ar71xx: remove hardwired interface parameters from mach-* files
authorGabor Juhos <juhosg@openwrt.org>
Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)
SVN-Revision: 29103

13 files changed:
target/linux/ar71xx/files/arch/mips/ar71xx/mach-all0258n.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap121.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-600-a1.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-om2p.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb750.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3x20.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr703n.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd-v4.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr741nd.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-whr-hp-g300n.c
target/linux/ar71xx/files/arch/mips/ar71xx/mach-zcn-1523h.c

index b94d8ee..18d0a93 100644 (file)
@@ -31,7 +31,6 @@
 #define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
 
 /* showed up in the original firmware's bootlog */
-#define ALL0258N_LAN_PHYMASK BIT(4)
 #define ALL0258N_SEC_PHYMASK BIT(3)
 
 /*
@@ -127,12 +126,7 @@ static void __init all0258n_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
 
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.phy_mask = ALL0258N_LAN_PHYMASK;
-
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
        ar71xx_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
 
        ar71xx_add_device_mdio(0, 0x0);
 
index 8766f06..d14996f 100644 (file)
@@ -188,20 +188,12 @@ static void __init ap121_common_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        ar9xxx_add_device_wmac(art + AP121_CALDATA_OFFSET,
index e503c58..ba833e8 100644 (file)
@@ -133,23 +133,15 @@ static void __init dir_600_a1_setup(void)
                                         ARRAY_SIZE(dir_600_a1_gpio_keys),
                                         dir_600_a1_gpio_keys);
 
-       ar71xx_eth1_data.has_ar7240_switch = 1;
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        ap91_pci_init(ee, mac);
index 848fbe2..e43ad74 100644 (file)
@@ -98,16 +98,6 @@ static void __init om2p_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0);
 
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = OM2P_WAN_PHYMASK;
-
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-
        ar71xx_add_device_eth(0);
        ar71xx_add_device_eth(1);
 
index 8775677..ea1f089 100644 (file)
@@ -120,20 +120,12 @@ static void __init rb750_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        platform_device_register(&rb750_leds_device);
index b4dbbb6..ee1a4b6 100644 (file)
@@ -123,23 +123,14 @@ static void __init tl_mr3x20_setup(void)
                                         ARRAY_SIZE(tl_mr3x20_gpio_keys),
                                         tl_mr3x20_gpio_keys);
 
-       ar71xx_eth1_data.has_ar7240_switch = 1;
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        ar71xx_add_device_usb();
index 5d2d2fd..ebe7ab5 100644 (file)
@@ -106,11 +106,6 @@ static void __init tl_wa901nd_setup(void)
         * however we have a single LAN port only.
         */
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed       = SPEED_1000;
-       ar71xx_eth1_data.duplex      = DUPLEX_FULL;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-
        ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
 
index 54733db..6ddd33b 100644 (file)
@@ -106,11 +106,6 @@ static void __init tl_wr703n_setup(void)
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
 
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
-
        ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(0);
 
index e987afd..0760008 100644 (file)
@@ -135,16 +135,6 @@ static void __init tl_wr741ndv4_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
-
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-
        ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
        ar71xx_add_device_eth(0);
index 28e1fe9..60e6d24 100644 (file)
@@ -108,23 +108,15 @@ static void __init tl_wr741nd_setup(void)
                                         ARRAY_SIZE(tl_wr741nd_gpio_keys),
                                         tl_wr741nd_gpio_keys);
 
-       ar71xx_eth1_data.has_ar7240_switch = 1;
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        ap91_pci_setup_wmac_led_pin(1);
index 37ce376..06ce212 100644 (file)
@@ -249,11 +249,6 @@ static void __init ubnt_m_setup(void)
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0);
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = UBNT_M_WAN_PHYMASK;
-
        ar71xx_add_device_eth(0);
 
        ap91_pci_init(ee, NULL);
@@ -282,12 +277,6 @@ MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
 static void __init ubnt_nano_m_setup(void)
 {
        ubnt_m_setup();
-
-       ar71xx_eth1_data.has_ar7240_switch = 1;
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
        ar71xx_add_device_eth(1);
 }
 
@@ -316,11 +305,6 @@ static void __init ubnt_unifi_setup(void)
        ar71xx_add_device_mdio(0, ~UBNT_M_WAN_PHYMASK);
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = UBNT_M_WAN_PHYMASK;
-
        ar71xx_add_device_eth(0);
 
        ap91_pci_init(ee, NULL);
index 6e2113d..ccc3650 100644 (file)
@@ -144,23 +144,14 @@ static void __init whrhpg300n_setup(void)
                                         ARRAY_SIZE(whrhpg300n_gpio_keys),
                                         whrhpg300n_gpio_keys);
 
-       ar71xx_eth1_data.has_ar7240_switch = 1;
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       /* WAN port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(4);
+       ar71xx_add_device_mdio(0, 0x0);
 
        /* LAN ports */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
-       ar71xx_add_device_mdio(0, 0x0);
        ar71xx_add_device_eth(1);
+       /* WAN port */
        ar71xx_add_device_eth(0);
 
        ap91_pci_setup_wmac_led_pin(1);
index e2c2479..7828b37 100644 (file)
@@ -174,17 +174,9 @@ static void __init zcn_1523h_generic_setup(void)
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
 
-       /* LAN1 port */
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth0_data.speed = SPEED_100;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-
-       /* LAN2 port */
-       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
        ar71xx_add_device_mdio(0, 0x0);
+
+       /* LAN1 port */
        ar71xx_add_device_eth(0);
 }
 
@@ -207,6 +199,8 @@ static void __init zcn_1523h_5_setup(void)
 
        ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
                                        zcn_1523h_5_leds_gpio);
+
+       /* LAN2 port */
        ar71xx_add_device_eth(1);
 }