ar71xx: Add support for AP147-010 reference board
authorJohn Crispin <john@openwrt.org>
Fri, 24 Jul 2015 09:09:42 +0000 (09:09 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 24 Jul 2015 09:09:42 +0000 (09:09 +0000)
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46457

15 files changed:
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.18
target/linux/ar71xx/config-4.1
target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/atheros.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default
target/linux/ar71xx/patches-3.18/813-MIPS-ath79-add-ap147-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch [new file with mode: 0644]

index 12c31c4..916ed97 100644 (file)
@@ -23,6 +23,9 @@ get_status_led() {
        ap136-020)
                status_led="ap136:green:status"
                ;;
+       ap147-010)
+               status_led="ap147:green:status"
+               ;;
        ap135-020)
                status_led="ap135:green:status"
                ;;
index d6f7d1a..2aced37 100644 (file)
@@ -46,6 +46,15 @@ ap113)
        ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
        ;;
 
+ap147-010)
+       ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1"
+       ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10"
+       ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08"
+       ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04"
+       ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
+       ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
+       ;;
+
 bullet-m | \
 nanostation-m | \
 rocket-m | \
index e7dc538..53b3a7f 100755 (executable)
@@ -46,6 +46,13 @@ ap136-010)
        ucidef_add_switch_vlan "switch0" "2" "5 6"
        ;;
 
+ap147-010)
+       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+       ucidef_add_switch_vlan "switch0" "2" "5 6"
+       ;;
+
 ap136-020 |\
 ap135-020 |\
 tl-wr1043nd-v2 |\
index e1c47ee..d5d5b60 100755 (executable)
@@ -365,6 +365,9 @@ ar71xx_board_detect() {
        *"AP143 reference board")
                name="ap143"
                ;;
+       *"AP147-010 reference board")
+               name="ap147-010"
+               ;;
        *AP81)
                name="ap81"
                ;;
index f11ea8c..d214e9b 100644 (file)
@@ -12,6 +12,7 @@ set_preinit_iface() {
        alfa-nx |\
        ap135-020 |\
        ap136-020 |\
+       ap147-010 |\
        ap83 |\
        archer-c5 |\
        archer-c7 |\
index 98e607c..22a43ed 100755 (executable)
@@ -179,6 +179,7 @@ platform_check_image() {
        ap136-010 | \
        ap136-020 | \
        ap135-020 | \
+       ap147-010 | \
        ap96 | \
        bxu2000n-2-a1 | \
        db120 | \
index bff8593..a2dfd75 100644 (file)
@@ -36,6 +36,7 @@ CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y
 CONFIG_ATH79_MACH_AP143=y
+CONFIG_ATH79_MACH_AP147=y
 CONFIG_ATH79_MACH_AP81=y
 CONFIG_ATH79_MACH_AP83=y
 CONFIG_ATH79_MACH_AP96=y
index de1f8b7..e13bee5 100644 (file)
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y
 CONFIG_ATH79_MACH_AP143=y
+CONFIG_ATH79_MACH_AP147=y
 CONFIG_ATH79_MACH_AP81=y
 CONFIG_ATH79_MACH_AP83=y
 CONFIG_ATH79_MACH_AP96=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c
new file mode 100644 (file)
index 0000000..7b45da4
--- /dev/null
@@ -0,0 +1,125 @@
+/*
+ *  Atheros AP147 reference board support
+ *
+ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *  Copyright (C) 2015 Sven Eckelmann <sven@open-mesh.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define AP147_GPIO_LED_WAN     4
+#define AP147_GPIO_LED_LAN1    16
+#define AP147_GPIO_LED_LAN2    15
+#define AP147_GPIO_LED_LAN3    14
+#define AP147_GPIO_LED_LAN4    11
+#define AP147_GPIO_LED_STATUS  13
+#define AP147_GPIO_LED_WLAN_2G 12
+
+#define AP147_GPIO_BTN_WPS     17
+
+#define AP147_KEYS_POLL_INTERVAL       20      /* msecs */
+#define AP147_KEYS_DEBOUNCE_INTERVAL   (3 * AP147_KEYS_POLL_INTERVAL)
+
+#define AP147_MAC0_OFFSET      0x1000
+
+static struct gpio_led ap147_leds_gpio[] __initdata = {
+       {
+               .name           = "ap147:green:status",
+               .gpio           = AP147_GPIO_LED_STATUS,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:wlan-2g",
+               .gpio           = AP147_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:lan1",
+               .gpio           = AP147_GPIO_LED_LAN1,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:lan2",
+               .gpio           = AP147_GPIO_LED_LAN2,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:lan3",
+               .gpio           = AP147_GPIO_LED_LAN3,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:lan4",
+               .gpio           = AP147_GPIO_LED_LAN4,
+               .active_low     = 1,
+       }, {
+               .name           = "ap147:green:wan",
+               .gpio           = AP147_GPIO_LED_WAN,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button ap147_gpio_keys[] __initdata = {
+       {
+               .desc           = "wps button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = AP147_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = AP147_GPIO_BTN_WPS,
+               .active_low     = 1,
+       }
+};
+
+static void __init ap147_setup(void)
+{
+       u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap147_leds_gpio),
+                                ap147_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP147_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap147_gpio_keys),
+                                       ap147_gpio_keys);
+
+       ath79_register_usb();
+
+       ath79_register_pci();
+
+       ath79_register_wmac(art + AP147_MAC0_OFFSET, NULL);
+
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       ath79_register_mdio(0, 0x0);
+
+       /* LAN */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_switch_data.phy_poll_mask |= BIT(4);
+       ath79_init_mac(ath79_eth1_data.mac_addr, art, 0);
+       ath79_register_eth(1);
+
+       /* WAN */
+       ath79_switch_data.phy4_mii_en = 1;
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+       ath79_eth0_data.speed = SPEED_100;
+       ath79_eth0_data.phy_mask = BIT(4);
+       ath79_init_mac(ath79_eth0_data.mac_addr, art, 1);
+       ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP147_010, "AP147-010", "Atheros AP147-010 reference board", ap147_setup);
index 091461d..5f6657c 100644 (file)
@@ -82,6 +82,16 @@ endef
 
 $(eval $(call Profile,AP143))
 
+define Profile/AP147
+       NAME:=Qualcomm Atheros AP147 reference board
+       PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage
+endef
+
+define Profile/AP147/Description
+       Package set optimized for the Atheros AP147 reference board.
+endef
+
+$(eval $(call Profile,AP147))
 
 define Profile/AP81
        NAME:=Atheros AP81 reference board
index ec394dd..e7d22f6 100644 (file)
@@ -1171,6 +1171,7 @@ ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),
 ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
 ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
 ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
+ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware)
 bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
 cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
 cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
@@ -2024,6 +2025,7 @@ $(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,1152
 $(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
 $(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
@@ -2178,6 +2180,7 @@ $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG
 $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
 $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
 $(eval $(call MultiProfile,AP143,AP143_8M AP143_16M))
+$(eval $(call MultiProfile,AP147,AP147_010))
 $(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
 $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
 $(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900))
index 79eb17f..de91e4b 100644 (file)
@@ -8,6 +8,7 @@
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set
+# CONFIG_ATH79_MACH_AP147 is not set
 # CONFIG_ATH79_MACH_AP81 is not set
 # CONFIG_ATH79_MACH_AP83 is not set
 # CONFIG_ATH79_MACH_AP96 is not set
index 626d676..50b6dbe 100644 (file)
@@ -7,6 +7,7 @@
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set
+# CONFIG_ATH79_MACH_AP147 is not set
 # CONFIG_ATH79_MACH_AP81 is not set
 # CONFIG_ATH79_MACH_AP83 is not set
 # CONFIG_ATH79_MACH_AP96 is not set
diff --git a/target/linux/ar71xx/patches-3.18/813-MIPS-ath79-add-ap147-support.patch b/target/linux/ar71xx/patches-3.18/813-MIPS-ath79-add-ap147-support.patch
new file mode 100644 (file)
index 0000000..2ca9a1e
--- /dev/null
@@ -0,0 +1,42 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -118,6 +118,19 @@ config ATH79_MACH_AP143
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP143 reference board.
++config ATH79_MACH_AP147
++      bool "Atheros AP147 reference board"
++      select SOC_QCA953X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select ATH79_DEV_AP9X_PCI if PCI
++      help
++        Say 'Y' here if you want your kernel to support the
++        QCA AP147 reference boards.
++
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
+       select SOC_AR913X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_ATH79_MACH_AP121)               += mach-
+ obj-$(CONFIG_ATH79_MACH_AP132)                += mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)                += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP143)                += mach-ap143.o
++obj-$(CONFIG_ATH79_MACH_AP147)                += mach-ap147.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_AP83)         += mach-ap83.o
+ obj-$(CONFIG_ATH79_MACH_AP96)         += mach-ap96.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -29,6 +29,7 @@ enum ath79_mach_type {
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
+       ATH79_MACH_AP143,               /* Atheros AP143 reference board */
++      ATH79_MACH_AP147_010,           /* Atheros AP147-010 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_AP83,                /* Atheros AP83 */
+       ATH79_MACH_AP96,                /* Atheros AP96 */
diff --git a/target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch b/target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch
new file mode 100644 (file)
index 0000000..2ca9a1e
--- /dev/null
@@ -0,0 +1,42 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -118,6 +118,19 @@ config ATH79_MACH_AP143
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP143 reference board.
++config ATH79_MACH_AP147
++      bool "Atheros AP147 reference board"
++      select SOC_QCA953X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      select ATH79_DEV_AP9X_PCI if PCI
++      help
++        Say 'Y' here if you want your kernel to support the
++        QCA AP147 reference boards.
++
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
+       select SOC_AR913X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_ATH79_MACH_AP121)               += mach-
+ obj-$(CONFIG_ATH79_MACH_AP132)                += mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)                += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP143)                += mach-ap143.o
++obj-$(CONFIG_ATH79_MACH_AP147)                += mach-ap147.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_AP83)         += mach-ap83.o
+ obj-$(CONFIG_ATH79_MACH_AP96)         += mach-ap96.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -29,6 +29,7 @@ enum ath79_mach_type {
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
+       ATH79_MACH_AP143,               /* Atheros AP143 reference board */
++      ATH79_MACH_AP147_010,           /* Atheros AP147-010 reference board */
+       ATH79_MACH_AP81,                /* Atheros AP81 reference board */
+       ATH79_MACH_AP83,                /* Atheros AP83 */
+       ATH79_MACH_AP96,                /* Atheros AP96 */