make use of the adm6996 switch for atheros devices that support it (autodetected...
authorFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 03:24:59 +0000 (03:24 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 03:24:59 +0000 (03:24 +0000)
SVN-Revision: 10871

target/linux/atheros/base-files/etc/preinit.arch
target/linux/atheros/base-files/etc/uci-defaults/network [new file with mode: 0644]

index 7e911ab..d02e407 100755 (executable)
@@ -1,8 +1,19 @@
 # reset button only supported on ar5315+ at the moment
 grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
-       ifname=eth0
+       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+               vconfig set_name_type DEV_PLUS_VID_NO_PAD
+               ifconfig eth0 up
+               vconfig add eth0 0
+               ifname=eth0.0
+       else
+               ifname=eth0
+       fi
        failsafe_ip
        netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
        ifconfig "$ifname" 0.0.0.0 down
        sleep 2
+       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+               vconfig rem eth0.0
+               ifconfig eth0 down
+       fi
 }
diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network
new file mode 100644 (file)
index 0000000..e2fe6cd
--- /dev/null
@@ -0,0 +1,10 @@
+#!/bin/sh
+if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+       uci batch <<EOF
+set network.lan.ifname=eth0.0
+set network.wan=interface
+set network.wan.ifname=eth0.1
+set network.wan.proto=dhcp
+commit network
+EOF
+fi