28192e854707c549547645c669e6daa2a Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Wed, 4 Mar 2009 20:25:43 +0100
-Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |    8 +++++---
- 1 files changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -336,7 +336,8 @@ static void rt2800pci_config_wcid_attr(s
-       rt2x00pci_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-                          !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
--      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-+                         (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-@@ -393,10 +394,11 @@ static int rt2800pci_config_shared_key(s
-        * Using the correct defines correctly will cause overhead,
-        * so just calculate the correct offset.
-        */
--      field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
-+      field.bit_offset = 4 * (key->hw_key_idx % 8);
-       field.bit_mask = 0x7 << field.bit_offset;
--      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
-+      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+
-       rt2x00pci_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, field,
-                          (crypto->cmd == SET_KEY) * crypto->cipher);
diff --git a/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch b/package/mac80211/patches/306-rt2x00-Fix-module-loading-in-case-of-error-rt2800p.patch
new file mode 100644 (file)
index 0000000..4f83293
--- /dev/null
@@ -0,0 +1,32 @@
+From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 15 Mar 2009 15:13:58 +0100
+Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c |    9 +++++++++
+ 1 files changed, 9 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void)
+ #ifdef CONFIG_RT2800PCI_WISOC
+       ret = platform_driver_register(&rt2800soc_driver);
++      if (ret)
++              return ret;
+ #endif
+ #ifdef CONFIG_RT2800PCI_PCI
+       ret = pci_register_driver(&rt2800pci_driver);
++      if (ret) {
++#ifdef CONFIG_RT2800PCI_WISOC
++              platform_driver_unregister(&rt2800soc_driver);
++#endif
++              return ret;
++      }
+ #endif
++
+       return ret;
+ }
diff --git a/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch b/package/mac80211/patches/307-rt2x00-Add-PM-support-for-SoC-rt2800pci.patch
new file mode 100644 (file)
index 0000000..d08e5fe
--- /dev/null
@@ -0,0 +1,80 @@
+From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Sun, 15 Mar 2009 15:37:29 +0100
+Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci)
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c |   52 +++++++++++++++++++++++++++++--
+ 1 files changed, 49 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -2934,7 +2934,7 @@ exit:
+ static int rt2800soc_probe(struct platform_device *pdev)
+ {
+-      const struct rt2x00_ops *ops = &rt2800pci_ops;
++      struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
+       struct ieee80211_hw *hw;
+       struct rt2x00_dev *rt2x00dev;
+       int retval;
+@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf
+       return 0;
+ }
++#ifdef CONFIG_PM
++int rt2x00soc_suspend(struct device *dev, pm_message_t state)
++{
++      struct ieee80211_hw *hw = dev_get_drvdata(dev);
++      struct rt2x00_dev *rt2x00dev = hw->priv;
++      int retval;
++
++      retval = rt2x00lib_suspend(rt2x00dev, state);
++      if (retval)
++              return retval;
++
++      rt2800soc_free_reg(rt2x00dev);
++
++      return 0;
++}
++
++int rt2x00soc_resume(struct device *dev)
++{
++      struct ieee80211_hw *hw = dev_get_drvdata(dev);
++      struct rt2x00_dev *rt2x00dev = hw->priv;
++      int retval;
++
++      retval = rt2x00soc_alloc_reg(rt2x00dev);
++      if (retval)
++              return retval;
++
++      retval = rt2x00lib_resume(rt2x00dev);
++      if (retval)
++              goto exit_free_reg;
++
++      return 0;
++
++exit_free_reg:
++      rt2x00pci_free_reg(rt2x00dev);
++
++      return retval;
++}
++#endif /* CONFIG_PM */
++
+ static struct platform_driver rt2800soc_driver = {
+-      .driver.name    = "rt2800_wmac",
++      .driver         = {
++              .name           = "rt2800_wmac",
++              .owner          = THIS_MODULE,
++              .mod_name       = KBUILD_MODNAME,
++              .p              = &rt2800pci_ops;
++      }
+       .probe          = rt2800soc_probe,
+-      .remove         = rt2800soc_remove,
++      .remove         = __devexit_p(rt2800soc_remove),
++      .suspend        = rt2x00soc_suspend,
++      .resume         = rt2x00soc_resume,
+ };
+ #endif /* CONFIG_RT2800PCI_WISOC */
diff --git a/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch b/package/mac80211/patches/307-rt2x00-Fix-HW-crypto-offset-calculation-rt2800usb.patch
deleted file mode 100644 (file)
index 11a915e..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-From d6368d8b77bb8568aa0c92adf1e507fb4198ff41 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Wed, 4 Mar 2009 20:26:27 +0100
-Subject: [PATCH] rt2x00: Fix HW crypto offset calculation (rt2800usb)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800usb.c |    7 ++++---
- 1 files changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -363,7 +363,8 @@ static void rt2800usb_config_wcid_attr(s
-       rt2x00usb_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-                          !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
--      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, crypto->cipher);
-+      rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-+                         (crypto->cmd == SET_KEY) * crypto->cipher);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-                          (crypto->cmd == SET_KEY) * crypto->bssidx);
-       rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-@@ -425,10 +426,10 @@ static int rt2800usb_config_shared_key(s
-        * Using the correct defines correctly will cause overhead,
-        * so just calculate the correct offset.
-        */
--      field.bit_offset = (4 * key->keyidx) + (16 * (crypto->bssidx & 1));
-+      field.bit_offset = 4 * (key->hw_key_idx % 8);
-       field.bit_mask = 0x7 << field.bit_offset;
--      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 2);
-+      offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-       rt2x00usb_register_read(rt2x00dev, offset, &reg);
-       rt2x00_set_field32(&reg, field,
diff --git a/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-DMA-fixes-new-chipset-support-rt2800pci.patch
new file mode 100644 (file)
index 0000000..3bb5c2e
--- /dev/null
@@ -0,0 +1,535 @@
+From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Mon, 16 Mar 2009 20:16:59 +0100
+Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci)
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c |  320 +++++++++++++++++++++++++++++--
+ drivers/net/wireless/rt2x00/rt2800pci.h |   57 ++++++-
+ 2 files changed, 361 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
+  */
+ #define WAIT_FOR_BBP(__dev, __reg) \
+       rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RFCSR(__dev, __reg) \
++      rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+ #define WAIT_FOR_RF(__dev, __reg) \
+       rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+ #define WAIT_FOR_MCU(__dev, __reg) \
+@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt
+       mutex_unlock(&rt2x00dev->csr_mutex);
+ }
++static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
++                                const unsigned int word, const u8 value)
++{
++      u32 reg;
++
++      mutex_lock(&rt2x00dev->csr_mutex);
++
++      /*
++       * Wait until the RFCSR becomes available, afterwards we
++       * can safely write the new data into the register.
++       */
++      if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++              reg = 0;
++              rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
++              rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++              rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
++              rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++              rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++      }
++
++      mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
++static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
++                               const unsigned int word, u8 *value)
++{
++      u32 reg;
++
++      mutex_lock(&rt2x00dev->csr_mutex);
++
++      /*
++       * Wait until the RFCSR becomes available, afterwards we
++       * can safely write the read request into the register.
++       * After the data has been written, we wait until hardware
++       * returns the correct value, if at any time the register
++       * doesn't become available in time, reg will be 0xffffffff
++       * which means we return 0xff to the caller.
++       */
++      if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
++              reg = 0;
++              rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
++              rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
++              rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
++
++              rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
++
++              WAIT_FOR_RFCSR(rt2x00dev, &reg);
++      }
++
++      *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
++
++      mutex_unlock(&rt2x00dev->csr_mutex);
++}
++
+ static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
+                              const unsigned int word, const u32 value)
+ {
+@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct
+ {
+       u32 reg;
++      /*
++       * RT2880 and RT3052 don't support MCU requests.
++       */
++      if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
++          rt2x00_rt(&rt2x00dev->chip, RT3052))
++              return;
++
+       mutex_lock(&rt2x00dev->csr_mutex);
+       /*
+@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st
+       rt2x00dev->lna_gain = lna_gain;
+ }
+-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
+-                                   struct ieee80211_conf *conf,
+-                                   struct rf_channel *rf,
+-                                   struct channel_info *info)
++static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
++                                        struct ieee80211_conf *conf,
++                                        struct rf_channel *rf,
++                                        struct channel_info *info)
+ {
+-      u32 reg;
+-      unsigned int tx_pin;
+       u16 eeprom;
+       rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str
+        */
+       rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+-      if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
++      if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+-      }
+       if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+               rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str
+       rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+       rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+       rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
++}
++
++static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
++                                        struct ieee80211_conf *conf,
++                                        struct rf_channel *rf,
++                                        struct channel_info *info)
++{
++      u8 rfcsr;
++
++      rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
++      rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
++      rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
++                        TXPOWER_G_TO_DEV(info->tx_power1));
++      rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
++      rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++
++      if (conf_is_ht40(conf))
++              rt2800pci_rfcsr_write(rt2x00dev, 24,
++                                    rt2x00dev->calibration_bw40);
++      else
++              rt2800pci_rfcsr_write(rt2x00dev, 24,
++                                    rt2x00dev->calibration_bw20);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
++      rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
++}
++
++static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
++                                   struct ieee80211_conf *conf,
++                                   struct rf_channel *rf,
++                                   struct channel_info *info)
++{
++      u32 reg;
++      unsigned int tx_pin;
++      u16 eeprom;
++      u8 bbp;
++
++      /*
++       * Determine antenna settings from EEPROM
++       */
++      rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
++
++      if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
++              rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
++      else
++              rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
+       /*
+        * Change BBP settings
+@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str
+       rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
++      rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++      rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
++      rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++      rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
++      rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
++      rt2800pci_bbp_write(rt2x00dev, 3, bbp);
++
++      if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
++              if (conf_is_ht40(conf)) {
++                      rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
++                      rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
++                      rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
++              } else {
++                      rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
++                      rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
++                      rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
++              }
++      }
++
+       msleep(1);
+ }
+@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct 
+       entry_priv = rt2x00dev->rx->entries[0].priv_data;
+       rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+       rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+-      rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0);
++      rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+       rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
+       /*
+@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2
+       rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
+       rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
+       rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
+-      rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
++      rt2800pci_bbp_write(rt2x00dev, 105, 0x01);
+       if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+               rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2
+       if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+               rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
++      if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
++              rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
++              rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
++              rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
++      }
++
+       for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+               rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2
+       return 0;
+ }
++static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
++                                 bool bw40, u8 rfcsr24, u8 filter_target)
++{
++      unsigned int i;
++      u8 bbp;
++      u8 rfcsr;
++      u8 passband;
++      u8 stopband;
++      u8 overtuned = 0;
++
++      rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++
++      rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++      rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
++      rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
++      rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++      /*
++       * Set power & frequency of passband test tone
++       */
++      rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++      for (i = 0; i < 100; i++) {
++              rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++              msleep(1);
++
++              rt2800pci_bbp_read(rt2x00dev, 55, &passband);
++              if (passband)
++                      break;
++      }
++
++      /*
++       * Set power & frequency of stopband test tone
++       */
++      rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
++
++      for (i = 0; i < 100; i++) {
++              rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
++              msleep(1);
++
++              rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
++
++              if ((passband - stopband) <= filter_target) {
++                      rfcsr24++;
++                      overtuned += ((passband - stopband) == filter_target);
++              } else
++                      break;
++
++              rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++      }
++
++      rfcsr24 -= !!overtuned;
++
++      rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
++      return rfcsr24;
++}
++
++static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
++{
++      u8 rfcsr;
++      u8 bbp;
++      
++      if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
++          !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++          !rt2x00_rf(&rt2x00dev->chip, RF3022))
++              return 0;
++
++      /*
++       * Init RF calibration.
++       */
++      rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
++      rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++      msleep(1);
++      rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
++      rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++      rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
++      rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
++      rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
++      rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
++      rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
++      rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
++      rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
++      rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
++      rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
++      rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
++      rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
++      rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
++      rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
++      rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
++      rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
++      rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
++      rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
++      rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
++      rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
++      rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
++      rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
++      rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
++      rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
++      rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
++      rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
++      rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
++      rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
++      rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
++      rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
++      rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
++
++      /*
++       * Set RX Filter calibration for 20MHz and 40MHz
++       */
++      rt2x00dev->calibration_bw20 =
++          rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
++      rt2x00dev->calibration_bw40 =
++          rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
++
++      /*
++       * Set back to initial state
++       */
++      rt2800pci_bbp_write(rt2x00dev, 24, 0);
++
++      rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
++      rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
++      rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++      /*
++       * set BBP back to BW20
++       */
++      rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
++      rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
++      rt2800pci_bbp_write(rt2x00dev, 4, bbp);
++
++      return 0;
++}
++
+ /*
+  * Device state switch handlers.
+  */
+@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct
+                    rt2800pci_init_queues(rt2x00dev) ||
+                    rt2800pci_init_registers(rt2x00dev) ||
+                    rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+-                   rt2800pci_init_bbp(rt2x00dev)))
++                   rt2800pci_init_bbp(rt2x00dev) ||
++                   rt2800pci_init_rfcsr(rt2x00dev)))
+               return -EIO;
+       /*
+@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct
+       rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+       /*
++       * Set RX IDX in register to inform hardware that we have handled
++       * this entry and it is available for reuse again.
++       */
++      rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
++
++      /*
+        * Remove TXWI descriptor from start of buffer.
+        */
+       skb_pull(entry->skb, RXWI_DESC_SIZE);
+@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct 
+           !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+           !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+           !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
+-          !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++          !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
++          !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+               ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+               return -ENODEV;
+       }
+@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc
+       if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+           rt2x00_rf(&rt2x00dev->chip, RF2720) ||
+-          rt2x00_rf(&rt2x00dev->chip, RF3052)) {
++          rt2x00_rf(&rt2x00dev->chip, RF3021) ||
++          rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+               spec->num_channels = 14;
+               spec->channels = rf_vals;
+       } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2
+       /*
+        * This device requires firmware.
+        */
+-      __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
++      if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
++          !rt2x00_rt(&rt2x00dev->chip, RT3052))
++              __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+       if (!modparam_nohwcrypt)
+               __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+--- a/drivers/net/wireless/rt2x00/rt2800pci.h
++++ b/drivers/net/wireless/rt2x00/rt2800pci.h
+@@ -36,7 +36,8 @@
+  * RF2750 2.4G/5G 1T2R
+  * RF3020 2.4G 1T1R
+  * RF2020 2.4G B/G
+- * RF3052 2.4G 2T2R
++ * RF3021 2.4G 1T2R
++ * RF3022 2.4G 2T2R
+  */
+ #define RF2820                                0x0001
+ #define RF2850                                0x0002
+@@ -44,7 +45,8 @@
+ #define RF2750                                0x0004
+ #define RF3020                                0x0005
+ #define RF2020                                0x0006
+-#define RF3052                                0x0008
++#define RF3021                                0x0007
++#define RF3022                                0x0008
+ /*
+  * RT2860 version
+@@ -373,6 +375,15 @@
+ #define PBF_DBG                               0x043c
+ /*
++ * RF registers
++ */
++#define       RF_CSR_CFG                      0x0500
++#define RF_CSR_CFG_DATA                       FIELD32(0x000000ff)
++#define RF_CSR_CFG_REGNUM             FIELD32(0x00001f00)
++#define RF_CSR_CFG_WRITE              FIELD32(0x00010000)
++#define RF_CSR_CFG_BUSY                       FIELD32(0x00020000)
++
++/*
+  * MAC Control/Status Registers(CSR).
+  * Some values are set in TU, whereas 1 TU == 1024 us.
+  */
+@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry {
+  * BBP 3: RX Antenna
+  */
+ #define BBP3_RX_ANTENNA                       FIELD8(0x18)
++#define BBP3_HT40_PLUS                        FIELD8(0x20)
++
++/*
++ * BBP 4: Bandwidth
++ */
++#define BBP4_TX_BF                    FIELD8(0x01)
++#define BBP4_BANDWIDTH                        FIELD8(0x18)
++
++/*
++ * RFCSR registers
++ * The wordsize of the RFCSR is 8 bits.
++ */
++
++/*
++ * RFCSR 6:
++ */
++#define RFCSR6_R                      FIELD8(0x03)
++
++/*
++ * RFCSR 7:
++ */
++#define RFCSR7_RF_TUNING              FIELD8(0x01)
++
++/*
++ * RFCSR 12:
++ */
++#define RFCSR12_TX_POWER              FIELD8(0x1f)
++
++/*
++ * RFCSR 22:
++ */
++#define RFCSR22_BASEBAND_LOOPBACK     FIELD8(0x01)
++
++/*
++ * RFCSR 23:
++ */
++#define RFCSR23_FREQ_OFFSET           FIELD8(0x7f)
++
++/*
++ * RFCSR 30:
++ */
++#define RFCSR30_RF_CALIBRATION                FIELD8(0x80)
+ /*
+  * RF registers
diff --git a/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch b/package/mac80211/patches/308-rt2x00-Fix-fill_rxdone-rt2800pci.patch
deleted file mode 100644 (file)
index 3cb6147..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-From 89950075234deb1f98ff52b225487ffc5b8199b0 Mon Sep 17 00:00:00 2001
-From: Ivo van Doorn <IvDoorn@gmail.com>
-Date: Sun, 8 Mar 2009 16:47:28 +0100
-Subject: [PATCH] rt2x00: Fix fill_rxdone (rt2800pci)
-
-Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
----
- drivers/net/wireless/rt2x00/rt2800pci.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -2037,7 +2037,7 @@ static void rt2800pci_fill_rxdone(struct
-       /*
-        * Remove TXWI descriptor from start of buffer.
-        */
--      skb_pull(entry->skb, TXWI_DESC_SIZE);
-+      skb_pull(entry->skb, RXWI_DESC_SIZE);
-       skb_trim(entry->skb, rxdesc->size);
- }
diff --git a/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch b/package/mac80211/patches/309-rt2x00-Fix-compile-errors-for-SoC.patch
new file mode 100644 (file)
index 0000000..25c0779
--- /dev/null
@@ -0,0 +1,136 @@
+From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Tue, 17 Mar 2009 14:01:29 +0100
+Subject: [PATCH] rt2x00: Fix compile errors for SoC
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+ drivers/net/wireless/rt2x00/rt2800pci.c |   37 +++++++++++++++----------------
+ 1 files changed, 18 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL");
+ #define WSOC_RT_CHIPSET               RT3052
+ #endif /* CONFIG_RALINK_RT305X */
+-static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
++static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
+ {
+       kfree(rt2x00dev->rf);
+       rt2x00dev->rf = NULL;
+@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt
+       rt2x00dev->eeprom = NULL;
+ }
+-static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
++static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+ {
+       struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+       struct resource *res;
+@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt
+ exit:
+       ERROR_PROBE("Failed to allocate registers.\n");
+-      rt2800soc_free_reg(rt2x00dev);
++      rt2x00soc_free_reg(rt2x00dev);
+       return -ENOMEM;
+ }
+-static int rt2800soc_probe(struct platform_device *pdev)
++static int rt2x00soc_probe(struct platform_device *pdev)
+ {
+-      struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
++      const struct rt2x00_ops *ops = &rt2800pci_ops;
+       struct ieee80211_hw *hw;
+       struct rt2x00_dev *rt2x00dev;
+       int retval;
+@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo
+       rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
+-      retval = rt2800soc_alloc_reg(rt2x00dev);
++      retval = rt2x00soc_alloc_reg(rt2x00dev);
+       if (retval)
+               goto exit_free_device;
+@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo
+       return 0;
+ exit_free_reg:
+-      rt2800soc_free_reg(rt2x00dev);
++      rt2x00soc_free_reg(rt2x00dev);
+ exit_free_device:
+       ieee80211_free_hw(hw);
+@@ -3267,7 +3267,7 @@ exit_free_device:
+       return retval;
+ }
+-static int rt2800soc_remove(struct platform_device *pdev)
++static int rt2x00soc_remove(struct platform_device *pdev)
+ {
+       struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+       struct rt2x00_dev *rt2x00dev = hw->priv;
+@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf
+        * Free all allocated data.
+        */
+       rt2x00lib_remove_dev(rt2x00dev);
+-      rt2800soc_free_reg(rt2x00dev);
++      rt2x00soc_free_reg(rt2x00dev);
+       ieee80211_free_hw(hw);
+       return 0;
+ }
+ #ifdef CONFIG_PM
+-int rt2x00soc_suspend(struct device *dev, pm_message_t state)
++int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
+ {
+-      struct ieee80211_hw *hw = dev_get_drvdata(dev);
++      struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+       struct rt2x00_dev *rt2x00dev = hw->priv;
+       int retval;
+@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev
+       if (retval)
+               return retval;
+-      rt2800soc_free_reg(rt2x00dev);
++      rt2x00soc_free_reg(rt2x00dev);
+       return 0;
+ }
+-int rt2x00soc_resume(struct device *dev)
++int rt2x00soc_resume(struct platform_device *pdev)
+ {
+-      struct ieee80211_hw *hw = dev_get_drvdata(dev);
++      struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+       struct rt2x00_dev *rt2x00dev = hw->priv;
+       int retval;
+@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev)
+       return 0;
+ exit_free_reg:
+-      rt2x00pci_free_reg(rt2x00dev);
++      rt2x00soc_free_reg(rt2x00dev);
+       return retval;
+ }
+@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_
+               .name           = "rt2800_wmac",
+               .owner          = THIS_MODULE,
+               .mod_name       = KBUILD_MODNAME,
+-              .p              = &rt2800pci_ops;
+-      }
+-      .probe          = rt2800soc_probe,
+-      .remove         = __devexit_p(rt2800soc_remove),
++      },
++      .probe          = rt2x00soc_probe,
++      .remove         = __devexit_p(rt2x00soc_remove),
+       .suspend        = rt2x00soc_suspend,
+       .resume         = rt2x00soc_resume,
+ };
index 5fe8a3a..4fe0e46 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath9k/main.c
 +++ b/drivers/net/wireless/ath9k/main.c
-@@ -1024,6 +1024,9 @@ static void ath_unregister_led(struct at
+@@ -1031,6 +1031,9 @@ static void ath_unregister_led(struct at
  
  static void ath_deinit_leds(struct ath_softc *sc)
  {
@@ -10,7 +10,7 @@
        cancel_delayed_work_sync(&sc->ath_led_blink_work);
        ath_unregister_led(&sc->assoc_led);
        sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
-@@ -1038,6 +1041,9 @@ static void ath_init_leds(struct ath_sof
+@@ -1045,6 +1048,9 @@ static void ath_init_leds(struct ath_sof
        char *trigger;
        int ret;
  
index d1e800c..24234eb 100644 (file)
@@ -1,11 +1,11 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -111,7 +111,7 @@ ifneq ($(CONFIG_PCI),)
+@@ -125,7 +125,7 @@ ifneq ($(CONFIG_PCI),)
  CONFIG_ATH5K=m
- # CONFIG_ATH5K_DEBUG is not set
+ # CONFIG_ATH5K_DEBUG=y
  CONFIG_ATH9K=m
--# CONFIG_ATH9K_DEBUG is not set
+-# CONFIG_ATH9K_DEBUG=y
 +CONFIG_ATH9K_DEBUG=y
  
  
- CONFIG_IWLWIFI=m
CONFIG_IWLWIFI=m
index 8f41b5b..69d3210 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath9k/hw.c
 +++ b/drivers/net/wireless/ath9k/hw.c
-@@ -494,11 +494,18 @@ static int ath9k_hw_init_macaddr(struct 
+@@ -513,11 +513,18 @@ static int ath9k_hw_init_macaddr(struct 
                ah->macaddr[2 * i] = eeval >> 8;
                ah->macaddr[2 * i + 1] = eeval & 0xff;
        }