ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg
authorJohn Crispin <john@openwrt.org>
Wed, 16 Mar 2016 09:27:04 +0000 (09:27 +0000)
committerJohn Crispin <john@openwrt.org>
Wed, 16 Mar 2016 09:27:04 +0000 (09:27 +0000)
Some u-boot versions for QCA955x set currently not cleared bits depending
on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c
file is responsible to select the correct configuration bits and thus the
ath79_setup_qca955x_eth_cfg has to clear the unset.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
SVN-Revision: 49028

target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c

index b43c80a3762ddebe46d8443660714922165a2287..2f2825f94507f450834355517ffdacf26e7e0f3b 100644 (file)
@@ -833,14 +833,24 @@ void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd,
 void __init ath79_setup_qca955x_eth_cfg(u32 mask)
 {
        void __iomem *base;
-       u32 t;
+       u32 t, m;
+
+       m = QCA955X_ETH_CFG_RGMII_EN |
+           QCA955X_ETH_CFG_MII_GE0 |
+           QCA955X_ETH_CFG_GMII_GE0 |
+           QCA955X_ETH_CFG_MII_GE0_MASTER |
+           QCA955X_ETH_CFG_MII_GE0_SLAVE |
+           QCA955X_ETH_CFG_GE0_ERR_EN |
+           QCA955X_ETH_CFG_GE0_SGMII |
+           QCA955X_ETH_CFG_RMII_GE0 |
+           QCA955X_ETH_CFG_MII_CNTL_SPEED |
+           QCA955X_ETH_CFG_RMII_GE0_MASTER;
 
        base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
 
        t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
 
-       t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-
+       t &= ~m;
        t |= mask;
 
        __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);