[ramips] add Ralink V11ST-FE board support
authorFlorian Fainelli <florian@openwrt.org>
Wed, 15 Feb 2012 21:13:11 +0000 (21:13 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Wed, 15 Feb 2012 21:13:11 +0000 (21:13 +0000)
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561

target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
target/linux/ramips/base-files/etc/uci-defaults/leds
target/linux/ramips/base-files/etc/uci-defaults/network
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c [new file with mode: 0644]
target/linux/ramips/rt288x/config-2.6.39
target/linux/ramips/rt288x/config-3.2

index 2621604..b167c52 100755 (executable)
@@ -69,6 +69,9 @@ get_status_led() {
        rt-n56u)
                status_led="asus:blue:power"
                ;;
+       v11st-fe)
+               status_led="v11st-fe:green:status"
+               ;;
        v22rw-2x2)
                status_led="v22rw-2x2:green:security"
                ;;
index 65b2cd3..5e6fa42 100644 (file)
@@ -58,6 +58,7 @@ case "$FIRMWARE" in
        nw718 | \
        omni-emb | \
        rt-n15 | \
+       v11st-fe | \
        v22rw-2x2 | \
        w502u | \
        wcr-150gn | \
index bcd17f9..891a1a7 100755 (executable)
@@ -60,6 +60,9 @@ case $board in
        nw718)
                set_usb_led "nw718:amber:usb"
                ;;
+       v11st-fe)
+               set_wifi_led "rt2800pci-phy0::radio"
+               ;;
        w502u)
                set_usb_led "alfa:blue:usb"
                set_wifi_led "rt2800pci-phy0::radio"
index 0f97bc3..a36341c 100755 (executable)
@@ -50,6 +50,13 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 8t"
                ;;
 
+       v11st-fe)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "switch0" "2" "0 5t"
+               ;;
+
        wcr-150gn)
                ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
                ;;
index 9c1a7dc..07bdf16 100755 (executable)
@@ -122,6 +122,9 @@ ramips_board_name() {
        *"Sitecom WL-351 v1 002")
                name="wl-351"
                ;;
+       *"Ralink V11ST-FE")
+               name="v11st-fe"
+               ;;
        *"WLI-TX4-AG300N")
                name="wli-tx4-ag300n"
                ;;
index fa6d985..d6c9911 100644 (file)
@@ -16,6 +16,7 @@ enum ramips_mach_type {
        /* RT2880 based machines */
        RAMIPS_MACH_F5D8235_V1,         /* Belkin F5D8235 v1 */
        RAMIPS_MACH_RT_N15,             /* Asus RT-N15 */
+       RAMIPS_MACH_V11ST_FE,           /* Ralink V11ST-FE */
        RAMIPS_MACH_WLI_TX4_AG300N,     /* Buffalo WLI-TX4-AG300N */
        RAMIPS_MACH_WZR_AGL300NH,       /* Buffalo WZR-AGL300NH */
 
index 4189d9e..a2593e8 100644 (file)
@@ -11,6 +11,11 @@ config RT288X_MACH_RT_N15
        select RALINK_DEV_GPIO_BUTTONS
        select RALINK_DEV_GPIO_LEDS
 
+config RT288X_MACH_V11ST_FE
+       bool "Ralink V11ST-FE board support"
+       select RALINK_DEV_GPIO_BUTTONS
+       select RALINK_DEV_GPIO_LEDS
+
 config RT288X_MACH_WLI_TX4_AG300N
        bool "Buffalo WLI-TX4-AG300N board support"
        select RALINK_DEV_GPIO_BUTTONS
index 5205706..473f855 100644 (file)
@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)            += early_printk.o
 
 obj-$(CONFIG_RT288X_MACH_F5D8235_V1)   += mach-f5d8235-v1.o
 obj-$(CONFIG_RT288X_MACH_RT_N15)       += mach-rt-n15.o
+obj-$(CONFIG_RT288X_MACH_V11ST_FE)     += mach-v11st-fe.o
 obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
 obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c
new file mode 100644 (file)
index 0000000..6314680
--- /dev/null
@@ -0,0 +1,106 @@
+/*
+ *  Ralink V11ST-FE board support
+ *
+ *  Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ethtool.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define V11ST_FE_GPIO_STATUS_LED       12
+#define V11ST_FE_GPIO_BUTTON_WPS       0
+
+#define V11ST_FE_KEYS_POLL_INTERVAL    20
+#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL        (3 * V11ST_FE_KEYS_POLL_INTERVAL)
+
+static struct gpio_led v11st_fe_leds_gpio[] __initdata = {
+       {
+               .name           = "v11st-fe:green:status",
+               .gpio           = V11ST_FE_GPIO_STATUS_LED,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = {
+       {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = V11ST_FE_GPIO_BUTTON_WPS,
+       }
+};
+
+static struct mtd_partition v11st_fe_partitions[] = {
+       {
+               .name   = "u-boot",
+               .offset = 0,
+               .size   = 0x030000,
+               .mask_flags = MTD_WRITEABLE,
+       }, {
+               .name   = "u-boot-env",
+               .offset = 0x030000,
+               .size   = 0x010000,
+               .mask_flags = MTD_WRITEABLE,
+       }, {
+               .name   = "factory",
+               .offset = 0x040000,
+               .size   = 0x010000,
+               .mask_flags = MTD_WRITEABLE,
+       }, {
+               .name   = "kernel",
+               .offset = 0x050000,
+               .size   = 0x140000,
+       }, {
+               .name   = "rootfs",
+               .offset = 0x190000,
+               .size   = 0x210000,
+       }
+};
+
+static void __init rt_v11st_fe_init(void)
+{
+       rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+
+       rt288x_flash0_data.nr_parts = ARRAY_SIZE(v11st_fe_partitions);
+       rt288x_flash0_data.parts = v11st_fe_partitions;
+       rt288x_register_flash(0);
+
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio),
+                                 v11st_fe_leds_gpio);
+
+       ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL,
+                                    ARRAY_SIZE(v11st_fe_gpio_buttons),
+                                    v11st_fe_gpio_buttons);
+
+       rt288x_register_wifi();
+
+       /* Board is connected to an IC+ IP175C Fast Ethernet switch */
+       rt288x_eth_data.speed = SPEED_100;
+       rt288x_eth_data.duplex = DUPLEX_FULL;
+       rt288x_eth_data.tx_fc = 1;
+       rt288x_eth_data.rx_fc = 1;
+       rt288x_eth_data.phy_mask = BIT(0);
+       rt288x_register_ethernet();
+
+       rt288x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init);
index aaed397..a84d5ca 100644 (file)
@@ -63,6 +63,7 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
 # CONFIG_LEDS_GPIO is not set
 CONFIG_MACH_NO_WESTBRIDGE=y
@@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_V11ST_FE=y
 CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
 CONFIG_RTL8366S_PHY=y
index 186950c..1ae35b5 100644 (file)
@@ -61,6 +61,7 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=m
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_LANTIQ is not set
@@ -96,6 +97,7 @@ CONFIG_RALINK_RT288X=y
 CONFIG_RAMIPS_WDT=y
 CONFIG_RT288X_MACH_F5D8235_V1=y
 CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_V11ST_FE=y
 CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
 CONFIG_RT288X_MACH_WZR_AGL300NH=y
 CONFIG_RTL8366S_PHY=y