[atheros]: Add initial kernel 2.6.28 support for atheros target.
authorHauke Mehrtens <hauke@hauke-m.de>
Fri, 20 Feb 2009 16:27:42 +0000 (16:27 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Fri, 20 Feb 2009 16:27:42 +0000 (16:27 +0000)
The include files moved from /include/asm-mips/mach-atheros/ to /arch/mips/include/asm/mach-atheros/
This patch is based on the old kernel 2.6.27 patches.

SVN-Revision: 14584

40 files changed:
package/wrt55agv2-spidevs/Makefile
target/linux/atheros/config-2.6.28 [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h [new file with mode: 0644]
target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/100-board.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/110-spiflash.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/120-watchdog.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch [new file with mode: 0644]
target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch [new file with mode: 0644]

index c6c85da..ab3e742 100644 (file)
@@ -36,7 +36,7 @@ MAKE_OPTS:= \
        CROSS_COMPILE="$(TARGET_CROSS)" \
        SUBDIRS="$(PKG_BUILD_DIR)" \
        EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
-       LINUXINCLUDE="-I$(LINUX_DIR)/include -include linux/autoconf.h" \
+       LINUXINCLUDE="-I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include -include linux/autoconf.h" \
        $(EXTRA_KCONFIG)
 
 define Build/Prepare
diff --git a/target/linux/atheros/config-2.6.28 b/target/linux/atheros/config-2.6.28
new file mode 100644 (file)
index 0000000..b088e19
--- /dev/null
@@ -0,0 +1,235 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_AR2313=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ATHEROS=y
+CONFIG_ATHEROS_AR5312=y
+CONFIG_ATHEROS_AR5315=y
+CONFIG_ATHEROS_AR5315_PCI=y
+CONFIG_ATHEROS_WDT=y
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BT is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CLASSIC_RCU=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CSRC_R4K=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_FREEZER is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GPIO_DEVICE=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HERMES is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+CONFIG_ICPLUS_PHY=y
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+CONFIG_KMOD=y
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_SPIFLASH=y
+# CONFIG_NET_PCI is not set
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_DEFRAG_IPV4=m
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SND_MIPS=y
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_WDM=m
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig
new file mode 100644 (file)
index 0000000..953f0cb
--- /dev/null
@@ -0,0 +1,27 @@
+config ATHEROS_AR5312
+       bool "Atheros 5312/2312+ support"
+       depends on ATHEROS
+       default y
+
+config ATHEROS_AR5315
+       bool "Atheros 5315/2315+ support"
+       depends on ATHEROS
+       select DMA_NONCOHERENT
+       select CEVT_R4K
+       select CSRC_R4K
+       select IRQ_CPU
+       select SYS_HAS_CPU_MIPS32_R1
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_BIG_ENDIAN
+       select GENERIC_GPIO
+       default y
+
+config ATHEROS_AR5315_PCI
+       bool "PCI support"
+       select HW_HAS_PCI
+       select PCI
+       select USB_ARCH_HAS_HCD
+       select USB_ARCH_HAS_OHCI
+       select USB_ARCH_HAS_EHCI
+       depends on ATHEROS_AR5315
+       default n
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile
new file mode 100644 (file)
index 0000000..2c2b991
--- /dev/null
@@ -0,0 +1,13 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o reset.o
+obj-$(CONFIG_ATHEROS_AR5312) += ar5312/
+obj-$(CONFIG_ATHEROS_AR5315) += ar5315/
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile
new file mode 100644 (file)
index 0000000..6c50d99
--- /dev/null
@@ -0,0 +1,11 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2007 FON Technology, SL.
+# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y := board.o irq.o
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c
new file mode 100644 (file)
index 0000000..938db11
--- /dev/null
@@ -0,0 +1,473 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <ar531x.h>
+#include <linux/leds.h>
+
+#define NO_PHY 0x1f
+
+static int is_5312 = 0;
+static struct platform_device *ar5312_devs[6];
+
+static struct resource ar5312_eth0_res[] = {
+       {
+               .name = "eth0_membase",
+               .flags = IORESOURCE_MEM,
+               .start = KSEG1ADDR(AR531X_ENET0),
+               .end = KSEG1ADDR(AR531X_ENET0 + 0x2000),
+       },
+       {
+               .name = "eth0_irq",
+               .flags = IORESOURCE_IRQ,
+               .start = AR5312_IRQ_ENET0_INTRS,
+               .end = AR5312_IRQ_ENET0_INTRS,
+       },
+};
+static struct ar531x_eth ar5312_eth0_data = {
+       .phy = NO_PHY,
+       .mac = 0,
+       .reset_base = AR531X_RESET,
+       .reset_mac = AR531X_RESET_ENET0,
+       .reset_phy = AR531X_RESET_EPHY0,
+       .phy_base = KSEG1ADDR(AR531X_ENET0),
+};
+
+static struct resource ar5312_eth1_res[] = {
+       {
+               .name = "eth1_membase",
+               .flags = IORESOURCE_MEM,
+               .start = KSEG1ADDR(AR531X_ENET1),
+               .end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
+       },
+       {
+               .name = "eth1_irq",
+               .flags = IORESOURCE_IRQ,
+               .start = AR5312_IRQ_ENET1_INTRS,
+               .end = AR5312_IRQ_ENET1_INTRS,
+       },
+};
+static struct ar531x_eth ar5312_eth1_data = {
+       .phy = NO_PHY,
+       .mac = 1,
+       .reset_base = AR531X_RESET,
+       .reset_mac = AR531X_RESET_ENET1,
+       .reset_phy = AR531X_RESET_EPHY1,
+       .phy_base = KSEG1ADDR(AR531X_ENET1),
+};
+
+static struct platform_device ar5312_eth[] = {
+       {
+               .id = 0,
+               .name = "ar531x-eth",
+               .dev.platform_data = &ar5312_eth0_data,
+               .resource = ar5312_eth0_res,
+               .num_resources = ARRAY_SIZE(ar5312_eth0_res)
+       },
+       {
+               .id = 1,
+               .name = "ar531x-eth",
+               .dev.platform_data = &ar5312_eth1_data,
+               .resource = ar5312_eth1_res,
+               .num_resources = ARRAY_SIZE(ar5312_eth1_res)
+       },
+};
+
+
+/*
+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
+ * of ENET1. Atheros calls it 'twisted' for a reason :)
+ */
+static struct resource ar231x_eth0_res[] = {
+       {
+               .name = "eth0_membase",
+               .flags = IORESOURCE_MEM,
+               .start = KSEG1ADDR(AR531X_ENET1),
+               .end = KSEG1ADDR(AR531X_ENET1 + 0x2000),
+       },
+       {
+               .name = "eth0_irq",
+               .flags = IORESOURCE_IRQ,
+               .start = AR5312_IRQ_ENET1_INTRS,
+               .end = AR5312_IRQ_ENET1_INTRS,
+       },
+};
+static struct ar531x_eth ar231x_eth0_data = {
+       .phy = 1,
+       .mac = 1,
+       .reset_base = AR531X_RESET,
+       .reset_mac = AR531X_RESET_ENET1,
+       .reset_phy = AR531X_RESET_EPHY1,
+       .phy_base = KSEG1ADDR(AR531X_ENET0),
+};
+static struct platform_device ar231x_eth0 = {
+       .id = 0,
+       .name = "ar531x-eth",
+       .dev.platform_data = &ar231x_eth0_data,
+       .resource = ar231x_eth0_res,
+       .num_resources = ARRAY_SIZE(ar231x_eth0_res)
+};
+
+
+static struct platform_device ar5312_wmac[] = {
+       {
+               .id = 0,
+               .name = "ar531x-wmac",
+       },
+       {
+               .id = 1,
+               .name = "ar531x-wmac",
+       },
+};
+
+static struct physmap_flash_data ar5312_flash_data = {
+       .width    = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+       .start  = AR531X_FLASH,
+       .end    = AR531X_FLASH + 0x800000 - 1,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+       .name      = "physmap-flash",
+       .id      = 0,
+       .dev            = {
+               .platform_data  = &ar5312_flash_data,
+       },
+       .num_resources  = 1,
+       .resource   = &ar5312_flash_resource,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5312_leds[] = {
+       { .name = "wlan", .gpio = 0, .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ar5312_led_data = {
+       .num_leds = ARRAY_SIZE(ar5312_leds),
+       .leds = (void *) ar5312_leds,
+};
+
+static struct platform_device ar5312_gpio_leds = {
+       .name = "leds-gpio",
+       .id = -1,
+       .dev = {
+               .platform_data = (void *) &ar5312_led_data,
+       }
+};
+#endif
+
+/*
+ * NB: This mapping size is larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+static char __init *ar5312_flash_limit(void)
+{
+       u32 ctl;
+       /*
+        * Configure flash bank 0.
+        * Assume 8M window size. Flash will be aliased if it's smaller
+        */
+       ctl = FLASHCTL_E |
+               FLASHCTL_AC_8M |
+               FLASHCTL_RBLE |
+               (0x01 << FLASHCTL_IDCY_S) |
+               (0x07 << FLASHCTL_WST1_S) |
+               (0x07 << FLASHCTL_WST2_S) |
+               (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW);
+
+       sysRegWrite(AR531X_FLASHCTL0, ctl);
+
+       /* Disable other flash banks */
+       sysRegWrite(AR531X_FLASHCTL1,
+               sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+       sysRegWrite(AR531X_FLASHCTL2,
+               sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC));
+
+       return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000);
+}
+
+static struct ar531x_config __init *init_wmac(int unit)
+{
+       struct ar531x_config *config;
+
+       config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+       config->board = board_config;
+       config->radio = radio_config;
+       config->unit = unit;
+       config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP);
+
+       return config;
+}
+
+int __init ar5312_init_devices(void)
+{
+       struct ar531x_boarddata *bcfg;
+       char *radio, *c;
+       int dev = 0;
+       uint32_t fctl = 0;
+
+       if (!is_5312)
+               return 0;
+
+       /* Locate board/radio config data */
+       ar531x_find_config(ar5312_flash_limit());
+       bcfg = (struct ar531x_boarddata *) board_config;
+
+
+       /*
+        * Chip IDs and hardware detection for some Atheros
+        * models are really broken!
+        *
+        * Atheros uses a disabled WMAC0 and Silicon ID of AR5312
+        * as indication for AR2312, which is otherwise
+        * indistinguishable from the real AR5312.
+        */
+       if (radio_config) {
+               radio = radio_config + AR531X_RADIO_MASK_OFF;
+               if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0)
+                       bcfg->config |= BD_ISCASPER;
+       } else
+               radio = NULL;
+
+       /* AR2313 has CPU minor rev. 10 */
+       if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+               mips_machtype = MACH_ATHEROS_AR2313;
+
+       /* AR2312 shares the same Silicon ID as AR5312 */
+       else if (bcfg->config & BD_ISCASPER)
+               mips_machtype = MACH_ATHEROS_AR2312;
+
+       /* Everything else is probably AR5312 or compatible */
+       else
+               mips_machtype = MACH_ATHEROS_AR5312;
+
+       ar5312_eth0_data.board_config = board_config;
+       ar5312_eth1_data.board_config = board_config;
+
+       /* fixup flash width */
+       fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW;
+       switch (fctl) {
+               case FLASHCTL_MWx16:
+                       ar5312_flash_data.width = 2;
+                       break;
+               case FLASHCTL_MWx8:
+               default:
+                       ar5312_flash_data.width = 1;
+                       break;
+       }
+
+       ar5312_devs[dev++] = &ar5312_physmap_flash;
+
+#ifdef CONFIG_LEDS_GPIO
+       ar5312_leds[0].gpio = bcfg->sysLedGpio;
+       ar5312_devs[dev++] = &ar5312_gpio_leds;
+#endif
+
+       if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6))
+               memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6);
+
+       if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) {
+               /* ENET0 and ENET1 have the same mac.
+                * Increment the one from ENET1 */
+               c = bcfg->enet1Mac + 5;
+               while ((c >= (char *) bcfg->enet1Mac) && !(++(*c)))
+                       c--;
+       }
+
+       switch(mips_machtype) {
+               case MACH_ATHEROS_AR5312:
+                       ar5312_eth0_data.macaddr = bcfg->enet0Mac;
+                       ar5312_eth1_data.macaddr = bcfg->enet1Mac;
+                       ar5312_devs[dev++] = &ar5312_eth[0];
+                       ar5312_devs[dev++] = &ar5312_eth[1];
+                       break;
+               case MACH_ATHEROS_AR2312:
+               case MACH_ATHEROS_AR2313:
+                       ar231x_eth0_data.macaddr = bcfg->enet0Mac;
+                       ar5312_devs[dev++] = &ar231x_eth0;
+                       ar5312_flash_data.width = 1;
+                       break;
+       }
+
+       if (radio) {
+               if (mips_machtype == MACH_ATHEROS_AR5312) {
+                       if (*((u32 *) radio) & AR531X_RADIO0_MASK) {
+                               ar5312_wmac[0].dev.platform_data = init_wmac(0);
+                               ar5312_devs[dev++] = &ar5312_wmac[0];
+                       }
+               }
+               if (*((u32 *) radio) & AR531X_RADIO1_MASK) {
+                       ar5312_wmac[1].dev.platform_data = init_wmac(1);
+                       ar5312_devs[dev++] = &ar5312_wmac[1];
+               }
+       }
+
+       return platform_add_devices(ar5312_devs, dev);
+}
+
+
+static void ar5312_halt(void)
+{
+        while (1);
+}
+
+static void ar5312_power_off(void)
+{
+        ar5312_halt();
+}
+
+
+static void ar5312_restart(char *command)
+{
+       /* reset the system */
+       for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM);
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+       1,
+       2,
+       4,
+       5
+};
+
+
+static unsigned int __init ar5312_cpu_frequency(void)
+{
+       unsigned int result;
+       unsigned int predivide_mask, predivide_shift;
+       unsigned int multiplier_mask, multiplier_shift;
+       unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier;
+       unsigned int doubler_mask;
+       unsigned int wisoc_revision;
+
+       /* Trust the bootrom's idea of cpu frequency. */
+       if ((result = sysRegRead(AR5312_SCRATCH)))
+               return result;
+
+       wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S;
+       if (wisoc_revision == AR531X_REV_MAJ_AR2313) {
+               predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+               predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+               multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+               multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+               doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+       } else { /* AR5312 and AR2312 */
+               predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+               predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+               multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+               multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+               doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+       }
+
+       /*
+        * Clocking is derived from a fixed 40MHz input clock.
+        *
+        *  cpuFreq = InputClock * MULT (where MULT is PLL multiplier)
+        *  sysFreq = cpuFreq / 4          (used for APB clock, serial,
+        *                                                         flash, Timer, Watchdog Timer)
+        *
+        *  cntFreq = cpuFreq / 2          (use for CPU count/compare)
+        *
+        * So, for example, with a PLL multiplier of 5, we have
+        *
+        *  cpuFreq = 200MHz
+        *  sysFreq = 50MHz
+        *  cntFreq = 100MHz
+        *
+        * We compute the CPU frequency, based on PLL settings.
+        */
+
+       clockCtl1 = sysRegRead(AR5312_CLOCKCTL1);
+       preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift;
+       preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect];
+       multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift;
+
+       if (clockCtl1 & doubler_mask) {
+               multiplier = multiplier << 1;
+       }
+       return (40000000 / preDivisor) * multiplier;
+}
+
+static inline int ar5312_sys_frequency(void)
+{
+       return ar5312_cpu_frequency() / 4;
+}
+
+static void __init ar5312_time_init(void)
+{
+       mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+
+void __init ar5312_prom_init(void)
+{
+       u32 memsize, memcfg, bank0AC, bank1AC;
+
+       is_5312 = 1;
+
+       /* Detect memory size */
+       memcfg = sysRegRead(AR531X_MEM_CFG1);
+       bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
+       bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
+       memsize = (bank0AC ? (1 << (bank0AC+1)) : 0)
+               + (bank1AC ? (1 << (bank1AC+1)) : 0);
+       memsize <<= 20;
+       add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+       /* Initialize it to AR5312 for now. Real detection will be done
+        * in ar5312_init_devices() */
+       mips_machtype = MACH_ATHEROS_AR5312;
+}
+
+void __init ar5312_plat_setup(void)
+{
+       /* Clear any lingering AHB errors */
+       sysRegRead(AR531X_PROCADDR);
+       sysRegRead(AR531X_DMAADDR);
+       sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION);
+
+       board_time_init = ar5312_time_init;
+
+       _machine_restart = ar5312_restart;
+       _machine_halt = ar5312_halt;
+       pm_power_off = ar5312_power_off;
+
+       serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency());
+}
+
+arch_initcall(ar5312_init_devices);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c
new file mode 100644 (file)
index 0000000..0cbdc8e
--- /dev/null
@@ -0,0 +1,174 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <ar531x.h>
+#include <gpio.h>
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5312_irq_dispatch(void)
+{
+       int pending = read_c0_status() & read_c0_cause();
+
+       if (pending & CAUSEF_IP2)
+               do_IRQ(AR5312_IRQ_WLAN0_INTRS);
+       else if (pending & CAUSEF_IP3)
+               do_IRQ(AR5312_IRQ_ENET0_INTRS);
+       else if (pending & CAUSEF_IP4)
+               do_IRQ(AR5312_IRQ_ENET1_INTRS);
+       else if (pending & CAUSEF_IP5)
+               do_IRQ(AR5312_IRQ_WLAN1_INTRS);
+       else if (pending & CAUSEF_IP6) {
+               unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR);
+
+               if (ar531x_misc_intrs & AR531X_ISR_TIMER) {
+                       do_IRQ(AR531X_MISC_IRQ_TIMER);
+                       (void)sysRegRead(AR531X_TIMER);
+               } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC)
+                       do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+               else if ((ar531x_misc_intrs & AR531X_ISR_UART0))
+                       do_IRQ(AR531X_MISC_IRQ_UART0);
+               else if (ar531x_misc_intrs & AR531X_ISR_WD)
+                       do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+               else
+                       do_IRQ(AR531X_MISC_IRQ_NONE);
+       } else if (pending & CAUSEF_IP7) {
+               do_IRQ(AR531X_IRQ_CPU_CLOCK);
+       }
+}
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_enable(unsigned int irq)
+{
+       unsigned int imr;
+
+       imr = sysRegRead(AR531X_IMR);
+       imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+       sysRegWrite(AR531X_IMR, imr);
+       sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_disable(unsigned int irq)
+{
+       unsigned int imr;
+
+       imr = sysRegRead(AR531X_IMR);
+       imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1));
+       sysRegWrite(AR531X_IMR, imr);
+       sysRegRead(AR531X_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5312_misc_intr_startup(unsigned int irq)
+{
+       ar5312_misc_intr_enable(irq);
+       return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5312_misc_intr_shutdown(unsigned int irq)
+{
+       ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_ack(unsigned int irq)
+{
+       ar5312_misc_intr_disable(irq);
+}
+
+static void
+ar5312_misc_intr_end(unsigned int irq)
+{
+       if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+               ar5312_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5312_misc_intr_controller = {
+       .typename       = "AR5312 misc",
+       .startup        = ar5312_misc_intr_startup,
+       .shutdown       = ar5312_misc_intr_shutdown,
+       .enable         = ar5312_misc_intr_enable,
+       .disable        = ar5312_misc_intr_disable,
+       .ack            = ar5312_misc_intr_ack,
+       .end            = ar5312_misc_intr_end,
+};
+
+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
+{
+       u32 proc1 = sysRegRead(AR531X_PROC1);
+       u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */
+       u32 dma1 = sysRegRead(AR531X_DMA1);
+       u32 dmaAddr = sysRegRead(AR531X_DMAADDR);   /* clears error state */
+
+       printk("AHB interrupt: PROCADDR=0x%8.8x  PROC1=0x%8.8x  DMAADDR=0x%8.8x  DMA1=0x%8.8x\n",
+                       procAddr, proc1, dmaAddr, dma1);
+
+       machine_restart("AHB error"); /* Catastrophic failure */
+       return IRQ_HANDLED;
+}
+
+
+static struct irqaction ar5312_ahb_proc_interrupt  = {
+       .handler        = ar5312_ahb_proc_handler,
+       .flags          = IRQF_DISABLED,
+       .name           = "ar5312_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade  = {
+       .handler        = no_action,
+       .flags          = IRQF_DISABLED,
+       .name           = "cascade",
+};
+
+void __init ar5312_misc_intr_init(int irq_base)
+{
+       int i;
+
+       for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+               irq_desc[i].status = IRQ_DISABLED;
+               irq_desc[i].action = NULL;
+               irq_desc[i].depth = 1;
+               irq_desc[i].chip = &ar5312_misc_intr_controller;
+       }
+       setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
+       setup_irq(AR5312_IRQ_MISC_INTRS, &cascade);
+}
+
+
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile
new file mode 100644 (file)
index 0000000..9b90011
--- /dev/null
@@ -0,0 +1,12 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2007 FON Technology, SL.
+# Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y := board.o irq.o
+obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c
new file mode 100644 (file)
index 0000000..6ee75a9
--- /dev/null
@@ -0,0 +1,414 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <ar531x.h>
+#include <linux/leds.h>
+#include <asm/gpio.h>
+
+static int is_5315 = 0;
+
+static struct resource ar5315_eth_res[] = {
+       {
+               .name = "eth0_membase",
+               .flags = IORESOURCE_MEM,
+               .start = AR5315_ENET0,
+               .end = AR5315_ENET0 + 0x2000,
+       },
+       {
+               .name = "eth0_irq",
+               .flags = IORESOURCE_IRQ,
+               .start = AR5315_IRQ_ENET0_INTRS,
+               .end = AR5315_IRQ_ENET0_INTRS,
+       },
+};
+
+static struct ar531x_eth ar5315_eth_data = {
+       .phy = 1,
+       .mac = 0,
+       .reset_base = AR5315_RESET,
+       .reset_mac = AR5315_RESET_ENET0,
+       .reset_phy = AR5315_RESET_EPHY0,
+       .phy_base = AR5315_ENET0
+};
+
+static struct platform_device ar5315_eth = {
+       .id = 0,
+       .name = "ar531x-eth",
+       .dev.platform_data = &ar5315_eth_data,
+       .resource = ar5315_eth_res,
+       .num_resources = ARRAY_SIZE(ar5315_eth_res)
+};
+
+static struct platform_device ar5315_wmac = {
+       .id = 0,
+       .name = "ar531x-wmac",
+       /* FIXME: add resources */
+};
+
+static struct resource ar5315_spiflash_res[] = {
+       {
+               .name = "flash_base",
+               .flags = IORESOURCE_MEM,
+               .start = KSEG1ADDR(AR5315_SPI_READ),
+               .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000,
+       },
+       {
+               .name = "flash_regs",
+               .flags = IORESOURCE_MEM,
+               .start = 0x11300000,
+               .end = 0x11300012,
+       },
+};
+
+static struct platform_device ar5315_spiflash = {
+       .id = 0,
+       .name = "spiflash",
+       .resource = ar5315_spiflash_res,
+       .num_resources = ARRAY_SIZE(ar5315_spiflash_res)
+};
+
+#ifdef CONFIG_LEDS_GPIO
+static struct gpio_led ar5315_leds[8];
+
+static struct gpio_led_platform_data ar5315_led_data = {
+       .num_leds = ARRAY_SIZE(ar5315_leds),
+       .leds = (void *) ar5315_leds,
+};
+
+static struct platform_device ar5315_gpio_leds = {
+       .name = "leds-gpio",
+       .id = -1,
+       .dev = {
+               .platform_data = (void *) &ar5315_led_data,
+       }
+};
+#endif
+
+static struct platform_device ar5315_wdt =
+{
+       .id = 0,
+       .name = "ar2315_wdt",
+};
+
+static __initdata struct platform_device *ar5315_devs[6];
+
+static void *flash_regs;
+
+static inline __u32 spiflash_regread32(int reg)
+{
+       volatile __u32 *data = (__u32 *)(flash_regs + reg);
+
+       return (*data);
+}
+
+static inline void spiflash_regwrite32(int reg, __u32 data)
+{
+       volatile __u32 *addr = (__u32 *)(flash_regs + reg);
+
+       *addr = data;
+}
+
+#define SPI_FLASH_CTL      0x00
+#define SPI_FLASH_OPCODE   0x04
+#define SPI_FLASH_DATA     0x08
+
+static __u8 spiflash_probe(void)
+{
+        __u32 reg;
+
+       do {
+               reg = spiflash_regread32(SPI_FLASH_CTL);
+       } while (reg & SPI_CTL_BUSY);
+
+       spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab);
+
+       reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 |
+               (1 << 4) | SPI_CTL_START;
+
+       spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+       do {
+               reg = spiflash_regread32(SPI_FLASH_CTL);
+       } while (reg & SPI_CTL_BUSY);
+
+       reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+       reg &= 0xff;
+
+       return (u8) reg;
+}
+
+
+#define STM_8MBIT_SIGNATURE     0x13
+#define STM_16MBIT_SIGNATURE    0x14
+#define STM_32MBIT_SIGNATURE    0x15
+#define STM_64MBIT_SIGNATURE    0x16
+#define STM_128MBIT_SIGNATURE   0x17
+
+
+static char __init *ar5315_flash_limit(void)
+{
+       u8 sig;
+       u32 flash_size = 0;
+
+       /* probe the flash chip size */
+       flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start);
+       sig = spiflash_probe();
+       iounmap(flash_regs);
+
+       switch(sig) {
+               case STM_8MBIT_SIGNATURE:
+                       flash_size = 0x00100000;
+                       break;
+               case STM_16MBIT_SIGNATURE:
+                       flash_size = 0x00200000;
+                       break;
+               case STM_32MBIT_SIGNATURE:
+                       flash_size = 0x00400000;
+                       break;
+               case STM_64MBIT_SIGNATURE:
+                       flash_size = 0x00800000;
+                       break;
+               case STM_128MBIT_SIGNATURE:
+                       flash_size = 0x01000000;
+                       break;
+       }
+
+       ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size;
+       return (char *) ar5315_spiflash_res[0].end;
+}
+
+int __init ar5315_init_devices(void)
+{
+       struct ar531x_config *config;
+       struct ar531x_boarddata *bcfg;
+       int dev = 0;
+#ifdef CONFIG_LEDS_GPIO
+       int i;
+       char *tmp;
+#endif
+
+       if (!is_5315)
+               return 0;
+
+       /* Find board configuration */
+       ar531x_find_config(ar5315_flash_limit());
+       bcfg = (struct ar531x_boarddata *) board_config;
+
+       config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL);
+       config->board = board_config;
+       config->radio = radio_config;
+       config->unit = 0;
+       config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP);
+
+       ar5315_eth_data.board_config = board_config;
+       ar5315_eth_data.macaddr = bcfg->enet0Mac;
+       ar5315_wmac.dev.platform_data = config;
+
+       ar5315_devs[dev++] = &ar5315_eth;
+       ar5315_devs[dev++] = &ar5315_wmac;
+       ar5315_devs[dev++] = &ar5315_spiflash;
+       ar5315_devs[dev++] = &ar5315_wdt;
+
+#ifdef CONFIG_LEDS_GPIO
+       ar5315_led_data.num_leds = 0;
+       for(i = 1; i < 8; i++)
+       {
+               if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio))
+               {
+                       if(i == bcfg->sysLedGpio)
+                       {
+                               tmp = kstrdup("wlan", GFP_KERNEL);
+                       } else {
+                               tmp = kmalloc(6, GFP_KERNEL);
+                               if(tmp)
+                                       sprintf((char*)tmp, "gpio%d", i);
+                       }
+                       if(tmp)
+                       {
+                               ar5315_leds[ar5315_led_data.num_leds].name = tmp;
+                               ar5315_leds[ar5315_led_data.num_leds].gpio = i;
+                               ar5315_leds[ar5315_led_data.num_leds].active_low = 0;
+                               ar5315_led_data.num_leds++;
+                       } else {
+                               printk("failed to alloc led string\n");
+                               continue;
+                       }
+               }
+       }
+       ar5315_devs[dev++] = &ar5315_gpio_leds;
+#endif
+
+       return platform_add_devices(ar5315_devs, dev);
+}
+
+static void ar5315_halt(void)
+{
+        while (1);
+}
+
+static void ar5315_power_off(void)
+{
+        ar5315_halt();
+}
+
+
+static void ar5315_restart(char *command)
+{
+       void (*mips_reset_vec)(void) = (void *) 0xbfc00000;
+
+       /* reset the system */
+       sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM);
+
+       /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround.
+        * give it some time to attempt a gpio based hardware reset
+        * (atheros reference design workaround) */
+       gpio_direction_output(AR5315_RESET_GPIO, 0);
+       mdelay(100);
+
+       /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+        * workaround. Attempt to jump to the mips reset location -
+        * the boot loader itself might be able to recover the system */
+       mips_reset_vec();
+}
+
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = {
+    1,
+    2,
+    4,
+    5
+};
+
+static int __initdata PLLC_DIVIDE_TABLE[5] = {
+    2,
+    3,
+    4,
+    6,
+    3
+};
+
+static unsigned int __init
+ar5315_sys_clk(unsigned int clockCtl)
+{
+    unsigned int pllcCtrl,cpuDiv;
+    unsigned int pllcOut,refdiv,fdiv,divby2;
+       unsigned int clkDiv;
+
+    pllcCtrl = sysRegRead(AR5315_PLLC_CTL);
+    refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
+    refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv];
+    fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
+    divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
+    divby2 += 1;
+    pllcOut = (40000000/refdiv)*(2*divby2)*fdiv;
+
+
+    /* clkm input selected */
+       switch(clockCtl & CPUCLK_CLK_SEL_M) {
+               case 0:
+               case 1:
+                       clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S];
+                       break;
+               case 2:
+                       clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S];
+                       break;
+               default:
+                       pllcOut = 40000000;
+                       clkDiv = 1;
+                       break;
+       }
+       cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
+       cpuDiv = cpuDiv * 2 ?: 1;
+       return (pllcOut/(clkDiv * cpuDiv));
+}
+
+static inline unsigned int ar5315_cpu_frequency(void)
+{
+    return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK));
+}
+
+static inline unsigned int ar5315_apb_frequency(void)
+{
+    return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK));
+}
+
+static void __init ar5315_time_init(void)
+{
+       mips_hpt_frequency = ar5315_cpu_frequency() / 2;
+}
+
+void __init ar5315_prom_init(void)
+{
+       u32 memsize, memcfg, devid;
+
+       is_5315 = 1;
+       memcfg = sysRegRead(AR5315_MEM_CFG);
+       memsize   = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
+       memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
+       memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
+       memsize <<= 3;
+       add_memory_region(0, memsize, BOOT_MEM_RAM);
+
+       /* Detect the hardware based on the device ID */
+       devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP;
+       switch(devid) {
+               case 0x90:
+               case 0x91:
+                       mips_machtype = MACH_ATHEROS_AR2317;
+                       break;
+               default:
+                       mips_machtype = MACH_ATHEROS_AR2315;
+                       break;
+       }
+}
+
+void __init ar5315_plat_setup(void)
+{
+       unsigned int config = read_c0_config();
+
+       /* Clear any lingering AHB errors */
+       write_c0_config(config & ~0x3);
+       sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+       sysRegRead(AR5315_AHB_ERR1);
+       sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION);
+
+       board_time_init = ar5315_time_init;
+
+       _machine_restart = ar5315_restart;
+       _machine_halt = ar5315_halt;
+       pm_power_off = ar5315_power_off;
+
+       serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency());
+}
+
+arch_initcall(ar5315_init_devices);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c
new file mode 100644 (file)
index 0000000..581b1a4
--- /dev/null
@@ -0,0 +1,359 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+
+#include <ar531x.h>
+#include <gpio.h>
+
+static u32 gpiointmask = 0, gpiointval = 0;
+
+static inline void ar5315_gpio_irq(void)
+{
+       u32 pend;
+       sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
+
+       /* only do one gpio interrupt at a time */
+       pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask;
+       if (!pend)
+               return;
+
+       do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1);
+}
+
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+asmlinkage void ar5315_irq_dispatch(void)
+{
+       int pending = read_c0_status() & read_c0_cause();
+
+       if (pending & CAUSEF_IP3)
+               do_IRQ(AR5315_IRQ_WLAN0_INTRS);
+       else if (pending & CAUSEF_IP4)
+               do_IRQ(AR5315_IRQ_ENET0_INTRS);
+#ifdef CONFIG_PCI
+       else if (pending & CAUSEF_IP5)
+               ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI);
+#endif
+       else if (pending & CAUSEF_IP2) {
+               unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR);
+
+               if (ar531x_misc_intrs & AR5315_ISR_SPI)
+                       do_IRQ(AR531X_MISC_IRQ_SPI);
+               else if (ar531x_misc_intrs & AR5315_ISR_TIMER)
+                       do_IRQ(AR531X_MISC_IRQ_TIMER);
+               else if (ar531x_misc_intrs & AR5315_ISR_AHB)
+                       do_IRQ(AR531X_MISC_IRQ_AHB_PROC);
+               else if (ar531x_misc_intrs & AR5315_ISR_GPIO)
+                       ar5315_gpio_irq();
+               else if (ar531x_misc_intrs & AR5315_ISR_UART0)
+                       do_IRQ(AR531X_MISC_IRQ_UART0);
+               else if (ar531x_misc_intrs & AR5315_ISR_WD)
+                       do_IRQ(AR531X_MISC_IRQ_WATCHDOG);
+               else
+                       do_IRQ(AR531X_MISC_IRQ_NONE);
+       } else if (pending & CAUSEF_IP7)
+               do_IRQ(AR531X_IRQ_CPU_CLOCK);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_abort_irq(void)
+{
+       sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT);
+       (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
+}
+
+static inline void pci_ack_irq(void)
+{
+       sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT);
+       (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */
+}
+
+void ar5315_pci_irq(int irq)
+{
+       if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT)
+               pci_abort_irq();
+       else {
+               do_IRQ(irq);
+               pci_ack_irq();
+       }
+}
+#endif
+
+static void ar5315_gpio_intr_enable(unsigned int irq)
+{
+       u32 gpio, mask;
+       gpio = irq - AR531X_GPIO_IRQ_BASE;
+       mask = 1 << gpio;
+       gpiointmask |= mask;
+
+       /* reconfigure GPIO line as input */
+       sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio));
+
+       /* Enable interrupt with edge detection */
+       sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3));
+}
+
+static void ar5315_gpio_intr_disable(unsigned int irq)
+{
+       u32 gpio, mask;
+       gpio = irq - AR531X_GPIO_IRQ_BASE;
+       mask = 1 << gpio;
+
+       gpiointmask &= ~mask;
+
+       /* Disable interrupt with edge detection */
+       sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0));
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int ar5315_gpio_intr_startup(unsigned int irq)
+{
+       ar5315_gpio_intr_enable(irq);
+       return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_gpio_intr_shutdown(unsigned int irq)
+{
+       ar5315_gpio_intr_disable(irq);
+}
+
+static void
+ar5315_gpio_intr_ack(unsigned int irq)
+{
+       ar5315_gpio_intr_disable(irq);
+}
+
+static void
+ar5315_gpio_intr_end(unsigned int irq)
+{
+       if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+               ar5315_gpio_intr_enable(irq);
+}
+
+static struct irq_chip ar5315_gpio_intr_controller = {
+       .typename       = "AR5315 GPIO",
+       .startup        = ar5315_gpio_intr_startup,
+       .shutdown       = ar5315_gpio_intr_shutdown,
+       .enable         = ar5315_gpio_intr_enable,
+       .disable        = ar5315_gpio_intr_disable,
+       .ack            = ar5315_gpio_intr_ack,
+       .end            = ar5315_gpio_intr_end,
+};
+
+
+/* Enable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_enable(unsigned int irq)
+{
+       unsigned int imr;
+
+       imr = sysRegRead(AR5315_IMR);
+       switch(irq)
+       {
+          case AR531X_MISC_IRQ_SPI:
+                imr |= AR5315_ISR_SPI;
+                break;
+
+          case AR531X_MISC_IRQ_TIMER:
+            imr |= AR5315_ISR_TIMER;
+            break;
+
+          case AR531X_MISC_IRQ_AHB_PROC:
+            imr |= AR5315_ISR_AHB;
+            break;
+
+          case AR531X_MISC_IRQ_AHB_DMA:
+            imr |= 0/* ?? */;
+            break;
+
+          case AR531X_MISC_IRQ_GPIO:
+            imr |= AR5315_ISR_GPIO;
+            break;
+
+          case AR531X_MISC_IRQ_UART0:
+            imr |= AR5315_ISR_UART0;
+            break;
+
+
+          case AR531X_MISC_IRQ_WATCHDOG:
+            imr |= AR5315_ISR_WD;
+            break;
+
+          case AR531X_MISC_IRQ_LOCAL:
+            imr |= 0/* ?? */;
+            break;
+
+       }
+       sysRegWrite(AR5315_IMR, imr);
+       imr=sysRegRead(AR5315_IMR); /* flush write buffer */
+}
+
+/* Disable the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_disable(unsigned int irq)
+{
+       unsigned int imr;
+
+       imr = sysRegRead(AR5315_IMR);
+       switch(irq)
+       {
+          case AR531X_MISC_IRQ_SPI:
+                imr &= ~AR5315_ISR_SPI;
+                break;
+
+          case AR531X_MISC_IRQ_TIMER:
+            imr &= (~AR5315_ISR_TIMER);
+            break;
+
+          case AR531X_MISC_IRQ_AHB_PROC:
+            imr &= (~AR5315_ISR_AHB);
+            break;
+
+          case AR531X_MISC_IRQ_AHB_DMA:
+            imr &= 0/* ?? */;
+            break;
+
+          case AR531X_MISC_IRQ_GPIO:
+            imr &= ~AR5315_ISR_GPIO;
+            break;
+
+          case AR531X_MISC_IRQ_UART0:
+            imr &= (~AR5315_ISR_UART0);
+            break;
+
+          case AR531X_MISC_IRQ_WATCHDOG:
+            imr &= (~AR5315_ISR_WD);
+            break;
+
+          case AR531X_MISC_IRQ_LOCAL:
+            imr &= ~0/* ?? */;
+            break;
+
+       }
+       sysRegWrite(AR5315_IMR, imr);
+       sysRegRead(AR5315_IMR); /* flush write buffer */
+}
+
+/* Turn on the specified AR531X_MISC_IRQ interrupt */
+static unsigned int
+ar5315_misc_intr_startup(unsigned int irq)
+{
+       ar5315_misc_intr_enable(irq);
+       return 0;
+}
+
+/* Turn off the specified AR531X_MISC_IRQ interrupt */
+static void
+ar5315_misc_intr_shutdown(unsigned int irq)
+{
+       ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_ack(unsigned int irq)
+{
+       ar5315_misc_intr_disable(irq);
+}
+
+static void
+ar5315_misc_intr_end(unsigned int irq)
+{
+       if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+               ar5315_misc_intr_enable(irq);
+}
+
+static struct irq_chip ar5315_misc_intr_controller = {
+       .typename       = "AR5315 misc",
+       .startup        = ar5315_misc_intr_startup,
+       .shutdown       = ar5315_misc_intr_shutdown,
+       .enable         = ar5315_misc_intr_enable,
+       .disable        = ar5315_misc_intr_disable,
+       .ack            = ar5315_misc_intr_ack,
+       .end            = ar5315_misc_intr_end,
+};
+
+static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id)
+{
+    sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET);
+    sysRegRead(AR5315_AHB_ERR1);
+
+    printk("AHB fatal error\n");
+    machine_restart("AHB error"); /* Catastrophic failure */
+
+    return IRQ_HANDLED;
+}
+
+static struct irqaction ar5315_ahb_proc_interrupt  = {
+       .handler        = ar5315_ahb_proc_handler,
+       .flags          = IRQF_DISABLED,
+       .name           = "ar5315_ahb_proc_interrupt",
+};
+
+
+static struct irqaction cascade  = {
+       .handler        = no_action,
+       .flags          = IRQF_DISABLED,
+       .name           = "cascade",
+};
+
+static void ar5315_gpio_intr_init(int irq_base)
+{
+       int i;
+
+       for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) {
+               irq_desc[i].status = IRQ_DISABLED;
+               irq_desc[i].action = NULL;
+               irq_desc[i].depth = 1;
+               irq_desc[i].chip = &ar5315_gpio_intr_controller;
+       }
+       setup_irq(AR531X_MISC_IRQ_GPIO, &cascade);
+       gpiointval = sysRegRead(AR5315_GPIO_DI);
+}
+
+void ar5315_misc_intr_init(int irq_base)
+{
+       int i;
+
+       for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) {
+               irq_desc[i].status = IRQ_DISABLED;
+               irq_desc[i].action = NULL;
+               irq_desc[i].depth = 1;
+               irq_desc[i].chip = &ar5315_misc_intr_controller;
+       }
+       setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt);
+       setup_irq(AR5315_IRQ_MISC_INTRS, &cascade);
+       ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE);
+}
+
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c
new file mode 100644 (file)
index 0000000..166fa1c
--- /dev/null
@@ -0,0 +1,265 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/paccess.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+#include "ar531x.h"
+
+#define AR531X_MEM_BASE    0x80800000UL
+#define AR531X_MEM_SIZE    0x00ffffffUL
+#define AR531X_IO_SIZE     0x00007fffUL
+#define IDSEL_SHIFT    13
+
+static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED;
+static u32 cfgaddr;
+
+static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write)
+{
+       u32 address;      /* Address to read from */
+       u32 reg;
+       unsigned long flags;
+       int ret = -1;
+       if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2))
+               return ret;
+
+       spin_lock_irqsave(&ar531x_pci_lock, flags);
+
+       /* Select Configuration access */
+       reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+       reg |= AR5315_PCIMISC_CFG_SEL;
+       sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+       (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+       address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where;
+
+       if (size == 1)
+               address ^= 0x3;
+       else if (size == 2)
+               address ^= 0x2;
+
+       if (write) {
+               if (size == 1)
+                       ret = put_dbe(ptr, (u8 *) address);
+               else if (size == 2)
+                       ret = put_dbe(ptr, (u16 *) address);
+               else if (size == 4)
+                       ret = put_dbe(ptr, (u32 *) address);
+       } else {
+               if (size == 1)
+                       ret = get_dbe(*((u32 *)ptr), (u8 *) address);
+               else if (size == 2)
+                       ret = get_dbe(*((u32 *)ptr), (u16 *) address);
+               else if (size == 4)
+                       ret = get_dbe(*((u32 *)ptr), (u32 *) address);
+       }
+
+       /* Select Memory access */
+       reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+       reg &= ~AR5315_PCIMISC_CFG_SEL;
+       sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+       (void)sysRegRead(AR5315_PCI_MISC_CONFIG);
+
+       spin_unlock_irqrestore(&ar531x_pci_lock, flags);
+
+       if (ret) {
+               *((u32 *)ptr) = 0xffffffff;
+               return PCIBIOS_DEVICE_NOT_FOUND;
+       }
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value)
+{
+       return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0);
+}
+
+static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+       return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1);
+}
+
+struct pci_ops ar531x_pci_ops = {
+       .read   = ar531x_pci_read,
+       .write  = ar531x_pci_write,
+};
+
+static struct resource ar531x_mem_resource = {
+       .name   = "AR531x PCI MEM",
+       .start  = AR531X_MEM_BASE,
+       .end    = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct resource ar531x_io_resource = {
+       .name   = "AR531x PCI I/O",
+       .start  = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE,
+       .end    = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1,
+       .flags  = IORESOURCE_IO,
+};
+
+struct pci_controller ar531x_pci_controller = {
+       .pci_ops                = &ar531x_pci_ops,
+       .mem_resource   = &ar531x_mem_resource,
+       .io_resource    = &ar531x_io_resource,
+       .mem_offset     = 0x00000000UL,
+       .io_offset      = 0x00000000UL,
+};
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+       return AR5315_IRQ_LCBUS_PCI;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+       u32 reg;
+
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5);
+       pci_write_config_word(dev, 0x40, 0);
+
+       /* Clear any pending Abort or external Interrupts 
+        * and enable interrupt processing */
+       reg = sysRegRead(AR5315_PCI_INTEN_REG);
+       reg &= ~AR5315_PCI_INT_ENABLE;
+       sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+       reg = sysRegRead(AR5315_PCI_INT_STATUS);
+       reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT);
+       sysRegWrite(AR5315_PCI_INT_STATUS, reg);
+
+       reg = sysRegRead(AR5315_PCI_INT_MASK);
+       reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT);
+       sysRegWrite(AR5315_PCI_INT_MASK, reg);
+
+       reg = sysRegRead(AR5315_PCI_INTEN_REG);
+       reg |= AR5315_PCI_INT_ENABLE;
+       sysRegWrite(AR5315_PCI_INTEN_REG, reg);
+
+       return 0;
+}
+
+static void ar5315_pci_fixup(struct pci_dev *dev)
+{
+       struct pci_bus *bus = dev->bus;
+
+       if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0))
+               return;
+
+#define _DEV   bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)
+       printk("PCI: fixing up device %d,%d,%d\n", _DEV);
+       /* fix up mbars */
+       config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1);
+       config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1);
+       config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1);
+       config_access(_DEV, PCI_COMMAND, 4,
+               PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL|
+               PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR|
+               PCI_COMMAND_FAST_BACK, 1);
+#undef _DEV
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup);
+
+int __init ar5315_pci_init(void)
+{
+       u32 reg;
+
+       if (mips_machtype != MACH_ATHEROS_AR2315)
+               return -ENODEV;
+
+       printk("AR531x PCI init... \n");
+
+       cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */
+       ar531x_pci_controller.io_map_base =
+               (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE);
+       set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */
+
+       reg = sysRegRead(AR5315_RESET);
+       sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA);
+
+       udelay(10*1000);
+
+       sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA);
+       sysRegRead(AR5315_RESET);     /* read after */
+
+       udelay(10*1000);
+
+       reg = sysRegRead(AR5315_ENDIAN_CTL);
+       reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE;
+
+       sysRegWrite(AR5315_ENDIAN_CTL, reg);
+
+       reg = sysRegRead(AR5315_PCICLK);
+       reg = 4;
+       sysRegWrite(AR5315_PCICLK, reg);
+
+       reg = sysRegRead(AR5315_AHB_ARB_CTL);
+       reg |= (ARB_PCI);
+       sysRegWrite(AR5315_AHB_ARB_CTL, reg);
+
+       reg = sysRegRead(AR5315_IF_CTL);
+       reg &= ~(IF_PCI_CLK_MASK | IF_MASK);
+       reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT));
+
+       sysRegWrite(AR5315_IF_CTL, reg);
+
+       /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */
+       reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+       reg &= ~(AR5315_PCIMISC_RST_MODE);
+       reg |= AR5315_PCIRST_LOW;
+       sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+       /* wait for 100 ms */
+       udelay(100*1000);
+
+       /* Bring the PCI out of reset */
+       reg = sysRegRead(AR5315_PCI_MISC_CONFIG);
+       reg &= ~(AR5315_PCIMISC_RST_MODE);
+       reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8);
+       sysRegWrite(AR5315_PCI_MISC_CONFIG, reg);
+
+       sysRegWrite(AR5315_PCI_UNCACHE_CFG,
+                       0x1E | /* 1GB uncached */
+                       (1 << 5) | /* Enable uncached */
+                       (0x2 << 30) /* Base: 0x80000000 */
+       );
+       (void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */
+
+       udelay(500*1000);
+
+       /* dirty hack - anyone with a datasheet that knows the memory map ? */
+       ioport_resource.start = 0x10000000;
+       ioport_resource.end = 0xffffffff;
+       iomem_resource.start = 0x10000000;
+       iomem_resource.end = 0xffffffff;
+
+       register_pci_controller(&ar531x_pci_controller);
+
+       printk("done\n");
+       return 0;
+}
+
+arch_initcall(ar5315_pci_init);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c
new file mode 100644 (file)
index 0000000..4a22493
--- /dev/null
@@ -0,0 +1,299 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Platform devices for Atheros SoCs
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/random.h>
+#include <asm/bootinfo.h>
+#include <asm/irq_cpu.h>
+#include <asm/io.h>
+#include <ar531x.h>
+
+char *board_config = NULL;
+char *radio_config = NULL;
+int broken_boarddata = 0;
+
+extern int early_serial_setup(struct uart_port *port);
+
+static inline bool
+check_radio_magic(unsigned char *addr)
+{
+       addr += 0x7a; /* offset for flash magic */
+       if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) {
+               return 1;
+       }
+       return 0;
+}
+
+static inline bool
+check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken)
+{
+       /* config magic found */
+       if ( *(int *)addr == 0x35333131)
+               return 1;
+
+       if (!broken)
+               return 0;
+
+       if (check_radio_magic(addr + 0xf8))
+               radio_config = addr + 0xf8;
+       if ((addr < flash_limit + 0x10000) &&
+            check_radio_magic(addr + 0x10000))
+               radio_config = addr + 0x10000;
+
+       if (radio_config) {
+               /* broken board data detected, use radio data to find the offset,
+                * user will fix this */
+               broken_boarddata = 1;
+               return 1;
+       }
+       return 0;
+}
+
+static u8 *find_board_config(char *flash_limit, bool broken)
+{
+       char *addr;
+       int found = 0;
+
+       for (addr = (char *) (flash_limit - 0x1000);
+               addr >= (char *) (flash_limit - 0x30000);
+               addr -= 0x1000) {
+
+               if (check_board_data(flash_limit, addr, broken)) {
+                       found = 1;
+                       break;
+               }
+       }
+
+       if (!found)
+               addr = NULL;
+
+       return addr;
+}
+
+static u8 *find_radio_config(char *flash_limit, char *board_config)
+{
+       int dataFound;
+       char *radio_config;
+
+       /*
+        * Now find the start of Radio Configuration data, using heuristics:
+        * Search forward from Board Configuration data by 0x1000 bytes
+        * at a time until we find non-0xffffffff.
+        */
+       dataFound = 0;
+       for (radio_config = board_config + 0x1000;
+            (radio_config < flash_limit);
+            radio_config += 0x1000) {
+               if ((*(u32 *)radio_config != 0xffffffff) &&
+                   check_radio_magic(radio_config)) {
+                       dataFound = 1;
+                       break;
+               }
+       }
+
+#ifdef CONFIG_ATHEROS_AR5315
+       if (!dataFound) { /* AR2316 relocates radio config to new location */
+           for (radio_config = board_config + 0xf8;
+               (radio_config < flash_limit - 0x1000 + 0xf8);
+                        radio_config += 0x1000) {
+                       if ((*(u32 *)radio_config != 0xffffffff) &&
+                               check_radio_magic(radio_config)) {
+                               dataFound = 1;
+                               break;
+                       }
+           }
+       }
+#endif
+
+       if (!dataFound) {
+               printk("Could not find Radio Configuration data\n");
+               radio_config = 0;
+       }
+
+       return (u8 *) radio_config;
+}
+
+int __init ar531x_find_config(char *flash_limit)
+{
+       struct ar531x_boarddata *bd;
+       unsigned int rcfg_size;
+       char *bcfg, *rcfg;
+
+       /* Copy the board and radio data to RAM, because with the new
+        * spiflash driver, accessing the mapped memory directly is no
+        * longer safe */
+
+       bcfg = find_board_config(flash_limit, false);
+       if (!bcfg)
+               bcfg = find_board_config(flash_limit, true);
+       if (!bcfg) {
+               printk("WARNING: No board configuration data found!\n");
+               return -ENODEV;
+       }
+
+       board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+       memcpy(board_config, bcfg, 0x100);
+       if (broken_boarddata) {
+               printk("WARNING: broken board data detected\n");
+               bd = (struct ar531x_boarddata *)board_config;
+               if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) {
+                       printk("Fixing up empty mac addresses\n");
+                       bd->enet0Mac[1] = 0x13;
+                       bd->enet0Mac[2] = 0x37;
+                       get_random_bytes(bd->enet0Mac + 3, 3);
+                       bd->wlan0Mac[1] = 0x13;
+                       bd->wlan0Mac[2] = 0x37;
+                       get_random_bytes(bd->wlan0Mac + 3, 3);
+               }
+       }
+
+
+       /* Radio config starts 0x100 bytes after board config, regardless
+        * of what the physical layout on the flash chip looks like */
+
+       if (radio_config)
+               rcfg = radio_config;
+       else
+               rcfg = find_radio_config(flash_limit, bcfg);
+
+       if (!rcfg)
+               return -ENODEV;
+
+       radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff);
+       printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config);
+       rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config);
+       memcpy(radio_config, rcfg, rcfg_size);
+
+       return 0;
+}
+
+void __init serial_setup(unsigned long mapbase, unsigned int uartclk)
+{
+       struct uart_port s;
+
+       memset(&s, 0, sizeof(s));
+
+       s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+       s.iotype = UPIO_MEM;
+       s.irq = AR531X_MISC_IRQ_UART0;
+       s.regshift = 2;
+       s.mapbase = mapbase;
+       s.uartclk = uartclk;
+       s.membase = (void __iomem *)s.mapbase;
+
+       early_serial_setup(&s);
+}
+
+void __init plat_mem_setup(void)
+{
+       DO_AR5312(ar5312_plat_setup();)
+       DO_AR5315(ar5315_plat_setup();)
+
+       /* Disable data watchpoints */
+       write_c0_watchlo0(0);
+}
+
+const char *get_system_type(void)
+{
+       switch (mips_machtype) {
+#ifdef CONFIG_ATHEROS_AR5312
+       case MACH_ATHEROS_AR5312:
+               return "Atheros AR5312";
+
+       case MACH_ATHEROS_AR2312:
+               return "Atheros AR2312";
+
+       case MACH_ATHEROS_AR2313:
+               return "Atheros AR2313";
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+       case MACH_ATHEROS_AR2315:
+               return "Atheros AR2315";
+       case MACH_ATHEROS_AR2316:
+               return "Atheros AR2316";
+       case MACH_ATHEROS_AR2317:
+               return "Atheros AR2317";
+       case MACH_ATHEROS_AR2318:
+               return "Atheros AR2318";
+#endif
+       }
+       return "Atheros (unknown)";
+}
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
+void __init plat_timer_setup(struct irqaction *irq)
+{
+       unsigned int count;
+
+       /* Usually irq is timer_irqaction (timer_interrupt) */
+       setup_irq(AR531X_IRQ_CPU_CLOCK, irq);
+
+       /* to generate the first CPU timer interrupt */
+       count = read_c0_count();
+       write_c0_compare(count + 1000);
+}
+#endif
+
+asmlinkage void plat_irq_dispatch(void)
+{
+       DO_AR5312(ar5312_irq_dispatch();)
+       DO_AR5315(ar5315_irq_dispatch();)
+}
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+void (*board_time_init)(void);
+void __init plat_time_init(void) {
+    board_time_init();
+}
+#endif
+
+void __init arch_init_irq(void)
+{
+       clear_c0_status(ST0_IM);
+       mips_cpu_irq_init();
+
+       /* Initialize interrupt controllers */
+       DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);)
+       DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);)
+}
+
+static int __init ar531x_register_gpiodev(void)
+{
+       static struct resource res = {
+               .start = 0xFFFFFFFF,
+       };
+       struct platform_device *pdev;
+
+       printk(KERN_INFO "ar531x: Registering GPIODEV device\n");
+
+       pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
+
+       if (!pdev) {
+               printk(KERN_ERR "ar531x: GPIODEV init failed\n");
+               return -ENODEV;
+       }
+
+       return 0;
+}
+
+device_initcall(ar531x_register_gpiodev);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c
new file mode 100644 (file)
index 0000000..82617cd
--- /dev/null
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for ar531x
+ */
+
+#include <linux/init.h>
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <ar531x.h>
+
+void __init prom_init(void)
+{
+       char **argv;
+
+       mips_machtype = -1;
+
+       DO_AR5312(ar5312_prom_init();)
+       DO_AR5315(ar5315_prom_init();)
+#if 0
+       argv = (char **)fw_arg1;
+       /* RedBoot desired command line is argv[1] */
+       strcat(arcs_cmdline, argv[1]);
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c
new file mode 100644 (file)
index 0000000..eb525da
--- /dev/null
@@ -0,0 +1,162 @@
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/kobject.h>
+#include <linux/workqueue.h>
+#include <linux/skbuff.h>
+#include <linux/netlink.h>
+#include <net/sock.h>
+#include <asm/uaccess.h>
+#include <ar531x.h>
+
+#define AR531X_RESET_GPIO_IRQ  (AR531X_GPIO_IRQ(bcfg->resetConfigGpio))
+
+struct event_t {
+       struct work_struct wq;
+       int set;
+       unsigned long jiffies;
+};
+
+static struct ar531x_boarddata *bcfg;
+static struct timer_list rst_button_timer;
+
+extern struct sock *uevent_sock;
+extern u64 uevent_next_seqnum(void);
+static unsigned long seen;
+
+static inline void add_msg(struct sk_buff *skb, char *msg)
+{
+       char *scratch;
+       scratch = skb_put(skb, strlen(msg) + 1);
+       sprintf(scratch, msg);
+}
+
+static void hotplug_button(struct work_struct *wq)
+{
+       struct sk_buff *skb;
+       struct event_t *event;
+       size_t len;
+       char *scratch, *s;
+       char buf[128];
+
+       event = container_of(wq, struct event_t, wq);
+       if (!uevent_sock)
+               goto done;
+
+       /* allocate message with the maximum possible size */
+       s = event->set ? "pressed" : "released";
+       len = strlen(s) + 2;
+       skb = alloc_skb(len + 2048, GFP_KERNEL);
+       if (!skb)
+               goto done;
+
+       /* add header */
+       scratch = skb_put(skb, len);
+       sprintf(scratch, "%s@",s);
+
+       /* copy keys to our continuous event payload buffer */
+       add_msg(skb, "HOME=/");
+       add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin");
+       add_msg(skb, "SUBSYSTEM=button");
+       add_msg(skb, "BUTTON=reset");
+       add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released"));
+       sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ);
+       add_msg(skb, buf);
+       snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
+       add_msg(skb, buf);
+
+       NETLINK_CB(skb).dst_group = 1;
+       netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
+
+done:
+       kfree(event);
+}
+
+static int no_release_workaround = 1;
+
+static void
+reset_button_poll(unsigned long unused)
+{
+       struct event_t *event;
+       int gpio = ~0;
+
+       if(!no_release_workaround)
+               return;
+
+       DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
+    gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE);
+       if(gpio)
+       {
+               rst_button_timer.expires = jiffies + (HZ / 4);
+               add_timer(&rst_button_timer);
+       } else {
+               event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
+               if (!event)
+               {
+                       printk("Could not alloc hotplug event\n");
+                       return;
+               }
+               event->set = 0;
+               event->jiffies = jiffies;
+               INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
+               schedule_work(&event->wq);
+       }
+}
+
+static irqreturn_t button_handler(int irq, void *dev_id)
+{
+       static int pressed = 0;
+       struct event_t *event;
+       u32 gpio = ~0;
+
+       event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC);
+       if (!event)
+               return IRQ_NONE;
+
+       pressed = !pressed;
+
+       DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);)
+       gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE);
+
+       event->set = gpio;
+       if(!event->set)
+               no_release_workaround = 0;
+
+       event->jiffies = jiffies;
+
+       INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
+       schedule_work(&event->wq);
+
+       seen = jiffies;
+       if(event->set && no_release_workaround)
+               mod_timer(&rst_button_timer, jiffies + (HZ / 4));
+
+       return IRQ_HANDLED;
+}
+
+void ar531x_disable_reset_button(void)
+{
+       disable_irq(AR531X_RESET_GPIO_IRQ);
+}
+
+EXPORT_SYMBOL(ar531x_disable_reset_button);
+
+int __init ar531x_init_reset(void)
+{
+       bcfg = (struct ar531x_boarddata *) board_config;
+
+       seen = jiffies;
+
+       init_timer(&rst_button_timer);
+       rst_button_timer.function = reset_button_poll;
+       rst_button_timer.expires = jiffies + HZ / 50;
+       add_timer(&rst_button_timer);
+
+       request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL);
+
+       return 0;
+}
+
+
+
+module_init(ar531x_init_reset);
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h
new file mode 100644 (file)
index 0000000..afa3aef
--- /dev/null
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5312_H
+#define AR5312_H
+
+#include <asm/addrspace.h>
+
+/*
+ * IRQs
+ */
+
+#define AR5312_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1_INTRS  MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/* Address Map */
+#define AR531X_WLAN0            0x18000000
+#define AR531X_WLAN1            0x18500000
+#define AR531X_ENET0            0x18100000
+#define AR531X_ENET1            0x18200000
+#define AR531X_SDRAMCTL         0x18300000
+#define AR531X_FLASHCTL         0x18400000
+#define AR531X_APBBASE         0x1c000000
+#define AR531X_FLASH            0x1e000000
+#define AR531X_UART0            0xbc000003      /* UART MMR */
+
+/*
+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that
+ * should be considered available.  The AR5312 supports 2 enet MACS,
+ * even though many reference boards only actually use 1 of them
+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
+ * The AR2312 supports 1 enet MAC.
+ */
+#define AR531X_NUM_ENET_MAC             2
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5212_AR5312_REV2      0x0052          /* AR5312 WMAC (AP31) */
+#define AR5212_AR5312_REV7      0x0057          /* AR5312 WMAC (AP30-040) */
+#define AR5212_AR2313_REV8      0x0058          /* AR2313 WMAC (AP43-030) */
+#define AR531X_RADIO_MASK_OFF  0xc8
+#define AR531X_RADIO0_MASK     0x0003
+#define AR531X_RADIO1_MASK     0x000c
+#define AR531X_RADIO1_S        2
+
+/*
+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\
+ * should be considered available.
+ */
+#define AR531X_NUM_WMAC                 2
+
+/* Reset/Timer Block Address Map */
+#define AR531X_RESETTMR                (AR531X_APBBASE  + 0x3000)
+#define AR531X_TIMER           (AR531X_RESETTMR + 0x0000) /* countdown timer */
+#define AR531X_WD_CTRL          (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */
+#define AR531X_WD_TIMER         (AR531X_RESETTMR + 0x000c) /* watchdog timer */
+#define AR531X_ISR             (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */
+#define AR531X_IMR             (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */
+#define AR531X_RESET           (AR531X_RESETTMR + 0x0020)
+#define AR5312_CLOCKCTL1       (AR531X_RESETTMR + 0x0064)
+#define AR5312_SCRATCH         (AR531X_RESETTMR + 0x006c)
+#define AR531X_PROCADDR                (AR531X_RESETTMR + 0x0070)
+#define AR531X_PROC1           (AR531X_RESETTMR + 0x0074)
+#define AR531X_DMAADDR         (AR531X_RESETTMR + 0x0078)
+#define AR531X_DMA1            (AR531X_RESETTMR + 0x007c)
+#define AR531X_ENABLE           (AR531X_RESETTMR + 0x0080) /* interface enb */
+#define AR531X_REV             (AR531X_RESETTMR + 0x0090) /* revision */
+
+/* AR531X_WD_CTRL register bit field definitions */
+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000
+#define AR531X_WD_CTRL_NMI               0x0001
+#define AR531X_WD_CTRL_RESET             0x0002
+
+/* AR531X_ISR register bit field definitions */
+#define AR531X_ISR_NONE                0x0000
+#define AR531X_ISR_TIMER       0x0001
+#define AR531X_ISR_AHBPROC     0x0002
+#define AR531X_ISR_AHBDMA      0x0004
+#define AR531X_ISR_GPIO                0x0008
+#define AR531X_ISR_UART0       0x0010
+#define AR531X_ISR_UART0DMA    0x0020
+#define AR531X_ISR_WD          0x0040
+#define AR531X_ISR_LOCAL       0x0080
+
+/* AR531X_RESET register bit field definitions */
+#define AR531X_RESET_SYSTEM     0x00000001  /* cold reset full system */
+#define AR531X_RESET_PROC       0x00000002  /* cold reset MIPS core */
+#define AR531X_RESET_WLAN0      0x00000004  /* cold reset WLAN MAC and BB */
+#define AR531X_RESET_EPHY0      0x00000008  /* cold reset ENET0 phy */
+#define AR531X_RESET_EPHY1      0x00000010  /* cold reset ENET1 phy */
+#define AR531X_RESET_ENET0      0x00000020  /* cold reset ENET0 mac */
+#define AR531X_RESET_ENET1      0x00000040  /* cold reset ENET1 mac */
+#define AR531X_RESET_UART0      0x00000100  /* cold reset UART0 (high speed) */
+#define AR531X_RESET_WLAN1      0x00000200  /* cold reset WLAN MAC/BB */
+#define AR531X_RESET_APB        0x00000400  /* cold reset APB (ar5312) */
+#define AR531X_RESET_WARM_PROC  0x00001000  /* warm reset MIPS core */
+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000  /* warm reset WLAN0 MAC */
+#define AR531X_RESET_WARM_WLAN0_BB  0x00004000  /* warm reset WLAN0 BaseBand */
+#define AR531X_RESET_NMI        0x00010000  /* send an NMI to the processor */
+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000  /* warm reset WLAN1 mac */
+#define AR531X_RESET_WARM_WLAN1_BB  0x00040000  /* warm reset WLAN1 baseband */
+#define AR531X_RESET_LOCAL_BUS  0x00080000  /* reset local bus */
+#define AR531X_RESET_WDOG       0x00100000  /* last reset was a watchdog */
+
+#define AR531X_RESET_WMAC0_BITS \
+        AR531X_RESET_WLAN0 |\
+        AR531X_RESET_WARM_WLAN0_MAC |\
+        AR531X_RESET_WARM_WLAN0_BB
+
+#define AR531X_RESERT_WMAC1_BITS \
+        AR531X_RESET_WLAN1 |\
+        AR531X_RESET_WARM_WLAN1_MAC |\
+        AR531X_RESET_WARM_WLAN1_BB
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK    0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT            4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK   0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT           8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK      0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK    0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT           12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK   0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT          16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK      0x00000000
+
+
+/* AR531X_ENABLE register bit field definitions */
+#define AR531X_ENABLE_WLAN0              0x0001
+#define AR531X_ENABLE_ENET0              0x0002
+#define AR531X_ENABLE_ENET1              0x0004
+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008   /* UART, and WLAN1 PIOs */
+#define AR531X_ENABLE_WLAN1_DMA          0x0010   /* WLAN1 DMAs */
+#define AR531X_ENABLE_WLAN1 \
+            (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA)
+
+/* AR531X_REV register bit field definitions */
+#define AR531X_REV_WMAC_MAJ    0xf000
+#define AR531X_REV_WMAC_MAJ_S  12
+#define AR531X_REV_WMAC_MIN    0x0f00
+#define AR531X_REV_WMAC_MIN_S  8
+#define AR531X_REV_MAJ         0x00f0
+#define AR531X_REV_MAJ_S       4
+#define AR531X_REV_MIN         0x000f
+#define AR531X_REV_MIN_S       0
+#define AR531X_REV_CHIP        (AR531X_REV_MAJ|AR531X_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR531X_REV_MAJ_AR5312          0x4
+#define AR531X_REV_MAJ_AR2313          0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL     0x0     /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE   0x1     /* Single WLAN version */
+
+/* AR531X_FLASHCTL register bit field definitions */
+#define FLASHCTL_IDCY   0x0000000f      /* Idle cycle turn around time */
+#define FLASHCTL_IDCY_S 0
+#define FLASHCTL_WST1   0x000003e0      /* Wait state 1 */
+#define FLASHCTL_WST1_S 5
+#define FLASHCTL_RBLE   0x00000400      /* Read byte lane enable */
+#define FLASHCTL_WST2   0x0000f800      /* Wait state 2 */
+#define FLASHCTL_WST2_S 11
+#define FLASHCTL_AC     0x00070000      /* Flash address check (added) */
+#define FLASHCTL_AC_S   16
+#define FLASHCTL_AC_128K 0x00000000
+#define FLASHCTL_AC_256K 0x00010000
+#define FLASHCTL_AC_512K 0x00020000
+#define FLASHCTL_AC_1M   0x00030000
+#define FLASHCTL_AC_2M   0x00040000
+#define FLASHCTL_AC_4M   0x00050000
+#define FLASHCTL_AC_8M   0x00060000
+#define FLASHCTL_AC_RES  0x00070000     /* 16MB is not supported */
+#define FLASHCTL_E      0x00080000      /* Flash bank enable (added) */
+#define FLASHCTL_BUSERR 0x01000000      /* Bus transfer error status flag */
+#define FLASHCTL_WPERR  0x02000000      /* Write protect error status flag */
+#define FLASHCTL_WP     0x04000000      /* Write protect */
+#define FLASHCTL_BM     0x08000000      /* Burst mode */
+#define FLASHCTL_MW     0x30000000      /* Memory width */
+#define FLASHCTL_MWx8   0x00000000      /* Memory width x8 */
+#define FLASHCTL_MWx16  0x10000000      /* Memory width x16 */
+#define FLASHCTL_MWx32  0x20000000      /* Memory width x32 (not supported) */
+#define FLASHCTL_ATNR   0x00000000      /* Access type == no retry */
+#define FLASHCTL_ATR    0x80000000      /* Access type == retry every */
+#define FLASHCTL_ATR4   0xc0000000      /* Access type == retry every 4 */
+
+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices.  */
+#define AR531X_FLASHCTL0        (AR531X_FLASHCTL + 0x00)
+#define AR531X_FLASHCTL1        (AR531X_FLASHCTL + 0x04)
+#define AR531X_FLASHCTL2        (AR531X_FLASHCTL + 0x08)
+
+/* ARM SDRAM Controller -- just enough to determine memory size */
+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04)
+#define MEM_CFG1_AC0    0x00000700      /* bank 0: SDRAM addr check (added) */
+#define MEM_CFG1_AC0_S  8
+#define MEM_CFG1_AC1    0x00007000      /* bank 1: SDRAM addr check (added) */
+#define MEM_CFG1_AC1_S  12
+
+/* GPIO Address Map */
+#define AR531X_GPIO         (AR531X_APBBASE  + 0x2000)
+#define AR531X_GPIO_DO      (AR531X_GPIO + 0x00)        /* output register */
+#define AR531X_GPIO_DI      (AR531X_GPIO + 0x04)        /* intput register */
+#define AR531X_GPIO_CR      (AR531X_GPIO + 0x08)        /* control register */
+
+/* GPIO Control Register bit field definitions */
+#define AR531X_GPIO_CR_M(x)    (1 << (x))                      /* mask for i/o */
+#define AR531X_GPIO_CR_O(x)    (0 << (x))                      /* mask for output */
+#define AR531X_GPIO_CR_I(x)    (1 << (x))                      /* mask for input */
+#define AR531X_GPIO_CR_INT(x)  (1 << ((x)+8))                  /* mask for interrupt */
+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16))                 /* uart multiplex */
+
+#endif
+
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h
new file mode 100644 (file)
index 0000000..8ad8810
--- /dev/null
@@ -0,0 +1,694 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef AR5315_H
+#define AR5315_H
+
+/*
+ * IRQs
+ */
+#define AR5315_IRQ_MISC_INTRS   MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */
+#define AR5315_IRQ_WLAN0_INTRS  MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */
+#define AR5315_IRQ_ENET0_INTRS  MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */
+#define AR5315_IRQ_LCBUS_PCI    MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */
+#define AR5315_IRQ_WLAN0_POLL   MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */
+
+
+/*
+ * Address map
+ */
+#define AR5315_SDRAM0           0x00000000      /* DRAM */
+#define AR5315_SPI_READ         0x08000000      /* SPI FLASH */
+#define AR5315_WLAN0            0xB0000000      /* Wireless MMR */
+#define AR5315_PCI              0xB0100000      /* PCI MMR */
+#define AR5315_SDRAMCTL         0xB0300000      /* SDRAM MMR */
+#define AR5315_LOCAL            0xB0400000      /* LOCAL BUS MMR */
+#define AR5315_ENET0            0xB0500000      /* ETHERNET MMR */
+#define AR5315_DSLBASE          0xB1000000      /* RESET CONTROL MMR */
+#define AR5315_UART0            0xB1100003      /* UART MMR */
+#define AR5315_SPI              0xB1300000      /* SPI FLASH MMR */
+#define AR5315_FLASHBT          0xBfc00000      /* ro boot alias to FLASH */
+#define AR5315_RAM1             0x40000000      /* ram alias */
+#define AR5315_PCIEXT           0x80000000      /* pci external */
+#define AR5315_RAM2             0xc0000000      /* ram alias */
+#define AR5315_RAM3             0xe0000000      /* ram alias */
+
+/*
+ * Reset Register
+ */
+#define AR5315_COLD_RESET       (AR5315_DSLBASE + 0x0000)
+
+/* Cold Reset */
+#define RESET_COLD_AHB              0x00000001
+#define RESET_COLD_APB              0x00000002
+#define RESET_COLD_CPU              0x00000004
+#define RESET_COLD_CPUWARM          0x00000008
+#define RESET_SYSTEM                (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB)      /* full system */
+
+#define AR5317_RESET_SYSTEM        0x00000010
+
+/* Warm Reset */
+
+#define AR5315_RESET            (AR5315_DSLBASE + 0x0004)
+
+#define AR5315_RESET_WARM_WLAN0_MAC        0x00000001      /* warm reset WLAN0 MAC */
+#define AR5315_RESET_WARM_WLAN0_BB         0x00000002      /* warm reset WLAN0 BaseBand */
+#define AR5315_RESET_MPEGTS_RSVD           0x00000004      /* warm reset MPEG-TS */
+#define AR5315_RESET_PCIDMA                0x00000008      /* warm reset PCI ahb/dma */
+#define AR5315_RESET_MEMCTL                0x00000010      /* warm reset memory controller */
+#define AR5315_RESET_LOCAL                 0x00000020      /* warm reset local bus */
+#define AR5315_RESET_I2C_RSVD              0x00000040      /* warm reset I2C bus */
+#define AR5315_RESET_SPI                   0x00000080      /* warm reset SPI interface */
+#define AR5315_RESET_UART0                 0x00000100      /* warm reset UART0 */
+#define AR5315_RESET_IR_RSVD               0x00000200      /* warm reset IR interface */
+#define AR5315_RESET_EPHY0                 0x00000400      /* cold reset ENET0 phy */
+#define AR5315_RESET_ENET0                 0x00000800      /* cold reset ENET0 mac */
+
+/*
+ * AHB master arbitration control
+ */
+#define AR5315_AHB_ARB_CTL      (AR5315_DSLBASE + 0x0008)
+
+#define ARB_CPU                     0x00000001      /* CPU, default */
+#define ARB_WLAN                    0x00000002      /* WLAN */
+#define ARB_MPEGTS_RSVD             0x00000004      /* MPEG-TS */
+#define ARB_LOCAL                   0x00000008      /* LOCAL */
+#define ARB_PCI                     0x00000010      /* PCI */
+#define ARB_ETHERNET                0x00000020      /* Ethernet */
+#define ARB_RETRY                   0x00000100      /* retry policy, debug only */
+
+/*
+ * Config Register
+ */
+#define AR5315_ENDIAN_CTL       (AR5315_DSLBASE + 0x000c)
+
+#define AR5315_CONFIG_AHB                  0x00000001      /* EC - AHB bridge endianess */
+#define AR5315_CONFIG_WLAN                 0x00000002      /* WLAN byteswap */
+#define AR5315_CONFIG_MPEGTS_RSVD          0x00000004      /* MPEG-TS byteswap */
+#define AR5315_CONFIG_PCI                  0x00000008      /* PCI byteswap */
+#define AR5315_CONFIG_MEMCTL               0x00000010      /* Memory controller endianess */
+#define AR5315_CONFIG_LOCAL                0x00000020      /* Local bus byteswap */
+#define AR5315_CONFIG_ETHERNET             0x00000040      /* Ethernet byteswap */
+
+#define AR5315_CONFIG_MERGE                0x00000200      /* CPU write buffer merge */
+#define AR5315_CONFIG_CPU                  0x00000400      /* CPU big endian */
+#define AR5315_CONFIG_PCIAHB               0x00000800
+#define AR5315_CONFIG_PCIAHB_BRIDGE        0x00001000
+#define AR5315_CONFIG_SPI                  0x00008000      /* SPI byteswap */
+#define AR5315_CONFIG_CPU_DRAM             0x00010000
+#define AR5315_CONFIG_CPU_PCI              0x00020000
+#define AR5315_CONFIG_CPU_MMR              0x00040000
+#define AR5315_CONFIG_BIG                  0x00000400
+
+
+/*
+ * NMI control
+ */
+#define AR5315_NMI_CTL          (AR5315_DSLBASE + 0x0010)
+
+#define NMI_EN  1
+
+/*
+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0).
+ */
+#define AR5315_SREV             (AR5315_DSLBASE + 0x0014)
+
+#define AR5315_REV_MAJ                     0x00f0
+#define AR5315_REV_MAJ_S                   4
+#define AR5315_REV_MIN                     0x000f
+#define AR5315_REV_MIN_S                   0
+#define AR5315_REV_CHIP                    (AR5315_REV_MAJ|AR5315_REV_MIN)
+
+/*
+ * Interface Enable
+ */
+#define AR5315_IF_CTL           (AR5315_DSLBASE + 0x0018)
+
+#define IF_MASK                     0x00000007
+#define IF_DISABLED                 0
+#define IF_PCI                      1
+#define IF_TS_LOCAL                 2
+#define IF_ALL                      3   /* only for emulation with separate pins */
+#define IF_LOCAL_HOST               0x00000008
+#define IF_PCI_HOST                 0x00000010
+#define IF_PCI_INTR                 0x00000020
+#define IF_PCI_CLK_MASK             0x00030000
+#define IF_PCI_CLK_INPUT            0
+#define IF_PCI_CLK_OUTPUT_LOW       1
+#define IF_PCI_CLK_OUTPUT_CLK       2
+#define IF_PCI_CLK_OUTPUT_HIGH      3
+#define IF_PCI_CLK_SHIFT            16
+
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define REV_MAJ_AR5311              0x01
+#define REV_MAJ_AR5312              0x04
+#define REV_MAJ_AR5315              0x0B
+
+/*
+ * APB Interrupt control
+ */
+
+#define AR5315_ISR              (AR5315_DSLBASE + 0x0020)
+#define AR5315_IMR              (AR5315_DSLBASE + 0x0024)
+#define AR5315_GISR             (AR5315_DSLBASE + 0x0028)
+
+#define AR5315_ISR_UART0                   0x0001           /* high speed UART */
+#define AR5315_ISR_I2C_RSVD                0x0002           /* I2C bus */
+#define AR5315_ISR_SPI                     0x0004           /* SPI bus */
+#define AR5315_ISR_AHB                     0x0008           /* AHB error */
+#define AR5315_ISR_APB                     0x0010           /* APB error */
+#define AR5315_ISR_TIMER                   0x0020           /* timer */
+#define AR5315_ISR_GPIO                    0x0040           /* GPIO */
+#define AR5315_ISR_WD                      0x0080           /* watchdog */
+#define AR5315_ISR_IR_RSVD                 0x0100           /* IR */
+
+#define AR5315_GISR_MISC                   0x0001
+#define AR5315_GISR_WLAN0                  0x0002
+#define AR5315_GISR_MPEGTS_RSVD            0x0004
+#define AR5315_GISR_LOCALPCI               0x0008
+#define AR5315_GISR_WMACPOLL               0x0010
+#define AR5315_GISR_TIMER                  0x0020
+#define AR5315_GISR_ETHERNET               0x0040
+
+/*
+ * Interrupt routing from IO to the processor IP bits
+ * Define our inter mask and level
+ */
+#define AR5315_INTR_MISCIO      SR_IBIT3
+#define AR5315_INTR_WLAN0       SR_IBIT4
+#define AR5315_INTR_ENET0       SR_IBIT5
+#define AR5315_INTR_LOCALPCI    SR_IBIT6
+#define AR5315_INTR_WMACPOLL    SR_IBIT7
+#define AR5315_INTR_COMPARE     SR_IBIT8
+
+/*
+ * Timers
+ */
+#define AR5315_TIMER            (AR5315_DSLBASE + 0x0030)
+#define AR5315_RELOAD           (AR5315_DSLBASE + 0x0034)
+#define AR5315_WD               (AR5315_DSLBASE + 0x0038)
+#define AR5315_WDC              (AR5315_DSLBASE + 0x003c)
+
+#define WDC_RESET                   0x00000002               /* reset on watchdog */
+#define WDC_NMI                     0x00000001               /* NMI on watchdog */
+#define WDC_IGNORE_EXPIRATION       0x00000000
+
+/*
+ * CPU Performance Counters
+ */
+#define AR5315_PERFCNT0         (AR5315_DSLBASE + 0x0048)
+#define AR5315_PERFCNT1         (AR5315_DSLBASE + 0x004c)
+
+#define PERF_DATAHIT                0x0001  /* Count Data Cache Hits */
+#define PERF_DATAMISS               0x0002  /* Count Data Cache Misses */
+#define PERF_INSTHIT                0x0004  /* Count Instruction Cache Hits */
+#define PERF_INSTMISS               0x0008  /* Count Instruction Cache Misses */
+#define PERF_ACTIVE                 0x0010  /* Count Active Processor Cycles */
+#define PERF_WBHIT                  0x0020  /* Count CPU Write Buffer Hits */
+#define PERF_WBMISS                 0x0040  /* Count CPU Write Buffer Misses */
+
+#define PERF_EB_ARDY                0x0001  /* Count EB_ARdy signal */
+#define PERF_EB_AVALID              0x0002  /* Count EB_AValid signal */
+#define PERF_EB_WDRDY               0x0004  /* Count EB_WDRdy signal */
+#define PERF_EB_RDVAL               0x0008  /* Count EB_RdVal signal */
+#define PERF_VRADDR                 0x0010  /* Count valid read address cycles */
+#define PERF_VWADDR                 0x0020  /* Count valid write address cycles */
+#define PERF_VWDATA                 0x0040  /* Count valid write data cycles */
+
+/*
+ * AHB Error Reporting.
+ */
+#define AR5315_AHB_ERR0         (AR5315_DSLBASE + 0x0050)  /* error  */
+#define AR5315_AHB_ERR1         (AR5315_DSLBASE + 0x0054)  /* haddr  */
+#define AR5315_AHB_ERR2         (AR5315_DSLBASE + 0x0058)  /* hwdata */
+#define AR5315_AHB_ERR3         (AR5315_DSLBASE + 0x005c)  /* hrdata */
+#define AR5315_AHB_ERR4         (AR5315_DSLBASE + 0x0060)  /* status */
+
+#define AHB_ERROR_DET               1   /* AHB Error has been detected,          */
+                                        /* write 1 to clear all bits in ERR0     */
+#define AHB_ERROR_OVR               2   /* AHB Error overflow has been detected  */
+#define AHB_ERROR_WDT               4   /* AHB Error due to wdt instead of hresp */
+
+#define PROCERR_HMAST               0x0000000f
+#define PROCERR_HMAST_DFLT          0
+#define PROCERR_HMAST_WMAC          1
+#define PROCERR_HMAST_ENET          2
+#define PROCERR_HMAST_PCIENDPT      3
+#define PROCERR_HMAST_LOCAL         4
+#define PROCERR_HMAST_CPU           5
+#define PROCERR_HMAST_PCITGT        6
+
+#define PROCERR_HMAST_S             0
+#define PROCERR_HWRITE              0x00000010
+#define PROCERR_HSIZE               0x00000060
+#define PROCERR_HSIZE_S             5
+#define PROCERR_HTRANS              0x00000180
+#define PROCERR_HTRANS_S            7
+#define PROCERR_HBURST              0x00000e00
+#define PROCERR_HBURST_S            9
+
+
+
+/*
+ * Clock Control
+ */
+#define AR5315_PLLC_CTL         (AR5315_DSLBASE + 0x0064)
+#define AR5315_PLLV_CTL         (AR5315_DSLBASE + 0x0068)
+#define AR5315_CPUCLK           (AR5315_DSLBASE + 0x006c)
+#define AR5315_AMBACLK          (AR5315_DSLBASE + 0x0070)
+#define AR5315_SYNCCLK          (AR5315_DSLBASE + 0x0074)
+#define AR5315_DSL_SLEEP_CTL    (AR5315_DSLBASE + 0x0080)
+#define AR5315_DSL_SLEEP_DUR    (AR5315_DSLBASE + 0x0084)
+
+/* PLLc Control fields */
+#define PLLC_REF_DIV_M              0x00000003
+#define PLLC_REF_DIV_S              0
+#define PLLC_FDBACK_DIV_M           0x0000007C
+#define PLLC_FDBACK_DIV_S           2
+#define PLLC_ADD_FDBACK_DIV_M       0x00000080
+#define PLLC_ADD_FDBACK_DIV_S       7
+#define PLLC_CLKC_DIV_M             0x0001c000
+#define PLLC_CLKC_DIV_S             14
+#define PLLC_CLKM_DIV_M             0x00700000
+#define PLLC_CLKM_DIV_S             20
+
+/* CPU CLK Control fields */
+#define CPUCLK_CLK_SEL_M            0x00000003
+#define CPUCLK_CLK_SEL_S            0
+#define CPUCLK_CLK_DIV_M            0x0000000c
+#define CPUCLK_CLK_DIV_S            2
+
+/* AMBA CLK Control fields */
+#define AMBACLK_CLK_SEL_M           0x00000003
+#define AMBACLK_CLK_SEL_S           0
+#define AMBACLK_CLK_DIV_M           0x0000000c
+#define AMBACLK_CLK_DIV_S           2
+
+#if defined(COBRA_EMUL)
+#define AR5315_AMBA_CLOCK_RATE  20000000
+#define AR5315_CPU_CLOCK_RATE   40000000
+#else
+#if defined(DEFAULT_PLL)
+#define AR5315_AMBA_CLOCK_RATE  40000000
+#define AR5315_CPU_CLOCK_RATE   40000000
+#else
+#define AR5315_AMBA_CLOCK_RATE  92000000
+#define AR5315_CPU_CLOCK_RATE   184000000
+#endif /* ! DEFAULT_PLL */
+#endif /* ! COBRA_EMUL */
+
+#define AR5315_UART_CLOCK_RATE  AR5315_AMBA_CLOCK_RATE
+#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE
+
+/*
+ * The UART computes baud rate as:
+ *   baud = clock / (16 * divisor)
+ * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL).
+ */
+#define DESIRED_BAUD_RATE           38400
+
+
+#define CLOCKCTL_UART0  0x0010  /* enable UART0 external clock */
+
+
+ /*
+ * Applicable "PCICFG" bits for WLAN(s).  Assoc status and LED mode.
+ */
+#define ASSOC_STATUS_M              0x00000003
+#define ASSOC_STATUS_NONE           0
+#define ASSOC_STATUS_PENDING        1
+#define ASSOC_STATUS_ASSOCIATED     2
+#define LED_MODE_M                  0x0000001c
+#define LED_BLINK_THRESHOLD_M       0x000000e0
+#define LED_SLOW_BLINK_MODE         0x00000100
+
+/*
+ * GPIO
+ */
+
+#define AR5315_GPIO_DI          (AR5315_DSLBASE + 0x0088)
+#define AR5315_GPIO_DO          (AR5315_DSLBASE + 0x0090)
+#define AR5315_GPIO_CR          (AR5315_DSLBASE + 0x0098)
+#define AR5315_GPIO_INT         (AR5315_DSLBASE + 0x00a0)
+
+#define AR5315_GPIO_CR_M(x)                (1 << (x))                  /* mask for i/o */
+#define AR5315_GPIO_CR_O(x)                (1 << (x))                  /* output */
+#define AR5315_GPIO_CR_I(x)                (0)                         /* input */
+
+#define AR5315_GPIO_INT_S(x)               (x)                         /* interrupt enable */
+#define AR5315_GPIO_INT_M                  (0x3F)                      /* mask for int */
+#define AR5315_GPIO_INT_LVL(x)             ((x) << 6)                  /* interrupt level */
+#define AR5315_GPIO_INT_LVL_M              ((0x3) << 6)                /* mask for int level */
+
+#define AR5315_GPIO_INT_MAX_Y                          1   /* Maximum value of Y for AR5313_GPIO_INT_* macros */
+#define AR5315_GPIO_INT_LVL_OFF                                0   /* Triggerring off */
+#define AR5315_GPIO_INT_LVL_LOW                                1   /* Low Level Triggered */
+#define AR5315_GPIO_INT_LVL_HIGH                       2   /* High Level Triggered */
+#define AR5315_GPIO_INT_LVL_EDGE                       3   /* Edge Triggered */
+
+#define AR5315_RESET_GPIO       5
+#define AR5315_NUM_GPIO         22
+
+
+/*
+ *  PCI Clock Control
+ */
+
+#define AR5315_PCICLK           (AR5315_DSLBASE + 0x00a4)
+
+#define AR5315_PCICLK_INPUT_M              0x3
+#define AR5315_PCICLK_INPUT_S              0
+
+#define AR5315_PCICLK_PLLC_CLKM            0
+#define AR5315_PCICLK_PLLC_CLKM1           1
+#define AR5315_PCICLK_PLLC_CLKC            2
+#define AR5315_PCICLK_REF_CLK              3
+
+#define AR5315_PCICLK_DIV_M                0xc
+#define AR5315_PCICLK_DIV_S                2
+
+#define AR5315_PCICLK_IN_FREQ              0
+#define AR5315_PCICLK_IN_FREQ_DIV_6        1
+#define AR5315_PCICLK_IN_FREQ_DIV_8        2
+#define AR5315_PCICLK_IN_FREQ_DIV_10       3
+
+/*
+ * Observation Control Register
+ */
+#define AR5315_OCR              (AR5315_DSLBASE + 0x00b0)
+#define OCR_GPIO0_IRIN              0x0040
+#define OCR_GPIO1_IROUT             0x0080
+#define OCR_GPIO3_RXCLR             0x0200
+
+/*
+ *  General Clock Control
+ */
+
+#define AR5315_MISCCLK          (AR5315_DSLBASE + 0x00b4)
+#define MISCCLK_PLLBYPASS_EN        0x00000001
+#define MISCCLK_PROCREFCLK          0x00000002
+
+/*
+ * SDRAM Controller
+ *   - No read or write buffers are included.
+ */
+#define AR5315_MEM_CFG          (AR5315_SDRAMCTL + 0x00)
+#define AR5315_MEM_CTRL         (AR5315_SDRAMCTL + 0x0c)
+#define AR5315_MEM_REF          (AR5315_SDRAMCTL + 0x10)
+
+#define SDRAM_DATA_WIDTH_M          0x00006000
+#define SDRAM_DATA_WIDTH_S          13
+
+#define SDRAM_COL_WIDTH_M           0x00001E00
+#define SDRAM_COL_WIDTH_S           9
+
+#define SDRAM_ROW_WIDTH_M           0x000001E0
+#define SDRAM_ROW_WIDTH_S           5
+
+#define SDRAM_BANKADDR_BITS_M       0x00000018
+#define SDRAM_BANKADDR_BITS_S       3
+
+/*
+ * SPI Flash Interface Registers
+ */
+
+#define AR5315_SPI_CTL      (AR5315_SPI + 0x00)
+#define AR5315_SPI_OPCODE   (AR5315_SPI + 0x04)
+#define AR5315_SPI_DATA     (AR5315_SPI + 0x08)
+
+#define SPI_CTL_START           0x00000100
+#define SPI_CTL_BUSY            0x00010000
+#define SPI_CTL_TXCNT_MASK      0x0000000f
+#define SPI_CTL_RXCNT_MASK      0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
+#define SPI_CTL_SIZE_MASK       0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK    0x03000000
+#define SPI_OPCODE_MASK         0x000000ff
+
+/*
+ * PCI-MAC Configuration registers
+ */
+#define PCI_MAC_RC              (AR5315_PCI + 0x4000)
+#define PCI_MAC_SCR             (AR5315_PCI + 0x4004)
+#define PCI_MAC_INTPEND         (AR5315_PCI + 0x4008)
+#define PCI_MAC_SFR             (AR5315_PCI + 0x400C)
+#define PCI_MAC_PCICFG          (AR5315_PCI + 0x4010)
+#define PCI_MAC_SREV            (AR5315_PCI + 0x4020)
+
+#define PCI_MAC_RC_MAC          0x00000001
+#define PCI_MAC_RC_BB           0x00000002
+
+#define PCI_MAC_SCR_SLMODE_M    0x00030000
+#define PCI_MAC_SCR_SLMODE_S    16
+#define PCI_MAC_SCR_SLM_FWAKE   0
+#define PCI_MAC_SCR_SLM_FSLEEP  1
+#define PCI_MAC_SCR_SLM_NORMAL  2
+
+#define PCI_MAC_SFR_SLEEP       0x00000001
+
+#define PCI_MAC_PCICFG_SPWR_DN  0x00010000
+
+
+/*
+ * PCI Bus Interface Registers
+ */
+#define AR5315_PCI_1MS_REG      (AR5315_PCI + 0x0008)
+#define AR5315_PCI_1MS_MASK     0x3FFFF         /* # of AHB clk cycles in 1ms */
+
+#define AR5315_PCI_MISC_CONFIG  (AR5315_PCI + 0x000c)
+#define AR5315_PCIMISC_TXD_EN   0x00000001      /* Enable TXD for fragments */
+#define AR5315_PCIMISC_CFG_SEL  0x00000002      /* mem or config cycles */
+#define AR5315_PCIMISC_GIG_MASK 0x0000000C      /* bits 31-30 for pci req */
+#define AR5315_PCIMISC_RST_MODE 0x00000030
+#define AR5315_PCIRST_INPUT     0x00000000      /* 4:5=0 rst is input */
+#define AR5315_PCIRST_LOW       0x00000010      /* 4:5=1 rst to GND */
+#define AR5315_PCIRST_HIGH      0x00000020      /* 4:5=2 rst to VDD */
+#define AR5315_PCIGRANT_EN      0x00000000      /* 6:7=0 early grant en */
+#define AR5315_PCIGRANT_FRAME   0x00000040      /* 6:7=1 grant waits 4 frame */
+#define AR5315_PCIGRANT_IDLE    0x00000080      /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCIGRANT_GAP     0x00000000      /* 6:7=2 grant waits 4 idle */
+#define AR5315_PCICACHE_DIS     0x00001000      /* PCI external access cache disable */
+
+#define AR5315_PCI_OUT_TSTAMP   (AR5315_PCI + 0x0010)
+
+#define AR5315_PCI_UNCACHE_CFG  (AR5315_PCI + 0x0014)
+
+#define AR5315_PCI_IN_EN        (AR5315_PCI + 0x0100)
+#define AR5315_PCI_IN_EN0       0x01            /* Enable chain 0 */
+#define AR5315_PCI_IN_EN1       0x02            /* Enable chain 1 */
+#define AR5315_PCI_IN_EN2       0x04            /* Enable chain 2 */
+#define AR5315_PCI_IN_EN3       0x08            /* Enable chain 3 */
+
+#define AR5315_PCI_IN_DIS       (AR5315_PCI + 0x0104)
+#define AR5315_PCI_IN_DIS0      0x01            /* Disable chain 0 */
+#define AR5315_PCI_IN_DIS1      0x02            /* Disable chain 1 */
+#define AR5315_PCI_IN_DIS2      0x04            /* Disable chain 2 */
+#define AR5315_PCI_IN_DIS3      0x08            /* Disable chain 3 */
+
+#define AR5315_PCI_IN_PTR       (AR5315_PCI + 0x0200)
+
+#define AR5315_PCI_OUT_EN       (AR5315_PCI + 0x0400)
+#define AR5315_PCI_OUT_EN0      0x01            /* Enable chain 0 */
+
+#define AR5315_PCI_OUT_DIS      (AR5315_PCI + 0x0404)
+#define AR5315_PCI_OUT_DIS0     0x01            /* Disable chain 0 */
+
+#define AR5315_PCI_OUT_PTR      (AR5315_PCI + 0x0408)
+
+#define AR5315_PCI_INT_STATUS   (AR5315_PCI + 0x0500)   /* write one to clr */
+#define AR5315_PCI_TXINT        0x00000001      /* Desc In Completed */
+#define AR5315_PCI_TXOK         0x00000002      /* Desc In OK */
+#define AR5315_PCI_TXERR        0x00000004      /* Desc In ERR */
+#define AR5315_PCI_TXEOL        0x00000008      /* Desc In End-of-List */
+#define AR5315_PCI_RXINT        0x00000010      /* Desc Out Completed */
+#define AR5315_PCI_RXOK         0x00000020      /* Desc Out OK */
+#define AR5315_PCI_RXERR        0x00000040      /* Desc Out ERR */
+#define AR5315_PCI_RXEOL        0x00000080      /* Desc Out EOL */
+#define AR5315_PCI_TXOOD        0x00000200      /* Desc In Out-of-Desc */
+#define AR5315_PCI_MASK         0x0000FFFF      /* Desc Mask */
+#define AR5315_PCI_EXT_INT      0x02000000
+#define AR5315_PCI_ABORT_INT    0x04000000
+
+#define AR5315_PCI_INT_MASK     (AR5315_PCI + 0x0504)   /* same as INT_STATUS */
+
+#define AR5315_PCI_INTEN_REG    (AR5315_PCI + 0x0508)
+#define AR5315_PCI_INT_DISABLE  0x00            /* disable pci interrupts */
+#define AR5315_PCI_INT_ENABLE   0x01            /* enable pci interrupts */
+
+#define AR5315_PCI_HOST_IN_EN   (AR5315_PCI + 0x0800)
+#define AR5315_PCI_HOST_IN_DIS  (AR5315_PCI + 0x0804)
+#define AR5315_PCI_HOST_IN_PTR  (AR5315_PCI + 0x0810)
+#define AR5315_PCI_HOST_OUT_EN  (AR5315_PCI + 0x0900)
+#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904)
+#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908)
+
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR5315_LB_CONFIG        (AR5315_LOCAL + 0x0000)
+#define AR5315_LBCONF_OE        0x00000001      /* =1 OE is low-true */
+#define AR5315_LBCONF_CS0       0x00000002      /* =1 first CS is low-true */
+#define AR5315_LBCONF_CS1       0x00000004      /* =1 2nd CS is low-true */
+#define AR5315_LBCONF_RDY       0x00000008      /* =1 RDY is low-true */
+#define AR5315_LBCONF_WE        0x00000010      /* =1 Write En is low-true */
+#define AR5315_LBCONF_WAIT      0x00000020      /* =1 WAIT is low-true */
+#define AR5315_LBCONF_ADS       0x00000040      /* =1 Adr Strobe is low-true */
+#define AR5315_LBCONF_MOT       0x00000080      /* =0 Intel, =1 Motorola */
+#define AR5315_LBCONF_8CS       0x00000100      /* =1 8 bits CS, 0= 16bits */
+#define AR5315_LBCONF_8DS       0x00000200      /* =1 8 bits Data S, 0=16bits */
+#define AR5315_LBCONF_ADS_EN    0x00000400      /* =1 Enable ADS */
+#define AR5315_LBCONF_ADR_OE    0x00000800      /* =1 Adr cap on OE, WE or DS */
+#define AR5315_LBCONF_ADDT_MUX  0x00001000      /* =1 Adr and Data share bus */
+#define AR5315_LBCONF_DATA_OE   0x00002000      /* =1 Data cap on OE, WE, DS */
+#define AR5315_LBCONF_16DATA    0x00004000      /* =1 Data is 16 bits wide */
+#define AR5315_LBCONF_SWAPDT    0x00008000      /* =1 Byte swap data */
+#define AR5315_LBCONF_SYNC      0x00010000      /* =1 Bus synchronous to clk */
+#define AR5315_LBCONF_INT       0x00020000      /* =1 Intr is low true */
+#define AR5315_LBCONF_INT_CTR0  0x00000000      /* GND high-Z, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR1  0x00040000      /* GND drive, Vdd is high-Z */
+#define AR5315_LBCONF_INT_CTR2  0x00080000      /* GND high-Z, Vdd drive */
+#define AR5315_LBCONF_INT_CTR3  0x000C0000      /* GND drive, Vdd drive */
+#define AR5315_LBCONF_RDY_WAIT  0x00100000      /* =1 RDY is negative of WAIT */
+#define AR5315_LBCONF_INT_PULSE 0x00200000      /* =1 Interrupt is a pulse */
+#define AR5315_LBCONF_ENABLE    0x00400000      /* =1 Falcon respond to LB */
+
+#define AR5315_LB_CLKSEL        (AR5315_LOCAL + 0x0004)
+#define AR5315_LBCLK_EXT        0x0001          /* use external clk for lb */
+
+#define AR5315_LB_1MS           (AR5315_LOCAL + 0x0008)
+#define AR5315_LB1MS_MASK       0x3FFFF         /* # of AHB clk cycles in 1ms */
+
+#define AR5315_LB_MISCCFG       (AR5315_LOCAL + 0x000C)
+#define AR5315_LBM_TXD_EN       0x00000001      /* Enable TXD for fragments */
+#define AR5315_LBM_RX_INTEN     0x00000002      /* Enable LB ints on RX ready */
+#define AR5315_LBM_MBOXWR_INTEN 0x00000004      /* Enable LB ints on mbox wr */
+#define AR5315_LBM_MBOXRD_INTEN 0x00000008      /* Enable LB ints on mbox rd */
+#define AR5315_LMB_DESCSWAP_EN  0x00000010      /* Byte swap desc enable */
+#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80
+#define AR5315_LBM_TIMEOUT_SHFT 7
+#define AR5315_LBM_PORTMUX      0x07000000
+
+
+#define AR5315_LB_RXTSOFF       (AR5315_LOCAL + 0x0010)
+
+#define AR5315_LB_TX_CHAIN_EN   (AR5315_LOCAL + 0x0100)
+#define AR5315_LB_TXEN_0        0x01
+#define AR5315_LB_TXEN_1        0x02
+#define AR5315_LB_TXEN_2        0x04
+#define AR5315_LB_TXEN_3        0x08
+
+#define AR5315_LB_TX_CHAIN_DIS  (AR5315_LOCAL + 0x0104)
+#define AR5315_LB_TX_DESC_PTR   (AR5315_LOCAL + 0x0200)
+
+#define AR5315_LB_RX_CHAIN_EN   (AR5315_LOCAL + 0x0400)
+#define AR5315_LB_RXEN          0x01
+
+#define AR5315_LB_RX_CHAIN_DIS  (AR5315_LOCAL + 0x0404)
+#define AR5315_LB_RX_DESC_PTR   (AR5315_LOCAL + 0x0408)
+
+#define AR5315_LB_INT_STATUS    (AR5315_LOCAL + 0x0500)
+#define AR5315_INT_TX_DESC      0x0001
+#define AR5315_INT_TX_OK        0x0002
+#define AR5315_INT_TX_ERR       0x0004
+#define AR5315_INT_TX_EOF       0x0008
+#define AR5315_INT_RX_DESC      0x0010
+#define AR5315_INT_RX_OK        0x0020
+#define AR5315_INT_RX_ERR       0x0040
+#define AR5315_INT_RX_EOF       0x0080
+#define AR5315_INT_TX_TRUNC     0x0100
+#define AR5315_INT_TX_STARVE    0x0200
+#define AR5315_INT_LB_TIMEOUT   0x0400
+#define AR5315_INT_LB_ERR       0x0800
+#define AR5315_INT_MBOX_WR      0x1000
+#define AR5315_INT_MBOX_RD      0x2000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR5315_LB_INT_MASK      (AR5315_LOCAL + 0x0504)
+
+#define AR5315_LB_INT_EN        (AR5315_LOCAL + 0x0508)
+#define AR5315_LB_MBOX          (AR5315_LOCAL + 0x0600)
+
+
+
+/*
+ * IR Interface Registers
+ */
+#define AR5315_IR_PKTDATA                   (AR5315_IR + 0x0000)
+
+#define AR5315_IR_PKTLEN                    (AR5315_IR + 0x07fc) /* 0 - 63 */
+
+#define AR5315_IR_CONTROL                   (AR5315_IR + 0x0800)
+#define AR5315_IRCTL_TX                     0x00000000  /* use as tranmitter */
+#define AR5315_IRCTL_RX                     0x00000001  /* use as receiver   */
+#define AR5315_IRCTL_SAMPLECLK_MASK         0x00003ffe  /* Sample clk divisor mask */
+#define AR5315_IRCTL_SAMPLECLK_SHFT                  1
+#define AR5315_IRCTL_OUTPUTCLK_MASK         0x03ffc000  /* Output clk divisor mask */
+#define AR5315_IRCTL_OUTPUTCLK_SHFT                 14
+
+#define AR5315_IR_STATUS                    (AR5315_IR + 0x0804)
+#define AR5315_IRSTS_RX                     0x00000001  /* receive in progress */
+#define AR5315_IRSTS_TX                     0x00000002  /* transmit in progress */
+
+#define AR5315_IR_CONFIG                    (AR5315_IR + 0x0808)
+#define AR5315_IRCFG_INVIN                  0x00000001  /* invert input polarity */
+#define AR5315_IRCFG_INVOUT                 0x00000002  /* invert output polarity */
+#define AR5315_IRCFG_SEQ_START_WIN_SEL      0x00000004  /* 1 => 28, 0 => 7 */
+#define AR5315_IRCFG_SEQ_START_THRESH       0x000000f0  /*  */
+#define AR5315_IRCFG_SEQ_END_UNIT_SEL       0x00000100  /*  */
+#define AR5315_IRCFG_SEQ_END_UNIT_THRESH    0x00007e00  /*  */
+#define AR5315_IRCFG_SEQ_END_WIN_SEL        0x00008000  /*  */
+#define AR5315_IRCFG_SEQ_END_WIN_THRESH     0x001f0000  /*  */
+#define AR5315_IRCFG_NUM_BACKOFF_WORDS      0x01e00000  /*  */
+
+/*
+ * PCI memory constants: Memory area 1 and 2 are the same size -
+ * (twice the PCI_TLB_PAGE_SIZE). The definition of
+ * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine
+ * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size
+ * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space.
+ */
+
+#define CPU_TO_PCI_MEM_BASE1    0xE0000000
+#define CPU_TO_PCI_MEM_SIZE1    (2*PCI_TLB_PAGE_SIZE)
+
+
+/* TLB attributes for PCI transactions */
+
+#define PCI_MMU_PAGEMASK        0x00003FFF
+#define MMU_PAGE_UNCACHED       0x00000010
+#define MMU_PAGE_DIRTY          0x00000004
+#define MMU_PAGE_VALID          0x00000002
+#define MMU_PAGE_GLOBAL         0x00000001
+#define PCI_MMU_PAGEATTRIB      (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\
+                                 MMU_PAGE_VALID|MMU_PAGE_GLOBAL)
+#define PCI_MEMORY_SPACE1_VIRT  0xE0000000      /* Used for non-prefet  mem   */
+#define PCI_MEMORY_SPACE1_PHYS  0x80000000
+#define PCI_TLB_PAGE_SIZE       0x01000000
+#define TLB_HI_MASK             0xFFFFE000
+#define TLB_LO_MASK             0x3FFFFFFF
+#define PAGEMASK_SHIFT          11
+#define TLB_LO_SHIFT            6
+
+#define PCI_MAX_LATENCY         0xFFF           /* Max PCI latency            */
+
+#define HOST_PCI_DEV_ID         3
+#define HOST_PCI_MBAR0          0x10000000
+#define HOST_PCI_MBAR1          0x20000000
+#define HOST_PCI_MBAR2          0x30000000
+
+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1
+#define PCI_DEVICE_MEM_SPACE    0x800000
+
+#endif
+
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h
new file mode 100644 (file)
index 0000000..8148b76
--- /dev/null
@@ -0,0 +1,149 @@
+#ifndef __AR531X_H
+#define __AR531X_H
+
+#include <linux/version.h>
+#include <asm/cpu-info.h>
+#include <ar531x_platform.h>
+#include <ar5312/ar5312.h>
+#include <ar5315/ar5315.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
+extern void (*board_time_init)(void);
+#endif
+
+/*
+ * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
+ * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
+ */
+#ifdef CONFIG_ATHEROS_AR5312
+#define DO_AR5312(...) \
+       if (current_cpu_data.cputype != CPU_4KEC) { \
+               __VA_ARGS__ \
+       }
+#else
+#define DO_AR5312(...)
+#endif
+#ifdef CONFIG_ATHEROS_AR5315
+#define DO_AR5315(...) \
+       if (current_cpu_data.cputype == CPU_4KEC) { \
+               __VA_ARGS__ \
+       }
+#else
+#define DO_AR5315(...)
+#endif
+
+#define AR531X_MISC_IRQ_BASE           0x20
+#define AR531X_GPIO_IRQ_BASE           0x30
+
+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
+#define AR531X_IRQ_NONE                MIPS_CPU_IRQ_BASE+0
+#define AR531X_IRQ_CPU_CLOCK   MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
+
+/* Miscellaneous interrupts, which share IP6 */
+#define AR531X_MISC_IRQ_NONE           AR531X_MISC_IRQ_BASE+0
+#define AR531X_MISC_IRQ_TIMER          AR531X_MISC_IRQ_BASE+1
+#define AR531X_MISC_IRQ_AHB_PROC       AR531X_MISC_IRQ_BASE+2
+#define AR531X_MISC_IRQ_AHB_DMA                AR531X_MISC_IRQ_BASE+3
+#define AR531X_MISC_IRQ_GPIO           AR531X_MISC_IRQ_BASE+4
+#define AR531X_MISC_IRQ_UART0          AR531X_MISC_IRQ_BASE+5
+#define AR531X_MISC_IRQ_UART0_DMA      AR531X_MISC_IRQ_BASE+6
+#define AR531X_MISC_IRQ_WATCHDOG       AR531X_MISC_IRQ_BASE+7
+#define AR531X_MISC_IRQ_LOCAL          AR531X_MISC_IRQ_BASE+8
+#define AR531X_MISC_IRQ_SPI            AR531X_MISC_IRQ_BASE+9
+#define AR531X_MISC_IRQ_COUNT          10
+
+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
+#define AR531X_GPIO_IRQ_NONE            AR531X_GPIO_IRQ_BASE+0
+#define AR531X_GPIO_IRQ(n)              AR531X_GPIO_IRQ_BASE+n
+#define AR531X_GPIO_IRQ_COUNT           22
+
+#define sysRegRead(phys)       \
+       (*(volatile u32 *)KSEG1ADDR(phys))
+
+#define sysRegWrite(phys, val) \
+       ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ar531x_boarddata {
+    u32 magic;                       /* board data is valid */
+#define AR531X_BD_MAGIC 0x35333131   /* "5311", for all 531x platforms */
+    u16 cksum;                       /* checksum (starting with BD_REV 2) */
+    u16 rev;                         /* revision of this struct */
+#define BD_REV  4
+    char   boardName[64];            /* Name of board */
+    u16 major;                       /* Board major number */
+    u16 minor;                       /* Board minor number */
+    u32 config;                      /* Board configuration */
+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
+#define BD_UART1        0x00000004   /* UART1 is stuffed */
+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
+#define BD_SYSLED       0x00000020   /* System LED stuffed */
+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ memCap for testing */
+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
+    u16 resetConfigGpio;             /* Reset factory GPIO pin */
+    u16 sysLedGpio;                  /* System LED GPIO pin */
+
+    u32 cpuFreq;                     /* CPU core frequency in Hz */
+    u32 sysFreq;                     /* System frequency in Hz */
+    u32 cntFreq;                     /* Calculated C0_COUNT frequency */
+
+    u8  wlan0Mac[6];
+    u8  enet0Mac[6];
+    u8  enet1Mac[6];
+
+    u16 pciId;                       /* Pseudo PCIID for common code */
+    u16 memCap;                      /* cap bank1 in MB */
+
+    /* version 3 */
+    u8  wlan1Mac[6];                 /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ             0x1000
+
+extern char *board_config, *radio_config;
+extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
+extern int ar531x_find_config(char *flash_limit);
+
+extern void ar5312_prom_init(void);
+extern void ar5312_misc_intr_init(int irq_base);
+extern void ar5312_plat_setup(void);
+extern asmlinkage void ar5312_irq_dispatch(void);
+
+extern void ar5315_prom_init(void);
+extern void ar5315_misc_intr_init(int irq_base);
+extern void ar5315_plat_setup(void);
+extern asmlinkage void ar5315_irq_dispatch(void);
+extern void ar5315_pci_irq(int irq);
+static inline u32 sysRegMask(u32 phys, u32 mask, u32 value)
+{
+       u32 reg;
+
+       reg = sysRegRead(phys);
+       reg &= ~mask;
+       reg |= value & mask;
+       sysRegWrite(phys, reg);
+       reg = sysRegRead(phys); /* flush write to the hardware */
+
+       return reg;
+}
+
+#define AR531X_NUM_GPIO                8
+
+#endif
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h
new file mode 100644 (file)
index 0000000..bddcd59
--- /dev/null
@@ -0,0 +1,28 @@
+#ifndef __AR531X_PLATFORM_H
+#define __AR531X_PLATFORM_H
+
+/*
+ * Board support data.  The driver is required to locate
+ * and fill-in this information before passing a reference to
+ * this structure as the HAL_BUS_TAG parameter supplied to
+ * ath_hal_attach.
+ */
+struct ar531x_config {
+       const char  *board;     /* board config data */
+       const char      *radio;                 /* radio config data */
+       int             unit;                   /* unit number [0, 1] */
+       u32             tag;                    /* used as devid for now */
+};
+
+struct ar531x_eth {
+       int phy;
+       int mac;
+       u32 reset_base;
+       u32 reset_mac;
+       u32 reset_phy;
+       u32 phy_base;
+       char *board_config;
+       char *macaddr;
+};
+
+#endif /* __AR531X_PLATFORM_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h
new file mode 100644 (file)
index 0000000..97f904b
--- /dev/null
@@ -0,0 +1,84 @@
+/*
+ *  Atheros SoC specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *     Copyright (C) 2003, 2004 Ralf Baechle
+ *     Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core.
+ */
+#define cpu_has_tlb                    1
+#define cpu_has_4kex                   1
+#define cpu_has_3k_cache               0
+#define cpu_has_4k_cache               1
+#define cpu_has_tx39_cache             0
+#define cpu_has_sb1_cache              0
+#define cpu_has_fpu                    0
+#define cpu_has_32fpr                  0
+#define cpu_has_counter                        1
+/* #define cpu_has_watch               ? */
+/* #define cpu_has_divec               ? */
+/* #define cpu_has_vce                 ? */
+/* #define cpu_has_cache_cdex_p                ? */
+/* #define cpu_has_cache_cdex_s                ? */
+/* #define cpu_has_prefetch            ? */
+/* #define cpu_has_mcheck              ? */
+#define cpu_has_ejtag                  1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+#  define cpu_has_llsc                 1
+#else
+/*
+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
+ * ll/sc instructions.
+ */
+#  define cpu_has_llsc                 0
+#endif
+
+#define cpu_has_mips16                 0
+#define cpu_has_mdmx                   0
+#define cpu_has_mips3d                 0
+#define cpu_has_smartmips              0
+
+/* #define cpu_has_vtag_icache         ? */
+/* #define cpu_has_dc_aliases          ? */
+/* #define cpu_has_ic_fills_f_dc       ? */
+/* #define cpu_has_pindexed_dcache     ? */
+
+/* #define cpu_icache_snoops_remote_store      ? */
+
+#define cpu_has_mips32r1               1
+
+#if !defined(CONFIG_ATHEROS_AR5312)
+#  define cpu_has_mips32r2             1
+#endif
+
+#define cpu_has_mips64r1               0
+#define cpu_has_mips64r2               0
+
+#define cpu_has_dsp                    0
+#define cpu_has_mipsmt                 0
+
+/* #define cpu_has_nofpuex             ? */
+#define cpu_has_64bits                 0
+#define cpu_has_64bit_zero_reg         0
+#define cpu_has_64bit_gp_regs          0
+#define cpu_has_64bit_addresses                0
+
+/* #define cpu_has_inclusive_pcaches   ? */
+
+/* #define cpu_dcache_line_size()      ? */
+/* #define cpu_icache_line_size()      ? */
+
+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h
new file mode 100644 (file)
index 0000000..fe53556
--- /dev/null
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+#define PCI_DMA_OFFSET 0x20000000
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+       return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+       return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+       return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+       return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h
new file mode 100644 (file)
index 0000000..d09e59d
--- /dev/null
@@ -0,0 +1,118 @@
+#ifndef _ATHEROS_GPIO_H_
+#define _ATHEROS_GPIO_H_
+
+#include "ar531x.h"
+
+/* Common AR531X global variables */
+/* extern u32 ar531x_gpio_intr_Mask; */
+
+/* AR5312 exported routines */
+#ifdef CONFIG_ATHEROS_AR5312
+asmlinkage void ar5312_gpio_irq_dispatch(void);
+#endif
+
+/* AR5315 exported routines */
+#ifdef CONFIG_ATHEROS_AR5315
+asmlinkage void ar5315_gpio_irq_dispatch(void);
+#endif
+
+/*
+ * Wrappers for the generic GPIO layer
+ */
+
+/* Sets a gpio to input, or returns ENXIO for non-existent gpio */
+static inline int gpio_direction_input(unsigned gpio) {
+       DO_AR5312(      if (gpio > AR531X_NUM_GPIO) {                   \
+                               return -ENXIO;                          \
+                       } else {                                        \
+                               sysRegWrite(AR531X_GPIO_CR,             \
+                                       sysRegRead(AR531X_GPIO_CR) |    \
+                                       AR531X_GPIO_CR_I(gpio) );       \
+                               return 0;                               \
+                       }                                               \
+       )
+       DO_AR5315(      if (gpio > AR5315_NUM_GPIO) {                   \
+                               return -ENXIO;                          \
+                       } else {                                        \
+                               sysRegWrite(AR5315_GPIO_CR,             \
+                                       ( sysRegRead(AR5315_GPIO_CR) &  \
+                                         ~(AR5315_GPIO_CR_M(gpio)) ) | \
+                                         AR5315_GPIO_CR_I(gpio) );     \
+                               return 0;                               \
+                       }                                               \
+       )
+       return -ENXIO;
+}
+
+/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */
+static inline int gpio_direction_output(unsigned gpio, int value) {
+       DO_AR5312(      if (gpio > AR531X_NUM_GPIO) {                   \
+                               return -ENXIO;                          \
+                       } else {                                        \
+                               sysRegWrite(AR531X_GPIO_DO,             \
+                                       ( (sysRegRead(AR531X_GPIO_DO) & \
+                                         ~(1 << gpio) ) |              \
+                                         ((value!=0) << gpio)) );      \
+                               sysRegWrite(AR531X_GPIO_CR,             \
+                                       ( sysRegRead(AR531X_GPIO_CR) &  \
+                                         ~(AR531X_GPIO_CR_M(gpio)) )); \
+                               return 0;                               \
+                       }                                               \
+       )
+       DO_AR5315(      if (gpio > AR5315_NUM_GPIO) {                   \
+                               return -ENXIO;                          \
+                       } else {                                        \
+                               sysRegWrite(AR5315_GPIO_DO,             \
+                                       ( (sysRegRead(AR5315_GPIO_DO) & \
+                                         ~(1 << gpio)) |               \
+                                         ((value!=0) << gpio)) );      \
+                               sysRegWrite(AR5315_GPIO_CR,             \
+                                       sysRegRead(AR5315_GPIO_CR) |    \
+                                       AR5315_GPIO_CR_O(gpio) );       \
+                               return 0;                               \
+                       }                                               \
+       )
+       return -ENXIO;
+}
+
+/* Reads the gpio pin.  Unchecked function */
+static inline int gpio_get_value(unsigned gpio) {
+       DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));)
+       DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));)
+       return 0;
+}
+
+/* Writes to the gpio pin.  Unchecked function */
+static inline void gpio_set_value(unsigned gpio, int value) {
+       DO_AR5312(      sysRegWrite(AR531X_GPIO_DO,     \
+                       ( (sysRegRead(AR531X_GPIO_DO) & \
+                         ~(1 << gpio)) |               \
+                         ((value!=0) << gpio)) );      \
+       )
+       DO_AR5315(      sysRegWrite(AR5315_GPIO_DO,     \
+                       ( (sysRegRead(AR5315_GPIO_DO) & \
+                         ~(1 << gpio)) |               \
+                         ((value!=0) << gpio)) );      \
+       )
+}
+
+static inline int gpio_request(unsigned gpio, const char *label) {
+       return 0;
+}
+
+static inline void gpio_free(unsigned gpio) {
+}
+
+/* Returns IRQ to attach for gpio.  Unchecked function */
+static inline int gpio_to_irq(unsigned gpio) {
+       return AR531X_GPIO_IRQ(gpio);
+}
+
+/* Returns gpio for IRQ attached.  Unchecked function */
+static inline int irq_to_gpio(unsigned irq) {
+       return (irq - (AR531X_GPIO_IRQ(0)));
+}
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h
new file mode 100644 (file)
index 0000000..e9fa4c5
--- /dev/null
@@ -0,0 +1,6 @@
+#ifndef __AR531X_RESET_H
+#define __AR531X_RESET_H
+
+void ar531x_disable_reset_button(void);
+
+#endif /* __AR531X_RESET_H */
diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h
new file mode 100644 (file)
index 0000000..354c6e6
--- /dev/null
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H
+#define __ASM_MIPS_MACH_ATHEROS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR    0
+#define R4600_V1_HIT_CACHEOP_WAR       0
+#define R4600_V2_HIT_CACHEOP_WAR       0
+#define R5432_CP0_INTERRUPT_WAR                0
+#define BCM1250_M3_WAR                 0
+#define SIBYTE_1956_WAR                        0
+#define MIPS4K_ICACHE_REFILL_WAR       0
+#define MIPS_CACHE_SYNC_WAR            0
+#define TX49XX_ICACHE_INDEX_INV_WAR    0
+#define RM9000_CDEX_SMP_WAR            0
+#define ICACHE_REFILLS_WORKAROUND_WAR  0
+#define R10000_LLSC_WAR                        0
+#define MIPS34K_MISSED_ITLB_WAR                0
+
+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */
diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c
new file mode 100644 (file)
index 0000000..92d4fff
--- /dev/null
@@ -0,0 +1,533 @@
+
+/*
+ * MTD driver for the SPI Flash Memory support.
+ *
+ * Copyright (c) 2005-2006 Atheros Communications Inc.
+ * Copyright (C) 2006-2007 FON Technology, SL.
+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*===========================================================================
+** !!!!  VERY IMPORTANT NOTICE !!!!  FLASH DATA STORED IN LITTLE ENDIAN FORMAT
+**
+** This module contains the Serial Flash access routines for the Atheros SOC.
+** The Atheros SOC integrates a SPI flash controller that is used to access
+** serial flash parts. The SPI flash controller executes in "Little Endian"
+** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be
+** BYTESWAPPED! The SPI Flash controller hardware by default performs READ
+** ONLY byteswapping when accessed via the SPI Flash Alias memory region
+** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the
+** flash sectors is stored in "Little Endian" format.
+**
+** The spiflash_write() routine performs byteswapping on all write
+** operations.
+**===========================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <asm/delay.h>
+#include <asm/io.h>
+#include "spiflash.h"
+
+#ifndef __BIG_ENDIAN
+#error This driver currently only works with big endian CPU.
+#endif
+
+#define MAX_PARTS 32
+
+#define SPIFLASH "spiflash: "
+
+#define MIN(a,b)        ((a) < (b) ? (a) : (b))
+
+#define busy_wait(condition, wait) \
+       do { \
+               while (condition) { \
+                       spin_unlock_bh(&spidata->mutex); \
+                       if (wait > 1) \
+                               msleep(wait); \
+                       else if ((wait == 1) && need_resched()) \
+                               schedule(); \
+                       else \
+                               udelay(1); \
+                       spin_lock_bh(&spidata->mutex); \
+               } \
+       } while (0)
+
+
+static __u32 spiflash_regread32(int reg);
+static void spiflash_regwrite32(int reg, __u32 data);
+static __u32 spiflash_sendcmd (int op, u32 addr);
+
+int __init spiflash_init (void);
+void __exit spiflash_exit (void);
+static int spiflash_probe_chip (void);
+static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr);
+static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf);
+static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf);
+
+/* Flash configuration table */
+struct flashconfig {
+    __u32 byte_cnt;
+    __u32 sector_cnt;
+    __u32 sector_size;
+    __u32 cs_addrmask;
+} flashconfig_tbl[MAX_FLASH] =
+    {
+        { 0, 0, 0, 0},
+        { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0},
+        { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0},
+        { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0},
+        { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0},
+        { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0}
+    };
+
+/* Mapping of generic opcodes to STM serial flash opcodes */
+#define SPI_WRITE_ENABLE    0
+#define SPI_WRITE_DISABLE   1
+#define SPI_RD_STATUS       2
+#define SPI_WR_STATUS       3
+#define SPI_RD_DATA         4
+#define SPI_FAST_RD_DATA    5
+#define SPI_PAGE_PROGRAM    6
+#define SPI_SECTOR_ERASE    7
+#define SPI_BULK_ERASE      8
+#define SPI_DEEP_PWRDOWN    9
+#define SPI_RD_SIG          10
+#define SPI_MAX_OPCODES     11
+
+struct opcodes {
+    __u16 code;
+    __s8 tx_cnt;
+    __s8 rx_cnt;
+} stm_opcodes[] = {
+        {STM_OP_WR_ENABLE, 1, 0},
+        {STM_OP_WR_DISABLE, 1, 0},
+        {STM_OP_RD_STATUS, 1, 1},
+        {STM_OP_WR_STATUS, 1, 0},
+        {STM_OP_RD_DATA, 4, 4},
+        {STM_OP_FAST_RD_DATA, 5, 0},
+        {STM_OP_PAGE_PGRM, 8, 0},
+        {STM_OP_SECTOR_ERASE, 4, 0},
+        {STM_OP_BULK_ERASE, 1, 0},
+        {STM_OP_DEEP_PWRDOWN, 1, 0},
+        {STM_OP_RD_SIG, 4, 1},
+};
+
+/* Driver private data structure */
+struct spiflash_data {
+       struct  mtd_info       *mtd;
+       struct  mtd_partition  *parsed_parts;     /* parsed partitions */
+       void    *readaddr; /* memory mapped data for read  */
+       void    *mmraddr;  /* memory mapped register space */
+       wait_queue_head_t wq;
+       spinlock_t mutex;
+       int state;
+};
+enum {
+       FL_READY,
+       FL_READING,
+       FL_ERASING,
+       FL_WRITING
+};
+
+static struct spiflash_data *spidata;
+
+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
+
+/***************************************************************************************************/
+
+static __u32
+spiflash_regread32(int reg)
+{
+       volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg);
+
+       return (*data);
+}
+
+static void
+spiflash_regwrite32(int reg, __u32 data)
+{
+       volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg);
+
+       *addr = data;
+       return;
+}
+
+
+static __u32
+spiflash_sendcmd (int op, u32 addr)
+{
+        u32 reg;
+        u32 mask;
+       struct opcodes *ptr_opcode;
+
+       ptr_opcode = &stm_opcodes[op];
+       busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+       spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8));
+
+       reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt |
+               (ptr_opcode->rx_cnt << 4) | SPI_CTL_START;
+
+       spiflash_regwrite32(SPI_FLASH_CTL, reg);
+       busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0);
+
+       if (!ptr_opcode->rx_cnt)
+               return 0;
+
+       reg = (__u32) spiflash_regread32(SPI_FLASH_DATA);
+
+       switch (ptr_opcode->rx_cnt) {
+       case 1:
+                       mask = 0x000000ff;
+                       break;
+       case 2:
+                       mask = 0x0000ffff;
+                       break;
+       case 3:
+                       mask = 0x00ffffff;
+                       break;
+       default:
+                       mask = 0xffffffff;
+                       break;
+       }
+       reg &= mask;
+
+       return reg;
+}
+
+
+
+/* Probe SPI flash device
+ * Function returns 0 for failure.
+ * and flashconfig_tbl array index for success.
+ */
+static int
+spiflash_probe_chip (void)
+{
+       __u32 sig;
+       int flash_size;
+
+       /* Read the signature on the flash device */
+       spin_lock_bh(&spidata->mutex);
+       sig = spiflash_sendcmd(SPI_RD_SIG, 0);
+       spin_unlock_bh(&spidata->mutex);
+
+       switch (sig) {
+       case STM_8MBIT_SIGNATURE:
+               flash_size = FLASH_1MB;
+               break;
+        case STM_16MBIT_SIGNATURE:
+               flash_size = FLASH_2MB;
+               break;
+        case STM_32MBIT_SIGNATURE:
+               flash_size = FLASH_4MB;
+               break;
+        case STM_64MBIT_SIGNATURE:
+               flash_size = FLASH_8MB;
+               break;
+        case STM_128MBIT_SIGNATURE:
+               flash_size = FLASH_16MB;
+               break;
+        default:
+               printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n");
+               return (0);
+       }
+
+       return (flash_size);
+}
+
+
+/* wait until the flash chip is ready and grab a lock */
+static int spiflash_wait_ready(int state)
+{
+       DECLARE_WAITQUEUE(wait, current);
+
+retry:
+       spin_lock_bh(&spidata->mutex);
+       if (spidata->state != FL_READY) {
+               set_current_state(TASK_UNINTERRUPTIBLE);
+               add_wait_queue(&spidata->wq, &wait);
+               spin_unlock_bh(&spidata->mutex);
+               schedule();
+               remove_wait_queue(&spidata->wq, &wait);
+
+               if(signal_pending(current))
+                       return 0;
+
+               goto retry;
+       }
+       spidata->state = state;
+
+       return 1;
+}
+
+static inline void spiflash_done(void)
+{
+       spidata->state = FL_READY;
+       spin_unlock_bh(&spidata->mutex);
+       wake_up(&spidata->wq);
+}
+
+static int
+spiflash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+       struct opcodes *ptr_opcode;
+       u32 temp, reg;
+
+       /* sanity checks */
+       if (instr->addr + instr->len > mtd->size) return (-EINVAL);
+
+       if (!spiflash_wait_ready(FL_ERASING))
+               return -EINTR;
+
+       spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+       busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0);
+       reg = spiflash_regread32(SPI_FLASH_CTL);
+
+       ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE];
+       temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code);
+       spiflash_regwrite32(SPI_FLASH_OPCODE, temp);
+
+       reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START;
+       spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+       /* this will take some time */
+       spin_unlock_bh(&spidata->mutex);
+       msleep(800);
+       spin_lock_bh(&spidata->mutex);
+
+       busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20);
+       spiflash_done();
+
+       instr->state = MTD_ERASE_DONE;
+       if (instr->callback) instr->callback (instr);
+
+       return 0;
+}
+
+static int
+spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+       u8 *read_addr;
+
+       /* sanity checks */
+       if (!len) return (0);
+       if (from + len > mtd->size) return (-EINVAL);
+
+       /* we always read len bytes */
+       *retlen = len;
+
+       if (!spiflash_wait_ready(FL_READING))
+               return -EINTR;
+       read_addr = (u8 *)(spidata->readaddr + from);
+       memcpy(buf, read_addr, len);
+       spiflash_done();
+
+       return 0;
+}
+
+static int
+spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+       u32 opcode, bytes_left;
+
+       *retlen = 0;
+
+       /* sanity checks */
+       if (!len) return (0);
+       if (to + len > mtd->size) return (-EINVAL);
+
+       opcode = stm_opcodes[SPI_PAGE_PROGRAM].code;
+       bytes_left = len;
+
+       do {
+               u32 xact_len, reg, page_offset, spi_data = 0;
+
+               xact_len = MIN(bytes_left, sizeof(__u32));
+
+               /* 32-bit writes cannot span across a page boundary
+                * (256 bytes). This types of writes require two page
+                * program operations to handle it correctly. The STM part
+                * will write the overflow data to the beginning of the
+                * current page as opposed to the subsequent page.
+                */
+               page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len;
+
+               if (page_offset > STM_PAGE_SIZE) {
+                       xact_len -= (page_offset - STM_PAGE_SIZE);
+               }
+
+               if (!spiflash_wait_ready(FL_WRITING))
+                       return -EINTR;
+
+               spiflash_sendcmd(SPI_WRITE_ENABLE, 0);
+               switch (xact_len) {
+                       case 1:
+                               spi_data = (u32) ((u8) *buf);
+                               break;
+                       case 2:
+                               spi_data = (buf[1] << 8) | buf[0];
+                               break;
+                       case 3:
+                               spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0];
+                               break;
+                       case 4:
+                               spi_data = (buf[3] << 24) | (buf[2] << 16) |
+                                                       (buf[1] << 8) | buf[0];
+                               break;
+                       default:
+                               spi_data = 0;
+                               break;
+               }
+
+               spiflash_regwrite32(SPI_FLASH_DATA, spi_data);
+               opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8);
+               spiflash_regwrite32(SPI_FLASH_OPCODE, opcode);
+
+               reg = spiflash_regread32(SPI_FLASH_CTL);
+               reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START;
+               spiflash_regwrite32(SPI_FLASH_CTL, reg);
+
+               /* give the chip some time before we start busy waiting */
+               spin_unlock_bh(&spidata->mutex);
+               schedule();
+               spin_lock_bh(&spidata->mutex);
+
+               busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0);
+               spiflash_done();
+
+               bytes_left -= xact_len;
+               to += xact_len;
+               buf += xact_len;
+
+               *retlen += xact_len;
+       } while (bytes_left != 0);
+
+       return 0;
+}
+
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL };
+#endif
+
+
+static int spiflash_probe(struct platform_device *pdev)
+{
+       int result = -1;
+       int index, num_parts;
+       struct mtd_info *mtd;
+
+       spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE);
+       spin_lock_init(&spidata->mutex);
+       init_waitqueue_head(&spidata->wq);
+       spidata->state = FL_READY;
+
+       if (!spidata->mmraddr) {
+               printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+               kfree(spidata);
+               spidata = NULL;
+       }
+
+       mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+       if (!mtd) {
+               kfree(spidata);
+               return -ENXIO;
+       }
+
+       if (!(index = spiflash_probe_chip())) {
+       printk (KERN_WARNING SPIFLASH "Found no serial flash device\n");
+               goto error;
+       }
+
+       spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt);
+       if (!spidata->readaddr) {
+               printk (KERN_WARNING SPIFLASH "Failed to map flash device\n");
+               goto error;
+       }
+
+       mtd->name = "spiflash";
+       mtd->type = MTD_NORFLASH;
+       mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE);
+       mtd->size = flashconfig_tbl[index].byte_cnt;
+       mtd->erasesize = flashconfig_tbl[index].sector_size;
+       mtd->writesize = 1;
+       mtd->numeraseregions = 0;
+       mtd->eraseregions = NULL;
+       mtd->erase = spiflash_erase;
+       mtd->read = spiflash_read;
+       mtd->write = spiflash_write;
+       mtd->owner = THIS_MODULE;
+
+       /* parse redboot partitions */
+       num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0);
+       if (!num_parts)
+               goto error;
+
+       result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts);
+       spidata->mtd = mtd;
+
+       return (result);
+
+error:
+       kfree(mtd);
+       kfree(spidata);
+       return -ENXIO;
+}
+
+static int spiflash_remove (struct platform_device *pdev)
+{
+       del_mtd_partitions (spidata->mtd);
+       kfree(spidata->mtd);
+       return 0;
+}
+
+struct platform_driver spiflash_driver = {
+       .driver.name = "spiflash",
+       .probe = spiflash_probe,
+       .remove = spiflash_remove,
+};
+
+int __init
+spiflash_init (void)
+{
+       spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL);
+       if (!spidata)
+               return (-ENXIO);
+
+       spin_lock_init(&spidata->mutex);
+       platform_driver_register(&spiflash_driver);
+
+       return 0;
+}
+
+void __exit
+spiflash_exit (void)
+{
+       kfree(spidata);
+}
+
+module_init (spiflash_init);
+module_exit (spiflash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc");
+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC");
+
diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h
new file mode 100644 (file)
index 0000000..2553c6f
--- /dev/null
@@ -0,0 +1,120 @@
+/*
+ * SPI Flash Memory support header file.
+ *
+ * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $
+ *
+ *
+ * Copyright (c) 2005, Atheros Communications Inc.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define FLASH_1MB  1
+#define FLASH_2MB  2
+#define FLASH_4MB  3
+#define FLASH_8MB  4
+#define FLASH_16MB 5
+#define MAX_FLASH  6
+
+#define STM_PAGE_SIZE           256
+
+#define SFI_WRITE_BUFFER_SIZE   4
+#define SFI_FLASH_ADDR_MASK     0x00ffffff
+
+#define STM_8MBIT_SIGNATURE     0x13
+#define STM_M25P80_BYTE_COUNT   1048576
+#define STM_M25P80_SECTOR_COUNT 16
+#define STM_M25P80_SECTOR_SIZE  0x10000
+
+#define STM_16MBIT_SIGNATURE    0x14
+#define STM_M25P16_BYTE_COUNT   2097152
+#define STM_M25P16_SECTOR_COUNT 32
+#define STM_M25P16_SECTOR_SIZE  0x10000
+
+#define STM_32MBIT_SIGNATURE    0x15
+#define STM_M25P32_BYTE_COUNT   4194304
+#define STM_M25P32_SECTOR_COUNT 64
+#define STM_M25P32_SECTOR_SIZE  0x10000
+
+#define STM_64MBIT_SIGNATURE    0x16
+#define STM_M25P64_BYTE_COUNT   8388608
+#define STM_M25P64_SECTOR_COUNT 128
+#define STM_M25P64_SECTOR_SIZE  0x10000
+
+#define STM_128MBIT_SIGNATURE   0x17
+#define STM_M25P128_BYTE_COUNT   16777216
+#define STM_M25P128_SECTOR_COUNT 256
+#define STM_M25P128_SECTOR_SIZE  0x10000
+
+#define STM_1MB_BYTE_COUNT   STM_M25P80_BYTE_COUNT
+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT
+#define STM_1MB_SECTOR_SIZE  STM_M25P80_SECTOR_SIZE
+#define STM_2MB_BYTE_COUNT   STM_M25P16_BYTE_COUNT
+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT
+#define STM_2MB_SECTOR_SIZE  STM_M25P16_SECTOR_SIZE
+#define STM_4MB_BYTE_COUNT   STM_M25P32_BYTE_COUNT
+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT
+#define STM_4MB_SECTOR_SIZE  STM_M25P32_SECTOR_SIZE
+#define STM_8MB_BYTE_COUNT   STM_M25P64_BYTE_COUNT
+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT
+#define STM_8MB_SECTOR_SIZE  STM_M25P64_SECTOR_SIZE
+#define STM_16MB_BYTE_COUNT   STM_M25P128_BYTE_COUNT
+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT
+#define STM_16MB_SECTOR_SIZE  STM_M25P128_SECTOR_SIZE
+
+/*
+ * ST Microelectronics Opcodes for Serial Flash
+ */
+
+#define STM_OP_WR_ENABLE       0x06     /* Write Enable */
+#define STM_OP_WR_DISABLE      0x04     /* Write Disable */
+#define STM_OP_RD_STATUS       0x05     /* Read Status */
+#define STM_OP_WR_STATUS       0x01     /* Write Status */
+#define STM_OP_RD_DATA         0x03     /* Read Data */
+#define STM_OP_FAST_RD_DATA    0x0b     /* Fast Read Data */
+#define STM_OP_PAGE_PGRM       0x02     /* Page Program */
+#define STM_OP_SECTOR_ERASE    0xd8     /* Sector Erase */
+#define STM_OP_BULK_ERASE      0xc7     /* Bulk Erase */
+#define STM_OP_DEEP_PWRDOWN    0xb9     /* Deep Power-Down Mode */
+#define STM_OP_RD_SIG          0xab     /* Read Electronic Signature */
+
+#define STM_STATUS_WIP       0x01       /* Write-In-Progress */
+#define STM_STATUS_WEL       0x02       /* Write Enable Latch */
+#define STM_STATUS_BP0       0x04       /* Block Protect 0 */
+#define STM_STATUS_BP1       0x08       /* Block Protect 1 */
+#define STM_STATUS_BP2       0x10       /* Block Protect 2 */
+#define STM_STATUS_SRWD      0x80       /* Status Register Write Disable */
+
+/*
+ * SPI Flash Interface Registers
+ */
+#define AR531XPLUS_SPI_READ     0x08000000
+#define AR531XPLUS_SPI_MMR      0x11300000
+#define AR531XPLUS_SPI_MMR_SIZE 12
+
+#define AR531XPLUS_SPI_CTL      0x00
+#define AR531XPLUS_SPI_OPCODE   0x04
+#define AR531XPLUS_SPI_DATA     0x08
+
+#define SPI_FLASH_READ          AR531XPLUS_SPI_READ
+#define SPI_FLASH_MMR           AR531XPLUS_SPI_MMR
+#define SPI_FLASH_MMR_SIZE      AR531XPLUS_SPI_MMR_SIZE
+#define SPI_FLASH_CTL           AR531XPLUS_SPI_CTL
+#define SPI_FLASH_OPCODE        AR531XPLUS_SPI_OPCODE
+#define SPI_FLASH_DATA          AR531XPLUS_SPI_DATA
+
+#define SPI_CTL_START           0x00000100
+#define SPI_CTL_BUSY            0x00010000
+#define SPI_CTL_TXCNT_MASK      0x0000000f
+#define SPI_CTL_RXCNT_MASK      0x000000f0
+#define SPI_CTL_TX_RX_CNT_MASK  0x000000ff
+#define SPI_CTL_SIZE_MASK       0x00060000
+
+#define SPI_CTL_CLK_SEL_MASK    0x03000000
+#define SPI_OPCODE_MASK         0x000000ff
+
+#define SPI_STATUS_WIP         STM_STATUS_WIP
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile
new file mode 100644 (file)
index 0000000..9eb63e4
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for the AR2313 ethernet driver
+#
+
+obj-$(CONFIG_AR2313)   += ar2313.o
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c
new file mode 100644 (file)
index 0000000..727d190
--- /dev/null
@@ -0,0 +1,1409 @@
+/*
+ * ar2313.c: Linux driver for the Atheros AR231x Ethernet device.
+ *
+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Thanks to Atheros for providing hardware and documentation
+ * enabling me to write this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Additional credits:
+ *     This code is taken from John Taylor's Sibyte driver and then
+ *     modified for the AR2313.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/sockios.h>
+#include <linux/pkt_sched.h>
+#include <linux/compile.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/ethtool.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+
+#include <net/sock.h>
+#include <net/ip.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/bootinfo.h>
+
+#define AR2313_MTU                     1692
+#define AR2313_PRIOS                   1
+#define AR2313_QUEUES                  (2*AR2313_PRIOS)
+#define AR2313_DESCR_ENTRIES           64
+
+#undef INDEX_DEBUG
+#define DEBUG     0
+#define DEBUG_TX  0
+#define DEBUG_RX  0
+#define DEBUG_INT 0
+#define DEBUG_MC  0
+#define DEBUG_ERR 1
+
+#ifndef min
+#define min(a,b)       (((a)<(b))?(a):(b))
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES        L1_CACHE_BYTES
+#endif
+
+#define AR2313_MBOX_SET_BIT  0x8
+
+#define BOARD_IDX_STATIC       0
+#define BOARD_IDX_OVERFLOW     -1
+
+#include "dma.h"
+#include "ar2313.h"
+
+/*
+ * New interrupt handler strategy:
+ *
+ * An old interrupt handler worked using the traditional method of
+ * replacing an skbuff with a new one when a packet arrives. However
+ * the rx rings do not need to contain a static number of buffer
+ * descriptors, thus it makes sense to move the memory allocation out
+ * of the main interrupt handler and do it in a bottom half handler
+ * and only allocate new buffers when the number of buffers in the
+ * ring is below a certain threshold. In order to avoid starving the
+ * NIC under heavy load it is however necessary to force allocation
+ * when hitting a minimum threshold. The strategy for alloction is as
+ * follows:
+ *
+ *     RX_LOW_BUF_THRES    - allocate buffers in the bottom half
+ *     RX_PANIC_LOW_THRES  - we are very low on buffers, allocate
+ *                           the buffers in the interrupt handler
+ *     RX_RING_THRES       - maximum number of buffers in the rx ring
+ *
+ * One advantagous side effect of this allocation approach is that the
+ * entire rx processing can be done without holding any spin lock
+ * since the rx rings and registers are totally independent of the tx
+ * ring and its registers.  This of course includes the kmalloc's of
+ * new skb's. Thus start_xmit can run in parallel with rx processing
+ * and the memory allocation on SMP systems.
+ *
+ * Note that running the skb reallocation in a bottom half opens up
+ * another can of races which needs to be handled properly. In
+ * particular it can happen that the interrupt handler tries to run
+ * the reallocation while the bottom half is either running on another
+ * CPU or was interrupted on the same CPU. To get around this the
+ * driver uses bitops to prevent the reallocation routines from being
+ * reentered.
+ *
+ * TX handling can also be done without holding any spin lock, wheee
+ * this is fun! since tx_csm is only written to by the interrupt
+ * handler.
+ */
+
+/*
+ * Threshold values for RX buffer allocation - the low water marks for
+ * when to start refilling the rings are set to 75% of the ring
+ * sizes. It seems to make sense to refill the rings entirely from the
+ * intrrupt handler once it gets below the panic threshold, that way
+ * we don't risk that the refilling is moved to another CPU when the
+ * one running the interrupt handler just got the slab code hot in its
+ * cache.
+ */
+#define RX_RING_SIZE           AR2313_DESCR_ENTRIES
+#define RX_PANIC_THRES         (RX_RING_SIZE/4)
+#define RX_LOW_THRES           ((3*RX_RING_SIZE)/4)
+#define CRC_LEN                 4
+#define RX_OFFSET               2
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define VLAN_HDR                4
+#else
+#define VLAN_HDR                0
+#endif
+
+#define AR2313_BUFSIZE         (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET)
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
+MODULE_DESCRIPTION("AR2313 Ethernet driver");
+#endif
+
+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
+
+// prototypes
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+static void ar2313_halt(struct net_device *dev);
+static void rx_tasklet_func(unsigned long data);
+static void rx_tasklet_cleanup(struct net_device *dev);
+static void ar2313_multicast_list(struct net_device *dev);
+
+static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
+static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+static int mdiobus_reset(struct mii_bus *bus);
+static int mdiobus_probe (struct net_device *dev);
+static void ar2313_adjust_link(struct net_device *dev);
+
+#ifndef ERR
+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+#endif
+
+
+int __init ar2313_probe(struct platform_device *pdev)
+{
+       struct net_device *dev;
+       struct ar2313_private *sp;
+       struct resource *res;
+       unsigned long ar_eth_base;
+       char buf[64];
+
+       dev = alloc_etherdev(sizeof(struct ar2313_private));
+
+       if (dev == NULL) {
+               printk(KERN_ERR
+                          "ar2313: Unable to allocate net_device structure!\n");
+               return -ENOMEM;
+       }
+
+       platform_set_drvdata(pdev, dev);
+
+       sp = netdev_priv(dev);
+       sp->dev = dev;
+       sp->cfg = pdev->dev.platform_data;
+
+       sprintf(buf, "eth%d_membase", pdev->id);
+       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf);
+       if (!res)
+               return -ENODEV;
+
+       sp->link = 0;
+       ar_eth_base = res->start;
+       sp->phy = sp->cfg->phy;
+
+       sprintf(buf, "eth%d_irq", pdev->id);
+       dev->irq = platform_get_irq_byname(pdev, buf);
+
+       spin_lock_init(&sp->lock);
+
+       /* initialize func pointers */
+       dev->open = &ar2313_open;
+       dev->stop = &ar2313_close;
+       dev->hard_start_xmit = &ar2313_start_xmit;
+
+       dev->set_multicast_list = &ar2313_multicast_list;
+#ifdef TX_TIMEOUT
+       dev->tx_timeout = ar2313_tx_timeout;
+       dev->watchdog_timeo = AR2313_TX_TIMEOUT;
+#endif
+       dev->do_ioctl = &ar2313_ioctl;
+
+       // SAMEER: do we need this?
+       dev->features |= NETIF_F_HIGHDMA;
+
+       tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+       tasklet_disable(&sp->rx_tasklet);
+
+       sp->eth_regs =
+               ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs));
+       if (!sp->eth_regs) {
+               printk("Can't remap eth registers\n");
+               return (-ENXIO);
+       }
+
+       /*
+        * When there's only one MAC, PHY regs are typically on ENET0,
+        * even though the MAC might be on ENET1.
+        * Needto remap PHY regs separately in this case
+        */
+       if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs))
+               sp->phy_regs = sp->eth_regs;
+       else {
+               sp->phy_regs =
+                       ioremap_nocache(virt_to_phys(sp->cfg->phy_base),
+                                                       sizeof(*sp->phy_regs));
+               if (!sp->phy_regs) {
+                       printk("Can't remap phy registers\n");
+                       return (-ENXIO);
+               }
+       }
+
+       sp->dma_regs =
+               ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000),
+                                               sizeof(*sp->dma_regs));
+       dev->base_addr = (unsigned int) sp->dma_regs;
+       if (!sp->dma_regs) {
+               printk("Can't remap DMA registers\n");
+               return (-ENXIO);
+       }
+
+       sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
+       if (!sp->int_regs) {
+               printk("Can't remap INTERRUPT registers\n");
+               return (-ENXIO);
+       }
+
+       strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
+       sp->name[sizeof(sp->name) - 1] = '\0';
+       memcpy(dev->dev_addr, sp->cfg->macaddr, 6);
+       sp->board_idx = BOARD_IDX_STATIC;
+
+       if (ar2313_init(dev)) {
+               /*
+                * ar2313_init() calls ar2313_init_cleanup() on error.
+                */
+               kfree(dev);
+               return -ENODEV;
+       }
+
+       if (register_netdev(dev)) {
+               printk("%s: register_netdev failed\n", __func__);
+               return -1;
+       }
+
+       printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
+                  dev->name, sp->name,
+                  dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+                  dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+
+       sp->mii_bus.priv = dev;
+       sp->mii_bus.read = mdiobus_read;
+       sp->mii_bus.write = mdiobus_write;
+       sp->mii_bus.reset = mdiobus_reset;
+       sp->mii_bus.name = "ar2313_eth_mii";
+       sp->mii_bus.id = 0;
+       sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+       *sp->mii_bus.irq = PHY_POLL;
+
+       mdiobus_register(&sp->mii_bus);
+
+       if (mdiobus_probe(dev) != 0) {
+               printk(KERN_ERR "ar2313: mdiobus_probe failed");
+               rx_tasklet_cleanup(dev);
+               ar2313_init_cleanup(dev);
+               unregister_netdev(dev);
+               kfree(dev);
+       } else {
+               /* start link poll timer */
+               ar2313_setup_timer(dev);
+       }
+
+       return 0;
+}
+
+#if 0
+static void ar2313_dump_regs(struct net_device *dev)
+{
+       unsigned int *ptr, i;
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       ptr = (unsigned int *) sp->eth_regs;
+       for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int));
+                i++, ptr++) {
+               printk("ENET: %08x = %08x\n", (int) ptr, *ptr);
+       }
+
+       ptr = (unsigned int *) sp->dma_regs;
+       for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) {
+               printk("DMA: %08x = %08x\n", (int) ptr, *ptr);
+       }
+
+       ptr = (unsigned int *) sp->int_regs;
+       for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) {
+               printk("INT: %08x = %08x\n", (int) ptr, *ptr);
+       }
+
+       for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
+               ar2313_descr_t *td = &sp->tx_ring[i];
+               printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
+                          td->status, td->devcs, td->addr, td->descr);
+       }
+}
+#endif
+
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned long flags;
+
+#if DEBUG_TX
+       printk("Tx timeout\n");
+#endif
+       spin_lock_irqsave(&sp->lock, flags);
+       ar2313_restart(dev);
+       spin_unlock_irqrestore(&sp->lock, flags);
+}
+#endif
+
+#if DEBUG_MC
+static void printMcList(struct net_device *dev)
+{
+       struct dev_mc_list *list = dev->mc_list;
+       int num = 0, i;
+       while (list) {
+               printk("%d MC ADDR ", num);
+               for (i = 0; i < list->dmi_addrlen; i++) {
+                       printk(":%02x", list->dmi_addr[i]);
+               }
+               list = list->next;
+               printk("\n");
+       }
+}
+#endif
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * THIS IS ABSOLUTE CRAP, disabled
+ */
+static void ar2313_multicast_list(struct net_device *dev)
+{
+       /*
+        * Always listen to broadcasts and
+        * treat IFF bits independently
+        */
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned int recognise;
+
+       recognise = sp->eth_regs->mac_control;
+
+       if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+               recognise |= MAC_CONTROL_PR;
+       } else {
+               recognise &= ~MAC_CONTROL_PR;
+       }
+
+       if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
+#if DEBUG_MC
+               printMcList(dev);
+               printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__,
+                          dev->mc_count);
+#endif
+               recognise |= MAC_CONTROL_PM;    /* all multicast */
+       } else if (dev->mc_count > 0) {
+#if DEBUG_MC
+               printMcList(dev);
+               printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
+#endif
+               recognise |= MAC_CONTROL_PM;    /* for the time being */
+       }
+#if DEBUG_MC
+       printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs,
+                  recognise);
+#endif
+
+       sp->eth_regs->mac_control = recognise;
+}
+
+static void rx_tasklet_cleanup(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       /*
+        * Tasklet may be scheduled. Need to get it removed from the list
+        * since we're about to free the struct.
+        */
+
+       sp->unloading = 1;
+       tasklet_enable(&sp->rx_tasklet);
+       tasklet_kill(&sp->rx_tasklet);
+}
+
+static int __exit ar2313_remove(struct platform_device *pdev)
+{
+       struct net_device *dev = platform_get_drvdata(pdev);
+       rx_tasklet_cleanup(dev);
+       ar2313_init_cleanup(dev);
+       unregister_netdev(dev);
+       kfree(dev);
+       return 0;
+}
+
+
+/*
+ * Restart the AR2313 ethernet controller.
+ */
+static int ar2313_restart(struct net_device *dev)
+{
+       /* disable interrupts */
+       disable_irq(dev->irq);
+
+       /* stop mac */
+       ar2313_halt(dev);
+
+       /* initialize */
+       ar2313_init(dev);
+
+       /* enable interrupts */
+       enable_irq(dev->irq);
+
+       return 0;
+}
+
+static struct platform_driver ar2313_driver = {
+       .driver.name = "ar531x-eth",
+       .probe = ar2313_probe,
+       .remove = ar2313_remove,
+};
+
+int __init ar2313_module_init(void)
+{
+       return platform_driver_register(&ar2313_driver);
+}
+
+void __exit ar2313_module_cleanup(void)
+{
+       platform_driver_unregister(&ar2313_driver);
+}
+
+module_init(ar2313_module_init);
+module_exit(ar2313_module_cleanup);
+
+
+static void ar2313_free_descriptors(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       if (sp->rx_ring != NULL) {
+               kfree((void *) KSEG0ADDR(sp->rx_ring));
+               sp->rx_ring = NULL;
+               sp->tx_ring = NULL;
+       }
+}
+
+
+static int ar2313_allocate_descriptors(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       int size;
+       int j;
+       ar2313_descr_t *space;
+
+       if (sp->rx_ring != NULL) {
+               printk("%s: already done.\n", __FUNCTION__);
+               return 0;
+       }
+
+       size =
+               (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
+       space = kmalloc(size, GFP_KERNEL);
+       if (space == NULL)
+               return 1;
+
+       /* invalidate caches */
+       dma_cache_inv((unsigned int) space, size);
+
+       /* now convert pointer to KSEG1 */
+       space = (ar2313_descr_t *) KSEG1ADDR(space);
+
+       memset((void *) space, 0, size);
+
+       sp->rx_ring = space;
+       space += AR2313_DESCR_ENTRIES;
+
+       sp->tx_ring = space;
+       space += AR2313_DESCR_ENTRIES;
+
+       /* Initialize the transmit Descriptors */
+       for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+               ar2313_descr_t *td = &sp->tx_ring[j];
+               td->status = 0;
+               td->devcs = DMA_TX1_CHAINED;
+               td->addr = 0;
+               td->descr =
+                       virt_to_phys(&sp->
+                                                tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+       }
+
+       return 0;
+}
+
+
+/*
+ * Generic cleanup handling data allocated during init. Used when the
+ * module is unloaded or if an error occurs during initialization
+ */
+static void ar2313_init_cleanup(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       struct sk_buff *skb;
+       int j;
+
+       ar2313_free_descriptors(dev);
+
+       if (sp->eth_regs)
+               iounmap((void *) sp->eth_regs);
+       if (sp->dma_regs)
+               iounmap((void *) sp->dma_regs);
+
+       if (sp->rx_skb) {
+               for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+                       skb = sp->rx_skb[j];
+                       if (skb) {
+                               sp->rx_skb[j] = NULL;
+                               dev_kfree_skb(skb);
+                       }
+               }
+               kfree(sp->rx_skb);
+               sp->rx_skb = NULL;
+       }
+
+       if (sp->tx_skb) {
+               for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+                       skb = sp->tx_skb[j];
+                       if (skb) {
+                               sp->tx_skb[j] = NULL;
+                               dev_kfree_skb(skb);
+                       }
+               }
+               kfree(sp->tx_skb);
+               sp->tx_skb = NULL;
+       }
+}
+
+static int ar2313_setup_timer(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       init_timer(&sp->link_timer);
+
+       sp->link_timer.function = ar2313_link_timer_fn;
+       sp->link_timer.data = (int) dev;
+       sp->link_timer.expires = jiffies + HZ;
+
+       add_timer(&sp->link_timer);
+       return 0;
+
+}
+
+static void ar2313_link_timer_fn(unsigned long data)
+{
+       struct net_device *dev = (struct net_device *) data;
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       // see if the link status changed
+       // This was needed to make sure we set the PHY to the
+       // autonegotiated value of half or full duplex.
+       ar2313_check_link(dev);
+
+       // Loop faster when we don't have link.
+       // This was needed to speed up the AP bootstrap time.
+       if (sp->link == 0) {
+               mod_timer(&sp->link_timer, jiffies + HZ / 2);
+       } else {
+               mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
+       }
+}
+
+static void ar2313_check_link(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       u16 phyData;
+
+       phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
+       if (sp->phyData != phyData) {
+               if (phyData & BMSR_LSTATUS) {
+                       /* link is present, ready link partner ability to deterine
+                          duplexity */
+                       int duplex = 0;
+                       u16 reg;
+
+                       sp->link = 1;
+                       reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
+                       if (reg & BMCR_ANENABLE) {
+                               /* auto neg enabled */
+                               reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
+                               duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
+                       } else {
+                               /* no auto neg, just read duplex config */
+                               duplex = (reg & BMCR_FULLDPLX) ? 1 : 0;
+                       }
+
+                       printk(KERN_INFO "%s: Configuring MAC for %s duplex\n",
+                                  dev->name, (duplex) ? "full" : "half");
+
+                       if (duplex) {
+                               /* full duplex */
+                               sp->eth_regs->mac_control =
+                                       ((sp->eth_regs->
+                                         mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO);
+                       } else {
+                               /* half duplex */
+                               sp->eth_regs->mac_control =
+                                       ((sp->eth_regs->
+                                         mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F);
+                       }
+               } else {
+                       /* no link */
+                       sp->link = 0;
+               }
+               sp->phyData = phyData;
+       }
+}
+
+static int ar2313_reset_reg(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned int ethsal, ethsah;
+       unsigned int flags;
+
+       *sp->int_regs |= sp->cfg->reset_mac;
+       mdelay(10);
+       *sp->int_regs &= ~sp->cfg->reset_mac;
+       mdelay(10);
+       *sp->int_regs |= sp->cfg->reset_phy;
+       mdelay(10);
+       *sp->int_regs &= ~sp->cfg->reset_phy;
+       mdelay(10);
+
+       sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
+       mdelay(10);
+       sp->dma_regs->bus_mode =
+               ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
+
+       /* enable interrupts */
+       sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
+                                                         DMA_STATUS_NIS |
+                                                         DMA_STATUS_RI |
+                                                         DMA_STATUS_TI | DMA_STATUS_FBE);
+       sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring);
+       sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring);
+       sp->dma_regs->control =
+               (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
+
+       sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
+       sp->eth_regs->vlan_tag = (0x8100);
+
+       /* Enable Ethernet Interface */
+       flags = (MAC_CONTROL_TE |       /* transmit enable */
+                        MAC_CONTROL_PM |       /* pass mcast */
+                        MAC_CONTROL_F |        /* full duplex */
+                        MAC_CONTROL_HBD);      /* heart beat disabled */
+
+       if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+               flags |= MAC_CONTROL_PR;
+       }
+       sp->eth_regs->mac_control = flags;
+
+       /* Set all Ethernet station address registers to their initial values */
+       ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
+                         (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
+
+       ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
+                         (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
+                         (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
+                         (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
+
+       sp->eth_regs->mac_addr[0] = ethsah;
+       sp->eth_regs->mac_addr[1] = ethsal;
+
+       mdelay(10);
+
+       return (0);
+}
+
+
+static int ar2313_init(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       int ecode = 0;
+
+       /*
+        * Allocate descriptors
+        */
+       if (ar2313_allocate_descriptors(dev)) {
+               printk("%s: %s: ar2313_allocate_descriptors failed\n",
+                          dev->name, __FUNCTION__);
+               ecode = -EAGAIN;
+               goto init_error;
+       }
+
+       /*
+        * Get the memory for the skb rings.
+        */
+       if (sp->rx_skb == NULL) {
+               sp->rx_skb =
+                       kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+                                       GFP_KERNEL);
+               if (!(sp->rx_skb)) {
+                       printk("%s: %s: rx_skb kmalloc failed\n",
+                                  dev->name, __FUNCTION__);
+                       ecode = -EAGAIN;
+                       goto init_error;
+               }
+       }
+       memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+       if (sp->tx_skb == NULL) {
+               sp->tx_skb =
+                       kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES,
+                                       GFP_KERNEL);
+               if (!(sp->tx_skb)) {
+                       printk("%s: %s: tx_skb kmalloc failed\n",
+                                  dev->name, __FUNCTION__);
+                       ecode = -EAGAIN;
+                       goto init_error;
+               }
+       }
+       memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
+
+       /*
+        * Set tx_csm before we start receiving interrupts, otherwise
+        * the interrupt handler might think it is supposed to process
+        * tx ints before we are up and running, which may cause a null
+        * pointer access in the int handler.
+        */
+       sp->rx_skbprd = 0;
+       sp->cur_rx = 0;
+       sp->tx_prd = 0;
+       sp->tx_csm = 0;
+
+       /*
+        * Zero the stats before starting the interface
+        */
+       memset(&dev->stats, 0, sizeof(dev->stats));
+
+       /*
+        * We load the ring here as there seem to be no way to tell the
+        * firmware to wipe the ring without re-initializing it.
+        */
+       ar2313_load_rx_ring(dev, RX_RING_SIZE);
+
+       /*
+        * Init hardware
+        */
+       ar2313_reset_reg(dev);
+
+       /*
+        * Get the IRQ
+        */
+       ecode =
+               request_irq(dev->irq, &ar2313_interrupt,
+                                       IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+                                       dev->name, dev);
+       if (ecode) {
+               printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
+                          dev->name, __FUNCTION__, dev->irq);
+               goto init_error;
+       }
+
+
+       tasklet_enable(&sp->rx_tasklet);
+
+       return 0;
+
+  init_error:
+       ar2313_init_cleanup(dev);
+       return ecode;
+}
+
+/*
+ * Load the rx ring.
+ *
+ * Loading rings is safe without holding the spin lock since this is
+ * done only before the device is enabled, thus no interrupts are
+ * generated and by the interrupt handler/tasklet handler.
+ */
+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
+{
+
+       struct ar2313_private *sp = netdev_priv(dev);
+       short i, idx;
+
+       idx = sp->rx_skbprd;
+
+       for (i = 0; i < nr_bufs; i++) {
+               struct sk_buff *skb;
+               ar2313_descr_t *rd;
+
+               if (sp->rx_skb[idx]) {
+#if DEBUG_RX
+                       printk(KERN_INFO "ar2313 rx refill full\n");
+#endif                                                 /* DEBUG */
+                       break;
+               }
+               // partha: create additional room for the second GRE fragment
+               skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
+               if (!skb) {
+                       printk("\n\n\n\n %s: No memory in system\n\n\n\n",
+                                  __FUNCTION__);
+                       break;
+               }
+               // partha: create additional room in the front for tx pkt capture
+               skb_reserve(skb, 32);
+
+               /*
+                * Make sure IP header starts on a fresh cache line.
+                */
+               skb->dev = dev;
+               skb_reserve(skb, RX_OFFSET);
+               sp->rx_skb[idx] = skb;
+
+               rd = (ar2313_descr_t *) & sp->rx_ring[idx];
+
+               /* initialize dma descriptor */
+               rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+                                        DMA_RX1_CHAINED);
+               rd->addr = virt_to_phys(skb->data);
+               rd->descr =
+                       virt_to_phys(&sp->
+                                                rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]);
+               rd->status = DMA_RX_OWN;
+
+               idx = DSC_NEXT(idx);
+       }
+
+       if (!i) {
+#if DEBUG_ERR
+               printk(KERN_INFO
+                          "Out of memory when allocating standard receive buffers\n");
+#endif                                                 /* DEBUG */
+       } else {
+               sp->rx_skbprd = idx;
+       }
+
+       return;
+}
+
+#define AR2313_MAX_PKTS_PER_CALL        64
+
+static int ar2313_rx_int(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       struct sk_buff *skb, *skb_new;
+       ar2313_descr_t *rxdesc;
+       unsigned int status;
+       u32 idx;
+       int pkts = 0;
+       int rval;
+
+       idx = sp->cur_rx;
+
+       /* process at most the entire ring and then wait for another interrupt
+        */
+       while (1) {
+
+               rxdesc = &sp->rx_ring[idx];
+               status = rxdesc->status;
+               if (status & DMA_RX_OWN) {
+                       /* SiByte owns descriptor or descr not yet filled in */
+                       rval = 0;
+                       break;
+               }
+
+               if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
+                       rval = 1;
+                       break;
+               }
+#if DEBUG_RX
+               printk("index %d\n", idx);
+               printk("RX status %08x\n", rxdesc->status);
+               printk("RX devcs  %08x\n", rxdesc->devcs);
+               printk("RX addr   %08x\n", rxdesc->addr);
+               printk("RX descr  %08x\n", rxdesc->descr);
+#endif
+
+               if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
+                       (!(status & DMA_RX_LONG))) {
+#if DEBUG_RX
+                       printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
+#endif
+                       dev->stats.rx_errors++;
+                       dev->stats.rx_dropped++;
+
+                       /* add statistics counters */
+                       if (status & DMA_RX_ERR_CRC)
+                               dev->stats.rx_crc_errors++;
+                       if (status & DMA_RX_ERR_COL)
+                               dev->stats.rx_over_errors++;
+                       if (status & DMA_RX_ERR_LENGTH)
+                               dev->stats.rx_length_errors++;
+                       if (status & DMA_RX_ERR_RUNT)
+                               dev->stats.rx_over_errors++;
+                       if (status & DMA_RX_ERR_DESC)
+                               dev->stats.rx_over_errors++;
+
+               } else {
+                       /* alloc new buffer. */
+                       skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+                       if (skb_new != NULL) {
+
+                               skb = sp->rx_skb[idx];
+                               /* set skb */
+                               skb_put(skb,
+                                               ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+
+                               dev->stats.rx_bytes += skb->len;
+                               skb->protocol = eth_type_trans(skb, dev);
+                               /* pass the packet to upper layers */
+                               netif_rx(skb);
+
+                               skb_new->dev = dev;
+                               /* 16 bit align */
+                               skb_reserve(skb_new, RX_OFFSET + 32);
+                               /* reset descriptor's curr_addr */
+                               rxdesc->addr = virt_to_phys(skb_new->data);
+
+                               dev->stats.rx_packets++;
+                               sp->rx_skb[idx] = skb_new;
+                       } else {
+                               dev->stats.rx_dropped++;
+                       }
+               }
+
+               rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
+                                                DMA_RX1_CHAINED);
+               rxdesc->status = DMA_RX_OWN;
+
+               idx = DSC_NEXT(idx);
+       }
+
+       sp->cur_rx = idx;
+
+       return rval;
+}
+
+
+static void ar2313_tx_int(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       u32 idx;
+       struct sk_buff *skb;
+       ar2313_descr_t *txdesc;
+       unsigned int status = 0;
+
+       idx = sp->tx_csm;
+
+       while (idx != sp->tx_prd) {
+
+               txdesc = &sp->tx_ring[idx];
+
+#if DEBUG_TX
+               printk
+                       ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
+                        dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status,
+                        txdesc->devcs, txdesc->addr, txdesc->descr);
+#endif                                                 /* DEBUG */
+
+               if ((status = txdesc->status) & DMA_TX_OWN) {
+                       /* ar2313 dma still owns descr */
+                       break;
+               }
+               /* done with this descriptor */
+               dma_unmap_single(NULL, txdesc->addr,
+                                                txdesc->devcs & DMA_TX1_BSIZE_MASK,
+                                                DMA_TO_DEVICE);
+               txdesc->status = 0;
+
+               if (status & DMA_TX_ERROR) {
+                       dev->stats.tx_errors++;
+                       dev->stats.tx_dropped++;
+                       if (status & DMA_TX_ERR_UNDER)
+                               dev->stats.tx_fifo_errors++;
+                       if (status & DMA_TX_ERR_HB)
+                               dev->stats.tx_heartbeat_errors++;
+                       if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK))
+                               dev->stats.tx_carrier_errors++;
+                       if (status & (DMA_TX_ERR_LATE |
+                                                 DMA_TX_ERR_COL |
+                                                 DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER))
+                               dev->stats.tx_aborted_errors++;
+               } else {
+                       /* transmit OK */
+                       dev->stats.tx_packets++;
+               }
+
+               skb = sp->tx_skb[idx];
+               sp->tx_skb[idx] = NULL;
+               idx = DSC_NEXT(idx);
+               dev->stats.tx_bytes += skb->len;
+               dev_kfree_skb_irq(skb);
+       }
+
+       sp->tx_csm = idx;
+
+       return;
+}
+
+
+static void rx_tasklet_func(unsigned long data)
+{
+       struct net_device *dev = (struct net_device *) data;
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       if (sp->unloading) {
+               return;
+       }
+
+       if (ar2313_rx_int(dev)) {
+               tasklet_hi_schedule(&sp->rx_tasklet);
+       } else {
+               unsigned long flags;
+               spin_lock_irqsave(&sp->lock, flags);
+               sp->dma_regs->intr_ena |= DMA_STATUS_RI;
+               spin_unlock_irqrestore(&sp->lock, flags);
+       }
+}
+
+static void rx_schedule(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+
+       sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
+
+       tasklet_hi_schedule(&sp->rx_tasklet);
+}
+
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
+{
+       struct net_device *dev = (struct net_device *) dev_id;
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned int status, enabled;
+
+       /* clear interrupt */
+       /*
+        * Don't clear RI bit if currently disabled.
+        */
+       status = sp->dma_regs->status;
+       enabled = sp->dma_regs->intr_ena;
+       sp->dma_regs->status = status & enabled;
+
+       if (status & DMA_STATUS_NIS) {
+               /* normal status */
+               /*
+                * Don't schedule rx processing if interrupt
+                * is already disabled.
+                */
+               if (status & enabled & DMA_STATUS_RI) {
+                       /* receive interrupt */
+                       rx_schedule(dev);
+               }
+               if (status & DMA_STATUS_TI) {
+                       /* transmit interrupt */
+                       ar2313_tx_int(dev);
+               }
+       }
+
+       if (status & DMA_STATUS_AIS) {
+#if DEBUG_INT
+               printk("%s: AIS set %08x & %x\n", __FUNCTION__,
+                          status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
+#endif
+               /* abnormal status */
+               if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
+                       ar2313_restart(dev);
+               }
+       }
+       return IRQ_HANDLED;
+}
+
+
+static int ar2313_open(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned int ethsal, ethsah;
+
+       /* reset the hardware, in case the MAC address changed */
+       ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) |
+                         (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF));
+
+       ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) |
+                         (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) |
+                         (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) |
+                         (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF));
+
+       sp->eth_regs->mac_addr[0] = ethsah;
+       sp->eth_regs->mac_addr[1] = ethsal;
+
+       mdelay(10);
+
+       dev->mtu = 1500;
+       netif_start_queue(dev);
+
+       sp->eth_regs->mac_control |= MAC_CONTROL_RE;
+
+       return 0;
+}
+
+static void ar2313_halt(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       int j;
+
+       tasklet_disable(&sp->rx_tasklet);
+
+       /* kill the MAC */
+       sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
+                                                                  MAC_CONTROL_TE);     /* disable Transmits */
+       /* stop dma */
+       sp->dma_regs->control = 0;
+       sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
+
+       /* place phy and MAC in reset */
+       *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy);
+
+       /* free buffers on tx ring */
+       for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
+               struct sk_buff *skb;
+               ar2313_descr_t *txdesc;
+
+               txdesc = &sp->tx_ring[j];
+               txdesc->descr = 0;
+
+               skb = sp->tx_skb[j];
+               if (skb) {
+                       dev_kfree_skb(skb);
+                       sp->tx_skb[j] = NULL;
+               }
+       }
+}
+
+/*
+ * close should do nothing. Here's why. It's called when
+ * 'ifconfig bond0 down' is run. If it calls free_irq then
+ * the irq is gone forever ! When bond0 is made 'up' again,
+ * the ar2313_open () does not call request_irq (). Worse,
+ * the call to ar2313_halt() generates a WDOG reset due to
+ * the write to 'sp->int_regs' and the box reboots.
+ * Commenting this out is good since it allows the
+ * system to resume when bond0 is made up again.
+ */
+static int ar2313_close(struct net_device *dev)
+{
+#if 0
+       /*
+        * Disable interrupts
+        */
+       disable_irq(dev->irq);
+
+       /*
+        * Without (or before) releasing irq and stopping hardware, this
+        * is an absolute non-sense, by the way. It will be reset instantly
+        * by the first irq.
+        */
+       netif_stop_queue(dev);
+
+       /* stop the MAC and DMA engines */
+       ar2313_halt(dev);
+
+       /* release the interrupt */
+       free_irq(dev->irq, dev);
+
+#endif
+       return 0;
+}
+
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       ar2313_descr_t *td;
+       u32 idx;
+
+       idx = sp->tx_prd;
+       td = &sp->tx_ring[idx];
+
+       if (td->status & DMA_TX_OWN) {
+#if DEBUG_TX
+               printk("%s: No space left to Tx\n", __FUNCTION__);
+#endif
+               /* free skbuf and lie to the caller that we sent it out */
+               dev->stats.tx_dropped++;
+               dev_kfree_skb(skb);
+
+               /* restart transmitter in case locked */
+               sp->dma_regs->xmt_poll = 0;
+               return 0;
+       }
+
+       /* Setup the transmit descriptor. */
+       td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
+                                (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED));
+       td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
+       td->status = DMA_TX_OWN;
+
+       /* kick transmitter last */
+       sp->dma_regs->xmt_poll = 0;
+
+#if DEBUG_TX
+       printk("index %d\n", idx);
+       printk("TX status %08x\n", td->status);
+       printk("TX devcs  %08x\n", td->devcs);
+       printk("TX addr   %08x\n", td->addr);
+       printk("TX descr  %08x\n", td->descr);
+#endif
+
+       sp->tx_skb[idx] = skb;
+       idx = DSC_NEXT(idx);
+       sp->tx_prd = idx;
+
+       return 0;
+}
+
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+       struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
+       struct ar2313_private *sp = netdev_priv(dev);
+       int ret;
+
+       switch (cmd) {
+
+       case SIOCETHTOOL:
+               spin_lock_irq(&sp->lock);
+               ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data);
+               spin_unlock_irq(&sp->lock);
+               return ret;
+
+       case SIOCSIFHWADDR:
+               if (copy_from_user
+                       (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+                       return -EFAULT;
+               return 0;
+
+       case SIOCGIFHWADDR:
+               if (copy_to_user
+                       (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+                       return -EFAULT;
+               return 0;
+
+       case SIOCGMIIPHY:
+       case SIOCGMIIREG:
+       case SIOCSMIIREG:
+               return phy_mii_ioctl(sp->phy_dev, data, cmd);
+
+       default:
+               break;
+       }
+
+       return -EOPNOTSUPP;
+}
+
+static void ar2313_adjust_link(struct net_device *dev)
+{
+       struct ar2313_private *sp = netdev_priv(dev);
+       unsigned int mc;
+
+       if (!sp->phy_dev->link)
+               return;
+
+       if (sp->phy_dev->duplex != sp->oldduplex) {
+               mc = readl(&sp->eth_regs->mac_control);
+               mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO);
+               if (sp->phy_dev->duplex)
+                       mc |= MAC_CONTROL_F;
+               else
+                       mc |= MAC_CONTROL_DRO;
+               writel(mc, &sp->eth_regs->mac_control);
+               sp->oldduplex = sp->phy_dev->duplex;
+       }
+}
+
+#define MII_ADDR(phy, reg) \
+       ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+
+static int
+mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+{
+       struct net_device *const dev = bus->priv;
+       struct ar2313_private *sp = netdev_priv(dev);
+       volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+       ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
+       while (ethernet->mii_addr & MII_ADDR_BUSY);
+       return (ethernet->mii_data >> MII_DATA_SHIFT);
+}
+
+static int
+mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+             u16 value)
+{
+       struct net_device *const dev = bus->priv;
+       struct ar2313_private *sp = netdev_priv(dev);
+       volatile ETHERNET_STRUCT *ethernet = sp->phy_regs;
+
+       while (ethernet->mii_addr & MII_ADDR_BUSY);
+       ethernet->mii_data = value << MII_DATA_SHIFT;
+       ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE;
+
+       return 0;
+}
+
+static int mdiobus_reset(struct mii_bus *bus)
+{
+       struct net_device *const dev = bus->priv;
+
+       ar2313_reset_reg(dev);
+
+       return 0;
+}
+
+static int mdiobus_probe (struct net_device *dev)
+{
+       struct ar2313_private *const sp = netdev_priv(dev);
+       struct phy_device *phydev = NULL;
+       int phy_addr;
+
+       /* find the first (lowest address) PHY on the current MAC's MII bus */
+       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+               if (sp->mii_bus.phy_map[phy_addr]) {
+                       phydev = sp->mii_bus.phy_map[phy_addr];
+                       break; /* break out with first one found */
+               }
+
+       if (!phydev) {
+               printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name);
+               return -1;
+       }
+
+       /* now we are supposed to have a proper phydev, to attach to... */
+       BUG_ON(!phydev);
+       BUG_ON(phydev->attached_dev);
+
+       phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0,
+               PHY_INTERFACE_MODE_MII);
+
+       if (IS_ERR(phydev)) {
+               printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+               return PTR_ERR(phydev);
+       }
+
+       /* mask with MAC supported features */
+       phydev->supported &= (SUPPORTED_10baseT_Half
+               | SUPPORTED_10baseT_Full
+               | SUPPORTED_100baseT_Half
+               | SUPPORTED_100baseT_Full
+               | SUPPORTED_Autoneg
+               /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */
+               | SUPPORTED_MII
+               | SUPPORTED_TP);
+
+       phydev->advertising = phydev->supported;
+
+       sp->oldduplex = -1;
+       sp->phy_dev = phydev;
+
+       printk(KERN_INFO "%s: attached PHY driver [%s] "
+               "(mii_bus:phy_addr=%s)\n",
+               dev->name, phydev->drv->name, phydev->dev.bus_id);
+
+       return 0;
+}
+
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h
new file mode 100644 (file)
index 0000000..9fa49ca
--- /dev/null
@@ -0,0 +1,195 @@
+#ifndef _AR2313_H_
+#define _AR2313_H_
+
+#include <linux/autoconf.h>
+#include <asm/bootinfo.h>
+#include <ar531x_platform.h>
+
+/*
+ * probe link timer - 5 secs
+ */
+#define LINK_TIMER    (5*HZ)
+
+#define IS_DMA_TX_INT(X)   (((X) & (DMA_STATUS_TI)) != 0)
+#define IS_DMA_RX_INT(X)   (((X) & (DMA_STATUS_RI)) != 0)
+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN))    == 0)
+
+#define AR2313_TX_TIMEOUT (HZ/4)
+
+/*
+ * Rings
+ */
+#define DSC_RING_ENTRIES_SIZE  (AR2313_DESCR_ENTRIES * sizeof(struct desc))
+#define DSC_NEXT(idx)          ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
+
+static inline int tx_space(u32 csm, u32 prd)
+{
+       return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
+}
+
+#if MAX_SKB_FRAGS
+#define TX_RESERVED    (MAX_SKB_FRAGS+1)       /* +1 for message header */
+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
+#else
+#define tx_ring_full           0
+#endif
+
+#define AR2313_MBGET           2
+#define AR2313_MBSET           3
+#define AR2313_PCI_RECONFIG    4
+#define AR2313_PCI_DUMP        5
+#define AR2313_TEST_PANIC      6
+#define AR2313_TEST_NULLPTR    7
+#define AR2313_READ_DATA       8
+#define AR2313_WRITE_DATA      9
+#define AR2313_GET_VERSION     10
+#define AR2313_TEST_HANG       11
+#define AR2313_SYNC            12
+
+
+//
+// New Combo structure for Both Eth0 AND eth1
+//
+typedef struct {
+       volatile unsigned int mac_control;      /* 0x00 */
+       volatile unsigned int mac_addr[2];      /* 0x04 - 0x08 */
+       volatile unsigned int mcast_table[2];   /* 0x0c - 0x10 */
+       volatile unsigned int mii_addr; /* 0x14 */
+       volatile unsigned int mii_data; /* 0x18 */
+       volatile unsigned int flow_control;     /* 0x1c */
+       volatile unsigned int vlan_tag; /* 0x20 */
+       volatile unsigned int pad[7];   /* 0x24 - 0x3c */
+       volatile unsigned int ucast_table[8];   /* 0x40-0x5c */
+
+} ETHERNET_STRUCT;
+
+/********************************************************************
+ * Interrupt controller
+ ********************************************************************/
+
+typedef struct {
+       volatile unsigned int wdog_control;     /* 0x08 */
+       volatile unsigned int wdog_timer;       /* 0x0c */
+       volatile unsigned int misc_status;      /* 0x10 */
+       volatile unsigned int misc_mask;        /* 0x14 */
+       volatile unsigned int global_status;    /* 0x18 */
+       volatile unsigned int reserved; /* 0x1c */
+       volatile unsigned int reset_control;    /* 0x20 */
+} INTERRUPT;
+
+/********************************************************************
+ * DMA controller
+ ********************************************************************/
+typedef struct {
+       volatile unsigned int bus_mode; /* 0x00 (CSR0) */
+       volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
+       volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
+       volatile unsigned int rcv_base; /* 0x0c (CSR3) */
+       volatile unsigned int xmt_base; /* 0x10 (CSR4) */
+       volatile unsigned int status;   /* 0x14 (CSR5) */
+       volatile unsigned int control;  /* 0x18 (CSR6) */
+       volatile unsigned int intr_ena; /* 0x1c (CSR7) */
+       volatile unsigned int rcv_missed;       /* 0x20 (CSR8) */
+       volatile unsigned int reserved[11];     /* 0x24-0x4c (CSR9-19) */
+       volatile unsigned int cur_tx_buf_addr;  /* 0x50 (CSR20) */
+       volatile unsigned int cur_rx_buf_addr;  /* 0x50 (CSR21) */
+} DMA;
+
+/*
+ * Struct private for the Sibyte.
+ *
+ * Elements are grouped so variables used by the tx handling goes
+ * together, and will go into the same cache lines etc. in order to
+ * avoid cache line contention between the rx and tx handling on SMP.
+ *
+ * Frequently accessed variables are put at the beginning of the
+ * struct to help the compiler generate better/shorter code.
+ */
+struct ar2313_private {
+       struct net_device *dev;
+       int version;
+       u32 mb[2];
+
+       volatile ETHERNET_STRUCT *phy_regs;
+       volatile ETHERNET_STRUCT *eth_regs;
+       volatile DMA *dma_regs;
+       volatile u32 *int_regs;
+       struct ar531x_eth *cfg;
+
+       spinlock_t lock;                        /* Serialise access to device */
+
+       /*
+        * RX and TX descriptors, must be adjacent
+        */
+       ar2313_descr_t *rx_ring;
+       ar2313_descr_t *tx_ring;
+
+
+       struct sk_buff **rx_skb;
+       struct sk_buff **tx_skb;
+
+       /*
+        * RX elements
+        */
+       u32 rx_skbprd;
+       u32 cur_rx;
+
+       /*
+        * TX elements
+        */
+       u32 tx_prd;
+       u32 tx_csm;
+
+       /*
+        * Misc elements
+        */
+       int board_idx;
+       char name[48];
+       struct {
+               u32 address;
+               u32 length;
+               char *mapping;
+       } desc;
+
+
+       struct timer_list link_timer;
+       unsigned short phy;                     /* merlot phy = 1, samsung phy = 0x1f */
+       unsigned short mac;
+       unsigned short link;            /* 0 - link down, 1 - link up */
+       u16 phyData;
+
+       struct tasklet_struct rx_tasklet;
+       int unloading;
+
+       struct phy_device *phy_dev;
+       struct mii_bus mii_bus;
+       int oldduplex;
+};
+
+
+/*
+ * Prototypes
+ */
+static int ar2313_init(struct net_device *dev);
+#ifdef TX_TIMEOUT
+static void ar2313_tx_timeout(struct net_device *dev);
+#endif
+#if 0
+static void ar2313_multicast_list(struct net_device *dev);
+#endif
+static int ar2313_restart(struct net_device *dev);
+#if DEBUG
+static void ar2313_dump_regs(struct net_device *dev);
+#endif
+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
+static int ar2313_open(struct net_device *dev);
+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int ar2313_close(struct net_device *dev);
+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr,
+                                               int cmd);
+static void ar2313_init_cleanup(struct net_device *dev);
+static int ar2313_setup_timer(struct net_device *dev);
+static void ar2313_link_timer_fn(unsigned long data);
+static void ar2313_check_link(struct net_device *dev);
+#endif                                                 /* _AR2313_H_ */
diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h
new file mode 100644 (file)
index 0000000..6d478d2
--- /dev/null
@@ -0,0 +1,142 @@
+#ifndef __ARUBA_DMA_H__
+#define __ARUBA_DMA_H__
+
+/*******************************************************************************
+ *
+ * Copyright 2002 Integrated Device Technology, Inc.
+ *             All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * File   : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date   : 20011005
+ * Update :
+ *         $Log: dma.h,v $
+ *         Revision 1.3  2002/06/06 18:34:03  astichte
+ *         Added XXX_PhysicalAddress and XXX_VirtualAddress
+ *
+ *         Revision 1.2  2002/06/05 18:30:46  astichte
+ *         Removed IDTField
+ *
+ *         Revision 1.1  2002/05/29 17:33:21  sysarch
+ *         jba File moved from vcode/include/idt/acacia
+ *
+ *
+ ******************************************************************************/
+
+#define AR_BIT(x)            (1 << (x))
+#define DMA_RX_ERR_CRC       AR_BIT(1)
+#define DMA_RX_ERR_DRIB      AR_BIT(2)
+#define DMA_RX_ERR_MII       AR_BIT(3)
+#define DMA_RX_EV2           AR_BIT(5)
+#define DMA_RX_ERR_COL       AR_BIT(6)
+#define DMA_RX_LONG          AR_BIT(7)
+#define DMA_RX_LS            AR_BIT(8) /* last descriptor */
+#define DMA_RX_FS            AR_BIT(9) /* first descriptor */
+#define DMA_RX_MF            AR_BIT(10)        /* multicast frame */
+#define DMA_RX_ERR_RUNT      AR_BIT(11)        /* runt frame */
+#define DMA_RX_ERR_LENGTH    AR_BIT(12)        /* length error */
+#define DMA_RX_ERR_DESC      AR_BIT(14)        /* descriptor error */
+#define DMA_RX_ERROR         AR_BIT(15)        /* error summary */
+#define DMA_RX_LEN_MASK      0x3fff0000
+#define DMA_RX_LEN_SHIFT     16
+#define DMA_RX_FILT          AR_BIT(30)
+#define DMA_RX_OWN           AR_BIT(31)        /* desc owned by DMA controller */
+
+#define DMA_RX1_BSIZE_MASK   0x000007ff
+#define DMA_RX1_BSIZE_SHIFT  0
+#define DMA_RX1_CHAINED      AR_BIT(24)
+#define DMA_RX1_RER          AR_BIT(25)
+
+#define DMA_TX_ERR_UNDER     AR_BIT(1) /* underflow error */
+#define DMA_TX_ERR_DEFER     AR_BIT(2) /* excessive deferral */
+#define DMA_TX_COL_MASK      0x78
+#define DMA_TX_COL_SHIFT     3
+#define DMA_TX_ERR_HB        AR_BIT(7) /* hearbeat failure */
+#define DMA_TX_ERR_COL       AR_BIT(8) /* excessive collisions */
+#define DMA_TX_ERR_LATE      AR_BIT(9) /* late collision */
+#define DMA_TX_ERR_LINK      AR_BIT(10)        /* no carrier */
+#define DMA_TX_ERR_LOSS      AR_BIT(11)        /* loss of carrier */
+#define DMA_TX_ERR_JABBER    AR_BIT(14)        /* transmit jabber timeout */
+#define DMA_TX_ERROR         AR_BIT(15)        /* frame aborted */
+#define DMA_TX_OWN           AR_BIT(31)        /* descr owned by DMA controller */
+
+#define DMA_TX1_BSIZE_MASK   0x000007ff
+#define DMA_TX1_BSIZE_SHIFT  0
+#define DMA_TX1_CHAINED      AR_BIT(24)        /* chained descriptors */
+#define DMA_TX1_TER          AR_BIT(25)        /* transmit end of ring */
+#define DMA_TX1_FS           AR_BIT(29)        /* first segment */
+#define DMA_TX1_LS           AR_BIT(30)        /* last segment */
+#define DMA_TX1_IC           AR_BIT(31)        /* interrupt on completion */
+
+#define RCVPKT_LENGTH(X)     (X  >> 16)        /* Received pkt Length */
+
+#define MAC_CONTROL_RE       AR_BIT(2) /* receive enable */
+#define MAC_CONTROL_TE       AR_BIT(3) /* transmit enable */
+#define MAC_CONTROL_DC       AR_BIT(5) /* Deferral check */
+#define MAC_CONTROL_ASTP     AR_BIT(8) /* Auto pad strip */
+#define MAC_CONTROL_DRTY     AR_BIT(10)        /* Disable retry */
+#define MAC_CONTROL_DBF      AR_BIT(11)        /* Disable bcast frames */
+#define MAC_CONTROL_LCC      AR_BIT(12)        /* late collision ctrl */
+#define MAC_CONTROL_HP       AR_BIT(13)        /* Hash Perfect filtering */
+#define MAC_CONTROL_HASH     AR_BIT(14)        /* Unicast hash filtering */
+#define MAC_CONTROL_HO       AR_BIT(15)        /* Hash only filtering */
+#define MAC_CONTROL_PB       AR_BIT(16)        /* Pass Bad frames */
+#define MAC_CONTROL_IF       AR_BIT(17)        /* Inverse filtering */
+#define MAC_CONTROL_PR       AR_BIT(18)        /* promiscuous mode (valid frames
+                                                                                  only) */
+#define MAC_CONTROL_PM       AR_BIT(19)        /* pass multicast */
+#define MAC_CONTROL_F        AR_BIT(20)        /* full-duplex */
+#define MAC_CONTROL_DRO      AR_BIT(23)        /* Disable Receive Own */
+#define MAC_CONTROL_HBD      AR_BIT(28)        /* heart-beat disabled (MUST BE
+                                                                                  SET) */
+#define MAC_CONTROL_BLE      AR_BIT(30)        /* big endian mode */
+#define MAC_CONTROL_RA       AR_BIT(31)        /* receive all (valid and invalid
+                                                                                  frames) */
+
+#define MII_ADDR_BUSY        AR_BIT(0)
+#define MII_ADDR_WRITE       AR_BIT(1)
+#define MII_ADDR_REG_SHIFT   6
+#define MII_ADDR_PHY_SHIFT   11
+#define MII_DATA_SHIFT       0
+
+#define FLOW_CONTROL_FCE     AR_BIT(1)
+
+#define DMA_BUS_MODE_SWR       AR_BIT(0)       /* software reset */
+#define DMA_BUS_MODE_BLE       AR_BIT(7)       /* big endian mode */
+#define DMA_BUS_MODE_PBL_SHIFT 8       /* programmable burst length 32 */
+#define DMA_BUS_MODE_DBO       AR_BIT(20)      /* big-endian descriptors */
+
+#define DMA_STATUS_TI        AR_BIT(0) /* transmit interrupt */
+#define DMA_STATUS_TPS       AR_BIT(1) /* transmit process stopped */
+#define DMA_STATUS_TU        AR_BIT(2) /* transmit buffer unavailable */
+#define DMA_STATUS_TJT       AR_BIT(3) /* transmit buffer timeout */
+#define DMA_STATUS_UNF       AR_BIT(5) /* transmit underflow */
+#define DMA_STATUS_RI        AR_BIT(6) /* receive interrupt */
+#define DMA_STATUS_RU        AR_BIT(7) /* receive buffer unavailable */
+#define DMA_STATUS_RPS       AR_BIT(8) /* receive process stopped */
+#define DMA_STATUS_ETI       AR_BIT(10)        /* early transmit interrupt */
+#define DMA_STATUS_FBE       AR_BIT(13)        /* fatal bus interrupt */
+#define DMA_STATUS_ERI       AR_BIT(14)        /* early receive interrupt */
+#define DMA_STATUS_AIS       AR_BIT(15)        /* abnormal interrupt summary */
+#define DMA_STATUS_NIS       AR_BIT(16)        /* normal interrupt summary */
+#define DMA_STATUS_RS_SHIFT  17        /* receive process state */
+#define DMA_STATUS_TS_SHIFT  20        /* transmit process state */
+#define DMA_STATUS_EB_SHIFT  23        /* error bits */
+
+#define DMA_CONTROL_SR       AR_BIT(1) /* start receive */
+#define DMA_CONTROL_ST       AR_BIT(13)        /* start transmit */
+#define DMA_CONTROL_SF       AR_BIT(21)        /* store and forward */
+
+
+typedef struct {
+       volatile unsigned int status;   // OWN, Device control and status.
+       volatile unsigned int devcs;    // pkt Control bits + Length
+       volatile unsigned int addr;     // Current Address.
+       volatile unsigned int descr;    // Next descriptor in chain.
+} ar2313_descr_t;
+
+
+#endif                                                 // __ARUBA_DMA_H__
diff --git a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c b/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c
new file mode 100644 (file)
index 0000000..d71b6f6
--- /dev/null
@@ -0,0 +1,198 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org>
+ * Based on EP93xx and ifxmips wdt driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <ar531x.h>
+
+#define CLOCK_RATE 40000000
+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x)
+
+static int wdt_timeout = 20;
+static int started = 0;
+static int in_use = 0;
+
+static void
+ar2315_wdt_enable(void)
+{
+       sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE);
+       sysRegWrite(AR5315_ISR, 0x80);
+}
+
+static ssize_t
+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+{
+       if(len)
+               ar2315_wdt_enable();
+       return len;
+}
+
+static int
+ar2315_wdt_open(struct inode *inode, struct file *file)
+{
+       if(in_use)
+               return -EBUSY;
+       ar2315_wdt_enable();
+       in_use = started = 1;
+       return nonseekable_open(inode, file);
+}
+
+static int
+ar2315_wdt_release(struct inode *inode, struct file *file)
+{
+       in_use = 0;
+       return 0;
+}
+
+static irqreturn_t
+ar2315_wdt_interrupt(int irq, void *dev_id)
+{
+       if(started)
+       {
+               printk(KERN_CRIT "watchdog expired, rebooting system\n");
+               emergency_restart();
+       } else {
+               sysRegWrite(AR5315_WDC, 0);
+               sysRegWrite(AR5315_WD, 0);
+               sysRegWrite(AR5315_ISR, 0x80);
+       }
+       return IRQ_HANDLED;
+}
+
+static struct watchdog_info ident = {
+       .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+       .identity = "ar2315 Watchdog",
+};
+
+static int
+ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+       int new_wdt_timeout;
+       int ret = -ENOIOCTLCMD;
+
+       switch(cmd)
+       {
+               case WDIOC_GETSUPPORT:
+                       ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
+                       break;
+
+               case WDIOC_KEEPALIVE:
+                       ar2315_wdt_enable();
+                       ret = 0;
+                       break;
+
+               case WDIOC_SETTIMEOUT:
+                       if((ret = get_user(new_wdt_timeout, (int __user *)arg)))
+                               break;
+                       wdt_timeout = HEARTBEAT(new_wdt_timeout);
+                       ar2315_wdt_enable();
+                       break;
+
+               case WDIOC_GETTIMEOUT:
+                       ret = put_user(wdt_timeout, (int __user *)arg);
+                       break;
+       }
+       return ret;
+}
+
+static struct file_operations ar2315_wdt_fops = {
+       .owner          = THIS_MODULE,
+       .llseek         = no_llseek,
+       .write          = ar2315_wdt_write,
+       .ioctl          = ar2315_wdt_ioctl,
+       .open           = ar2315_wdt_open,
+       .release        = ar2315_wdt_release,
+};
+
+static struct miscdevice ar2315_wdt_miscdev = {
+       .minor  = WATCHDOG_MINOR,
+       .name   = "watchdog",
+       .fops   = &ar2315_wdt_fops,
+};
+
+static int
+ar2315_wdt_probe(struct platform_device *dev)
+{
+       int ret = 0;
+
+       ar2315_wdt_enable();
+       ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL);
+       if(ret)
+       {
+               printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n");
+               goto out;
+       }
+
+       ret = misc_register(&ar2315_wdt_miscdev);
+       if(ret)
+               printk(KERN_ERR "ar2315wdt: failed to register miscdev\n");
+
+out:
+       return ret;
+}
+
+static int
+ar2315_wdt_remove(struct platform_device *dev)
+{
+       misc_deregister(&ar2315_wdt_miscdev);
+       free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL);
+       return 0;
+}
+
+static struct platform_driver ar2315_wdt_driver = {
+       .probe = ar2315_wdt_probe,
+       .remove = ar2315_wdt_remove,
+       .driver = {
+               .name = "ar2315_wdt",
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init
+init_ar2315_wdt(void)
+{
+       int ret = platform_driver_register(&ar2315_wdt_driver);
+       if(ret)
+               printk(KERN_INFO "ar2315_wdt: error registering platfom driver!");
+       return ret;
+}
+
+static void __exit
+exit_ar2315_wdt(void)
+{
+       platform_driver_unregister(&ar2315_wdt_driver);
+}
+
+module_init(init_ar2315_wdt);
+module_exit(exit_ar2315_wdt);
diff --git a/target/linux/atheros/patches-2.6.28/100-board.patch b/target/linux/atheros/patches-2.6.28/100-board.patch
new file mode 100644 (file)
index 0000000..c7f3745
--- /dev/null
@@ -0,0 +1,66 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -60,6 +60,18 @@ config BCM47XX
+       help
+        Support for BCM47XX based boards
++config ATHEROS
++      bool "Atheros SoC support (EXPERIMENTAL)"
++      depends on EXPERIMENTAL
++      select DMA_NONCOHERENT
++      select CEVT_R4K
++      select CSRC_R4K
++      select IRQ_CPU
++      select SYS_HAS_CPU_MIPS32_R1
++      select SYS_SUPPORTS_BIG_ENDIAN
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select GENERIC_GPIO
++
+ config MIPS_COBALT
+       bool "Cobalt Server"
+       select CEVT_R4K
+@@ -597,6 +609,7 @@ config WR_PPMC
+ endchoice
++source "arch/mips/atheros/Kconfig"
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/emma/Kconfig"
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -278,6 +278,13 @@ libs-$(CONFIG_MIPS_XXS1500)       += arch/mips
+ load-$(CONFIG_MIPS_XXS1500)   += 0xffffffff80100000
+ #
++# Atheros AR5312/AR2312 WiSoC
++#
++core-$(CONFIG_ATHEROS)                += arch/mips/atheros/
++cflags-$(CONFIG_ATHEROS)      += -I$(srctree)/arch/mips/include/asm/mach-atheros
++load-$(CONFIG_ATHEROS)                += 0xffffffff80041000
++
++#
+ # Cobalt Server
+ #
+ core-$(CONFIG_MIPS_COBALT)    += arch/mips/cobalt/
+--- a/arch/mips/include/asm/bootinfo.h
++++ b/arch/mips/include/asm/bootinfo.h
+@@ -57,6 +57,18 @@
+ #define       MACH_MIKROTIK_RB532     0       /* Mikrotik RouterBoard 532     */
+ #define MACH_MIKROTIK_RB532A  1       /* Mikrotik RouterBoard 532A    */
++/*
++ * Valid machtype for group ATHEROS
++ */
++#define MACH_GROUP_ATHEROS    26
++#define MACH_ATHEROS_AR5312   0
++#define MACH_ATHEROS_AR2312   1
++#define MACH_ATHEROS_AR2313   2
++#define MACH_ATHEROS_AR2315   3
++#define MACH_ATHEROS_AR2316   4
++#define MACH_ATHEROS_AR2317   5
++#define MACH_ATHEROS_AR2318   6
++
+ #define CL_SIZE                       COMMAND_LINE_SIZE
+ extern char *system_type;
diff --git a/target/linux/atheros/patches-2.6.28/110-spiflash.patch b/target/linux/atheros/patches-2.6.28/110-spiflash.patch
new file mode 100644 (file)
index 0000000..4b9b9d6
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
+@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ
+       help
+         This option enables FAST_READ access supported by ST M25Pxx.
++config MTD_SPIFLASH
++      tristate "Atheros AR2315/6/7 SPI Flash support"
++      depends on ATHEROS_AR5315
++
+ config MTD_SLRAM
+       tristate "Uncached system RAM"
+       help
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
+@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)               += lart.o
+ obj-$(CONFIG_MTD_BLOCK2MTD)   += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH)   += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80)      += m25p80.o
++obj-$(CONFIG_MTD_SPIFLASH)    += spiflash.o
diff --git a/target/linux/atheros/patches-2.6.28/120-watchdog.patch b/target/linux/atheros/patches-2.6.28/120-watchdog.patch
new file mode 100644 (file)
index 0000000..88c42a2
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -747,6 +747,12 @@ config TXX9_WDT
+       help
+         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
++config ATHEROS_WDT
++      tristate "Atheros wisoc Watchdog Timer"
++      depends on ATHEROS
++      help
++        Hardware driver for the Atheros wisoc Watchdog Timer.
++
+ # PARISC Architecture
+ # POWERPC Architecture
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o
+ # PARISC Architecture
diff --git a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch
new file mode 100644 (file)
index 0000000..5c183a4
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -359,6 +359,12 @@ config AX88796_93CX6
+       help
+         Select this if your platform comes with an external 93CX6 eeprom.
++config AR2313
++      tristate "AR2313 Ethernet support"
++      depends on NET_ETHERNET && ATHEROS
++      help
++        Support for the AR231x/531x ethernet controller
++
+ config MACE
+       tristate "MACE (Power Mac ethernet) support"
+       depends on PPC_PMAC && PPC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+ obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
++obj-$(CONFIG_AR2313) += ar2313/
+ obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
+ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
+ obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch b/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch
new file mode 100644 (file)
index 0000000..a39b46c
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_
+       sp->mii_bus.write = mdiobus_write;
+       sp->mii_bus.reset = mdiobus_reset;
+       sp->mii_bus.name = "ar2313_eth_mii";
+-      sp->mii_bus.id = 0;
++      snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
+       sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+       *sp->mii_bus.irq = PHY_POLL;
diff --git a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch b/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch
new file mode 100644 (file)
index 0000000..0f4d732
--- /dev/null
@@ -0,0 +1,144 @@
+This patch reflects changes in mdiobus implementation in kernel 2.6.28.
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon
+ static void rx_tasklet_cleanup(struct net_device *dev);
+ static void ar2313_multicast_list(struct net_device *dev);
+-static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
+-static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
+-static int mdiobus_reset(struct mii_bus *bus);
+-static int mdiobus_probe (struct net_device *dev);
++static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum);
++static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value);
++static int ar2313_mdiobus_reset(struct mii_bus *bus);
++static int ar2313_mdiobus_probe (struct net_device *dev);
+ static void ar2313_adjust_link(struct net_device *dev);
+ #ifndef ERR
+@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_
+                  dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+                  dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+-      sp->mii_bus.priv = dev;
+-      sp->mii_bus.read = mdiobus_read;
+-      sp->mii_bus.write = mdiobus_write;
+-      sp->mii_bus.reset = mdiobus_reset;
+-      sp->mii_bus.name = "ar2313_eth_mii";
+-      snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0");
+-      sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
+-      *sp->mii_bus.irq = PHY_POLL;
++      sp->mii_bus = mdiobus_alloc();
++      if (sp->mii_bus == NULL)
++              return -1;
++
++      sp->mii_bus->priv = dev;
++      sp->mii_bus->read = ar2313_mdiobus_read;
++      sp->mii_bus->write = ar2313_mdiobus_write;
++      sp->mii_bus->reset = ar2313_mdiobus_reset;
++      sp->mii_bus->name = "ar2313_eth_mii";
++      snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
++      sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
++      *sp->mii_bus->irq = PHY_POLL;
+-      mdiobus_register(&sp->mii_bus);
++      mdiobus_register(sp->mii_bus);
+-      if (mdiobus_probe(dev) != 0) {
++      if (ar2313_mdiobus_probe(dev) != 0) {
+               printk(KERN_ERR "ar2313: mdiobus_probe failed");
+               rx_tasklet_cleanup(dev);
+               ar2313_init_cleanup(dev);
+@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne
+ static int __exit ar2313_remove(struct platform_device *pdev)
+ {
+       struct net_device *dev = platform_get_drvdata(pdev);
++      struct ar2313_private *sp = netdev_priv(dev);
+       rx_tasklet_cleanup(dev);
+       ar2313_init_cleanup(dev);
+       unregister_netdev(dev);
++      mdiobus_unregister(sp->mii_bus);
++      mdiobus_free(sp->mii_bus);
+       kfree(dev);
+       return 0;
+ }
+@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net
+       struct ar2313_private *sp = netdev_priv(dev);
+       u16 phyData;
+-      phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR);
++      phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR);
+       if (sp->phyData != phyData) {
+               if (phyData & BMSR_LSTATUS) {
+                       /* link is present, ready link partner ability to deterine
+@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net
+                       u16 reg;
+                       sp->link = 1;
+-                      reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR);
++                      reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR);
+                       if (reg & BMCR_ANENABLE) {
+                               /* auto neg enabled */
+-                              reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA);
++                              reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA);
+                               duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0;
+                       } else {
+                               /* no auto neg, just read duplex config */
+@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne
+       ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
+ static int
+-mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
++ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
+ {
+       struct net_device *const dev = bus->priv;
+       struct ar2313_private *sp = netdev_priv(dev);
+@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph
+ }
+ static int
+-mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
++ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
+              u16 value)
+ {
+       struct net_device *const dev = bus->priv;
+@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p
+       return 0;
+ }
+-static int mdiobus_reset(struct mii_bus *bus)
++static int ar2313_mdiobus_reset(struct mii_bus *bus)
+ {
+       struct net_device *const dev = bus->priv;
+@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus 
+       return 0;
+ }
+-static int mdiobus_probe (struct net_device *dev)
++static int ar2313_mdiobus_probe (struct net_device *dev)
+ {
+       struct ar2313_private *const sp = netdev_priv(dev);
+       struct phy_device *phydev = NULL;
+@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev
+       /* find the first (lowest address) PHY on the current MAC's MII bus */
+       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+-              if (sp->mii_bus.phy_map[phy_addr]) {
+-                      phydev = sp->mii_bus.phy_map[phy_addr];
++              if (sp->mii_bus->phy_map[phy_addr]) {
++                      phydev = sp->mii_bus->phy_map[phy_addr];
+                       break; /* break out with first one found */
+               }
+--- a/drivers/net/ar2313/ar2313.h
++++ b/drivers/net/ar2313/ar2313.h
+@@ -162,7 +162,7 @@ struct ar2313_private {
+       int unloading;
+       struct phy_device *phy_dev;
+-      struct mii_bus mii_bus;
++      struct mii_bus *mii_bus;
+       int oldduplex;
+ };
diff --git a/target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch b/target/linux/atheros/patches-2.6.28/140-redboot_partition_scan.patch
new file mode 100644 (file)
index 0000000..289d4eb
--- /dev/null
@@ -0,0 +1,54 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
+       static char nullstring[] = "unallocated";
+ #endif
++      buf = vmalloc(master->erasesize);
++      if (!buf)
++              return -ENOMEM;
++
++ restart:
+       if ( directory < 0 ) {
+               offset = master->size + directory * master->erasesize;
+-              while (master->block_isbad && 
++              while (master->block_isbad &&
+                      master->block_isbad(master, offset)) {
+                       if (!offset) {
+                       nogood:
+                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++                              vfree(buf);
+                               return -EIO;
+                       }
+                       offset -= master->erasesize;
+               }
+       } else {
+               offset = directory * master->erasesize;
+-              while (master->block_isbad && 
++              while (master->block_isbad &&
+                      master->block_isbad(master, offset)) {
+                       offset += master->erasesize;
+                       if (offset == master->size)
+                               goto nogood;
+               }
+       }
+-      buf = vmalloc(master->erasesize);
+-
+-      if (!buf)
+-              return -ENOMEM;
+-
+       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+              master->name, offset);
+@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
+       }
+       if (i == numslots) {
+               /* Didn't find it */
++              if (offset + master->erasesize < master->size) {
++                      /* not at the end of the flash yet, maybe next block :) */
++                      directory++;
++                      goto restart;
++              }
+               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+                      master->name);
+               ret = 0;
diff --git a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch
new file mode 100644 (file)
index 0000000..710314d
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/drivers/net/ar2313/ar2313.c
++++ b/drivers/net/ar2313/ar2313.c
+@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n
+       for (i = 0; i < nr_bufs; i++) {
+               struct sk_buff *skb;
+               ar2313_descr_t *rd;
++              int offset = RX_OFFSET;
+               if (sp->rx_skb[idx]) {
+ #if DEBUG_RX
+@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n
+                * Make sure IP header starts on a fresh cache line.
+                */
+               skb->dev = dev;
+-              skb_reserve(skb, RX_OFFSET);
++              if (sp->phy_dev)
++                      offset += sp->phy_dev->pkt_align;
++              skb_reserve(skb, offset);
+               sp->rx_skb[idx] = skb;
+               rd = (ar2313_descr_t *) & sp->rx_ring[idx];
+@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi
+                       /* alloc new buffer. */
+                       skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
+                       if (skb_new != NULL) {
++                              int offset;
+                               skb = sp->rx_skb[idx];
+                               /* set skb */
+@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi
+                                               ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
+                               dev->stats.rx_bytes += skb->len;
+-                              skb->protocol = eth_type_trans(skb, dev);
++
+                               /* pass the packet to upper layers */
+-                              netif_rx(skb);
++                              sp->rx(skb);
+                               skb_new->dev = dev;
++
+                               /* 16 bit align */
+-                              skb_reserve(skb_new, RX_OFFSET + 32);
++                              offset = RX_OFFSET + 32;
++                              if (sp->phy_dev)
++                                      offset += sp->phy_dev->pkt_align;
++                              skb_reserve(skb_new, offset);
+                               /* reset descriptor's curr_addr */
+                               rxdesc->addr = virt_to_phys(skb_new->data);
+@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct 
+               return PTR_ERR(phydev);
+       }
++      sp->rx = phydev->netif_rx;
++
+       /* mask with MAC supported features */
+       phydev->supported &= (SUPPORTED_10baseT_Half
+               | SUPPORTED_10baseT_Full
+--- a/drivers/net/ar2313/ar2313.h
++++ b/drivers/net/ar2313/ar2313.h
+@@ -107,6 +107,8 @@ typedef struct {
+  */
+ struct ar2313_private {
+       struct net_device *dev;
++      int (*rx)(struct sk_buff *skb);
++
+       int version;
+       u32 mb[2];
diff --git a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch b/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch
new file mode 100644 (file)
index 0000000..9b4331c
--- /dev/null
@@ -0,0 +1,43 @@
+--- a/arch/mips/kernel/traps.c
++++ b/arch/mips/kernel/traps.c
+@@ -47,6 +47,7 @@
+ #include <asm/mmu_context.h>
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
++#include <asm/time.h>
+ extern void check_wait(void);
+ extern asmlinkage void r4k_wait(void);
+@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void)
+        */
+       if (cpu_has_mips_r2) {
+               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++              if (get_c0_compare_irq)
++                      cp0_compare_irq = get_c0_compare_irq();
+               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+               if (cp0_perfcount_irq == cp0_compare_irq)
+                       cp0_perfcount_irq = -1;
+--- a/arch/mips/include/asm/time.h
++++ b/arch/mips/include/asm/time.h
+@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
+ #ifdef CONFIG_CEVT_R4K
+ extern int mips_clockevent_init(void);
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ #else
+ static inline int mips_clockevent_init(void)
+ {
+--- a/arch/mips/atheros/board.c
++++ b/arch/mips/atheros/board.c
+@@ -265,6 +265,11 @@ void (*board_time_init)(void);
+ void __init plat_time_init(void) {
+     board_time_init();
+ }
++
++unsigned int __cpuinit get_c0_compare_irq(void)
++{
++      return CP0_LEGACY_COMPARE_IRQ;
++}
+ #endif
+ void __init arch_init_irq(void)
diff --git a/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch b/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch
new file mode 100644 (file)
index 0000000..03a66ff
--- /dev/null
@@ -0,0 +1,56 @@
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,22 @@
+ #include <asm/cevt-r4k.h>
+ /*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++      do { \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++      } while (0)
++
++/*
+  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+  * of these routines with SMTC-specific variants.
+  */
+@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
+       cnt = read_c0_count();
+       cnt += delta;
+       write_c0_compare(cnt);
++      compare_change_hazard();
+       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+       return res;
+ }
+@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
+       return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register.  4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+-      do { \
+-              irq_disable_hazard(); \
+-              irq_disable_hazard(); \
+-              irq_disable_hazard(); \
+-              irq_disable_hazard(); \
+-      } while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+       unsigned int delta;