--- /dev/null
+#
+# Copyright (C) 2008 OpenWrt.org
+#
+# $Id: $
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gw6c
+PKG_VERSION:=5.0
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/gw6c
+ SECTION:=ipv6
+ CATEGORY:=IPv6
+ DEPENDS:=+libpthread +ip +kmod-tun +kmod-ipv6 +uclibcxx +radvd
+ TITLE:=IPv6 tunnel client software
+ URL:=http://www.go6.net
+endef
+
+define Package/gw6c/description
+ Client to configure an IPv6 tunnel to
+ Hexago/freenet6/go6.net's migration broker.
+endef
+
+define Build/Prepare
+ wget -t1 --timeout=20 -O $(DL_DIR)/$(PKG_NAME)-$(PKG_VERSION).tar.bz2 "http://www.go6.net/4105/file.asp?file_id=136"
+ $(INSTALL_DIR) $(PKG_BUILD_DIR)
+ bzcat $(DL_DIR)/$(PKG_NAME)-$(PKG_VERSION).tar.bz2 | $(TAR) -C $(PKG_BUILD_DIR) -xvf -
+ $(CP) $(PKG_BUILD_DIR)/gw6c/src/gw6c-config/gw6cconfig/gw6c_c_wrapper.h $(PKG_BUILD_DIR)/gw6c/src/gw6c/include
+endef
+
+GW6C_OPTS:= \
+ C_COMPILER="$(TARGET_CC) -c -DNO_STDLIBCXX" \
+ COMPILER="$(TARGET_CROSS)g++ -c -DNO_STDLIBCXX" \
+ CPP_FLAGS="$(TARGET_CFLAGS) -fno-builtin -nostdinc++ -I. -Wall -DNDEBUG -I$(STAGING_DIR)/usr/include/uClibc++ -I$(STAGING_DIR)/usr/include -I$(STAGING_DIR)/include" \
+ RANLIB="$(TARGET_CROSS)ranlib" \
+ ARCHIVER="$(TARGET_CROSS)ar" \
+ C_LINKER="$(TARGET_CC)" \
+ LINKER="$(TARGET_CROSS)g++" \
+ exportdir=$(PKG_BUILD_DIR)/gw6c/src/gw6c \
+ export
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR)/gw6c/src/gw6c-config \
+ $(GW6C_OPTS)
+ $(MAKE) -C $(PKG_BUILD_DIR)/gw6c/src/gw6c-messaging \
+ $(GW6C_OPTS)
+ $(MAKE) -C $(PKG_BUILD_DIR)/gw6c/src/gw6c \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS) -fno-builtin -Wall -I$(PKG_BUILD_DIR)/gw6c/src/gw6c/include \
+ -I$(PKG_BUILD_DIR)/gw6c/src/gw6c/platform/openwrt -I$(PKG_BUILD_DIR)/gw6c/src/gw6c" \
+ LDFLAGS="-L$(PKG_BUILD_DIR)/gw6c/src/gw6c/gw6cconfig \
+ -L$(PKG_BUILD_DIR)/gw6c/src/gw6c/gw6cmessaging \
+ -L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib -nodefaultlibs -luClibc++ -lgcc_s" \
+ target="openwrt" \
+ installdir="$(PKG_INSTALL_DIR)"
+endef
+
+define Package/gw6c/install
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(INSTALL_BIN) $(PKG_BUILD_DIR)/gw6c/src/gw6c/bin/$(PKG_NAME) $(1)/usr/sbin
+ $(INSTALL_DIR) $(1)/usr/share/gw6c/template
+ $(CP) ./files/openwrt.sh $(1)/usr/share/gw6c/template
+ $(INSTALL_DIR) $(1)/etc/init.d
+ $(INSTALL_BIN) ./files/gw6c.init $(1)/etc/init.d/gw6c
+ $(INSTALL_DIR) $(1)/etc/config
+ $(INSTALL_CONF) ./files/gw6c.config $(1)/etc/config/gw6c
+endef
+
+$(eval $(call BuildPackage,gw6c))
--- /dev/null
+config gw6c basic
+ #Comment out next line to enable gw6c
+ option disabled 1
+
+ #Leave empty if connecting anonymously
+ option userid
+ option passwd
+
+ #For anonymous use anon.frenet6.net and
+ #account holders should use broker.freenet6.net
+ option server anon.freenet6.net
+
+ #auth_method <anonymous|any|passds-3des-1|digest-md5|plain>
+ #Use anonymous with anonymous access and
+ #any if you are account holder
+ option auth_method anonymous
+
+config gw6c routing
+ #host_type <host|router>
+ option host_type host
+ option prefixlen 48
+ option ifprefix br-lan
+
+ #DNS server list to which the reverse prefix
+ #will be delegated. Separate servers with :
+ option dns_server
+
+config gw6c advanced
+ #Location where to store configuration file
+ option gw6c_conf /tmp/gw6c.conf
+ option gw6c_dir /usr/share/gw6c
+ option auto_retry yes
+ option retry_delay 30
+ option keepalive yes
+ #keepalive interval
+ option interval 30
+ #tunnel_mode <v6v4|v6udpv4|v6anyv4|v4v6>
+ option if_tunnel_mode v6anyv4
+ option if_v6v4 sit1
+ option if_v6udpv4 tun
+ option if_v4v6 sit0
+ option client_v4 auto
+ option client_v6 auto
+ option template openwrt
+ option proxy_client no
+
+config gw6c broker
+ option broker_list /tmp/gw6c-broker-list.txt
+ option last_server /tmp/gw6c-last-server.txt
+ # Always use last known working server? <yes|no>
+ option always_same_serv no
+
+config gw6c logging
+ option log_console 0
+ option log_stderr 1
+ option log_file 0
+ option log_syslog 0
+
+ option log_filename /var/log/gw6c.log
+ option log_rotation yes
+ #Max size when using log file rotation
+ #possible values: 16|32|128|1024
+ option log_maxsize 32
+
+ #<USER|LOCAL[0-7]>
+ option syslog_facility USER
--- /dev/null
+#!/bin/sh /etc/rc.common
+#Copyright (C) 2007 RoadRunner.cx
+START=52
+
+genconf() {
+
+ [ -f /etc/config/gw6c ] || {
+ echo "You are missing configuration file /etc/config/gw6c"
+ return 0
+ }
+
+ config_load "gw6c"
+
+ config_get DISABLED basic disabled
+
+ [ "$DISABLED" == "1" ] && {
+ echo "You haven't edited your configuration file. Gateway6 is disabled."
+ return 0
+ }
+
+ config_get USERID basic userid
+ config_get PASSWORD basic passwd
+ config_get SERVER basic server
+ config_get AUTH_METHOD basic auth_method
+
+ config_get HOST_TYPE routing host_type
+ config_get PREFIX_LEN routing prefixlen
+ config_get IF_PREFIX routing ifprefix
+ config_get DNS_SERVER routing dns_server
+
+ config_get GW6C_CONF advanced gw6c_conf
+ config_get GW6C_DIR advanced gw6c_dir
+ config_get AUTO_RETRY advanced auto_retry
+ config_get RETRY_DELAY advanced retry_delay
+ config_get KEEPALIVE advanced keepalive
+ config_get KEEPALIVE_INTERVAL advanced interval
+ config_get TUNNEL_MODE advanced if_tunnel_mode
+ config_get IF_V6V4 advanced if_v6v4
+ config_get IF_V6UDPV4 advanced if_v6udpv4
+ config_get IF_V4V6 advanced if_v4v6
+ config_get CLIENT_V4 advanced client_v4
+ config_get CLIENT_V6 advanced client_v6
+ config_get TEMPLATE advanced template
+ config_get PROXY_CLIENT advanced proxy_client
+
+ config_get BROKER_LIST broker broker_list
+ config_get LAST_SERVER broker last_server
+ config_get ALWAYS_SAMESERV broker always_same_serv
+
+ config_get LOG_CONSOLE logging log_console
+ config_get LOG_STDERR logging log_stderr
+ config_get LOG_FILE logging log_file
+ config_get LOG_SYSLOG logging log_syslog
+ config_get LOG_FILENAME logging log_filename
+ config_get LOG_ROTATE logging log_rotation
+ config_get LOG_MAXSIZE logging log_maxsize
+ config_get SYSLOG_FACILITY logging syslog_facility
+
+ cat >$GW6C_CONF <<EOF
+userid=$USERID
+passwd=$PASSWORD
+server=$SERVER
+auth_method=$AUTH_METHOD
+host_type=$HOST_TYPE
+prefixlen=$PREFIX_LEN
+if_prefix=$IF_PREFIX
+dns_server=$DNS_SERVER
+gw6_dir=$GW6C_DIR
+auto_retry_connect=$AUTO_RETRY
+retry_delay=$RETRY_DELAY
+keepalive=$KEEPALIVE
+keepalive_interval=$KEEPALIVE_INTERVAL
+tunnel_mode=$TUNNEL_MODE
+if_tunnel_v6v4=$IF_V6V4
+if_tunnel_v6udpv4=$IF_V6UDPV4
+if_tunnel_v4v6=$IF_V4V6
+client_v4=$CLIENT_V4
+client_v6=$CLIENT_V6
+template=$TEMPLATE
+proxy_client=$PROXY_CLIENT
+broker_list=$BROKER_LIST
+last_server=$LAST_SERVER
+always_use_same_server=$ALWAYS_SAMESERV
+log_console=$LOG_CONSOLE
+log_stderr=$LOG_STDERR
+log_file=$LOG_FILE
+log_syslog=$LOG_SYSLOG
+log_filename=$LOG_FILENAME
+log_rotation=$LOG_ROTATE
+log_rotation_size=$LOG_MAXSIZE
+syslog_facility=$SYSLOG_FACILITY
+EOF
+}
+
+start() {
+ genconf
+ if [ -z "$GW6C_CONF" ] || [ ! -f "$GW6C_CONF" ]; then
+ echo "Gateway6 client cannot start."
+ else
+ echo "Starting Gateway6 client."
+ /usr/sbin/gw6c -f "$GW6C_CONF"
+ fi
+}
+
+stop() {
+ [ `ps ax|grep -v grep|grep -c gw6c` != "0" ] && {
+ killall -q gw6c
+ [ `ps ax|grep -v grep|grep -c radvd` != "0" ] && killall -q radvd
+ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
+ }
+}
--- /dev/null
+#!/bin/sh
+#
+# openwrt.sh,v 1.1.4.1 2007/01/12 19:16:12 dgregoire Exp
+#
+# This source code copyright (c) Hexago Inc. 2002-2007.
+#
+# LICENSE NOTICE: You may use and modify this source code only if you
+# have executed a valid license agreement with Hexago Inc. granting
+# you the right to do so, the said license agreement governing such
+# use and modifications. Copyright or other intellectual property
+# notices are not to be removed from the source code.
+#
+# Note: IPV6 support and tun Support must be enabled before calling this script.
+#
+
+
+LANGUAGE=C
+
+if [ -z $TSP_VERBOSE ]; then
+ TSP_VERBOSE=0
+fi
+
+KillProcess()
+{
+ if [ ! -z $TSP_VERBOSE ]; then
+ if [ $TSP_VERBOSE -ge 2 ]; then
+ echo killing $*
+ fi
+ fi
+ PID=`ps axww | grep $1 | grep -v grep | awk '{ print $1;}'`
+ echo $PID
+ if [ ! -z $PID ]; then
+ kill $PID
+ fi
+}
+
+Display()
+{
+ if [ -z $TSP_VERBOSE ]; then
+ return;
+ fi
+ if [ $TSP_VERBOSE -lt $1 ]; then
+ return;
+ fi
+ shift
+ echo "$*"
+}
+
+Exec()
+{
+ if [ ! -z $TSP_VERBOSE ]; then
+ if [ $TSP_VERBOSE -ge 2 ]; then
+ echo $*
+ fi
+ fi
+ $* # Execute command
+ if [ $? -ne 0 ]; then
+ echo "Error while executing $1"
+ echo " Command: $*"
+ exit 1
+ fi
+}
+
+ExecNoCheck()
+{
+ if [ ! -z $TSP_VERBOSE ]; then
+ if [ $TSP_VERBOSE -ge 2 ]; then
+ echo $*
+ fi
+ fi
+ $* # Execute command
+}
+
+# Program localization
+
+Display 1 "--- Start of configuration script. ---"
+Display 1 "Script: " `basename $0`
+
+ifconfig=/sbin/ifconfig
+route=/sbin/route
+ipconfig=/usr/sbin/ip
+rtadvd=/usr/sbin/radvd
+rtadvd_pid=/var/run/radvd.pid
+sysctl=/sbin/sysctl
+rtadvdconfigfilename=gw6c-radvd.conf
+rtadvdconfigfile=/tmp/$rtadvdconfigfilename
+
+if [ -z $TSP_HOME_DIR ]; then
+ echo "TSP_HOME_DIR variable not specified!;"
+ exit 1
+fi
+
+if [ ! -d $TSP_HOME_DIR ]; then
+ echo "Error : directory $TSP_HOME_DIR does not exist"
+ exit 1
+fi
+#
+
+if [ -z $TSP_HOST_TYPE ]; then
+ echo Error: TSP_HOST_TYPE not defined.
+ exit 1
+fi
+
+if [ X"${TSP_HOST_TYPE}" = X"host" ] || [ X"${TSP_HOST_TYPE}" = X"router" ]; then
+ #
+ # Configured tunnel config (IPv6)
+ Display 1 "$TSP_TUNNEL_INTERFACE setup"
+ if [ X"${TSP_TUNNEL_MODE}" = X"v6v4" ]; then
+ Display 1 "Setting up link to $TSP_SERVER_ADDRESS_IPV4"
+ ExecNoCheck $ipconfig tunnel del $TSP_TUNNEL_INTERFACE
+ ExecNoCheck sleep 1
+ Exec $ipconfig tunnel add $TSP_TUNNEL_INTERFACE mode sit ttl 64 remote $TSP_SERVER_ADDRESS_IPV4
+ fi
+
+ Exec $ifconfig $TSP_TUNNEL_INTERFACE up
+
+ PREF=`echo $TSP_CLIENT_ADDRESS_IPV6 | sed "s/:0*/:/g" |cut -d : -f1-2`
+ OLDADDR=`$ifconfig $TSP_TUNNEL_INTERFACE | grep "inet6.* $PREF" | sed -e "s/^.*inet6 addr: //" -e "s/ Scope.*\$//"`
+ if [ ! -z $OLDADDR ]; then
+ Display 1 "Removing old IPv6 address $OLDADDR"
+ Exec $ifconfig $TSP_TUNNEL_INTERFACE inet6 del $OLDADDR
+ fi
+ Display 1 "This host is: $TSP_CLIENT_ADDRESS_IPV6/$TSP_TUNNEL_PREFIXLEN"
+ Exec $ifconfig $TSP_TUNNEL_INTERFACE add $TSP_CLIENT_ADDRESS_IPV6/$TSP_TUNNEL_PREFIXLEN
+ Exec $ifconfig $TSP_TUNNEL_INTERFACE mtu 1280
+ #
+ # Default route
+ Display 1 "Adding default route"
+ ExecNoCheck $route -A inet6 del ::/0 2>/dev/null # delete old default route
+ ExecNoCheck $route -A inet6 del 2000::/3 2>/dev/null # delete old gw route
+ Exec $route -A inet6 add ::/0 dev $TSP_TUNNEL_INTERFACE
+ Exec $route -A inet6 add 2000::/3 dev $TSP_TUNNEL_INTERFACE
+fi
+
+# Router configuration if required
+if [ X"${TSP_HOST_TYPE}" = X"router" ]; then
+ Display 1 "Router configuration"
+ Display 1 "Kernel setup"
+ if [ X"${TSP_PREFIXLEN}" != X"64" ]; then
+ #Better way on linux to avoid loop with the remaining /48?
+ $route -A inet6 add $TSP_PREFIX::/$TSP_PREFIXLEN dev $TSP_HOME_INTERFACE 2>/dev/null
+ fi
+ Display 1 "Adding prefix to $TSP_HOME_INTERFACE"
+ OLDADDR=`$ifconfig $TSP_HOME_INTERFACE | grep "inet6.* $PREF" | sed -e "s/^.*inet6 addr: //" -e "s/ Scope.*\$//"`
+ if [ ! -z $OLDADDR ]; then
+ Display 1 "Removing old IPv6 address $OLDADDR"
+ Exec $ifconfig $TSP_HOME_INTERFACE del $OLDADDR
+ fi
+ Exec $ifconfig $TSP_HOME_INTERFACE add $TSP_PREFIX::1/64
+ # Router advertisement configuration
+ Display 1 "Create new $rtadvdconfigfile"
+ echo "##### rtadvd.conf made by Gateway6 Client ####" > "$rtadvdconfigfile"
+ echo "interface $TSP_HOME_INTERFACE" >> "$rtadvdconfigfile"
+ echo "{" >> "$rtadvdconfigfile"
+ echo " AdvSendAdvert on;" >> "$rtadvdconfigfile"
+ echo " prefix $TSP_PREFIX::/64" >> "$rtadvdconfigfile"
+ echo " {" >> "$rtadvdconfigfile"
+ echo " AdvOnLink on;" >> "$rtadvdconfigfile"
+ echo " AdvAutonomous on;" >> "$rtadvdconfigfile"
+ echo " };" >> "$rtadvdconfigfile"
+ echo "};" >> "$rtadvdconfigfile"
+ echo "" >> "$rtadvdconfigfile"
+ /etc/init.d/radvd stop
+ # Then enable forwarding. Killing
+ # radvd disables forwarding and radvd
+ # does NOT start without forwarding enabled
+ Exec $sysctl -w net.ipv6.conf.all.forwarding=1 # ipv6_forwarding enabled
+ if [ -f $rtadvdconfigfile ]; then
+ Exec $rtadvd -p $rtadvd_pid -C $rtadvdconfigfile
+ Display 1 "Starting radvd: $rtadvd -p $rtadvd_pid -C $rtadvdconfigfile"
+ else
+ echo "Error : file $rtadvdconfigfile not found"
+ exit 1
+ fi
+fi
+
+Display 1 "--- End of configuration script. ---"
+
+exit 0
+
+#---------------------------------------------------------------------
projects / openwrt / svn-archive / archive.git / commitdiff