Add uci init script and config file.

SVN-Revision: 12687

diff --git a/ipv6/aiccu/files/aiccu.conf b/ipv6/aiccu/files/aiccu.conf
index ecd5bbf0d19ff090af5031a9b228d34e52f7d3a6..bbde1221f5a755ff20e77ccdaf0b8db6db51aad6 100755 (executable)
--- a/ipv6/aiccu/files/aiccu.conf
+++ b/ipv6/aiccu/files/aiccu.conf
@@ -1,78 +1,11 @@
-# AICCU Configuration
-
-# Login information (defaults: none)
-#username <your nichandle/username>
-#password <your password>
-
-# Protocol and server to use for setting up the tunnel (defaults: none)
-#protocol <tic|tsp|l2tp>
-#server <server to use>
-
-# Interface names to use (default: aiccu)
-# ipv6_interface is the name of the interface that will be used as a tunnel interface.
-# On *BSD the ipv6_interface should be set to gifX (eg gif0) for proto-41 tunnels
-# or tunX (eg tun0) for AYIYA tunnels.
-ipv6_interface sixxs
-
-# The tunnel_id to use (default: none)
-# (only required when there are multiple tunnels in the list)
-#tunnel_id Txxxx
-
-# Be verbose? (default: false)
-verbose false
-
-# Daemonize? (default: true)
-# Set to false if you want to see any output
-# When true output goes to syslog
-#
-# WARNING: never run AICCU from DaemonTools or a similar automated
-# 'restart' tool/script. When AICCU does not start, it has a reason
-# not to start which it gives on either the stdout or in the (sys)log
-# file. The TIC server *will* automatically disable accounts which
-# are detected to run in this mode.
-#
-daemonize true
-
-# Automatic Login and Tunnel activation?
-automatic true
-
-# Require TLS?
-# When set to true, if TLS is not supported on the server
-# the TIC transaction will fail.
-# When set to false, it will try a starttls, when that is
-# not supported it will continue.
-# In any case if AICCU is build with TLS support it will
-# try to do a 'starttls' to the TIC server to see if that
-# is supported.
-requiretls false
-
-# PID File
-pidfile /var/run/aiccu.pid
-
-# Add a default route (default: true)
-defaultroute true
-
-# Script to run after setting up the interfaces (default: none)
-#setupscript /usr/local/etc/aiccu-subnets.sh
-
-# Make heartbeats (default true)
-# In general you don't want to turn this off
-# Of course only applies to AYIYA and heartbeat tunnels not to static ones
-#makebeats true
-
-# Don't configure anything (default: false)
-#noconfigure true
-
-# Behind NAT (default: false)
-# Notify the user that a NAT-kind network is detected
-#behindnat true
-
-# Local IPv4 Override (default: none)
-# Overrides the IPv4 parameter received from TIC
-# This allows one to configure a NAT into "DMZ" mode and then
-# forwarding the proto-41 packets to an internal host.
-# 
-# This is only needed for static proto-41 tunnels!
-# AYIYA and heartbeat tunnels don't require this.
-#local_ipv4_override
-
+config aiccu
+       option username         ''
+       option password         ''
+       option protocol         ''
+       option server           ''
+       option interface        ''
+       option tunnel_id        ''
+       option requiretls       ''
+       option defaultroute     '1'
+       option nat              '1'
+       option heartbeat        '1'
\ No newline at end of file

diff --git a/ipv6/aiccu/files/aiccu.init b/ipv6/aiccu/files/aiccu.init
index a82bc376d1d4574fa0e217df7db374d48e8ad3ec..a18e7963e801f77efe33e9954e1ee4b5539d32e1 100644 (file)
--- a/ipv6/aiccu/files/aiccu.init
+++ b/ipv6/aiccu/files/aiccu.init
@@ -2,8 +2,45 @@
 # Copyright (C) 2006 OpenWrt.org
 START=50
 
 # Copyright (C) 2006 OpenWrt.org
 START=50
 

+config_cb() {
+       local cfg_type="$1"
+       local cfg_name="$2"
+
+       case "$cfg_type" in
+               aiccu)
+                       append cfgs_sections "$cfg_name" "$N"
+               ;;
+       esac
+}
+

 start() {
 start() {

-       aiccu start     
+       config_load aiccu
+       for cfgs_section $cfgs_sections; do
+               config_get username $cfgs_section username
+               config_get password $cfgs_section password
+               config_get server $cfgs_section server
+               config_get protocol $cfgs_section protocol
+               config_get interface $cfgs_section interface
+               config_get tunnel_id $cfgs_section tunnel_id
+               config_get_bool requiretls $cfgs_section requiretls 0
+               config_get_bool defaultroute $cfgs_section defaultroute 1
+               config_get_bool nat $cfgs_section nat 1
+               config_get_bool heartbeat $cfgs_section heatbeat 1
+               mkdir -p /tmp/run
+               echo "username $username" > /tmp/run/aiccu-${cfgs_section}.conf
+               echo "password $password" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ -n "$server" ] && echo "server $server" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ -n "$protocol" ] && echo "protocol $protocol" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ -n "$interface" ] && echo "interface $interface" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ -n "$tunnel_id" ] && echo "tunnel_id $tunnel_id" >> /tmp/run/aiccu-${cfgs_section}.conf || echo "tunnel_id aiccu" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ "$requiretls" = "1" ] && echo "requiretls true" >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ "$defaultroute" != "1" ] && echo "defaultroute false >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ "$nat" = "1" ] && echo "behindnat true >> /tmp/run/aiccu-${cfgs_section}.conf
+               [ "$heartbeat" != "1" ] && echo "makebeats false" >> /tmp/run/aiccu-${cfgs_section}.conf
+               echo "pidfile /var/run/aiccu-${cfgs_section}.pid" >> /tmp/run/aiccu-${cfgs_section}.conf
+       
+               aiccu start /tmp/run/aiccu-$cfgs_section.conf
+       done

 }
 
 stop() {
 }
 
 stop() {